NissanメーカーMaxima (2014)の使用説明書/サービス説明書
ページ先へ移動 of 432
® 2014 M AXI M A OWN E R’S MAN UAL For y our s afety , read car efully and keep in this v ehicle. 2014 N IS SAN MAX I MA A35-D Printing : July 2013 (13) Publication No.
W elcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepared to help you under- stand the operation and maintenance of your vehicle so that you may enjoy many miles (kilome- ters) of driving pleasure.
MODIFICA TION OF Y OUR VEHICLE This vehicle should not be modified. Modification could affect its performance, safety or durability, and may even violate governmental regulations. In addition, damage or per- formance problems resulting from modi- fications may not be covered under NISSAN warranties.
If you see this symbol, it means “Do not do this” or “Do not let this happen.” If you see a symbol similar to these in an illustra- tion, it means the arrow points to the front of the vehicle. Arrows in an illustration that are similar to these indicate movement or action.
NISSAN CARE S... Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Y our satisfaction with your vehicle and your NISSAN dealer are our primary concerns. Y our NISSAN dealer is always available to assist you with all your automobile sales and service needs.
T able of Contents Illustrated table of contents Safety—Seats, seat belts and supplemental restraint system Instruments and controls Pre-driving checks and adjustments Monitor, climate, audio, phone.
.
0 Illustrated table of contents Air bags, seat belts and child restraints ..............0 - 2 Exterior front ......................................0 - 3 Exterior rear .......................................0 - 4 Passenger compartment .................
1. T op tether strap anchor (P . 1-38) 2. Rear head restraints/headrests (P . 1-7) 3. Rear seat belts (P . 1-15) 4. Roof-mounted curtain side-impact supplemental air bag (P . 1-42) 5. Front seat-mounted side-impact supplemental air bags (P . 1-42) 6. Front head restraints/headrests (P .
1. Engine hood (P . 3-17) 2. Windshield wiper and washer switch (P . 2-28) 3. Windshield (P . 8-20) 4. Moonroof (if so equipped) (P . 2-46) 5. P ower windows (P . 2-43) 6. Door locks, NISSAN Intelligent K ey®, keys, request button (P . 3-4, 3-2, 3-2, 3-2) 7.
1. Rear window defroster switch (P . 2-29) 2. Interior trunk lid release (P . 3-19) 3. T runk lid (P . 3-17) 4. V ehicle loading (P . 9-12) 5. Exterior trunk lid release/request button (P . 3-12) 6. Replacing bulbs (P . 8-30) 7. Fuel-filler cap, fuel recommendation (P .
1. Interior trunk access (P . 1-5) 2. Moonroof (if so equipped) (P . 2-46) 3. Sun visors (P . 3-24) 4. Interior lights, illuminated entry (P . 2-50) 5. HomeLink® universal transceiver (if so equipped) (P . 2-53) 6. Interior mirrors (P . 3-25) 7. Glove box (P .
1. Side and center vents (P . 4-28) 2. Headlight/fog light (if so equipped)/turn signal switch (P . 2-30) 3. Steering wheel switch for audio control and Bluetooth® Hands-Free Phone System (P . 4-89, 4-92) 4. Meters and gauges (P . 2-3) 5. Driver supplemental air bag/horn (P .
24. V ehicle Dynamic Control (VDC) OFF switch (P . 2-37) Outside mirror controls (P . 3-27) Heated steering wheel switch (if so equipped) (P . 2-37) T runk lid release switch (P . 3-19) * Refer to the separate Navigation System Own- er’s Manual (if so equipped) .
1. P ower steering fluid reservoir (P . 8-13) 2. Engine oil filler cap (P . 8-10) 3. Brake fluid reservoir (P . 8-14) 4. Air cleaner (P . 8-19) 5. Fuse block (P . 8-22) 6. Battery (P . 8-15) 7. Fuse/fusible link box (P . 8-22) 8. Engine oil dipstick (P .
W arning light Name Page or Anti-lock Braking System (ABS) warn- ing light 2-11 or Brake warning light 2-11 Charge warning light 2-11 Engine oil pressure warning light 2-12 Low tire pressure warning l.
MEMO 0-10 Illustrated table of contents.
1 Safety—Seats, seat belts and supplemental restraint system Seats . ...........................................1 - 2 Front power seat adjustment . . ...................1 - 3 Folding rear seat (if so equipped) .................1 - 5 Front seat head restraints/headrests .
WARNING ● Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. Y ou could also slide under the lap belt and receive serious internal injuries.
FRONT POWER SEA T ADJUSTMENT Operating tips ● The power seat motor has an auto-reset overload protection circuit. If the motor stops during operation, wait 30 seconds, then reactivate the switch. ● Do not operate the power seat switch for a long period of time when the engine is off.
Seat lifter (driver’s seat) Push the front or rear end of the switch up or down to adjust the angle and height of the seat cushion. Lumbar support (driver’s seat) The lumbar support feature provides adjustable lower back support to the driver.
Thigh extension (driver’s side only , if so equipped) Pull up and hold the lever to extend the front portion to the desired position. FOLDING REAR SEA T (if so equipped) Interior trunk access For models without a rear center console, the trunk can be accessed from the passenger side of the rear seat for loading and unloading, as shown.
● When returning the seatbacks to the upright position, be certain they are completely secured in the latched posi- tion. If they are not completely secured, passengers may be injured in an acci- dent or sudden stop.
Center armrest Pull the armrest down until it rests on the seat cushion. FRONT SEA T HEAD RESTRAINTS/ HEADRESTS WARNING ● Head restraints/headrests supplement the other vehicle safety systems. They may provide additional protection against injury in certain rear end colli- sions.
● Adjustable head restraints/headrests have multiple notches along the stalk to lock them in a desired adjustment position. ● The non-adjustable head restraints/headrests have a single locking notch to secure them to the seat frame.
Removable Use the following procedure to remove the head restraints/headrests. 1. Pull the head restraint/headrest up to the highest position. 2. Push and hold the lock knob. 3. Remove the head restraint/headrest from the seat. 4. Store the head restraint/headrest properly in a secure place so it is not loose in the vehicle.
