MultiquipメーカーMT54Fの使用説明書/サービス説明書
ページ先へ移動 of 48
OPERA TION AND P ARTS MANUAL THIS MANU AL MUST A CCOMP ANY THE EQUIPMENT A T ALL TIMES. T o find the latest re vision of this publication, visit our website at: www .
P A GE 2 — MT54F RAMMER — OPERA TION AND P AR TS MANUAL — REV . #8 (01/10/12) PROPOSITION 65 W ARNING.
MT54F RAMMER — OPERATION AND PARTS MANUAL — REV. #8 (01/10/12) — PAGE 3 NOTES.
P A GE 4 — MT54F RAMMER — OPERA TION AND P AR TS MANUAL — REV . #8 (01/10/12) MIKASA MT54F T amping Rammer Proposition 65 W ar ning ......................................... 2 T ab le Of Contents .................................................
MT54F RAMMER — OPERATION AND PARTS MANUAL — REV. #8 (01/10/12) — PAGE 5 www .multiquip .com Or dering par ts has never been easier! Choose fr om three easy options: WE A CCEPT ALL MAJOR CREDIT C.
P A GE 6 — MT54F RAMMER — OPERA TION AND P AR TS MANUAL — REV . #8 (01/10/12) Do not operate or service the equipment before reading the entire manual.
MT54F RAMMER — OPERATION AND PARTS MANUAL — REV. #8 (01/10/12) — PAGE 7 GENERAL SAFETY CA UTION NEVER operate this equipment without proper protectiv e clothing, shatter proof glasses, respiratory protection, hearing protection, steel-toed boots and other protective de vices required by the job or city and state regulations .
P A GE 8 — MT54F RAMMER — OPERA TION AND P AR TS MANUAL — REV . #8 (01/10/12) ENGINE SAFETY D ANGER The engine fuel e xhaust gases contain poisonous carbon mono xide. This gas is colorless and odorless, and can cause death if inhaled. The engine of this equipment requires an adequate free flow of cooling air .
MT54F RAMMER — OPERATION AND PARTS MANUAL — REV. #8 (01/10/12) — PAGE 9 TRANSPOR TING SAFETY CA UTION NEVER allo w any person or animal to stand underneath the equipment while lifting. NO TICE Bef ore lifting, make sure that the equipment par ts (hook and vibration insulator) are not damaged and scre ws are not loose or missing.
P A GE 10 — MT54F RAMMER — OPERA TION AND P ARTS MANU AL — REV . #8 (01/10/12) Definition of T amping Rammer The Mikasa MT -54F tamping rammer is a pow erful compacting tool capable of applying a tremendous force in consecutive impacts to a soil surface.
MT54F RAMMER — OPERATION AND PARTS MANUAL — REV. #8 (01/10/12) — PAGE 11 NOTE Specifications are general and are subject to change without notice. If exact measurements are required, equipment should be weighed and measured. s n o i t a c i f i c e p S r e m m a R F 4 5 - T M .
P A GE 12 — MT54F RAMMER — OPERA TION AND P ARTS MANU AL — REV . #8 (01/10/12) 8. Foot – Laminated wood with tempered steel plate for superior shock absorption. 9. Oil Level Sight Glass – Indicates the level of oil in the oil bath reservoir .
MT54F RAMMER — OPERATION AND PARTS MANUAL — REV. #8 (01/10/12) — PAGE 13 Figure 1-A. Engine Controls and Components INITIAL SER VICING The engine (Figure 1-A) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturer's Engine manual for instructions and details of operation and servicing.
P A GE 14 — MT54F RAMMER — OPERA TION AND P ARTS MANU AL — REV . #8 (01/10/12) CAUTION: CAUTION: CAUTION: CAUTION: CAUTION: F ailure to understand the operation of the MT - 54F T amping Rammer could result in se vere damage to the trowel or personal injury .
MT54F RAMMER — OPERATION AND PARTS MANUAL — REV. #8 (01/10/12) — PAGE 15 Inspection 1 . Check all n uts, bolts f asteners f or tig htness. Retigh ten as necessar y . 2 . Clean any dirt from the recoil starter and foot pedestal. Wipe the entire unit clean before operating.
P A GE 16 — MT54F RAMMER — OPERA TION AND P ARTS MANU AL — REV . #8 (01/10/12) Operation 1 . T o star t the r ammer tamping action, move the throttle le ver (Figure 10) quickly from IDLE (close) to the FULL OPEN position . DO NOT move the throttle lever slowly as this may cause damage to the clutch or spring.
MT54F RAMMER — OPERATION AND PARTS MANUAL — REV. #8 (01/10/12) — PAGE 17 Maintenance P erf or m the scheduled maintenance procedures as indicated: D AIL Y ■ Thoroughly remove dirt and oil from the engine and control area. Clean or replace the air cleaner elements as necessary .
