MuratecメーカーF-100の使用説明書/サービス説明書
ページ先へ移動 of 115
Operating Instructions For Muratec’s F-150, F-120 and F-100 plain-paper fax machines.
MBS order number: OMF120/100 Muratec America, Inc. 6400 International Parkway Suite 1500 Plano, Texas 75093 http://www.muratec.com MML item number: D65-90140-60 059815.
Welcome ….
As an E NERGY S TAR ® partner, Muratec America, Inc., has determined that this product meets the E NERGY S TAR guidelines for energy efficiency. Copyright © 1998 by Muratec America, Inc.; all rights reserved. Muratec, the Muratec logo and all Muratec fax product names contained herein are trademarks of Muratec America, Inc.
We know you want to use your machine now, without first having to climb over a mountain of jargon. So we’ve divided these instructions into three sections. • “Getting started” (see page 1.1) covers only what you absolutely have to know to use your machine immediately.
What’s in these operating instructions Note: Each section also contains its own (more abbreviated) table of contents, as well. Getting started What’s in this section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Basket cases: batch transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.24 Creating or modifying a batch box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.24 Erasing an empty batch box . . . . . . . . . . . . .
Getting started A quick and friendly trip through the basics of your Muratec fax machine.
1.1 Getting started A quick introduction to fax in general . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Make sure it’s all out of the packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 What are all the parts? .
The drawing, below, shows what should be included in the packaging: 1 Fax machine 6 Telephone line cord 2 Document hopper 7 Toner cartridge 3 Paper hopper 8 Drum cartridge 4 Document tray 9 (This manual) 5 AC power cord Be sure to save the box (or boxes) and packing materials for reshipment.
7 Scanner cover release — Pull up on this to open the scanner cover . 8 Scanner cover — Open this (by using the scanner cover release) to provide access to the original document (what you put into the machine for faxing or copying) during occasional jams.
Here’s a brief description of the keys on your fax machine and what they do, as well as a look at your machine’s indicator lights and their meanings. Important: Some of the functions we’ll mention, here, are covered in the “Beyond the basics” section.
15 START — Begins a manual fax transmission or reception. 16 COPY — Press this key to make one copy, or multiple copies of a document. 17 STOP — An all-purpose “Whoa!” key. Stops the current operation, ejects a doc- ument from the document feeder and cancels alarms.
1.6 Getting started Pick an installation spot before going ahead Where should you install your fax machine? The location should be: • Clean — Dust buildup can damage your machine. (However, do not use a cover! See next item.) • In the open — Allow at least 12 ″ of clearance around your machine.
4 Unpack the toner cartridge from its carton. Then, holding the toner cartridge with both hands, shake it well as shown (note the arrows). 5 Install the toner cartridge in the printer, making sure that the cartridge’s four pins (two each at the front and rear sides) fit in the slits inside the printer frame.
Attach the paper-handling parts 1 Attach the document tray by inserting it into the appropriate holes, as shown. 2 Attach the paper hopper into the appropriate hole, as shown.
1.9 Getting started 2 If the volume you hear is satisfactory, skip to step 4. Otherwise, go on to step 3. 3 Adjust the volume as you wish: To turn the volume up, press / PROGRAM . To turn the volume down, press . The display, or LCD , indicates the volume.
1.10 Getting started Your Muratec fax machine comes with EasyStart. It guides you in entering the bare-bones settings required for normal operation — so it’s easy for you to start using your machine quickly. (Of course, you can make other settings later or change these settings.
1.11 Getting started 4 The LCD now asks whether you want to set the calendar/clock for automatic recognition of daylight saving time ( DST ). When the setting is On, your machine automatically will set itself to DST or to standard time, depending upon the calendar setting, at 2 AM on the appropriate “switchover” Sundays each year.
1.12 Getting started 13 To change the setting, press or / PROGRAM once or twice until your choice appears (here, we’ve changed the setting to Pulse mode): 14 Press ENTER to save the setting and continue.
1.13 Getting started Some guidelines How big — and small — your pages can be While you’ll probably be sending normal-sized documents the vast majority of the time, you can fax a piece of paper a.