For non-adjustable head restraint/ headrest Make sure the head restraint/headrest is posi- tioned so the lock knob is engaged in the notch before riding in that designated seating position.
REAR SEA T HEAD RESTRAINTS/ HEADRESTS WARNING ● Head restraints/headrests supplement the other vehicle safety systems. They may provide additional protection against injury in certain rear end colli- sions. Adjust the head restraints/headrests properly, as speci- fied in this section.
Adjustable head restraint/headrest components 1. Removable head restraint/headrest 2. Multiple notches 3. Lock knobs 4. Stalks Non-adjustable head restraint/ headrest components 1. Removable head restraint/headrest 2. Single Notch 3. Lock knobs 4. Stalks Removal Use the following procedure to remove the head restraints/headrests.
Install 1. Align the head restraint/headrest stalks with the holes in the seat. Make sure the head restraint/headrest is facing the correct di- rection. 2. Push the head restraint/headrest down until it locks in place. For adjustable head restraint/headrest Adjust the head restraint/headrest so the center is level with the center of your ears.
T o raise the head restraint/headrest, pull it up. Make sure the head restraint/headrest is posi- tioned so the lock knob is engaged in the notch before riding in that designated seating position. T o lower, push and hold the lock knob and push the head restraint/headrest down.
● Do not attach anything to the head restraint/headrest stalks. Doing so could impair Active Head Restraint function. The Active Head Restraint moves forward utiliz- ing the force that the seatback receives from the occupant in a rear-end collision.
WARNING ● Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be properly re- strained in the rear seat and, if appro- priate, in a child restraint. WARNING ● The seat belt should be properly ad- justed to a snug fit.
WARNING ● Always route the shoulder belt over your shoulder and across your chest. Never put the belt behind your back, under your arm or across your neck. The belt should be away from your face and neck, but not falling off your shoulder. ● Position the lap belt as low and snug as possible AROUND THE HIPS, NO T THE WAIST .
PREGNANT WOMEN NISSAN recommends that pregnant women use seat belts. The seat belt should be worn snug and always position the lap belt as low as possible around the hips, not the waist. Place the shoulder belt over your shoulder and across your chest.
Fastening the seat belts 䊊 1 Adjust the seat. See “Seats” earlier in this section. 䊊 2 Slowly pull the seat belt out of the retractor and insert the tongue into the buckle until you hear and feel the latch engage. ● The retractor is designed to lock dur- ing a sudden stop or on impact.
䊊 3 P osition the lap belt portion low and snug on the hips as shown. 䊊 4 Pull the shoulder belt portion toward the retractor to take up extra slack.
T o increase your confidence in the seat belts, check the operation as follows: ● Grasp the shoulder belt and pull forward quickly . The retractor should lock and re- strict further belt movement. If the retractor does not lock during this check or if you have any questions about seat belt opera- tion, see a NISSAN dealer.
WARNING ● Only NISSAN seat belt extenders, made by the same company which made the original equipment seat belts, should be used with NISSAN seat belts. ● Adults and children who can use the standard seat belt should not use an extender. Such unnecessary use could result in serious personal injury in the event of an accident.
There are three basic types of child restraint systems: ● Rear-facing child restraint ● Forward-facing child restraint ● Booster seat The proper restraint depends on the child’s size. Generally , infants up to about 1 year and less than 20 lbs (9 kg) should be placed in rear-facing child restraints.
Once a child outgrows the height or weight limit of the harness-equipped forward-facing child re- straint, NISSAN recommends that the child be placed in a commercially available booster seat to obtain proper seat belt fit.
– Infants and children should never be held on anyone’s lap. Even the stron- gest adult cannot resist the forces of a collision. – Do not put a seat belt around both a child and another passenger. – NISSAN recommends that all child restraints be installed in the rear seat.
All U.S. states and Canadian provinces or territories require that infants and small children be restrained in an approved child restraint at all times while the vehicle is being operated. Canadian law requires the top tether strap on forward-facing child re- straints be secured to the designated an- chor point on the vehicle.
– Child restraint anchorages are de- signed to withstand only those loads imposed by correctly fitted child re- straints. Under no circumstances are they to be used to attach adult seat belts or other items or equipment to the vehicle. Doing so could damage the child restraint anchorages.
When installing a child restraint, carefully read and follow the instructions in this manual and those supplied with the child restraint. T op tether anchor point locations The child restraint top tether strap must be used when installing the child restraint with the LA T CH lower anchor attachments or seat belts.
2. Secure the child restraint anchor attach- ments to the LA T CH lower anchors. Check to make sure the LA T CH attachment is prop- erly attached to the lower anchors. 3. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments.
4. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the LA T CH attachment path. The child re- straint should not move more than 1 inch (25 mm) , from side to side.
WARNING The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being properly secured. The restraint could tip over or be loose and cause injury to a child in a sudden stop or collision.
3. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Locking Retractor (ALR) mode (child restraint mode) . It reverts to the Emergency Locking Retractor (ELR) mode when the seat belt is fully retracted.
6. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the seat belt path. The child restraint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the belt holds the restraint in place.
3. The back of the child restraint should be secured against the vehicle seatback. If necessary , adjust or remove the head restraint/headrest to obtain the correct child restraint fit. If the head restraint/headrest is removed, store it in a secure place.
6. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the LA T CH attachment path. The child re- straint should not move more than 1 inch (25 mm) , from side to side.
2. P osition the child restraint on the seat. Al- ways follow the child restraint manufactur- er’s instructions. The back of the child restraint should be secured against the vehicle seatback. If necessary , adjust or remove the head restraint/headrest to obtain the correct child restraint fit.
5. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in the belt. 6. Remove any additional slack from the seat belt; press downward and rearward firmly in the center of the child restraint with your knee to compress the vehicle seat cushion and seatback while pulling up on the seat belt.
9. Check to make sure the child restraint is properly secured prior to each use. If the seat belt is not locked, repeat steps 3 through 8. 10. If the child restraint is installed in the front passenger seat, place the ignition switch in the ON position.