P A GE 18 — MT54F RAMMER — OPERA TION AND P ARTS MANU AL — REV . #8 (01/10/12) MT -54F — TR OUBLESHOO TING GUIDE G N I T O O H S E L B U O R T E N I G N E .
MT54F RAMMER — OPERATION AND PARTS MANUAL — REV. #8 (01/10/12) — PAGE 19 MT -54F — TROUBLESHOO TING GUIDE ENGINE ENGINE ENGINE ENGINE ENGINE d e u n i t n o c ( G N I T O O H S E L B U O R T E N I G N E . 4 E L B A T ) M O T P M Y S M E L B O R P E L B I S S O P N O I T U L O S y r o t c a f s i t a s t o n n o i t a r e p O .
P A GE 20 — MT54F RAMMER — OPERA TION AND P ARTS MANU AL — REV . #8 (01/10/12) The f ollowing section e xplains the different symbols and remarks used in the P ar ts section of this manual. Use the help numbers f ound on the back page of the manual if there are any questions .
MT54F RAMMER — OPERATION AND PARTS MANUAL — REV. #8 (01/10/12) — PAGE 21 MT -54F RAMMER 1 T O 3 UNITS Qt y . P/ N Description 1 ............ 956225020 ............ LEVER, THR OTTLE 3 ............ 354030030 ............ ELEMENT , YELLOW 3 .......
P A GE 22 — MT54F RAMMER — OPERA TION AND P ARTS MANU AL — REV . #8 (01/10/12) NAMEPLA TE AND DECALS 3 Mikasa Mikasa MT -54F 4 10 11 1 2 T o start, switch must be in the “ ” position ON NPA .
MT54F RAMMER — OPERATION AND PARTS MANUAL — REV. #8 (01/10/12) — PAGE 23 NO P AR T NO P AR T NAME QTY . REMARKS 1 * 920202930 DECAL: ST AR T SWITCH 1 NP A-293 2 * 920200900 DECAL: 3400 ~ 3600 RP.
P A GE 24 — MT54F RAMMER — OPERA TION AND P ARTS MANU AL — REV . #8 (01/10/12) CRANKCASE AND ENGINE ASSY ..
MT54F RAMMER — OPERATION AND PARTS MANUAL — REV. #8 (01/10/12) — PAGE 25 CLUTCH GUIDE / A 1 4 5 0053204201 WOODRUFF KEY 1 4 6 301010210 LOCK W ASHER CLUTCH 1 4 7 956300130 THROTTLE LEVER A Y 25 1 NO P AR T NO P AR T NAME QTY .
P A GE 26 — MT54F RAMMER — OPERA TION AND P ARTS MANU AL — REV . #8 (01/10/12) MT -54F — CRANKCASE AND ENGINE ASSY . CRANKCASE AND ENGINE ASSY .
MT54F RAMMER — OPERATION AND PARTS MANUAL — REV. #8 (01/10/12) — PAGE 27 MT -54F — CRANKCASE AND ENGINE ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 3 0 0053204201 WOODRUFF KEY 1 3 1 30101021.
P A GE 28 — MT54F RAMMER — OPERA TION AND P ARTS MANU AL — REV . #8 (01/10/12) GUIDE CYLINDER AND FOOT ASSY . 100.
MT54F RAMMER — OPERATION AND PARTS MANUAL — REV. #8 (01/10/12) — PAGE 29 NO P AR T NO P AR T NAME QTY . REMARKS 1 351420390 PISTON PIN 1 2 080100120 STOP RING R-12 2 3 351324120 P IS TO N R OD 1 4 351420400 PISTON END 1 5 020116130 NUT M16, P1.
P A GE 30 — MT54F RAMMER — OPERA TION AND P ARTS MANU AL — REV . #8 (01/10/12) MT -54F — T ANK AND HANDLE ASSY . T ANK AND HANDLE ASSY ..
MT54F RAMMER — OPERATION AND PARTS MANUAL — REV. #8 (01/10/12) — PAGE 31 NO P AR T NO P AR T NAME QTY . REMARKS A 305910030 FUEL T ANK ASSY .,2L ............................. 1 .......... INCLUDES ITEMS W/ % 1 351337070 SHOCK ABSORBER ..........
P A GE 32 — MT54F RAMMER — OPERA TION AND P ARTS MANU AL — REV . #8 (01/10/12) ROBIN EH-09 ENGINE — CRANKCASE ASSY . ROBIN EH09 ENGINE — CRANKCASE ASSY .
MT54F RAMMER — OPERATION AND PARTS MANUAL — REV. #8 (01/10/12) — PAGE 33 ROBIN EH-09 ENGINE — CRANKCASE ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 0 2741010121 CRANKCASE CP .
