NECメーカーAT-35の使用説明書/サービス説明書
ページ先へ移動 of 20
Caller ID Handsfree Business Telephone AT-35 U SER G UIDE DISCLAIMER The material cont ained herein is subj ect to change without prior notice at the sole discretion of NEC Business Solutions Lt d.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS ................................................... 2 LOCATION OF CONTROLS ...................................................................... 3 INSTALLATION ..........................................
IMPOR T ANT SAFETY INSTRUCTIONS When using your telephone equi pment, basic saf ety precautions should always be followed to reduce the risk of fire, electric shock, and injury to pers ons, by doing the f ollowing: 1. Read and understand all instructions.
LOCATION OF CONTROLS 3.
LOCATION OF CONTROLS 1. Visual Ri ng Indicator/ Message W aiting Lamp Flashes to indicate an incoming call. May also indicate messages have been received on some PBX systems. 2. LCD Display 3. SET TIME / PBX DIAL Key Used to enter clock setting mode and for Dialling behind a PBX.
INSTALLATION Package Content s Handset T elephone Base This User ’ s Guide Handset Curly Cord T elephone Line Cord W all-Mount Screws and Anchors Three AA Batteries (For initial operation test) Inst alling the Batteries Install three high quality AA size Alkalin e (LR6) or Manganese (R6,UM-3) batteries.
INSTALLATION IMPORT ANT : • Disconnect telephone line c ord before removing battery cover to replace the batteries. Battery cover mu st be in place at all other times. • Replace all batteries every si x (6) months. • When the lo w battery indicator appears on the LCD, repl ace all batteries immediately .
INSTALLATION Connecting an Additional Device An additional analogue dev ice, such as an answering machine, facsimile machine or PC modem can be connected in parallel with this teleph one. Connect one end of the li ne cord to the DA T A socket on the rear of the telephone and the other end to the LI NE socket on the additional device.
INITIAL SETUP Selecting the Dialling Mode Set the dialling mode s w itch to either DP (Pulse) or MF (T one) to se lect the signalling type. The correct mode depends on the requirements of the PBX to which the telephone is connected. Setting the LCD Contrast There are 5 display contrast settings.
INITIAL SETUP Setting the Flash Time The correct hookflash timing depends on the requirements of the PBX to which the telephone is connec ted. 1. Ensure the phone is id le. 2. Dial ¿ 4 1 ¿ . 3. Dial 00 to 06 to select from the follo w ing list of hookflash timings.
BASIC OPERA TION Making a Call using the Handset 1. Pick up the handset and w ait for dial tone. 2. Dial the number y ou require. 3. Replace the ha ndset when you finish the call. Or , to preview the dialled n um ber: 1. Dial the number y ou require ( whil e on- hook).
BASIC OPERA TION Receiving a Call using the Handset 1. Pick up the handset w hen the phone rin gs. 2. Converse with your caller . 3. Replace the ha ndset when you finish the call. Ö Adjust the volume if needed using the H an ds et V olume Co n trol Switch.
FEA TURES FLASH Key The FLASH key works the sa me as the hook switch of the phone. When the FLASH key is pressed during a conv ersation, it may terminate the call or place the call on hold and you will hear dia l tone allowing yo u to dial the next phone number .
FEA TURES Memory Redial The last 30 telephone numb ers dialled (up to 21 digits each) are stored in the Outgoing Call Memory . T o dial from the Outgoing Call Memory: 1. Press the SEARCH key until the OU T icon is sho wn on the displ ay . 2. Advance up or down to the phone number you wish to dial by pressing t h e o r k e y s .
FEA TURES T emporarily Switching Pulse to T one Dialling If your telephone set is connected to a Pulse dialling mode net wo rk, this feature allows you to temporarily switch to T one dialling to access T one operated services; e.g. ans wering machines , telephone banking, etc.
FEA TURES One-T ouch Dialling This telephone set is equipp ed with 10 one-touch dial memory keys for programming your most frequentl y dialled telephone numbers.
FEA TURES Caller ID (CLI) This telephone set will display Caller ID (CLI) information received w ith incoming calls. The last 90 Caller ID numbers received are automatically stored in CLI memory (up to 21 digits each). The numbers stored in CLI memory may be reviewed , deleted, or dialled back i f desired.
TROUBLESHOOTING T roubleshooting Guide Problem Solution No dial tone / Will not dial out • Check that the hookswitch is not depressed. • Check that the line cord is connected. • Make sure the SPEAKER key LED is lit (if using speakerphone). • Ensure that the Dialling Mode Switch is set to the correct position.
SPECIFICA TIONS Caller ID receiver FSK (type I) or DTMF Caller ID information CLI number with date and time stamp Caller ID review , delete, dial back Y es Caller ID storage 90 (21 digits) Last number.
QUICK REFERENCE Feature Access Codes Operation: Dial Access Cod e + Option Code + # Feature Access Code Option Code Ring T one ¿ 1 ¿ 1: Low T one 2: Mid T one (default) 3: High T one Hold T one ¿ 5.
デバイスNEC AT-35の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
NEC AT-35をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはNEC AT-35の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。NEC AT-35の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。NEC AT-35で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
NEC AT-35を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はNEC AT-35の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、NEC AT-35に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちNEC AT-35デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