4. Refer to the appropriate child restraint in- stallation procedure steps in this section before tightening the tether strap. If you have any questions when installing a top tether strap, consult your NISSAN dealer for details.
Booster seats of various sizes are offered by several manufacturers. When selecting any booster seat, keep the following points in mind: ● Choose only a booster seat with a label certifying that it complies with Federal Motor V ehicle Safety Standard 213 or Canadian Motor V ehicle Safety Standard 213.
1. If you must install a booster seat in the front seat, move the seat to the rear- most position. 2. P osition the booster seat on the seat. Only place it in a front-facing direction. Always follow the booster seat manufacturer’s in- structions. 3.
7. If the booster seat is installed in the front passenger seat, place the ignition switch in the ON position. The front passenger air bag status light may or may not illuminate, depending on the size of the child and the type of booster seat being used.
WARNING ● The front air bags ordinarily will not inflate in the event of a side impact, rear impact, rollover, or lower severity fron- tal collision. Always wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents.
WARNING ● Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding positions are shown.
WARNING ● Children may be severely injured or killed when the front air bags, side air bags or curtain air bags inflate if they are not properly restrained.
WARNING ● Even with the NISSAN Advanced Air Bag System, never install a rear-facing child restraint in the front seat. An in- flating front air bag could seriously in- jure or kill your child. See “Child re- straints” earlier in this section for details.
WARNING ● The seat belts, the side air bags and curtain air bags are most effective when you are sitting well back and upright in the seat with both feet on the floor.
SSS0159 SSS0162 1-48 Safety—Seats, seat belts and supplemental restraint system.
1. Roof-mounted curtain side-impact supplemental air bag inflators 2. Roof-mounted curtain side-impact supplemental air bags 3. Front seat-mounted side-impact supplemental air bag modules 4. Air bag Control Unit (ACU) 5. Supplemental front-impact air bag mod- ules 6.
The NISSAN Advanced Air Bag System has dual stage inflators. It also monitors information from the crash zone sensor, the Air Bag Control Unit (ACU) , seat belt buckle sensors and the occu- pant classification sensor (pattern sensor) . Infla- tor operation is based on the severity of a colli- sion and seat belt usage for the driver.
Front passenger air bag and status light WARNING The front passenger air bag is designed to automatically turn OFF under some condi- tions. Read this section carefully to learn how it operates. Proper use of the seat, seat belt and child restraints is necessary for most effective protection.
Front passenger seat adult occupants who are properly seated and using the seat belt as outlined in this manual should not cause the passenger air bag to be automatically turned OFF .
Other supplemental front-impact air bag precautions WARNING ● Do not place any objects on the steering wheel pad or on the instrument panel. Also, do not place any objects between any occupant and the steering wheel or instrument panel. Such objects may be- come dangerous projectiles and cause injury if the front air bags inflate.
Front seat-mounted side-impact supplemental air bag and roof- mounted curtain side-impact supplemental air bag systems The side air bags are located in the outside of the seatback of the front seats. The curtain air bags are located in the side roof rails.
● No unauthorized changes should be made to any components or wiring of the side air bag and curtain air bag systems. This is to prevent damage to or accidental inflation of the side air bag and curtain air bag or damage to the side air bag and curtain air bag systems.
After pretensioner activation, load limiters allow the seat belt to release webbing (if necessary) to reduce forces against the chest. The supplemental air bag warning light is used to indicate malfunctions in the pretensioner system. (See ⬙ SUPPLEMENT AL AIR BAG W ARNING LIGHT ⬙ in this section for more de- tails.
If any of the following conditions occur, the front air bag, side air bag, curtain air bag and preten- sioner systems need servicing: ● The supplemental air bag warning light re- mains on after approximately 7 seconds. ● The supplemental air bag warning light flashes intermittently .
2 Instruments and controls Instrument panel ...................................2 - 2 Meters and gauges ................................2 - 3 Speedometer and odometer . . ...................2 - 4 T achometer ....................................2 - 5 Engine coolant temperature gauge .
Moonroof (if so equipped) ......................... 2-46 P ower moonroof ............................... 2-46 Dual Panel Moonroof (if so equipped) ............... 2-47 P ower moonroof ............................... 2-47 Rear power sun shade (if so equipped) .
1. Side and center vents (P . 4-28) 2. Headlight/fog light (if so equipped)/turn signal switch (P . 2-30) 3. Steering wheel switch for audio control and Bluetooth® Hands-Free Phone System (P . 4-89, 4-92) 4. Meters and gauges (P . 2-3) 5. Driver supplemental air bag/horn (P .
24. V ehicle Dynamic Control (VDC) OFF switch (P . 2-37) Outside mirror controls (P . 3-27) Heated steering wheel switch (if so equipped) (P . 2-37) T runk lid release switch (P . 3-19) * Refer to the separate Navigation System Own- er’s Manual (if so equipped) .
SPEEDOMETER AND ODOMETER Speedometer The speedometer indicates the vehicle speed. Odometer/T win trip odometer The odometer/twin trip odometer is displayed when the ignition switch is placed in the ON position. The odometer 䊊 1 records the total distance the vehicle has been driven.
T ACHOMETER The tachometer indicates engine speed in revo- lutions per minute (RPM) . Do not rev the engine into the red zone 䊊 1 . CAUTION When engine speed approaches the red zone, shift to a higher gear or reduce en- gine speed. Operating the engine in the red zone may cause serious engine damage.
FUEL GAUGE The gauge indicates the approximate fuel level in the tank. The gauge may move slightly during braking, turning, acceleration, or going up or down hills. The gauge needle returns to E (Empty) after the ignition is placed in the OFF position.
COMP ASS DISPLA Y Push the button for about 1 second when the ignition switch is placed in the ON position to toggle the outside temperature and compass direction display 䊊 1 on or off. The display will indicate the direction that the vehicle is heading.
Zone variation change procedure The difference between magnetic north and geo- graphical north is known as variance. In some areas, this difference can sometimes be great enough to cause false compass readings. Follow these instructions to set the variance for your particular location if this happens: 1.
