NikonメーカーCameraの使用説明書/サービス説明書
ページ先へ移動 of 76
Pr ofessional Setting Guide.
ii T able of Con tents T ak ing Photographs T ak ing Photographs 1 1 Improving Camera Response ........................................... 2 Settings by Subject ............................................................. 6 Matching Settings to Y our Goal.
iii Autof ocus Tips ................................................................... 35 F ocusing with the AF-ON Button ........................................ 35 Choosing the Number of F ocus Points ............................. 35 AF-C Priority Selection .
iv T able of Contents First- Time Users 6 First- Time Users 6 7 7 Customizing the Command Dials ....................................... 68 Reversing Indicators ................................................................ 68 Choosing the Primary Slot .
1 T aking Photographs This chapter describes how the camera can be con gured for improv ed shutter response and settings adjusted for dif- ferent subjects, and giv es tips on using autofocus.
2 Improving Camera Response This section introduces settings for r eliably and quickly photographing athletes and other moving subjects. Continuous-Servo AF (AF-C) Continuous-Servo AF (AF-C ) Press the AF-mode but- ton and rotate the main command dial to select AF-C .
3 A A Custom Settings Custom Settings a1 AF-C priority selec tion > Release : The camera gives priority to shutter r elease over f o- cus, ensuring that you nev er miss a shot (page 36). a10 Store points by orienta tion > Y es : S elect separate focus points in landscape and portrait orientations for quick framing (page 41).
4 f3 Assign Fn button/f4 Assign preview button > Press > MY MENU : Add C ustom settings bank to My Menu and then use the Fn or Pv button to quickly select a bank ac- cording to the scene . T o add items t o My Menu: Select Add items . In My Menu, highlight Add items and press 2 .
5 Improving Camer a Response f16 Assign movie record button > Press + command dial > ISO sensitivity : When taking photos, use your right hand on the movie rec ord button and main command dial to set ISO sensitivity without taking your eye from the view nder .
6 In addition to the changes described above under “I m- proving Camera Response ” , you can ne-tune settings to improve r esponse for speci c subjects. Situation Situation AF-C priority selection (page 36) AF-area mode (page 38) Focus tracking with lock-on (page 44) See also Most team sports (e.
7 Situation AF-C priority AF-C priority selection selection (page (page 36 36 ) ) AF-area AF-area mode mode (page (page 38 38 ) ) Focus tracking Focus tracking with lock-on with lock-on (page (page 44.
8 Situation Situation AF-C priority selection (page 36) AF-area mode (page 38) Focus tracking with lock-on (page 44) See also Outer focus points ar e used (e.g ., speed skating) . In- crease number of dynamic-area f ocus points by one level when framing pictures in “tall” (portrait) orientation.
9 Settings by Subject Situation AF-C priority AF-C priority selection selection (page (page 36 36 ) ) AF-area AF-area mode mode (page (page 38 38 ) ) Focus tracking Focus tracking with lock-on with lo.
10 T aking Photographs Situation Situation AF-C priority selection (page 36) AF-area mode (page 38) Focus tracking with lock-on (page 44) See also Time between f ocus and shooting is short and there are obstacles between autofocus tar get and camer a (e.
11 Settings by Subject Situation AF-C priority AF-C priority selection selection (page (page 36 36 ) ) AF-area AF-area mode mode (page (page 38 38 ) ) Focus tracking Focus tracking with lock-on with l.
12 Matching Settings to Y our Goal Reducing Camera Blur: Vibration Reduction Vibration reduction ( VR) is suppor ted with VR lenses. T o re - duce camera blur , choose a setting suited to the subjec t.
13 Preserving Natural C ontrast: A ctive D-Lighting Active D-Lighting helps pre- serve details in highlights and shadows. Use Active D-Lighting for natural con- trast when photographing day matches in stadiums and other venues that mix sunlight and shade.
14 Quick Setting Selection: Shooting Menu Banks Use the Shooting menu bank option in the shooting menu when you need to switch rapidly fr om one group of settings to another , for example when alternating be - tween sunlight and shade. Shooting Menu Banks Shooting Menu Banks Shooting menu settings are stored in f our banks (A, B , C, and D).
15 Matching Settings to Y our Goal Finding C ontrols in the Dark: Button Backlights If you are having trouble nding camera controls in the dark, rotate the power switch toward D t o activate the control panel and but- ton backlights. The back- lights remain on for 6 s after the switch is r eleased.
