NECメーカーLCD4610, LCD4610の使用説明書/サービス説明書
ページ先へ移動 of 38
MultiSync LCD4010 40" LCD Colour Monitor MultiSync LCD4610 46" LCD Colour Monitor User’ s Manual.
Inde x Declaration of conf ormity ...................................................................................................... ....................... English-1 Impor tant Inf or mation .......................................................
English-1 English DECLARA TION OF CONFORMITY This de vice complies with P ar t 15 of FCC Rules. Operation is subject to the f ollowing tw o conditions. (1) This device ma y not cause har mful interf erence, and (2) this de vice must accept any interf erence receiv ed, including interference that ma y cause undesired operation.
English-2 Dec laration Declaration of the Man ufacturer W e hereby certify that the colour monitor MultiSync LCD4010 (L404G6) / MultiSync LCD4610 (L464G7) is in compliance with Council Directive 73/23.
English-3 English FOR OPTIMUM PERFORMANCE, PLEASE NO TE THE FOLLOWING WHEN SETTING UP AND USING THE MUL TISYNC LCD4010 / MUL TISYNC LCD4610 LCD COLOUR MONIT OR: • DO NO T OPEN THE MONITOR . There are no user ser viceab le par ts inside and opening or removing cov ers ma y expose y ou to dangerous shoc k hazards or other risks.
English-4 Contents P ow er Cord User ’ s Manual Video Signal Cable (D-SUB to D-SUB Cable) Wireless Remote Control and AA Batteries Clamper x 3 Y our new MultiSync LCD4010 / MultiSync LCD4610 monitor.
English-5 English EXIT MUTE INPUT 8 1 2 3 4 5 6 7 EXIT MUTE INPUT 9 10 7 DO WN ( ) button Activates the OSM men u when the OSM menu is turned-off. Acts as b utton to move the highlighted area down to select the adjustment with OSM menu. 8 EXIT button Activates the OSM men u when the OSM menu is turned-off.
English-6 T erminal Panel 7 A UDIO IN 1, 2, 3 T o input audio signal from external equipment such as a computer , VCR or D VD player . 8 A UDIO OUT T o output the audio signal from the A UDIO IN 1, 2 and 3 jack. 9 VIDEO INPUT/OUTPUT CONNECT OR VIDEO IN connector (BNC and RCA): T o input a composite video signal.
English-7 English 1 PO WER button Switches the power on/off . * If P ower Indicator is not glowing, then no controls will work. 2 INPUT button Selects from input signal, [RGB1], [RGB2], [RGB3], [D VD/HD], [VIDEO] and [VIDEO<S>].
English-8 P oint the top of the remote control toward the LCD monitor ’ s remote sensor during button operation. Use the remote control within a distance of about 7 m/23 ft. from the front of the LCD monitor ’ s remote control sensor and at a horizontal and vertical angle of within 30 ° within a distance of about 3 m/10 ft.
English-9 English 1. Determine the installation location CA UTION: DO NOT A TTEMPT T O INST ALL THE LCD MONIT OR BY Y OURSELF . Installing your LCD displa y must be done by a qualified technician. Contact your dealer f or more inf ormation. CA UTION: MO VING OR INST ALLING THE LCD MONITOR MUST BE DONE BY TWO OR MORE PEOPLE.
English-10 10. Recommended Adjustment T o reduce the risk of “ image persistence ” , please adjust the f ollowing items based on the application being used. “ SCREEN SA VER ” (See page 24), “ SIDE BORDER COLOR ” (See page 24), “ D A TE & TIME ” (See page 28), “ SCHEDULE ” (See page 28).
English-11 English 4. T o av oid falling down F asten the LCD monitor to wall using a cord or chain, which is sufficient to suppor t the weight of the LCD monitor (appro x. LCD4010: 27,5kg / LCD4610: 35,7kg). Bef ore moving the LCD monitor , the cord or chain should be remov ed.
English-12 Mounting P osition of Ferrite Core Ferrite Core T o connector of PC T o AUDIO 1 of monitor Attaching the Ferrite Core Attach the Ferrite Core to PC A udio Cable. Use of the cable without mounting the f errite core will result in the occurrence of noise.
English-13 English Connecting a P ersonal Computer Connecting your computer to y our LCD monitor will enable y ou to display your computer ’ s screen image.
English-14 Connecting your Macintosh computer to y our LCD monitor will enab le you to displa y y our computer ’ s screen image. Some video cards or drivers ma y not display images correctly .
English-15 English LCD monitor Equipment with a digital interf ace such as a personal computer with RGB output (TMDS) D VI-D connector D VI-D connector T o D VI output T o audio output Connections can be made with equipment that is equipped with a digital interf ace compliant with the D VI (Digital Visual Interf ace) standard.
English-16 Connecting your D VD player to y our LCD monitor will enable you to displa y D VD video . Ref er to your D VD player user ’ s manual f or more information. Connect the LCD Monitor to a D VD Player • T o connect the D VD/HD IN connector (BNC) on the LCD monitor , use a separately av ailable BNC connector cab le.
English-17 English Y ou can connect your stereo amplifier to your LCD monitor . Refer to your amplifier o wner ’ s manual for more inf or mation. Connect the LCD Monitor to a Stereo Amplifier • T urn on the LCD monitor and the amplifier only after all connections have been made .