1. With the display turned on, press and hold the for about 10 seconds. The “C” icon in the compass display will illuminate. 2. Calibrate the compass by driving the vehicle in three complete circles at a maximum speed of 5 MPH (8 km/h). 3. After completing the circles, the display should return to normal.
or Anti-lock Braking System (ABS) warning light Supplemental air bag warning light Malfunction Indicator Light (MIL) or Brake warning light Continuously V ariable T ransmission (CVT) indicator light S.
or Anti-lock Braking System (ABS) warning light When the ignition switch is placed in the ON position, the Anti-lock Braking System (ABS) warning light illuminates and then turns off.
CAUTION ● Do not ground electrical accessories di- rectly to the battery terminal. Doing so will bypass the variable control system and the vehicle battery may not charge completely. Refer to “V ariable voltage control system (if so equipped) ” in the “Maintenance and do-it-yourself” sec- tion later in this manual.
TPMS malfunction: If the TPMS is not functioning properly , the low tire pressure warning light will flash for approxi- mately 1 minute when the ignition switch is placed in the ON position. The light will remain on after the 1 minute. Have the system checked by a NISSAN dealer.
Master warning light When the ignition is in the ON position, the master warning light illuminates if any of the fol- lowing are displayed on the vehicle information display .
Continuously V ariable T ransmission (CVT) position indicator light When the ignition switch is placed in the ON position, the indicator light shows the shift lever position. See “Driving the vehicle” in the “Starting and driving” section of this manual.
● Malfunction indicator light blinking — An en- gine misfire has been detected which may damage the emission control system. T o re- duce or avoid emission control system dam- age: – do not drive at speeds above 45 MPH (72 km/h). – avoid hard acceleration or deceleration.
AUDIBLE REMINDERS Brake pad wear warning The disc brake pads have audible wear warnings. When a disc brake pad requires replacement, it makes a high pitched scraping sound when the vehicle is in motion, whether or not the brake pedal is depressed. Have the brakes checked as soon as possible if the warning sound is heard.
HOW T O USE THE VEHICLE INFORMA TION DISPLA Y Press the button, located on the instru- ment panel just behind the steering wheel, to display the following modes: MPG → MPG/MPH → Time/Miles → Ran.
Time/Miles (km) mode The time/miles (km) mode can be selected to show the time and distance driven since the last reset. Range mode The range mode can be selected to give you an estimation of the distance that can be driven before refueling.
In case of a low tire pressure, a warning message will also appear in the vehicle information display . See “Check tire pressure warning” later in this section. Exterior temperature mode The exterior temperature mode can be selected to provide you with the temperature outside of your vehicle.
Alert mode The alert mode allows you to set alerts notifying you of time to rest or icy conditions. The time to rest alert lets you know when you have been traveling for a long time and may need a break. The icy alert notifies you that icy driving condi- tions may exist.
Options mode The LANGUAGE/UNIT/EFFECTS screen will appear when selecting the “Language/Unit/Effects” key and pressing . Language: English, French or Spanish Unit: US — mile, °F , MPG Metric — km, °C, L/100 km Effects: This changes effects of the indicator needles when ON.
V ehicle information display warnings and indicators 1. Door and trunk open warning 2. Push warning 3. Low fuel warning 4. Low windshield-washer fluid warning 5. No key warning 6. Parking brake warning 7. Shift P warning 8. Engine start operation indicator 9.
12. Loose fuel cap warning 13. Check tire pressure warning 14. Tire pressure warning 15. I-K ey System Error: See Owner’s Manual Door and trunk open warning This warning illuminates when a door or the trunk has been opened when the engine is running.
This indicator means that the engine will start by pushing the push-button ignition switch with the brake pedal depressed. NISSAN Intelligent Key® insertion indica- tor This indicator illuminates when the Intelligent K ey needs to be inserted into the Intelligent K ey port.
Y our vehicle has two types of security systems: ● V ehicle security system ● NISSAN V ehicle Immobilizer System VEHICLE SECURITY S Y STEM The vehicle security system provides visual and audible alarm signals if someone opens the doors or trunk lid when the system is armed.
The alarm is activated by: ● opening the door or trunk lid without using the key or Intelligent K ey (even if the door is unlocked by releasing the door inside lock switch) .
Security indicator light The security indicator light blinks whenever the ignition switch is placed in the OFF , LOCK or ACC position. This function indicates the NISSAN V e- hicle Immobilizer System is operational.
CAUTION ● Do not operate the washer continuously for more than 30 seconds. ● Do not operate the washer if the windshield-washer fluid reservoir is empty. ● Do not fill the windshield-washer fluid reservoir with washer fluid concen- trates at full strength.
XENON HEADLIGHTS (if so equipped) WARNING c HIGH VOL T AGE ● When xenon headlights are on, they produce a high voltage. T o prevent an electric shock, never attempt to modify or disassemble. Always have your xe- non headlights replaced at a NISSAN dealer.
HEADLIGHT CONTROL SWIT CH Lighting 䊊 1 When turning the switch to the posi- tion, the front parking, tail, license plate and instrument panel lights come on. 䊊 2 When turning the switch to the posi- tion, the headlights come on and all the other lights remain on.
T o turn on the autolight system: 1. Place the headlight switch in the AUT O po- sition 䊊 1 . 2. Place ignition in the ON position. 3. The autolight system automatically turns the headlights on and off.
CAUTION Even though the battery saver feature au- tomatically turns off the headlights after a period of time, you should turn the head- light switch to the OFF position when the engine is not running to avoid discharging the vehicle battery.
TURN SIGNAL SWIT CH T urn signal 䊊 1 Move the lever up or down to signal the turning direction. When the turn is com- pleted, the turn signal cancels automatically . FOG LIGHT SWIT CH (if so equipped) T o turn the fog lights on, turn the headlight switch to the position, then turn the fog light switch to the position.
