NETGEARメーカーHR314の使用説明書/サービス説明書
ページ先へ移動 of 20
Installation Guide 54 Mbps Cable/DSL 802. 11a Wireless Router MODEL HR314 with 4-port 10/ 100 Mbps switch.
Introduction Thank you for purchasing a NET GEAR HR314 54 Mbps 802.11a W ireless Router . The HR314 gives you the ultimate in office mobility with the freedom to r oam throughout the workplace while connected to the Internet at speeds up to 54 Mbps.
What’s in the Bo x When you open the box, verify that you r eceived everything. The package includes: • HR314 54 Mbps 802.11a Wi reless Router • AC po wer adapter • E thernet patch cable • H.
Gather Configuration Information for Y our W orking Connection to the Internet Before installing the HR314 router , you should have an external DSL or cable modem with an Ethernet port set up and working with one computer . Y ou ’ll be installing the router between the modem and the computer .
Connection information Later in the setup process you ’ll need to configure the router to work with your networ k. A Setup Wizard is available to help y ou through this procedure. Y ou can configur e the router yourself using information that you can get from your computer or y our ISP about your current Internet connection.
Host and Domain Names Some ISP s use a specific host or domain name—like jsmith or earthlink.net. If you hav en ’ t been given specific information about host or domain names then use the following examples as a guide: • If your main e-mail account with y our ISP is aaa@yyy .
Install the R outer After unpacking the box and locating the configu- ration information, you ’ r e ready to install the router . 1. Determine a suitable location for your router . The operating distance or range of your wireless connection can vary significantly based on the physical placement of the wire- less router .
Check the setup • The T est light turns on for a few seconds and then goes off. Note: If the T est light remains on for more than one minute, go to T roubleshooting on page 13. • The P ower and Internet Link lights should be lit. • The W ireless Link light should be lit.
Configure the Computer to W ork with the R outer and R estart the Network N ext, make sure that the computer can interact with the router . T o do this, configure the TCP/IP settings on the computer and then r estart the network. Ho w you do this depends on your computer .
Macintosh Operating System Mac OS ® 8.6 or 9.x 1. Choose Control P anels >T CP/IP from the Apple menu. 2. If not already selected, select E thernet in the Connect via list. 3. Select U sing DHCP Server in the Configure list. 4. Click the close box.
Configure the R outer and T est the Connection N ow you configure the r outer to work with your DSL or cable connection. Y ou configure y our router using Internet bro wser software such as M icrosoft ® Internet Explor er 5.0 or Netscape N avigator ® 4.
Connect and Configure Other Computers (Optional) N ow that you have one computer set up to access the I nternet through the router , you can con- nect other computers so they can share the modem. Wired PCs 1. Connect a Category 5 Ethernet patch cable between another computer and one of the remaining numbered Local ports on the router .
Optional Configurations Internet Ser vices (Optional) T o have a W eb ser ver , e-mail ser ver , or other ser ver on your network accessible from the Internet, to use Internet communication featur es (such as N etMeeting), or to play I nternet enabled games, you ’ll have to allow access to your computers from the I nternet.
T roubleshooting No lights are lit on the router The router has no power . • Make sur e the power cor d is properly connected to the router . • Make sur e the power adapter is properly connected to a functioning po wer outlet. If it ’ s in a power strip , make sure the pow er strip is turned on.
I cannot get onto the Internet with a computer Y ou may not have restarted the computer or the network to have TCP/IP changes take effect. • Restart the computer . • Restart the N etwork as described on page 9. Y our computer may not recognize any DNS addresses.
R esetting TCP/IP Properties (Windows) If you ’ re on a Windows computer and ar e still having problems, you may try the following pro- cedure before contacting technical support. Windows 98/Me 1. Click the Start button and then click R un. 2. T ype winipcfg, and then click OK.
Glossar y of T erms Y ou ’ll find a mor e extensive glossary in the Reference Manual on the HR314 R esource CD. Category 5 (CA T5): A twisted pair cable that meets specified requirements for high-speed net- working. Domain Name System (DNS) server: A ser ver that matches Internet names (such as www .
R outer System R equirements T o use the router in y our network you must have: • Cable or DSL modem with E thernet interface • W orking Internet service • An ethernet network car d (NIC) for each wired connection • An 802.
V oluntary Control Council for Interference (VCCI) Statement This equipment is in the second category (information equipment to be used in residential areas) and conforms to the stan- dards set by the.
NET GEAR, INC. Support Information Phone: 1-888-NET GEAR E-mail: support@NETGEAR.com www .NETGEAR.com T echnical Support YOU MUST REGISTER TO OB T AIN TECHNICAL SUPPOR T .
デバイスNETGEAR HR314の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
NETGEAR HR314をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはNETGEAR HR314の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。NETGEAR HR314の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。NETGEAR HR314で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
NETGEAR HR314を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はNETGEAR HR314の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、NETGEAR HR314に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちNETGEAR HR314デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。