AstarメーカーLTV-2701の使用説明書/サービス説明書
ページ先へ移動 of 28
INSTRUCTION MANUAL INSTRUCTION MANUAL 27 ” TFT LCD TV 27 ” TFT LCD TV MODEL: L TV -2701.
CONTENTS IMPORT ANT SAFETY INSTRUCTIONS.................................................................................................................... PREF ACE.......................................................................................
1.Read these safety instructions. 2.Keep these safety instructions. 3.Heed all warnings. 4.Follow all safety instructions. 5.Do not use this apparatus near water . 6.Clean only with dry cloth. 7.Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
TO REDUC E THE RISK OF ELECT RIC SHOC K,DO NOT REMOVE COVER (O R BACK).N O USE-SE RVICE ABLE PARTS INSIDE . REFER SERV ICING TO QUAL IFIED SERVICE PERSO NNEL. RISK OF E LECTRIC SH OCK DO NOT OPEN! CAUTION CAUTION The symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
INSTAL LATION CAUTION Thank you very much for purchasing this TV. To enjoy your set to the full from the very beginning, read this manual carefully and keep it handy for ready reference. Never tamper with any components inside the TV, or any other adjustment controls not mentioned in this manual.
Caution Carry the set requires two or more people. Caution Do not place objects on this unit, it may damage the screen surface. WARNIN GS AN D CAUTIONS Caution Do not squash power supply cord under the television receiver. Caution Do not throw anything at the set.
WARNIN GS AN D CAUTIONS Caution Never stand on, lean on, or suddenly push the television or its stand. Y ou should pay special attention to children. Serious injury may result if it should fall. Caution Do not place your television on an unstable cart , stand , shelf or table.
WARNI NGS AND CAUTIONS Warning High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set.Refer servicing to qualified service personnel. Warning T o prevent fire or electrical shock hazard, Do not expose the television receiver to rain or moisture.
-7- Accessories: One Remote Control Two s ize AA A bat teries One AC cord SPECIFICA TONS Design and specifications are subject to change without notice.
-8- Step1: Disassemble the pedestal. Step2: Install part A on the wall. Step3: Hang the TV on the wall. Note: 1.Installation of the display unit on the wall should be carried out by qualified servicemen. Improper Installation may render the unit unsafe in the event of an earthquake.
-9- INST ALLA TION KEYS: 1.CH+: channel up select, it is equivalent . 2.CH-: channel down select, it is equivalent . 3.VOL+: volume up adjust, it is equivalent . 4.VOL-: volume down adjust, it is equivalent . 5.MENU: to enter into menu operation. 6.AUTO/EXIT : automatically adjust picture/exit OSD.
-10- INST ALLA TION BACK SCALE 1.000 Power switch Power switch C US LISTED Audio/Video Apparatus E 221338 58WJ L/MONO R AV2 HDTV AUDIO R Cb Cr Y Pr Pb L Y VGA DVI AUDIO L/MONO R L R VIDEO PC AUDIO IN .
STEPS: -1 1- INST ALLA TION * Please don't open the Cover 1. Connect Video Cable a. Make sure both the TV and computer are powered-OFF . b. Connect the video cable to the computer. 2. Connect the Audio cable. 3. Connect power cord 4. Power-ON Computer Power-ON the TV first, then Power-ON the computer .
ANTENNA -12- INST ALLA TION.
-13- This TV provides 2 group of A V input terminal including one S-Video and one group of YCbCr terminal for connection to VCR,DVD or other video equipment. T o enjoy the high quality picture. Please refer to the owner s manual of the equipment to be connected as well.
-14- 1. Remove the battery cover. 2. Insert the 2 AAA 1.5V batteries,ensurecorrect polarity (+ or -) 3. Replace the battery cover. Replace with new batteries when the TV set begins to show the following symptoms: Operation is unsteady, erratic or when TV set shows no response to the remote control.
-15- REMOTE CONTROL DESCRIPTION 3.VOL+/- BUTTONS (VOL+/-)(TV top control key) Press VOL+/- buttons to adjust sound level. 1.POWER (STAND BY) BUTTON ( ) Press this button to turn on or turn off (Standby mode).Press Power Button, picture and sound will appear on within a few seconds.
-16- REMOTE CONTROL DESCRIPTION 9.SOURCE SELECT BUTTON ( ) Press this button to display external video signal such as VCR or DVD player. (TV top control key) 7.DISPLAY BUTTON Press this button to recall program number, system etc on the screen. 10.MUTE BUTTON ( ) Press once to mute the sound, press again to return to previous sound level.
-17- REMOTE CONTROL DESCRIPTION Signal Current time TV channel and so undformat TV 13:15 CH 9 I CH 9 I 13:15 TV 19.FREEZE Press this button to hold the current video picture, Press the button twice to canncel. 20.SYSTEM BUTTON Press this button to select TV/IRC/HRC/STD format at NTSC TV signal.
1. Insert the AC plug into a conveniently located AC outlet (100-240V AC,50/60Hz). 2. T urn on the on/off switch 3. Press the to select the signals If no input signal, then a blue background appears.
<Left> or <R ight> key to ch ange OPERA TION INSTRUCTIONS Note: Tint can be adjusted only for NTSC color signal. SOUND The PICTURE S ETTING menu allows you to alter the picture adjustments. Press or to highlight the item you want to alter .
-20- OPERA TON INSTRUCTIONS CLOSED CAPTION 3.The password is OK, you may alter the TV Parental Guidelines...or MP AA Rating...or Canadian English Rating..or Canadian French Rating....,Press or to select the rating, press or to select the lock. Parents can select the rate for your children.
-21- OPERATION IN STRUCTIONS SETUP The setup menu allows you to setup other function. Press or to highlight the item you want to alter. 1. Language --- press or to select language 2. OSD Position --- press or to select the display position of OSD. 3. OSD Background --- press or to setup Opaque or translucent.
OPERA TION INSTRUCTIONS -22- CHANNEL SETTING 1. Press menu to select the follow menu. Press or to select Color sys, press or to set local system. Note: Press menu will end the auto search during searching, but automatic tuning will not be completed. 5.
OPERATION IN STRUCTIONS <Left> or <R ight> key to change -23- PICTURE SETTING Following modes are strongly suggested for set up mode. Press or to select the item you want to alter, then press or to adjust it.
OPERATION INSTRUCTIONS -24- 1. Horizontal --- Press the to move the Screen to the left. Press the to move the Screen to the right. 2. Vert ical --- Press the to move the Screen to up. Press the to move t he Screen t o down. 3. Auto Adjust --- Press the , the picture will be adjusted at best setting.
TROUBLESHOOTING GUIDE -25- TROUBLESHOOTING GUIDE SYMPTOM POSSIBLE CA USE POSSIBLE SO LUTION The AC pow er cord is no t connected The swi tch is swit ch off TV stati on expe riencing problems Picture s.
PERSONAL COMPUTER PERSONAL COM PUTER Note: If you continue to experience problems,have your TV serviced by qualified personnel.Never open the casing yourself. -26- Using the me nu system, adjust Brightness and Cont rast . No picture Pictureis fuzzy The comp uter is in power sav ing mode.
デバイスAstar LTV-2701の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Astar LTV-2701をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAstar LTV-2701の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Astar LTV-2701の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Astar LTV-2701で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Astar LTV-2701を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAstar LTV-2701の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Astar LTV-2701に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAstar LTV-2701デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。