The front seats are warmed by built-in heaters. The switch is located on the center console. 1. Start the engine. 2. Push the L O or HI position of the switch, as desired. The indicator light in the switch will illuminate. The heater is controlled by a thermostat, automatically turning the heater on and off.
The climate controlled seat warms up or cools down the front seat by blowing warm or cool air from the surface of the seat. The climate control switch is located on the center console. The climate controlled seat can be operated as follows: 1. Start the engine.
The heated steering wheel system is designed to operate only when the surface temperature of the steering wheel is below 68°F (20°C) . Push the heated steering wheel switch to warm the steering wheel after the engine starts. The indicator light will come on.
The power outlets are for powering electrical accessories such as cellular telephones. They are rated at 12 V olt, 120 W (10A) maximum. The power outlets are powered only when the ignition switch is in the ACC or ON position. CAUTION ● The outlet and plug may be hot during or immediately after use.
SEA TBACK POCKETS The seatback pockets are located on the back of the driver’s and passenger’s seats. The pockets can be used to store maps. SUNGLASSES HOLDER T o open the sunglasses holder, push and release. Only store one pair of sunglasses in the holder.
CUP HOLDERS CAUTION ● Avoid abrupt starting and braking when the cup holder is being used to prevent spilling the drink. If the liquid is hot, it can scald you or your passenger. ● Use only soft cups in the cup holder. Hard objects can injure you in an accident.
Soft bottle holder CAUTION ● Do not use bottle holder for any other objects that could be thrown about in the vehicle and possibly injure people during sudden braking or an accident. ● Do not use bottle holder for open liquid containers. GL OVE BOX Open the glove box by pulling the handle.
Lower half Pull up on the passenger’s side latch to open the lower half of the console box. A power outlet is located inside the console box and there is stor- age for compact discs. GROCER Y HOOKS The grocery hooks are located in the trunk and can be used to hang a standard size plastic grocery bag.
T o install a cargo net, attach the net to the retain- ers. T o remove a cargo net, detach the net from the retainers. POWER WINDOWS WARNING ● Make sure that all passengers have their hands, etc . inside the vehicle while it is in motion and before closing the windows.
Driver’s side power window switch The driver’s side control panel is equipped with switches to open or close all of the windows. T o open a window, push the switch to the first detent and continue to hold down until the de- sired window position is reached.
Automatic operation T o fully open a window equipped with automatic operation, press the window switch down to the second detent and release it; it need not be held. The window automatically opens all the way . T o stop the window , lift the switch up while the window is opening.
POWER MOONROOF The moonroof will only operate when the ignition switch is placed in the ON position. The power moonroof is operational for a period of time, even if the ignition switch is placed in the ACC or OFF position.
When closing: If the control unit detects something caught in the moonroof as it moves to the front, the moonroof will immediately open backward. When tilting down: If the control unit detects something caught in the moonroof as it tilts down, the moonroof will im- mediately tilt up.
Sliding the moonroof T o slide the moonroof: ● T o fully open the moonroof, push the switch 䊊 1 toward the open position until it reaches the second detent.
Sunshade T o open the sunshade: ● T o fully open the sunshade, push the switch 䊊 1 toward the open position until it reaches the first detent. ● T o fully open the sunshade and the moon- roof together, push the switch 䊊 1 toward the open position until it reaches the second detent.
CAUTION ● Do not place objects (such as newspa- pers, handkerchiefs, etc .) on the screen inlet port. Doing so may entangle these objects in the screen when it is extend- ing or retracting, causing improper op- eration or damage to the screen. ● Do not push the sun shade arm with your hands, etc .
NO TE: The footwell and doorstep lights illuminate when the driver and passenger doors are opened regardless of the interior light switch position. These lights will turn off automatically after a period of time while doors are open to prevent the battery from becoming discharged.
Models without moonroof WIC1494 Models with moonroof WIC1494 Models with dual panel moonroof LIC1409 2-52 Instruments and controls.
T o turn the map lights on, press the switches. T o turn them off, press the switches again. CAUTION Do not use for extended periods of time with the engine stopped. This could result in a discharged battery. The light illuminates when the trunk lid is opened.
WARNING ● Do not use the HomeLink® Universal T ransceiver with any garage door opener that lacks safety stop and re- verse features as required by federal safety standards. (These standards be- came effective for opener models manufactured after April 1, 1982) .
3. Press and hold the programmed HomeLink® button and observe the indica- tor light. ● If the indicator light 䊊 1 is solid/continuous, programming is complete and your device should acti- vate when the HomeLink® button is pressed and released.
press and hold the desired HomeLink® but- ton while you press and re-press (“cycle”) your hand-held transmitter every two sec- onds until the frequency signal has been learned. The HomeLink® indicator light will flash slowly and then rapidly after several seconds upon successful training.
2. The indicator light will begin to flash after 20 seconds. Without releasing the HomeLink® button, proceed with “Pro- gramming HomeLink®” - Step 1. For questions or comments, contact HomeLink® at: www .homelink.com or 1–800–355–3515 (except Mexico) .
MEMO 2-58 Instruments and controls.
3 Pre-driving checks and adjustments K e y s .............................................3 - 2 NISSAN Intelligent K ey® ........................3 - 2 NISSAN V ehicle Immobilizer System keys .........3 - 3 Doors ......................................
1. T wo Intelligent Keys 2. Mechanical keys with built-in transpon- der chip (inside Intelligent K eys) 3. K ey number plate NISSAN INTELLIGENT KEY® Y our vehicle can only be driven with the Intelligent K eys which are registered to your vehicle’s Intel- ligent K ey system components and NISSAN V e- hicle Immobilizer System components.
Mechanical key The Intelligent K ey contains the mechanical key, which can be used in case of a discharged bat- tery . T o remove the mechanical key, release the lock knob on the back of the Intelligent K ey. T o install the mechanical key, firmly insert it into the Intelligent K ey until the lock knob returns to the lock position.
Any key that is not given to your dealer at the time of registration will no longer be able to start your vehicle. CAUTION Do not allow the immobilizer system key, which contains an electrical transponder, to come into contact with water or salt water.