16 Reducing Noise and Blur: Auto ISO Sensitivity Con trol When On is selected for ISO sensitivity settings > Auto ISO sensitivity control in the shooting menu, the camera au- tomatically adjusts ISO sensitivity if op- timal exposure can not be achieved at the value selected by the user .
17 Matching Settings to Y our Goal Reducing Shutter Noise: Quiet and Silent Release T o reduce the amount of noise made by the shutter during view nder photography , rotat e the release mode dial to J .
18 Optimizing White Balance If auto white balance does not produce the desir ed results, you can try another setting, choose a color temperature , or use preset manual white balance as described below .
19 Matching Settings to Y our Goal Choosing a Color T emperature Choosing a Color T emperature T o choose a color temperature for the amber (A )–blue (B) axis, select a white balance setting of K ( Choose color temp .
20 Preset Manual White Balanc e Preset Manual White Balanc e T o choose a white balance preset, select a white balance setting of L (page 18) and then press the U button and rotate the sub-command dial until the desired preset (d-1 to d-4) is displayed in the r ear control panel.
21 Matching Settings to Y our Goal Select direct measurement mode. Press the U butt on brie y and then press the button until the L icon in the rear contr ol panel starts to ash. A ashing D will also ap - pear in the top control panel and view nder .
22 V arying W hite Balance: W hite Balance Brack eting Use bracketing if you hav e trouble adjusting white bal- ance. Ever y time you take a photo , the camera will create multiple copies, each with a di erent white balance. Select white balance bracketing.
23 Matching Settings to Y our Goal Select a bracketing increment. Pressing the D butt on, rotate the sub-command dial to choose an increment of 1 (5 mir ed), 2 (10 mired), or 3 (15 mired). Bracketing incr ement D button Sub- command dial T op control panel Prog rams with increments of 1 are shown belo w .
24 Fr ame a photograph, focus , and shoot. Each shot is processed to cr eate the selected number of copies; with each copy , white balanc e is incre- mented by the selected amount, starting from the value selected for white balance ne -tuning.
25 Matching Settings to Y our Goal Cancelling Brack eting Cancelling Brack eting T o cancel bracketing, press the D button and rotat e the main command dial until the number of copies is 0 ( r ) and W is no longer displayed. The program last in ef- fect will be restored the next time bracketing is activated.
26 Copying White Balance from a Photograph F ollow the steps below to c opy a value for white balanc e from an existing photograph to a selected preset. Select preset manual white balance. Press G and select White balance in the shooting menu. Highlight Preset manual and pr ess 2 .
27 Matching Settings to Y our Goal Highlight a source image. Highlight the source image. T o view the highlighted image full frame, press and hold the X button. T o view images in other locations, press W and selec t the desired card and folder . Copy white balanc e.
28 Creating a Multiple Exposure Record from 2 t o 10 exposures in a single photo . Select Multiple exposure . Select Multiple exposure in the shooting menu. Select a mode. Highlight Multiple exposure mode and press 2 , then highlight one of the following and press J t o select the highlighted option and return to the multiple exposure menu.
29 Matching Settings to Y our Goal Adjust gain. Select Auto gain and choose from the following options . On : Gain is adjusted according t o number of exposures actually re- corded (gain for each exposur e is set to ½ for 2 exposures , ⁄ for 3 exposures, etc .
30 Interrupting Multiple Exposures Interrupting Multiple Exposures T o interrupt a multiple exposure before the speci ed num- ber of exposures have been taken, select O for multiple exposure mode.
31 Matching Settings to Y our Goal Copying P ictures Between Memory Cards When two memory cards are inserted, you can use the options in the playback Cop y image(s) menu to copy pic- tures between the.
32 Keeping the Camer a Lev el: V irtual Horizon Roll and pitch data from the camera tilt sensor can be dis- played f or assistance in levelling the camera on a tripod and in other similar situations. The Monitor The Monitor The Virtual horizon option in the setup menu is used to display a virtual horizon in the monitor .
33 Matching Settings to Y our Goal The View nder The View nder When Vi e w nder virtual horizon is selected for Cust om Setting f3 ( Assign Fn button ) or f4 ( Assign preview but- ton ) > Press , pressing the button displa ys pitch and roll indicators in the view nder.