1.14 Getting started Changing the pause length The pause is set by the factory to last five seconds, but you can set it to last as long as ten seconds if necessary. If you find the five-second pause is satisfactory when you use it with your phone system, do not make this change.
1.15 Getting started You can set your fax always to transmit from memory as a default. Note: Whichever choice you make, you can override that choice one transmission at a time by pressing MEMORY TRANSMIT . After completing the communica- tion, your fax will return to your desired transmission setting.
1.16 Getting started Sending a fax with on-hook dialing or a handset You also can fax a document by dialing using either the monitor speaker (This is called “on-hook” dialing) or the optional handset. Notes: On an F-150, faxing this way disables “V.
1.17 Getting started To redial a voice call (using the optional handset) manually: 1 Obtain a dial tone: either press MONITOR / CALL or lift the optional handset. 2 Press REDIAL / PAUSE . When the other person answers, speak to him/her on the optional handset.
1.18 Getting started So what’s the big deal, anyway?!? That may be what you’re wondering, upon seeing the title above. After all, telling you how to send faxes is one thing, but — as long as the fax machine is running and has paper installed — why spend time on explaining how to receive faxes? Well, you have a point.
1.19 Getting started Tel Ready mode: when Auto Answer is off Use it if: • You intend to use the same line for both fax and phone calls and • You’re using, on that line, at least one other phone which is not connected to your fax machine and • You have installed an optional handset on your fax machine.
1.20 Getting started Fax Ready mode Use it if: You have your fax machine installed on a “dedicated” line (one it doesn’t share with a second phone). In this mode: Your fax machine answers each incoming call after a certain num- ber of rings (see page 2.
Beyond the basics We’ve covered the “musts.” Now, let’s explore the goodies..
Beyond the basics Getting everything just the way you want it . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 Autodialer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.
Beyond the basics The EasyStart feature guided you through the “just-gotta” settings on your machine. In the next few pages, we’ll cover other settings.
Using U 4/ CODE to enter characters Certain settings give you a chance to enter some kind of identifying name. As explained earlier (page 1.11), you can do this with the one-touch keys. But you may also use the U 4/ CODE key in combination with other keys to produce a wide variety of characters, as well as regular letters and numbers.
Reduction margin Your fax machine’s reduction margin is measured in millimeters (mm). We’ll define it by explaining how it’s used: When a fax message enters your machine’s electronic brain, the machine measures the message’s length and compares it to (a) the length of your selected paper plus (b) the reduction margin you set.
2.5 Beyond the basics 1 Press / PROGRAM , J , 0, 3, ENTER . The LCD shows the current copy reduction rate: If the setting you see is acceptable, skip to step 3. Otherwise, proceed to step 2. 2 To change the setting, press or / PROGRAM repeatedly until your chosen reduction setting appears.
2.6 Beyond the basics Setting silent mode If you and your fax machine share a quiet place, you’ll really appreciate being able to put the machine into silent mode. This mutes both the ringer and the “I’m done!” beep your machine makes after sending or receiving a fax or making a copy.
2.7 Beyond the basics Setting the language While English is the language in which your machine initially is set to display mes- sages and print reports, you can set it to “speak” French or Spanish, too! As you give the order for the machine to change languages, it “rolls” from English to French to Spanish and then back to English.
Beyond the basics Your fax machine’s autodialer is one of its most versatile features. It stores your most frequently called phone and fax numbers for instant recall so you don’t have to remember them.
Beyond the basics characters (such as a long-distance DIALING OPTIONS (3 times), carrier’s access code) which must be in then / PROGRAM (once) DTMF tone.
Beyond the basics The machine now is prompting you for a name — a Location ID , remember? — so you’ll be able to find it easily in the EasyDial directory (see pages 2.15–2.16). If you do not wish to enter or change this number’s Location ID , skip to step 11.
Beyond the basics 3 Toggle between transmission from the feeder or from memory if necessary, by pressing MEMORY TRANSMIT . 4 Press the one-touch key in which you’ve stored the number.
Beyond the basics 2 Press the one-touch key in which you’ve stored the number. As the machine dials, it will show the number on the LCD : Note: Remember that your fax machine’s monitor speaker is .