Opening and closing windows The driver’s door key operation allows you to open and close windows equipped with auto- matic operation at the same time. ● T o open the windows, turn the driver’s door key toward the rear of the vehicle for longer than 1 second after the door is unlocked.
Lockout protection When the power door lock switch (driver’s or front passenger’s side) is moved to the lock position with the Intelligent K ey in the port and any door open, all doors will lock and unlock automatically .
WARNING ● Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufac- turer for the possible influences before use. ● The Intelligent Key transmits radio waves when the buttons are pressed.
CAUTION Listed below are conditions or occur- rences which will damage the Intelligent Key: ● Do not allow the Intelligent Key, which contains electrical components, to come into contact with water or salt water. This could affect the system function.
If the Intelligent Key is too close to the door glass, handle or rear bumper, the request switches may not function. When the Intelligent K ey is within the operating range, it is possible for anyone, even someone who does not carry the Intelligent K ey, to push the request switch to lock/unlock the doors.
NISSAN INTELLIGENT KEY® OPERA TION Y ou can lock or unlock the doors without taking the Intelligent K ey out of your pocket or bag. When you carry the Intelligent K ey with you, you can lock or unlock all doors by pushing the door handle request switch within the range of opera- tion.
● Doors do not lock with the door handle request switch with the Intelligent K ey inside the vehicle and a beep sounds to warn you. However, when an Intelligent K ey is inside the vehicle, doors can be locked with an- other Intelligent K ey.
All doors will be locked automatically unless one of the following operations is performed within 60 seconds after pushing the request switch. ● Opening any door. ● Pushing the ignition switch. The interior light timer illuminates for a period of time when a door is unlocked and the room light switch is in the DOOR position.
When all doors are locked and the trunk lid is closed with the Intelligent K ey inside the trunk, the outside buzzer will sound and the trunk will open. HOW T O USE THE REMO TE KEYLESS ENTR Y FUNCTION The remote keyless entry function can operate all door locks using the remote keyless function of the Intelligent K ey.
Unlocking doors 1. Press the button on the Intelligent Ke y. 2. The hazard warning lights flash once. 3. Press the button again within 60 sec- onds to unlock all doors. All doors will be locked automatically unless one of the following operations is performed within 1 minute after pressing the button.
Using the panic alarm If you are near your vehicle and feel threatened, you may activate the panic alarm to call attention by pressing and holding the button on the Intelligent K ey for longer than 0.5 seconds. The panic alarm and headlights will stay on for a period of time.
TROUBLESHOO TING GUIDE V erify the location of all Intelligent K eys that are programmed for the vehicle. If another Intelligent K ey is in range or inside the vehicle, the vehicle system may respond differently than expected.
䊊 1 Pull the hood lock release handle located below the driver side instrument panel. The hood will spring up slightly . 䊊 2 Push the lever at the front of the hood to the side as illustrated with your fingertips and raise the hood. When closing the hood, lower it slowly and make sure it locks into place.
OPENER OPERA TION WARNING ● Do not drive with the trunk lid open. This could allow dangerous exhaust gases to be drawn into the vehicle. See “Ex - haust gas” in the “Starting and driving” section of this manual.
INTERIOR TRUNK LID RELEASE WARNING Closely supervise children when they are around cars to prevent them from playing and becoming locked in the trunk where they could be seriously injured. Keep the car locked, with the rear seatback and trunk lid securely latched when not in use, and prevent children’s access to car keys.
OPENING THE FUEL -FILLER DOOR The fuel-filler door automatically unlocks when the driver’s door is unlocked. 1. Unlock the fuel-filler door using one of the following operations. ● Unlock the driver’s door with the keyfob. ● Push the power door lock switch to the unlock position.
CAUTION ● Do not use E-15 or E-85 fuel in your vehicle. For further information see the “Fuel Recommendation” in the “T echni- cal and consumer information” section of this manual. ● The LOOSE FUEL CAP warning will ap- pear if the fuel-filler cap is not properly tightened.
Loose Fuel Cap warning The L OOSE FUEL CAP warning appears in the vehicle information display when the fuel-filler cap is not tightened correctly after the vehicle has been refueled. It may take a few driving trips for the message to be displayed. T o turn off the warning, perform the following: 1.
MANUAL OPERA TION (if so equipped) Tilt and telescopic operation Pull the lock lever 䊊 1 all the way towards you: ● Adjust the steering wheel forward or back - ward in direction 䊊 2 to the desired position. ● Adjust the steering wheel up or down in direction 䊊 3 to the desired position.
䊊 1 T o block glare from the front, swing down the sun visor. 䊊 2 T o block glare from the side, remove the sun visor from the center mount and swing the visor to the side. 䊊 3 Slide the extension sun visor in or out as needed. CAUTION ● Do not store the sun visor before return- ing the extension to its original position.
AUT OMA TIC ANTI-GLARE REARVIEW MIRROR The inside mirror is designed so that it automati- cally dims during night time conditions and ac- cording to the intensity of the headlights of the vehicle following you. The automatic anti-glare feature is activated when the ignition switch is placed in the ON position.
T ype B and T ype C The indicator light 䊊 2 will illuminate when the automatic anti-glare feature is operating. T o turn off the automatic anti-glare feature, press: ● the O button for inside mirrors without compass. ● the button for inside mirrors with compass.
OUTSIDE MIRRORS The outside mirror remote control will operate only when the ignition switch is in the ACC or ON position. Move the small switch 䊊 1 to select the right or left mirror. Adjust each mirror to the desired position using the large switch 䊊 2 .
NO TE: If the outside mirror control switch is in the neutral position, neither mirror will turn downward when the shift lever is moved to R (Reverse) .
MEMOR Y ST ORAGE FUNCTION T wo positions for the driver’s seat, steering col- umn, and outside mirrors can be stored in the automatic drive positioner memory . Follow these procedures to use the memory system. 1. Set the Continuously V ariable T ransmission (CVT) shift lever to the P (Park) position.
