MultiquipメーカーWM45HCEの使用説明書/サービス説明書
ページ先へ移動 of 40
OPERA TION AND P AR TS MANUAL THIS MANU AL MUST A CCOMP ANY THE EQUIPMENT A T ALL TIMES. T o find the latest re vision of this publication, visit our website at: www .
P A GE 2 — WM45HCE PLASTER/MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) FUEL AND CHEMICAL W ARNING Gasoline engine exhaust and some of its constituents, and some dust crea.
WM45HCE PLASTER MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) — P AGE 3 Grinding/cutting/drilling of masonry , concrete, metal and other materials with silica in their composition may give off dust or mists containing crystalline silica.
P A GE 4 — WM45HCE PLASTER/MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) T ABLE OF CONTENTS WM45HCE PLASTER/MOR T AR MIXER Fuel And Chemical Warnings .................................. 2 Silicosis/Respiratory W ar nings ...
WM45HCE PLASTER MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) — P AGE 5 P AR TS ORDERING PROCEDURES www .multiquip .com Or dering par ts has never been easier! Choose fr om.
P A GE 6 — WM45HCE PLASTER/MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) SAFETY INFORMA TION Do not operate or ser vice the equipment before reading the entire manual. Safety precautions should be f ollowed at all times when operating this equipment.
WM45HCE PLASTER MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) — P AGE 7 SAFETY INFORMA TION GENERAL SAFETY CA UTION NEV ER ope ra te this equ ipm ent wit hou t pro per .
P A GE 8 — WM45HCE PLASTER/MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) SAFETY INFORMA TION MIXER SAFETY D ANGER N E V E R o pe r a t e th e eq u i p m e n t i n a n e xp l o s i v e a t m o sp h er e o r ne ar c o m b us ti b l e ma te ri a l s .
WM45HCE PLASTER MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) — P AGE 9 SAFETY INFORMA TION FUEL SAFETY D ANGER DO NOT add fuel to equipment if it is placed inside tr uck bed with plastic liner . P ossibility exists of e xplosion or fi re due to static electricity .
P A GE 10 — WM45HCE PLASTER/MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) SPECIFICA TIONS T able 1. Mixer Specifications Capacity 4.0 cu. ft (113 liters) Bag Capacity 1-1/2 to 2-1/2 bags W eight 380 lbs. (172 kg.) Height W/Dump Handle 47 in.
WM45HCE PLASTER MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) — P AGE 11 DIMENSIONS T able 3. Mixer Dimensions Reference Designator Dimension in.
P A GE 12 — WM45HCE PLASTER/MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) GENERAL INFORMA TION GENERAL The MQ Model WM45HCE plaster and mor tar mixer is sh ipp ed comp le tel y as sem b led and has been f act ory test ed. The drum batch capacity of this mix ers is between 1.
WM45HCE PLASTER MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) — P AGE 13 COMPONENTS Figure 2 illustrates the basic components and controls of the WM45HCE mix er . 1. Lifting Handle Bars — Use these handle bars to lift and maneuv er the mixer .
P A GE 14 — WM45HCE PLASTER/MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) 6. Choke Lever — Used in the star ting of a cold engine, or in cold weather conditions. The choke enriches the fuel mixture. 7. Air Cleaner — Prev ents dir t and other debr is from entering the fuel system.
WM45HCE PLASTER MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) — P AGE 15 PRE-INSPECTION (ENGINE/MIXER) BEFORE ST ARTING 1 . Read safety instr uctions at the beginning of manual. 2. Clean the mixer , removing dir t and dust, par ticular ly the engine cooling air inlet, carburetor and air cleaner .
P A GE 16 — WM45HCE PLASTER/MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) INITIAL ST AR T -UP (ENGINE) CA UTION DO N OT attempt to operate the mix er until the Safety , General Information and Inspection sections of this manual have been read and thoroughl y understood.
WM45HCE PLASTER MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) — P AGE 17 INITIAL ST AR T -UP (ENGINE) ST OPPING THE ENGINE Normal Shutdown 1. Mov e the throttle lev er to the IDLE position (Figure 14) and run the engine for three minutes at lo w speed.
P A GE 18 — WM45HCE PLASTER/MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) ENGINE MAINTENANCE P erform engine maintenance procedures as referenced b y T able 5 below: T able 5.
WM45HCE PLASTER MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) — P AGE 19 MAINTENANCE P erform the engine maintenance procedures as indicated below: Daily 1. Thoroughly remove dir t and oil from the engine and control area. Clean or replace the air cleaner elements as necessar y .