34 Composing Photogr aphs: The F raming Grid F or help composing photo- graphs, select On for C ustom Setting d6 ( Vie w nder grid display ) to display a framing grid in the view nder. Fr aming grid Resizing Photographs for Upload: Resize Use the Resize option in the retouch menu t o create small copies of selected photographs.
35 Autofocus Tips Focusing with the AF-ON Button If AF-ON only is selec ted for Cust om Set- ting a4 ( AF activation ), the B button can be used to focus and the shutter-r e- lease button to release the shutter . T o lock focus or suspend autof ocus when an obstacle comes between you and the subject, release the B button.
36 AF-C Priority Selection Custom Setting a1 ( AF-C priority selection ) controls whether the camera gives priority to focus or shutt er re- lease. G Release : Pictures can be taken whether or not the camera is in fo- cus. Frame rates do not slow during burst photography .
37 Autofocus Tips : Subject not in focus : Subject in focus : Shutter released.
38 AF-Area Mode AF-area modes are described below . AF-area mode AF-area mode T op control T op control panel panel View nder View nder Sample focus- Sample focus- point display point display De.
39 Autofocus Tips AF-area mode T op control panel View nder Sample focus- point display Description Description The focus point is selected manually . The camera focuses on the subject in the selected focus point only . Choose for subjects you can keep framed in the selected focus point.
40 Focus P oint Selection and Aper ture The focus points available vary with the maximum aper ture of the lens. Maximum aperture f/5.6 or faster : Focus point selection is suppor ted with all 51 points: 15 cross sensors ( ) at the center of the display and 18 line sensors ( ) on either side.
41 Autofocus Tips Focus P oint Selection and Camera Orienta tion When Ye s is selec ted for C ustom Setting a10 ( Store points by orientation ), separate f ocus points can be selected for “wide” (landscape) orientation and for “tall ” (portrait) ori- entation (camera rotated 90° clockwise or counterclock - wise).
42 Adjusting Autof ocus to the Lens: AF F ine-T une If you nd that cer tain lenses do not produce the desired results with autofocus , you can adjust f ocus for each lens using the AF ne -tune > Saved value or Default options in the setup menu (note that AF tuning may interfere with normal focus; use only when requir ed).
43 Autofocus Tips Checking Focus Checking Focus Position a ruler at an angle so that one of the rules is at the same distance from the camera as a vertical surface such as the cover of a book stood upright. U sing autofocus , focus on the vertical sur face and then photograph the selected rule using focus lock.
44 Focus Tr acking with Lock-On By preventing the camera from r efocusing when y our sub- ject is brie y obscur ed by another object, focus tracking with lock-on ensures that the camera will continue to track the main subject once the obstacle has moved away (c on- tinuous-servo AF only).
45 Movies This chapter cov ers basic camera set- tings and tips and tricks you can use when shooting movies, in the order y ou will use them during lming.
46 Before Filming Before lming, ready the camera as described below . Sound The D4 supports the following sound recording f eatures . External Microphones External Microphones The optional ME-1 stereo micr ophone can be used to re- cord sound in ster eo or to avoid r ecording lens noise dur- ing autofocus.
47 Movie Settings In addition to microphone sensitivity , the following op- tions can be adjusted using Movie settings . Frame Size , Fr ame Rate , and Movie Quality Frame Size , Fr ame Rate, and Mo vie Quality Fr ame size, frame rate , and movie quality can be chosen using Fr ame size/frame ra te and Movie quality .
48 Image Area Using an FX lens with movie live view gives you a choice of two crops in addition to the standard FX -based f ormat: 1. T o record movies with a cr op factor 2.7× that of an FX format lens used with a non-D X image area, select a “1920 × 1080 crop ” option for Movie options > F rame size/frame ra te in the shooting menu.
49 Before Filming Destination Destination Choose the slot to which movies are recorded . The menu shows the time available on each card; r ecording ends automatically when no time remains. Live view can be used to rec ord movies up to 29 minutes 59 seconds in length.
50 Movies Starting Movie Live V iew Select movie live view . Rotate the live view selector to 1 . Live view selector Start live view . Press the a butt on.
51 Before Filming Exposure Mode Before r ecording , press the I ( Q ) button and rotate the main command dial to choose an exposure mode . The settings that can be adjusted in movie live view ar e deter- mined by the exposure mode as shown belo w . Aperture Aperture Shutter speed Shutter speed ISO sensitivity ISO sensitivity Exposure comp.