1. Connect the battery cable or replace the fuse. 2. Open and close the driver’s door more than 2 times with the ignition switch in the L OCK position. Once the memory storage function has been restarted, you can store a memory position. See “Memory storage function” in this sec- tion.
4 Monitor, climate, audio, phone and voice recognition systems Control panel buttons — color screen without Navigation System (if so equipped) ..................4 - 4 How to use the NISSAN controller ...............4 - 5 How to select menus on the screen .
FM/AM radio with compact disc (CD) changer (if so equipped) ....................... 4-51 FM/AM/SA T radio with compact disc (CD) player (if so equipped) ......................... 4-56 FM/AM/SA T radio with CD/DVD player (if so equipped) ..............
NISSAN V oice Recognition Standard Mode ..... 4-119 Using the system ............................. 4-121 Before starting ............................... 4-121 Giving voice commands ....................... 4-121 NISSAN V oice Recognition Alternate Command Mode .
WARNING ● Positioning of the heating or air condi- tioning controls and display controls should not be done while driving in or- der that full attention may be given to the driving operation. ● Do not disassemble or modify this sys- tem. If you do, it may result in accidents, fire, or electrical shock.
CAUTION ● The glass display screen may break if it is hit with a hard or sharp object. If the glass screen breaks, do not touch it. Doing so could result in an injury. ● T o clean the display, never use a rough cloth, alcohol, benzine, thinner or any kind of solvent or paper towel with a chemical cleaning agent.
HOW T O SELECT MENUS ON THE SCREEN V ehicle functions are viewed on the center dis- play screen in menus. Whenever a menu selec- tion is made or menu item is highlighted, different areas on the screen provide you with important information. See the following for details: 1.
Menu Item Result Fuel Economy Displays Fuel Economy menu. Distance to Empty Displays an estimation of the distance that the vehicle can be driven before refueling. The D TE is constantly calculated based on the amount of fuel in the fuel tank and actual fuel consumption.
HOW T O USE THE SETTING BUTT ON Press the SETTING button. This screen displays and adjusts various settings and functions that are available for your vehicle. Use the NISSAN controller to select an item and then press the ENTER button. When the amber indicator next to an item is illuminated, the feature is enabled.
Menu Item Result Audio See “ Audio system” in this section for more information. Display Adjusts the settings for the display screen. Brightness/Contrast Adjusts the brightness or contrast of the map background. Display off T oggles the display screen on and off.
Menu Item Result Comfort & Convenience Select the “Others” key using the NISSAN controller, then select the “Comfort” key. The Comfort settings screen will be displayed. Y ou can set the following operating conditions by selecting the desired item using the NISSAN controller.
1. Z OOM OUT button* 2. ST A TUS button (P . 4-15) 3. DEST button* 4. ROUTE button* 5. NISSAN controller (P . 4-12) 6. INFO button (P . 4-15) 7. PHONE button** 8. + (brightness control) button 9. OFF brightness control button (P . 4-19) 10. - (brightness control) button 11.
HOW T O USE THE NISSAN CONTROLLER Use the NISSAN controller to choose an item on the display screen. Highlight an item on the dis- play using the main directional buttons 䊊 2 (cer- tain Navigation System functions use the addi- tional directional buttons 䊊 6 ) or the center dial 䊊 3 .
T ouch screen operation With this system, the same operations as those for the NISSAN controller are possible using the touch screen operation. Menu Item Result Selecting the item T ouch an item to select . T o select the “Navigation” key, touch the “Navigation” key 䊊 1 on the screen.
T ouch screen maintenance If you clean the display screen, use a dry , soft cloth. If additional cleaning is necessary , use a small amount of neutral detergent with a soft cloth. Never spray the screen with water or de- tergent. Dampen the cloth first, and then wipe the screen.
HOW T O USE THE ST A TUS BUTT ON The ST A TUS button is used to display system information. Three different split screens of infor- mation are available.
Menu Item Result Fuel Economy Displays Fuel Economy menu. Distance to Empty Displays an estimation of the distance that the vehicle can be driven before refueling. The DTE is constantly calculated based on the amount of fuel in the fuel tank and actual fuel consumption.
HOW T O USE THE SETTING BUTT ON Press the SETTING button. This screen displays and adjusts various settings and functions that are available for your vehicle.
Menu Item Result Others Select the “Others” key using the NISSAN controller. V oice Recognition, language and units setting screen will be displayed. Comfort Select the “Others” key using the NISSAN controller, then select the “Comfort” key.
Menu Item Result Select Language Changes the language of the menus on the display screen. If you select the “Francais” key, French language screens will be displayed, s o please use the French Owner’s Manual.
USING THE IMAGE VIEWER When a compatible portable storage device is plugged into the USB jack located in the center console, compatible image files stored on the device can be viewed on the control panel de- vice.
Viewing images in a slideshow T o view all of the images on the device in a slideshow , first enter the full screen mode while viewing one of the images. The slideshow control buttons are located on the right side of the screen. Select the play key to begin the slideshow .
When the shift lever is shifted into the R (Re- verse) position, the monitor display shows a rear- ward view from the vehicle. WARNING ● The system is designed as an aid to the driver in detecting large stationary ob- jects to help avoid damaging the ve- hicle.
V ehicle width guide lines 䊊 5 : Indicate the vehicle width when backing up. Predicted course lines 䊊 6 : Indicate the predicted course when backing up. The predicted course lines will be displayed on the monitor when the shift selector is in the R (Reverse) position and the steering wheel is turned.
1. Visually check that the parking space is safe before parking your vehicle. 2. The rear view of the vehicle is displayed on the screen 䊊 A when the shift lever is moved to the R (Reverse) position. 3. Slowly back up the vehicle adjusting the steering wheel so that the predicted course lines 䊊 B enter the parking space 䊊 C .
