NetgearメーカーVueZoneの使用説明書/サービス説明書
ページ先へ移動 of 41
350 East Plumeria Drive San Jose, CA 95134 USA October 2012 202-1 1 173-02 v1.0 V ueZ one S y stem User M anua l.
2 V ueZone System Support Thank you for choosing NETGEAR. After installing your device, locate the serial number on the labe l of your product. Y ou will need to reference th is serial number if you contact support. For product upda tes and web support, visit http://support.
3 Contents Chapter 1 Getting Started VueZone Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Base Station .
4 V ueZone System Grid or List Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Chapter 5 Settings Tab Personal Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 1 1. Gettin g S t arted This chapter covers the following topics: • VueZon e Network • Set Up Y our Vu eZone System • Install the Cameras • S tart V iewing For more information about th e topics covered in this manual, visit the Support website at http://support.
Getting St arted 6 V ueZone System V ueZone Network The base st ation connect s to your network and uses the Internet conn ection to stream video to your private V ueZone account. Y ou can use your smartphone or a comp uter to visit your V ueZone account to access your video.
Getting St arted 7 V ueZone System P ackage Contents Y our V ueZone personal video network includes the following: Base S tation Cameras (2) Power adapter Ethernet cable camera mounts ( 4) W all-mount.
Getting St arted 8 V ueZone System Base Station The base st ation connect s to your network and wirelessly communicates with the V ueZone cameras. Camera Sync button Sync LED Power LED Internet LED Reset Ethernet USB Power connector Stat us L ED Figure 3.
Getting St arted 9 V ueZone System Set Up Y our V ueZone System Y our network must be connect to the In ternet before you install the V ueZone base station. Follow the step s in this section in the order in which they are presented. Connect the Base Station The base station n eeds to be connected to a network with an Internet connection.
Getting St arted 10 V ueZone System Install Camera Batteries Depending on the camera model, you need to install either one or two batteries. The camera batteries are provided in the p ackage. T o inst all camera batteries: 1 Slid e the battery latch toward the camera back, and p ress down on the bottom of the door to remove it.
Getting St arted 11 V ueZone System Sync Cameras to the Base Station Syncing the cameras establishes communicati on between the cameras and the base station. T o sync cameras to the base st ation: 1 On the base station , make sure that the Internet LED on front is flashing.
Getting St arted 12 V ueZone System Install the Cameras Use the magnetic mount s provided in the package to inst all your cameras. T o inst all a camera: 1 Decide where you want to inst all the camera. 2 If you want to stick the mount directly to a surface, peel off the protective layer on the back of the mounting ball.
13 2 2. Qui c k T our o f m y .V ueZ one .com This chapter covers the following topics: • VueZone T abs • Personalize Y our VueZone System.
Quick T our of my .VueZone.com 14 V ueZone System V ueZone T abs V ueZone.com has three t abs: Cameras, Library , and Settings. This is where you contr ol everything for your V ueZone personal video network. When you log in the Camera tab displays. Figure 6.
Quick T our of my .V ueZone.com 15 V ueZone System Settings • V iew your current account information. • Change your password. • Set up motion-activated alert s. • Adjust the sensitivity of your motion-activated camera. • Schedule recordings.
Quick T our of my .VueZone.com 16 V ueZone System T o rename a came ra from the Camera t ab: 1 Double-click the camera name. 2 T ype a new name. Camera names are limited to 13 cha racters, no sp aces. 3 Click out side the field. The new name is saved automatically .
17 3 3. Cam er as T ab This chapter covers the following topics: • Cameras T ab V iews • Record V ideo • T ake a Snap shot • Zoom • Adjust Brightness Level • Motion Detection Cameras.
Cameras T ab 18 V ueZone System Cameras T ab Views This is where you watch video from your cameras. There are two views you can use: • 320-g rid view , which shows all of your cameras at a sma ller size (320 x 240). • 640-view shows o ne camera at a large size (640 x 480).
Cameras T ab 19 V ueZone System 3 If you have more than one camera, yo u can play all of them at once by clicking the Play All button below the tabs. The button name changes to S top All. T o stop playing video from all the cameras, click Sto p A ll .
Cameras T ab 20 V ueZone System Control Bar Buttons There are six controls on the tool b ar: start/stop streaming, record video, take a snap shot, zoom, adjust brightness, and full screen /time lapse mode. Control bar Figure 8. Cameras t ab control bar The following t able describes the control bar buttons.
Cameras T ab 21 V ueZone System Re c o r d V i d e o Y ou can st art recording video, or you can schedule it (see Schedule a Recording on pag e 32 ). T o st art recording video: 1 Click the St art Streaming icon to beg in streaming live video. 2 T o start recording, click the Record icon.
