Network Computing DevicesメーカーNoneの使用説明書/サービス説明書
ページ先へ移動 of 28
Wireless USB Adapter Version: 2.02 --- - September 2001.
Copyright Statement No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, rec ording or otherwise without the prior writing of the publisher.
Radio Channel Selection Table Regulatory domains Channel_ID U.S .A. Canada Most of Europe Spain France Japan 1 × × × - - × 2 × × × - - × 3 × × × - - × 4 × × × - - × 5 × × × - - × 6.
Table of Contents Chapter 1 Introduction 1 1 - 1 Package Content s 2 1 - 2 Advantages for Using Wireless Network 2 Chapter 2 QUICK START TO WI RELESSS NETWORKIN G 3 Chapter 3 STEP BY STEP INSTALLATION.
1 Chapter 1 Introduction USB (Universal Serial Bus) provides a high - speed link for external devices to connect to a PC, and it has better Plug - and - Play sup port. Therefore, network adapters based on USB are easier to use than traditional PCI or PCMCIA adapters.
2 1.1 Package Contents The Wireless USB Adapter kit includes the following items: a. Wireless USB Adapter b. USB Cable c. The CD including: 1. Wireless USB Adapter Utility & Driver software 2. Use r’s Manual (this document) d. Quick Installation Guide 1.
3 Ch apter 2 Quick Start to Wireless Networking 1. Plug the connector of the USB cable, which has been connected to the USB adapter, into any free USB port on your PC. 2. Windows will automatically detect the USB Adapter as a new device and display t he Add New Hardware Wizard dialog box.
4 10. Click IE Explorer to surf the Internet..
5 Chatper 3 Step by step Installation Guide This section will lead you through the installation of Wireless USB Adapter and Wireless USB Adapter software in through details. You may wish to skip to quick installation guide to wireless netwo rking. To establish your wireless network connection, the following steps should be executed.
6 from Wind ows 98 or Me. A message will be prompted as follows, click “Yes” to complete the USB adapter setup. 3. The following dialog box asks how would you like to install the driver. Select the Search for the best driver… option and click Next .
7 5. The Add New Hardware Wi zard finds the correct driver, click Next to proceed. 6. After the Add New Hardware Wizard has completed the installation process, click Finish . The System Settings Change dialog box will appear asking to restart the system.
8 3. 2 Install Wireless USB Adapter Utility 1. Once your system has restarted, select Run from the Start menu. 2. Type “E: Wireless USB Adapter Utility Setup.exe” in the Open box (where E: is your CD - ROM drive) and click OK . 3. Read the Welcome scree n and click Next .
9 5. The Select Program Folder dialog box all ows you to accept the default application program folder name or to assign a name of your preference. 6. Once the installation is complete, a dialog box will appear asking if you want to restart the system.
10 4. Click on “Specify an IP Address” and make sure having the same netid and subnetid of all th e connected computers. 3.3.1 Setting l Operating Mode: If you want to connect with Access Point, please set the mode as” Infrastructure”.
11 There are three processes once you want to change the parameter in the “Setting”: 1. Click the “Change” button first if you want to change any of the parameter. 2. Choose the parameter you wish to change. 3. After cha nging the parameter, please click on the “Submit” button to finish.
12 3.3.3 Site Survey The screen shows all the messages of Access Point around your Wireless USB Adapter device. The messages of Access Point include BSSID, SSID, Signal, the Channel used by AP, and enabled the Encr yption AP or not. You can click the Rescan button to find the new AP.
13 3.3.4 Encryption You may desire an additional measure of security in your wireless network, which can b e achieved by using the Encryption function. WEP Key to use: You can choose one of the four Keys you typed (Key1~Key4) as the WEP Key. WEP Mode: If you set the Mode to Optional, your device can communicate with the stations with disabled WEP.
14 3.3.5 Advanced The screen shows the advanced setting of the Wireless LAN Monitor Utility, and it includes Preamble Type, Fragmentation Threshold, and RTS / CTS Threshold. We suggest to use the default settings: Preamble Type: Long. Click on Submit but ton to save all the settings.
15 3.3.6 Version The screen shows the version of Driver, Firmware, and Application for Wireless USB Adapter Utility / Driver. 3.4 Remove your Wireless USB Adapter If you do not need the wireless conne.
16 3.5 Uninstall the Wireless USB Adapter Utility / Driver If you do not need the wireless connectivity of your Wireless USB Adapter, 1. First you should remove the Wireless USB Adapter.
17 3. You will be asked if you want to uninstall the Wireless USB Adapter Utility and all of its components. Click “ Yes “ to u ninstall or click “ No “ to exit.
18 Chapter 4 Application To enable the sharing of the Internet access, you should set your Wireless USB Adapter mode as “ Infrastructure “ and con nect to the access point. When the procedure is completed, an Access Point will appear on the Wireless LAN Neighborhood of Wireless USB Adapter Utility.
19 If “ Read - Only “ is selected, the other users in the wireless network can only copy files from your folder. Copying files into your folder is not allowed. If “ Full “ is selected, t he other users in the wireless network have full access into your folder.
20 4.2 Printer Sharing in Windows 98 In order to the printer can be shared across the netw ork, it has to be set as the network printer. Follow the instructions below to set a printer as a network printer: 1. Click the “ Start “ button, point to the “ Settings “, and then click “ Printers “.
21 4.3 Using the shared folder 1. Double - click the “ Network Neighborhood “ icon, and then double - cli ck the computer where the shared folder is located. 2. Double - click the folder you want to connect to. 3. You may want to assign a drive letter for shared folder that you connect to.
22 Chapter 5 Troubleshooting If you encounter some problems installin g the Wireless USB Adapter or you want to confirm whether your card is installed properly or not, refer to the procedure below after you have installed the card.
23 5.2 Microsoft Networking Checklist In o rder to the Wireless USB Adapter can run properly, some network items must be presented in the Microsoft “ Network Neighborhood “ setup. To check and activate the network setup, right - click the “Network Neighborhood“ and select “Properties”.
24 Network Service for Microsoft Networking: Click “ Add “ and select “ Service “. Select “ Microsoft “ as the manufacturer and choose “ File and printer sharing for Microsoft Networks “ for network service; Click “ OK “ to set the network service.
デバイスNetwork Computing Devices Noneの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Network Computing Devices Noneをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはNetwork Computing Devices Noneの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Network Computing Devices Noneの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Network Computing Devices Noneで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Network Computing Devices Noneを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はNetwork Computing Devices Noneの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Network Computing Devices Noneに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちNetwork Computing Devices Noneデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。