Beyond the basics 5 Use the numeric keypad to enter the speed-dial number exactly as your machine should dial it, including whatever access codes your phone system may require. (You may want to review “Special dialing characters,” page 2.8.) The number can be up to 40 characters in length: Your display can show only 20 characters at a time.
Beyond the basics 12 The LCD now displays: or You may now designate up to 32 call groups to which this number will belong. (If necessary, review “Considering call groups,” page 2.9.) If you do not wish to change this number’s call group status, skip to step 14.
Beyond the basics Phoning via speed-dial To dial a phone call using a speed-dial number, you must have an optional handset attached to your machine. Here’s how to make the call: 1 Obtain a dial tone by doing one of the following: • Lifting the handset • Press MONITOR / CALL to use the monitor speaker 2 Press SPEED DIAL / TEL INDEX .
Beyond the basics EasyDial directory dialing The EasyDial directory dialing feature makes your autodialer even more like an electronic phone book. EasyDial sorts and displays numbers alphabetically accord- ing to their Location ID s, so you can easily find them and dial them.
Beyond the basics As you’ve probably guessed by now, your fax machine is a dandy phone, too! Let’s see just how dandy by looking briefly at the machine’s telephone features. Important: All of the instructions on this page assume you have attached an optional handset to your fax machine.
Beyond the basics The basics of broadcasting The fastest way to fax one document to multiple recipients is broadcasting — and your fax machine has very powerful broadcasting capabilities. You can use broad- casting from any function requiring the entry of a fax number! That means you can perform delayed broadcasting (see pages 2.
Beyond the basics Relay broadcasting and relay broadcast initiation Relay broadcasting is a powerful function that takes advantage of a remote Muratec “hub” fax machine’s memory to reduce your total communication costs.
Beyond the basics 7 Use the numeric keypad to enter the day of the month and time when you want to begin initiating the relay broadcast. When the entry is complete, press ENTER . 8 Press START . If, in step 6, you chose an immediate relay broadcast initiation, your fax machine will begin dialing the remote “hub” machine.
Beyond the basics Take advantage of lower evening and weekend long-distance rates with delayed transmission. Your fax machine can store up to 99 delayed transmission commands, each of which you can program up to 31 days in advance.
Beyond the basics Reviewing or cancelling delayed commands If you’ve stored a delayed command in your fax machine, it will hold it in memory until it either completes the command successfully or reaches its maximum number of redial attempts (see pages 1.
Beyond the basics Printing a delayed command list Can’t remember some details about a delayed transmission command you set up? Or, let’s say, someone else in your office is the one who set it up, .
Beyond the basics Broadcasting (see pages 2.18–2.20) gets the same document to multiple locations, but what about the reverse? Wouldn’t it be nice if you could just stack several docu- ments into an electronic “basket” and then fling the entire contents of that basket via fax to one location? Well, you can: it’s called batch transmission.
Beyond the basics 8 When the date and time are as you wish, press ENTER . 9 The LCD now displays: or The machine now is prompting you for a name for this batch box. If you do not wish to enter or change this batch box’s name, skip to step 11. If you do wish to enter or change this batch box’s name, proceed to step 10.
Beyond the basics To erase another batch box, repeat steps 2–5. To finish, press STOP . Printing a list of your batch boxes You can easily print a list of your batch boxes. The list includes each box’s identifier number, the Location ID (if any), fax number and date/time of start.
Beyond the basics Erasing a document stored in a batch box It’s easy to erase a document stored in a batch box set up on your fax machine: 1 Press / PROGRAM , N , 6, ENTER . The LCD will show: 2 Use the numeric keypad to enter the number ( 1–5) of the batch box currently “holding” the document you wish to erase.
Beyond the basics Your fax machine has numerous special features to make your communications eas- ier. We’ll cover them here. Cover page For your greater convenience, your fax machine can store a cover page to send at the beginning of each outgoing fax.
Beyond the basics Entering the cover page message 1 Press / PROGRAM , K , 2, ENTER . 2 Now, use the one-touch keypad to enter a message for the cover page. The message can be up to 40 characters in length. You enter the message the same way you entered your fax name during EasyStart.