P A GE 20 — WM45HCE PLASTER/MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) MAINTENANCE (MIXER) Drum Head Seals There is 1 set of drum head seals (Figure 20) that will require lubrication.
WM45HCE PLASTER MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) — P AGE 21 Main Gear and Drive Pinion Alignment 1. Disconnect the spark plug wire. In addition make sure the clutch engagement le ver is dis-engaged to reliev e V -belt tension.
P A GE 22 — WM45HCE PLASTER/MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) TROUBLESHOOTING (ENGINE) Pract icall y a ll break downs can be pr e vented by p roper handling and.
WM45HCE PLASTER MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) — P AGE 23 TROUBLESHOOTING (ENGINE/MIXER) T roubleshooting (Mixer) Symptom Possible Pr oblem Solution Blades will not rotate. W or n or def ective main gear? Check main gear .
P A GE 24 — WM45HCE PLASTER/MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) The follo wing section explains the diff erent symbols and remarks used in the P ar ts section of this manual. Use the help number s f ound on the bac k page of the man ual if there are any questions .
WM45HCE PLASTER MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) — P AGE 25 SUGGESTED SP ARE P AR TS WM45HCE PLASTER/MORT AR MIXER WITH HOND A GX160UT1HX2 ENGINE 1 to 3 units Qty . P/N Description 2............491010 .........
P A GE 26 — WM45HCE PLASTER/MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) NAMEPLA TE AND DECALS 2 3 4 L 105 dB P/N 520916 WA 2 1 P/N 521304 6 5 5 MO DEL SE RIA L NO .
WM45HCE PLASTER MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) — P AGE 27 NAMEPLA TE AND DECALS NO . P ART NO . P ART NAME QTY .
P A GE 28 — WM45HCE PLASTER/MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) STEEL TUB ASSY . 37 77 42 48 42 20 80 81 2 39 73 74 69 70 71 22 66 79 3 64 65 65 65 67 67 67 63 63.
WM45HCE PLASTER MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) — P AGE 29 STEEL TUB ASSY . NO . P ART NO . P ART NAME QTY . REMARKS 2# 26084-352 DR UM 1 3 26085-351 GRA TE, .
P A GE 30 — WM45HCE PLASTER/MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) P ADDLE SHAFT ASSY ..
WM45HCE PLASTER MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) — P AGE 31 P ADDLE SHAFT ASSY . NO . P ART NO . P ART NAME QTY .
P A GE 32 — WM45HCE PLASTER/MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) FRAME ASSY ..
WM45HCE PLASTER MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) — P AGE 33 FRAME ASSY . NO . P ART NO . P ART NAME QTY . REMARKS 1 EM98195 GRIP , R UBBER BLACK 4 2 530467 HAN.
P A GE 34 — WM45HCE PLASTER/MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) ENGINE COVER ASSY ..
WM45HCE PLASTER MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) — P AGE 35 ENGINE COVER ASSY . NO . P ART NO . P ART NAME QTY . REMARKS 1 07028-057 COTTER PIN 5/32 x 1/2 2 2 18604-005 RET AINER CHAIN 1 3 26922-351 ENGINE HOUSE ASSY .
P A GE 36 — WM45HCE PLASTER/MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) ENGINE/GUARD ASSY ..
WM45HCE PLASTER MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) — P AGE 37 ENGINE/GUARD ASSY . NO . P ART NO . P ART NAME QTY .
P A GE 38 — WM45HCE PLASTER/MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) TERMS AND CONDITIONS OF SALE — P AR TS P A YME NT TERM S T er ms of payment for par ts are net 30 d ay s. FREIG HT POLICY Al l p ar ts or d er s wi ll be s hi pp e d c o ll ec t or prepaid with the charges added to the invoice.
WM45HCE PLASTER MORT AR MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (02/04/13) — P AGE 39 NOTES.
OPERA TION AND P AR TS MANUAL Y our Local Dealer is: HERE’S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING United St a teS Multiquip Corporate Office MQ P ar ts Department 18910 Wilmington A ve. Carson, CA 90746 Contact: mq@multiquip .
デバイスMultiquip WM45HCEの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Multiquip WM45HCEをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMultiquip WM45HCEの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Multiquip WM45HCEの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Multiquip WM45HCEで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Multiquip WM45HCEを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMultiquip WM45HCEの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Multiquip WM45HCEに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMultiquip WM45HCEデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