52 Using Autof ocus T o focus using autofocus, rotate the focus-mode se- lector to AF and select auto- focus and AF-area modes as described below . Focus -mode selector Choosing a Focus Mode Choosing a Focus Mode Press the AF-mode butt on and rotate the main command dial until the desired mode is displayed in the monit or .
53 Before Filming Choosing an AF-Area Mode Choosing an AF-Area Mode Press the AF-mode butt on and rotate the sub-command dial until the desired mode is displayed in the monit or . AF-mode button Sub- command dial Monitor ! ! Face-priority AF : Camera focuses on faces .
54 Lens V ibration Reduction (VR) W e recommend using VR lenses with the vibration reduction ON/OFF switch in the ON position. If the lens has a vibration reduction mode switch, choose NORMAL for hand-held photograph y or when using a mono- pod.
55 Before Filming Adjusting Settings During Live View Y ou can highlight the microphone sensitivity, headphone volume, or monitor brightness indicat or in the live view display by holding W and pressing 4 or 2 , and then ad- just the highlighted setting by pressing 1 or 3 .
56 The Informa tion Display Press the R butt on to choose the information display ed during movie live view . Information on Information o Framing guides Virtual horizon Histogram Hide indicators when the camera is connected to an exter- nal recording devic e (page 64).
57 Before Filming Checking Focus If Zoom on/o is selected for Custom Setting f1 ( Multi selector center but- ton ) > Live view , you can press the center of the multi selector to zoom in on the current focus point.
58 Starting and Ending Recording Press the mo vie-record button to start recording . If Record movies is selected for Cust om Setting g4 ( Assign shutter button ), you can start and end movie recording b y pressing the shutter-re- lease button all the way down.
59 Filming Movies Editing Movies The Edit movie option in the retouch menu can be used to create edited c op- ies of the movies on the memory card. Select Choose star t/end point to trim unwanted f ootage in amounts as small as 0.5 s, or Save selected frames to sav e selected frames as JPEG stills.
60 Time-Lapse Movies F ollow the steps below to cr eate silent time-lapse movies from photos taken automatically at selected intervals. The resulting movie is rec orded at the settings currently select- ed for Movie settings in the shooting menu .
61 Time-Lapse Movies Choose the shooting time. Enter a shooting time of from 1 minute to 7 hours 59 minut es (the selected setting is shown in the bottom section of the dialog) and press 2 to proc eed. Start shooting. Highlight On and pr ess J (to return to the shooting menu without start- ing time-lapse photography , select O ).
62 Interrupting Time-Lapse Photography Interrupting Time-Lapse Photography Time-lapse photography will end automatically if the bat- tery is exhausted.
63 Time-Lapse Movies Time Lapse Photography Time-lapse photography is not available in live view , at a shutter speed of A or when bracketing, High Dynamic Range (HDR), multiple exposure, or interval timer photog- raphy is active.
64 HDMI Output The camera can be connected to HDMI recor ding devices. Connect to HDMI device The HDMI option in the setup menu controls HDMI out- put. Output Resolution Output Resolution Auto is recommended. O ther settings should be used only if Auto does not produce the desired r esults.
65 HDMI Recording The D4 does not compress HDMI output, with the result that the camera can be connected to an HDMI recording device and movie footage recor ded at a higher quality than if it were sav ed to a memory card.
66.
67 First- Time Users.
68 Customizing the C ommand Dials Custom Setting f10: Customize Command Dials Custom Setting f10: Customize Command Dials Reverse rota tion : Reverse the direction of rotation for the main and sub-com.
69 First- Time Users Choosing the Primary Slot When using two memory cards, you can choose one as the primary card using the Primary slot selec tion item in the shooting menu. Adjusting Monitor Brightness The Monitor brightness option in the setup menu can be used to adjust monitor brightness for pla yback, menus, and the information display .
70 Metering T o choose how the camera sets exposure, press the Y but- ton and rotate the main command dial until the desir ed metering option is displayed in the view nder and top control panel. Choose from matrix ( L ), center-weighted ( M ), and spot ( N ) metering.
71.
© 2012 Nikon Corporation Printed in Japan CS SB#### (11).
デバイスNikon Cameraの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Nikon Cameraをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはNikon Cameraの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Nikon Cameraの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Nikon Cameraで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Nikon Cameraを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はNikon Cameraの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Nikon Cameraに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちNikon Cameraデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。