Beyond the basics Setting the reports: TCR s and RCR s You can set your fax machine to print reports. There are two different reports: a transmit confirmation report ( TCR ) and a receive confirmation report ( RCR ).
Beyond the basics Polling Polling allows someone to fax a document to you without the other person having to make (and pay for) the call. Your machine can perform: • Regular polling — Retrieves a document from the remote fax machine.
Beyond the basics Your machine will dial the number and, upon making contact with the other machine, begin receiving the file(s) as if the other machine had placed the call.
Beyond the basics 2.33 5 If you are storing this document for regular polling, skip to step 7. If you are storing this document for database polling, proceed to step 6. 6 Use the numeric keypad to enter a one- or two-digit database file number to identify the stored document.
Beyond the basics 2.34 In order that you may use OneLine + DRD , your phone company must set up your distinctive ring service. When it does, it will assign a ring pattern, expressed in time .
Beyond the basics Faxing/receiving first, then talking To send or receive a fax first and then talk: 1 While your fax machine is sending or receiving the fax, press MONITOR / CALL . 2 At the remote fax machine, the ringer will ring after that machine receives each page.
Beyond the basics Programmable one-touch keys Using the power of programmable one-touch keys The programmable one-touch keys P 1– P 12 simplify complex fax operations, letting you really tap into your machine’s power.
Beyond the basics 2 Select the key in which you want to program a command or change a previ- ously stored command — if necessary, turn the fliptab to see it, as described earlier — and then press it.
Beyond the basics 2 Select the key in which you want to program a command or change a previ- ously stored command — if necessary, turn the fliptab to see it, as described earlier — and then press it.
Beyond the basics To program a SecureMail transmission into a programmable one-touch key: 1 Press / PROGRAM , C , 1, ENTER . The LCD either shows: … or indicates a command already is programmed into this key. If P 01 is the key you want to program, skip to step 3.
Beyond the basics Programming a relay broadcast initiation Note: To erase a programmable one-touch key, refer to page 2.43. Note: For this operation to work, three things must be true: • The remote fax machine must be a Muratec fax machine (other than an F-86) with “hub” capability.
Beyond the basics 9 There’s a choice to make. Instruct your fax to carry out this delayed command in one of the following ways: Option 1: Perform the command once at a certain time on a certain day of the month. (For example, “Do this at 5:05 PM on the 30th.
Beyond the basics 6 Now, while you still can see the fax number on the LCD , press COMMUNICATION OPTIONS four times and then press ENTER . The LCD shows: If performing regular ( not database) polling, press ENTER and skip to step 8. 7 Use the numeric keypad to enter the one- or two-digit identifier for each database file you want to poll.
Beyond the basics 4 Do not enter any characters here (if you do, you can’t program a batch trans- mission into this key). Instead, only press ENTER and then proceed to step 5. Note: If you accidentally enter any characters here, press CANCEL as many times as needed to erase all of them before you proceed to step 5.
Beyond the basics To print the list, press / PROGRAM , C , 3, ENTER . Keeping things secure 2.44 Printing a list of your programmable one-touch keys You fax machine can print a list of the commands you’ve stored in your programmable one-touch keys.
Beyond the basics Your machine has a number of features to enhance the security of your fax commu- nications. These security features can help you let your private fax documents stay private, avoid unwanted outside communication and even protect against unautho- rized use of your machine — as well as control its authorized use.
Beyond the basics Using your fax machine during operation protection 1 When you press any key on your machine, the LCD will show: 2 Use the numeric keypad to enter the four-digit passcode (here, we’ve entered the passcode we set previously; see page 2.
Beyond the basics Printing from (and turning off) security reception When security reception is active, an incoming fax goes directly into your machine’s memory (but is not printed) and lights the MEMORY RECEIVE light.
Beyond the basics 6 A mailbox’s name may be up to 16 characters in length. You enter the name the same way you entered your fax name during EasyStart. We’ll review the process, here. (If you’re changing a previously entered name, see the note at the end of this step.