English-18 Basic Operation P ower ON and OFF Modes The LCD monitor power indicator will turn green while po wered on, or red when in off mode. The monitor can be powered on or off using the f ollowing three options: 1. Pressing the power button. Note: Before pressing the power button, be sure to turn on the Main P ower Switch on the LCD monitor .
English-19 English P ower Indicator Using P ower Management The LCD monitor f ollows the VESA approv ed DPM P ower Management function. The power management function is an energy sa ving function that automatically reduces the power consumption of the displa y when the ke yboard or the mouse has not been used for a fix ed period.
English-20 MAIN MENU PICTURE SCREEN AUDIO PIP CONFIGURA TION 1 CONFIGURA TION 2 ADV ANCED OPTION :SEL SET :NEXT :RETURN MENU :EXIT MENU PICTURE BRIGHTNESS CONTRAST SHARPNESS BLACK LEVEL COLOR CONTROL .
English-21 English Adjust the tint of the screen. Press + button to Skin colour becomes greenish. Press - button to Skin colour becomes purplish. Adjust the colour depth of the screen. Press + button to increase colour depth. Press - button to decrease colour depth.
English-22 Adjusts the vertical size by increasing or decreasing the setting. Press + button to e xpand the height of the image on the screen. Press - button to narro w the height of the image on the screen.
English-23 English Main-Menu PICTURE IN PICTURE Sub-Menu Selecting the size of picture inserted at the “ Picture-in-Picture ” (PIP) mode. “ Large ” , “ Middle ” and “ Small ” are av ailab le.
English-24 Select “ SCREEN SA VER ” functions to reduce the risk of the “ image persistence ” . GAMMA: The displa y gamma is changed and fixed when selected “ ON ” . COOLING F AN: The b uilt in cooling fan is alw ays on when set “ ON ” .
English-25 English T o compensate for image degr adation, which is caused by using a long cable . RED/GREEN/BLUE DELA Y T o adjust the each phase of RED , GREEN and BLUE signal. LEVEL: 0 - 6 RED/GREEN/BLUE SHARPNESS T o adjust the each performance degradation of RED , GREEN and BLUE signal.
English-26 Selects the method of input detection when more than two computers are connected. FIRST DETECT: When the current video input signal is not present, then the monitor searches for a video signal from the other video input por t.
English-27 English Selects the image flipping or rotation. NORMAL: Nor mal display . H MIRROR: Mirror image for horizontal direction. V MIRROR: Mirror image for v er tical direction. RO T A TE: Rotate the image 180 degrees. Changes the displa y area of the image.
English-28 Inf ormation of status for COOLING F AN, BRIGHTNESS and TEMPERA TURE. COOLING F AN comes to run when inside temperature is ov er a guaranteed limit. BRIGHTNESS comes to be decreased when inside temperature is ov er guaranteed limit with cooling fun.
English-29 English 3. Reducing the environmental temperature is eff ective f or long life use. When Protection board (glass, acryl) is installed over the LCD surf ace, enclosed into the box / w all, or stack the monitor , please utilize the temperature sensors inside monitor .
English-30 Contr olling the LCD monitor via RS-232C Remote Control This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal.
English-31 English 3) Control sequence (1) The command from a computer to the LCD monitor will be sent in 400ms. (2) The LCD monitor will send a return command 400ms* after it has received and encoded. If the command isn ’ t receiv ed correctly , the LCD monitor will not send the return command.
English-32 Features Reduced Footprint: Provides the ideal solution f or environments requiring super ior image quality but with siz e and weight limitations. The monitor ’ s small footprint and low weight allow it to be mo ved or tr anspor ted easily from one location to another .
English-33 English T r oubleshooting No picture • The signal cable should be completely connected to the displa y card/computer. • The display card should be completely seated in its slot. • F ront Po wer Switch and computer po wer switch should be in the ON position.
English-34 Specifications f or MultiSync LCD4010 Product Specifications Analog Input Digital Input LCD Module 40" / 101.6cm diagonal Pixel Pitch: 0.648mm Resolution: 1366 x 768 dots Colour : Over 16 million colours (depending on video card used) Brightness: 450cd/m 2 (T yp.
English-35 English Specifications f or MultiSync LCD4610 Product Specifications Analog Input Digital Input LCD Module 46" / 116.8cm diagonal Pix el Pitch: 0.7455mm Resolution: 1366 x 768 dots Colour : Over 16 million colours (depending on video card used) Brightness: 500cd/m 2 (T yp.
English-36 Pin Assignment 1) Analog RGB input (MiniDsub15p): R G B 2 Pin No Name 1 Video Signal Red 2 Video Signal Green 3 Video Signal Blue 4 GND 5 DDC-GND 6 Red-GND 7 Green-GND 8 Blue-GND 9 +5V (DDC.
デバイスNEC LCD4610, LCD4610の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
NEC LCD4610, LCD4610をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはNEC LCD4610, LCD4610の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。NEC LCD4610, LCD4610の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。NEC LCD4610, LCD4610で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
NEC LCD4610, LCD4610を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はNEC LCD4610, LCD4610の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、NEC LCD4610, LCD4610に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちNEC LCD4610, LCD4610デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。