Cameras T ab 22 V ueZone System Zoom Y ou can zoom in on the video you see fro m the cameras. T o zoom: 1 When streaming video, click the Zoom icon in the control bar . The zoom window opens with the option to zoom in b y 1x, 2x or 4x. 2 Select the zoom level.
Cameras T ab 23 V ueZone System Adjust Brightness Level The cameras use the normal image setting unless you change the setting to compensate for bright light or low light environments. Friend s cannot change the brightness level. • Bright light : Reduces exposure for bright light or outdoor settings.
24 4 4. Li b ra r y T a b Y ou can use the Library tab to man age and watch video clips and review snap shots. This chapter covers the following topics: • View Y our Recordings and Snapshot s • Do.
Library T ab 25 V ueZone System View Y our R ecordings and Snapshots On the Library tab you can sort snap shots and recording s by name, camera, date, or type by making a selection in the V iew By section above the recordings. T o view your recording or snap shot: Click the recording or snap shot.
Library T ab 26 V ueZone System Lock or Unlock a R e cording or Snapshot Y our account has a storage limit which varies dependin g on your subscription level. When you reach your limit, your oldest files are de leted automatically . Locked files are not deleted.
Library T ab 27 V ueZone System 4 Enter the email addresses and a message to your recipients. T o send to more than one email address, use a semi-colon between the addresses. 5 Click Send . T o cancel, click the X in t he upper right corner . When your friends receive the email, they can cl ick a link to a p age to see what you sent them.
Library T ab 28 V ueZone System Y ou are asked to confirm that you want to delete the selected items. 3 Click Delete t o complete the action. Tip: Y ou can store up to 500 MB of files depending on the V ueZone service plan that you have. T o ensure that you have sufficient space , periodically save files to your computer .
29 5 5. Settin g s T ab This chapter covers the following topics: • Personal Settings • Cameras • Recording Format • Schedule a Recording • Sharing • Base S tations • Sof tware Updates.
Settings T ab 30 V ueZone System P ersonal Settings This is where you can view your current acco unt informa tion, change your user name (used to log in to your account), p assword, and your cont act information including email address and physical address.
Settings T ab 31 V ueZone System 2 In the left p ane, click a camera name. 3 T ype the new camera name in the field. The name is saved automatically . When you c lick ano ther tab or link, the name chan ge is shown.
Settings T ab 32 V ueZone System Motion Detection T o adjust your motion detection settings, yo u must first enable motion det ection using the radio buttons. T o adjust your motion detection setting s: 1 Click the Motion Detection link. 2 Using th e slider , select the sensitivity .
Settings T ab 33 V ueZone System 4 Select how often you would like this recording to repeat. 5 Select the rate that you want the video captured. • S treaming video captures the entire time of scheduled recording. • T ime lapse captures frames every 1 minute.
Settings T ab 34 V ueZone System Sharing Sharing is where you manage who can see yo ur cameras, and which cameras they have permission to view . This is free and easy for y our friends. All they have to do is register . T o add a friend: 1 On the Settings t ab, click Add a Friend .
Settings T ab 35 V ueZone System T o remove a friend completely: 1 Click the friend’s na me, to highlight it. 2 Click Remo ve . Y our friend is deleted. Base Stations On the Settings t ab, you can view information about your base stations and their connections.
Settings T ab 36 V ueZone System If you choose to cancel the update , you can update when you are ready by clicking Base Stat io n on the Settings tab. T o up date the sof tware: 1 Make sure that your base station is on and your camera’s batter y life indicator shows two yellow or green bars.
37 A A. No tif i cati on of C om pli ance NET GEAR Wir eless R outer s, Gate w a y s, AP s This device complies with Industry C anada li cence-exempt RSS standard(s).
V ueZone System Notification of Compliance 38 Deutsch [German] Hiermit erklärt NETGEAR In c. , dass sich das Gerät Radiolan in Übereinstimmung mit den grundlegenden Anforderungen und den übrig en einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
V ueZone System Notification of Compliance 39 This device is a 2.4 GHz wideband transmission system (tra nsceiver), intende d for use in all EU member states and EFT A countries, except in France and Italy where restrictive use applies.
V ueZone System Notification of Compliance 40 • Increase the separation between the equipment and the receiver . • Connect the equipment into an electrical outlet on a circui t different from that whic h the radio receiver is connected. • Consult the dealer or an experienced radio/TV technici an for help.
V ueZone System Notification of Compliance 41 Baby Monitor - Digital 40 feet / 12 meters Cordless phone - Analog 20 feet / 6 meters Cordless phone - Digital 30 feet / 9 meters Bluetooth devices 20 fee.
デバイスNetgear VueZoneの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Netgear VueZoneをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはNetgear VueZoneの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Netgear VueZoneの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Netgear VueZoneで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Netgear VueZoneを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はNetgear VueZoneの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Netgear VueZoneに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちNetgear VueZoneデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