Beyond the basics Printing SecureMail you receive When your fax machine receives a SecureMail document from another Muratec fax machine, your machine will print a message alerting the person for whom the docu- ment is intended.
Beyond the basics 8 What you do now depends upon when you wish the transmission to begin. • To have it begin now, skip to step 11. • To delay it, proceed to step 9. 9 Press COMMUNICATION OPTIONS , ENTER . The LCD will show: 10 Use the numeric keypad to enter the day and time when the SecureMail transmission should begin, then press ENTER .
Beyond the basics 5 To change the setting, press or / PROGRAM repeatedly until your desired setting appears. In this example, we’ve chosen “Mode1.” 6 Press ENTER . Autodialing while using the PIN mask Note: The following instructions presume you are familiar with how to set and use your machine’s autodialer.
Beyond the basics Dialing from the numeric keypad while using the PIN mask Note: If the PIN mask feature is off, you dial normally. If you’ve specified Mode 1 — use “star” power 1 Enter the phone number, then press the * (“star”) key and enter the PIN .
Beyond the basics Setting security transmission Your fax’s security transmission feature provides extra assurance that your documents go where you’re sending them.
Beyond the basics • Mode 1 (the display calls it “Mode1”) — Your fax machine checks whether any phone number in your autodialer matches the last four digits of the remote fax’s subscriber ID (remember, that’s the phone number part of the TTI ).
Beyond the basics 2 Press or / PROGRAM until you see your preference, Mode2 or Mode3 . 3 Press ENTER , ENTER . The display shows: If this is the number you wish to clear, skip to step 5. Otherwise, proceed to step 4. 4 Press / PROGRAM repeatedly until you see the number you wish to clear.
Beyond the basics To clear another department code, repeat steps 2–3. To finish clearing department codes, press STOP to return to standby mode. Activating (or turning off) the department code setting 1 Press / PROGRAM , M , 3, ENTER .
Beyond the basics 4 Press or / PROGRAM once or twice until you see the setting you want. 5 Press ENTER to save the setting. Sending a fax using a department code Note: For this operation to work, two things must be true: • The four-digit department code must exist on your fax machine.
Just in case … Now, here’s how to care for your machine. Also, we’ll suggest procedures to try in case of trouble. Finally, the Glossary will explain fax terms you may encounter.
3.1 Clearing paper jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 Print quality problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4 Figuring out communications problems .
Just in case … We designed your fax machine to work reliably for years. However, you may occa- sionally experience one type or another of paper jam. Here’s what to do. If an original document jams 1 Open the scanner cover by hold- ing the scanner cover release.
3.3 Just in case … To clear a printout jammed at the paper cassette: 1 Pull forward on the paper cas- sette to open it. 2 Carefully remove the jammed paper(s) from the machine’s rollers, as shown. 3 Push the paper cassette back into its normal position within the machine.
Just in case … If your machine’s printouts (received faxes or copies) develop quality problems, check the following descriptions and, when you find the one which appears to be like yours, try the suggested solutions.
Printouts have irregularities • The paper you’re using may have absorbed moisture, per- haps due either to high humidity or water having been spilled on the paper supply at some point. Toner will not adhere well to paper at the locations where the paper has been wet.
Just in case … Occasionally during transmissions, your fax machine will detect a problem with the phone line or will encounter some other trouble in transmission or reception. When it does, it will alert you with an alarm. You can further identify the problem with LCD messages, printed check messages and error reports.
What you see on the LCD What it means/ What to do Enter No.(0-32) You tried to enter a call group number greater than 32 . Your machine can maintain 32 call groups, numbered 1–32 (call group 0 covers all the groups). Determine the correct call group and re-enter its identifier number.
What you see on the LCD What it means/ What to do Check Paper Size The multipurpose tray’s paper size setting (see page 1.8) doesn’t conform to the paper actually in the tray. Either change the setting or change the paper so that each is the same as the other.
Just in case … 3.9 Errors When sending faxes, your machine occasionally will run into communications errors. These can be caused by anything from lightning to telephone line interference. (These same factors cause the static, or line noise, you sometimes hear on phone calls.