P A GE 34 — MT54F RAMMER — OPERA TION AND P ARTS MANU AL — REV . #8 (01/10/12) ROBIN EH09 ENGINE — CRANKSHAFT AND PISTON ASSY ..
MT54F RAMMER — OPERATION AND PARTS MANUAL — REV. #8 (01/10/12) — PAGE 35 NO P AR T NO P AR T NAME QTY . REMARKS 1 0 2742010131 CRANKSHAFT CP 1 4 0 0230200100 S P A CER T=0.8 1 0230200110 S P A CER T=1.0 1 0230200120 S P A CER T=1.2 1 5 0 0021812000 NU T 1 6 0 030212300 SPRING W ASHER .
P A GE 36 — MT54F RAMMER — OPERA TION AND P ARTS MANU AL — REV . #8 (01/10/12) ROBIN EH09 ENGINE — INT AKE AND EXHAUST ASSY ..
MT54F RAMMER — OPERATION AND PARTS MANUAL — REV. #8 (01/10/12) — PAGE 37 NO P AR T NO P AR T NAME QTY . REMARKS 1 0 2743170101 C AM S HAFT CP 1 INCLUDES ITEMS W/ % 35 % 2743640103 RELEASE LEVER .
P A GE 38 — MT54F RAMMER — OPERA TION AND P ARTS MANU AL — REV . #8 (01/10/12) ROBIN EH09 ENGINE — GOVERNOR ASSY ..
MT54F RAMMER — OPERATION AND PARTS MANUAL — REV. #8 (01/10/12) — PAGE 39 NO P AR T NO P AR T NAME QTY . REMARKS 1 0 2744230103 GO VERNOR LEVER 1 2 0 2304220103 GO VERNOR SHAFT 1 3 0 2744270103 GO VERNOR ROD 1 4 0 1064280113 ROD SPRING 1 5 0 0031305000 CLIP 2 6 0 0011406250 B OL T AND WASHER ASSY .
P A GE 40 — MT54F RAMMER — OPERA TION AND P ARTS MANU AL — REV . #8 (01/10/12) ROBIN EH09 ENGINE — RECOIL ST AR TER ASSY ..
MT54F RAMMER — OPERATION AND PARTS MANUAL — REV. #8 (01/10/12) — PAGE 41 NO P AR T NO P AR T NAME QTY . REMARKS 1 0 2745120211 BLOWER HOUSING CP 1 1 1 2745510121 B L O WER H. BKT . 1 CP 1 1 2 2745520101 B L O WER H. BKT . 2 CP 1 1 3 0110060020 FLANGE BOL T 2 1 4 0011606140 B O L T AND WASHER ASSY .
P A GE 42 — MT54F RAMMER — OPERA TION AND P ARTS MANU AL — REV . #8 (01/10/12) ROBIN EH09 ENGINE — CARBURETOR ASSY ..
MT54F RAMMER — OPERATION AND PARTS MANUAL — REV. #8 (01/10/12) — PAGE 43 NO P AR T NO P AR T NAME QTY . REMARKS 21 0 2746230100 CARBURET OR ASSY .
P A GE 44 — MT54F RAMMER — OPERA TION AND P ARTS MANU AL — REV . #8 (01/10/12) ROBIN EH09 ENGINE — ELECTRIC DEVICE ASSY ..
MT54F RAMMER — OPERATION AND PARTS MANUAL — REV. #8 (01/10/12) — PAGE 45 NO P AR T NO P AR T NAME QTY . REMARKS 1 0 2307020831 FL YWHEEL CP 1 1 1 2747020101 IGNITION COIL CP 1 3 0 0011706250 B OL T & W ASHER ASSY . 2 6 0 0660000361 S WI TC H ASSY .
P A GE 46 — MT54F RAMMER — OPERA TION AND P ARTS MANU AL — REV . #8 (01/10/12) TERMS AND CONDITIONS OF SALE — P AR TS P A YMENT TERM S T er ms of payment for parts are net 3 0 days. FREIGHT P OLICY All parts orders will be shipped collect or prepaid with the c harges ad ded to the invoice.
MT54F RAMMER — OPERATION AND PARTS MANUAL — REV. #8 (01/10/12) — PAGE 47 NOTES.
OPERA TION AND P AR TS MANUAL Y our Local Dealer is: HERE’S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED ST A TES Multiquip Corporate Office MQ P ar ts Depar tment 18910 Wi lm i ngton A v e . C ars on, C A 90746 Cont a ct : mq@mult i qu i p .
デバイスMultiquip MT54Fの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Multiquip MT54Fをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMultiquip MT54Fの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Multiquip MT54Fの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Multiquip MT54Fで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Multiquip MT54Fを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMultiquip MT54Fの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Multiquip MT54Fに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMultiquip MT54Fデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