Just in case … Transmission errors T .1.1 The remote fax machine didn’t respond to your machine. Call someone at the remote machine. T .1.4 Someone pressed STOP at the remote unit in the middle of the handshake (the very first part of the fax communication, when the two units “agree” on the settings they’ll share).
Just in case … With proper installation and a little maintenance, your fax machine should give you dependable service for years to come. Although it requires little day-to-day care, you can take the.
Just in case … Corrective cleaning Here are some simple cleaning procedures for keeping your fax machine operating smoothly. Use each as the need arises. Curing frequent jams in the document feeder If you’re having trouble with getting your original documents to feed properly, try this procedure: 1 Turn off your fax machine.
Just in case … General questions Q: Where do I add ink or toner to make my fax machine’s printouts darker? A: You can’t adjust the darkness of an incoming fax printout, but you can adjust the darkness of a copy (or copies) or of a transmission. Insert a document and press CONTRAST repeatedly to adjust the contrast setting.
Just in case … Q: How do I send a fax to an overseas telephone number? A: Dialing requirements for international calls may vary depending on your local telephone company’s requirements. For most international calls, call 011, then the appropriate country code, city code and phone number.
Just in case … Receiving faxes Q: My fax never answers. What’s wrong? A: Check to make sure your fax machine is properly connected to a working AC power outlet and phone jack (see pages 1.6–1.8). If you’re using a second phone with your machine, make sure it’s connected properly (page 1.
Just in case … The way fax machines work is regulated closely by international standards applied by the International Telecommunications Union ( ITU ), an agency of the United Nations. These standards ensure the compatibility of your fax machine with mil- lions of other fax machines worldwide.
Just in case … This glossary contains terms and words you may encounter when discussing or reading about fax machines and fax communications. Please use these definitions for reference only. Of course, all information is subject to change without notice.
Just in case … 3.18 Effective printing width — The widest image that can be printed on a fax. Effective scan width — The maximum width the scanner in a fax can scan during transmission.
Just in case … 3.19 Paper sizes — All are width × length: Letter-sized = 8.5 ″× 11.0 ″ Legal-sized = 8.5 ″× 14.0 ″ A5 = 5.8 ″× 8.3 ″ A4 = 8.3 ″× 11.7 ″ A3 = 11.7 ″× 16.5 ″ B5 = 7.2 ″× 10.1 ″ B4 = 10.1 ″× 17.0 ″ B3 = 14.
Superfine resolution — 203 H × 392 V lpi. Your Muratec fax machine’s superfine transmission mode is Group-3-compatible, not the more limited proprietary version. TCR — Transmit confirmation report; this provides proof that your Muratec fax did send the document you set for transmission.
Appendix and index.
Type: High-speed facsimile transmitter and receiver for home and office use. Phone line: Normal Public Switched Telephone Line ( PSTN ) or equivalent. F-150 modem: • 33,600, 31,200, 28,800, 26,400, 24,000, 21,600, 19,200, 16,800, 14,400, 12,000, 9,600, 7,200, 4,800 and 2,400 bps per ITU - T , V .
United States of America Federal Communications Commission ( FCC ) information Ringer Equivalence Number ( REN s ): AC REN , 2.4 B (F-150) or 3.2 B (F-120 or F-100); DC REN , 0.3. This facsimile machine has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules.
A Activity journal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.29 Alphanumeric directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I Inserting pages (for faxing or copying) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.14, 1.20 Installation AC power line connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S Security reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 .45–2.46 Security transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
T his warranty is made by Muratec America, Inc. (hereafter referred to as “Muratec”). This warranty is valid only on Muratec products purchased and used in the United States of America. This warranty applies to the product only while owned and used by the original purchaser (“Customer”).
Laser safety This fax machine contains a page printer which operates by means of a laser. There is no possibility of danger from the laser, provided the fax machine is operated according to the instructions provided in this manual.
デバイスMuratec F-100の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Muratec F-100をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMuratec F-100の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Muratec F-100の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Muratec F-100で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Muratec F-100を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMuratec F-100の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Muratec F-100に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMuratec F-100デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