Backing up on a steep uphill When backing up the vehicle up a hill, the dis- tance guide lines and the vehicle width guide lines are shown closer than the actual distance. For example, the display shows 3 ft (1.0 m) to the place 䊊 A , but the actual 3 ft (1.
the hill is the place 䊊 B . Note that any object on the hill is closer than it appears on the monitor. Backing up near a projecting object The predicted course lines 䊊 A do not touch the object in the display . However, the vehicle may hit the object if it projects over the actual backing up course.
the position 䊊 A if the object projects over the actual backing up course. HOW T O ADJUST THE SCREEN T o adjust the Display ON/OFF , Brightness, Tint, Color, Contrast and Black Level of the RearView Monitor, press the SETTING button with the RearView Monitor on and select the “Display” key .
Adjust air flow direction by moving the vent slides. Open or close the vents by using the dial. Move the dial toward the to open the vents or toward the to close them.
1. T emperature control buttons (driver’s side) 2. AUT O climate control ON button 3. (front defroster) button 4. Air recirculation button 5. MODE (manual air flow control) button 6. T emperature control buttons (passen- ger’s side) 7. DUAL (passenger side temperature control) ON/OFF button 8.
NO TE: ● Odors from inside and outside the vehicle can build up in the air conditioner unit. Odor can enter the passenger compartment through the vent. ● When parking, set the heater and air condi- tioner controls to turn off air recirculation to allow fresh air into the passenger compart- ment.
MANUAL OPERA TION Fan speed control T urn the fan speed control dial to manually control the fan speed. Press the AUT O button to return to automatic control of the fan speed. Air recirculation Press the air recirculation button to recir- culate interior air inside the vehicle.
1. Air recirculation button 2. A/C (air conditioner) ON/OFF button 3. MODE (manual air flow control) button 4. Fresh air intake button 5. T emperature control buttons (passen- ger’s side)/DUAL (passenger’s side temperature control) ON/OFF button 6.
NO TE: ● Odors from inside and outside the vehicle can build up in the air conditioner unit. Odor can enter the passenger compartment through the vents. ● When parking, set the heater and air condi- tioner controls to turn off air recirculation to allow fresh air into the passenger compart- ment.
MANUAL OPERA TION Fan speed control T urn the fan speed control dial to manually control the fan speed. Press the AUT O button to return to automatic control of the fan speed. Air recirculation Press the air recirculation button to recir- culate interior air inside the vehicle.
The air conditioner system in your NISSAN ve- hicle is charged with a refrigerant designed with the environment in mind. This refrigerant does not harm the earth’s ozone layer. Special charging equipment and lubricant is re- quired when servicing your NISSAN air condi- tioner.
Static and flutter: During signal interference from buildings, large hills or due to antenna position (usually in conjunction with increased distance from the station transmitter) , static or flutter can be heard. This can be reduced by adjusting the treble control to reduce treble response.
Compact disc (CD) player (models without Navigation System) CAUTION ● Do not force a compact disc into the CD insert slot. This could damage the CD and/or CD changer/player. ● T rying to load a CD with the CD door closed could damage the CD and/or CD changer.
CD/DVD combination player (models with Navigation System) ● Do not force a disc into the CD/DVD insert slot. This could damage the CD/DVD player. ● During cold weather or rainy days, the player may malfunction due to the hu- midity. If this occurs, remove the CD/DVD and dehumidify or ventilate the player completely.
Region Invalid ● The DVD is not for region 1 or all regions. ● Use DVDs with a region code “1” , “ ALL ” or “1 included” for your DVD entertainment system. (The region code 䊊 A is displayed as a small sym- bol printed on the top of the DVD 䊊 B .
CAUTION ● Do not force the USB device into the USB port. Inserting the USB device tilted or up-side-down into the port may damage the port. Make sure that the USB device is connected correctly into the USB port. ● Do not grab the USB port cover (if so equipped) when pulling the USB device out of the port.
● The Bluetooth® audio may be stopped un- der the following conditions: ● Receiving a call on the Hands-Free Phone System. ● Checking the connection to the hands- free phone.
Playback order: Music playback order of a CD with MP3 or WMA files is as illustrated. ● The names of folders not containing MP3 or WMA files are not shown in the display . ● If there is a file in the top level of the disc, “Root Folder” is displayed.
Specification chart : Supported media CD, CD-R, CD-RW , USB 2.0 Supported file systems CD, CD-R, CD-RW , ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. * Files saved using the Live File System component (on a Windows Vista® operating system-based computer) are not supported.
T roubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the CD/USB device was inserted correctly. Check if the CD is scratched or dirty. Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player.
CD, DVD or USB with Compressed Audio Files (models with Navigation System) The file types supported by this system are MP3, WMA , AAC/M4A and A TRAC3. Explanation of terms: ● MP3 — MP3 is short for Moving Pictures Experts Group Audio Layer 3. MP3 is the most well known compressed digital audio file format.
Playback order: Music playback order of a CD, DVD or USB device with compressed audio files is as illus- trated. ● The folder names of folders not containing compressed audio files are not shown in the display . ● If there is a file in the top level of the disc/USB, “Root Folder” is displayed.
Specification chart : Supported media CD, CD-R, CD-RW , DVD-ROM, DVD±R, DVD±RW, DVD±R DL, USB 2.0 Supported file systems CD, CD-R, CD-RW , DVD-ROM, DVD±R, DVD±RW, DVD±R DL, ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported.
T roubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the CD/DVD/USB device was inserted correctly. Check if the CD/DVD is scratched or dirty. Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player.
Compressed Video Files (models with Navigation System) Explanation of terms: ● DivX – DivX refers to the DivX® codec owned by Div , Inc. used for a lossy compres- sion of video based on MPEG-4. ● A VI – A VI stands for Audio Video Interleave.
Requirements for Supporting Video Playback: Media CD, CD-R, CD-RW, DVD, DVD±R, DVD±RW , DVD±RW DL, USB 2.0 Memory File Systems CD, CD-R, CD-RW , DVD, DVD±R, DVD±RW , DVD±RW DL ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet, UDF Bridge (UDF1.02+ISO9660) , UDF1.
1. CD eject button 2. VOL/ON·OFF control knob 3. Station and CD select (1 - 6) buttons 4. L OAD CD button 5. TUNE/FOLDER and AUDIO control knob (Bass, T reble, Fade, Balance, SSV (if so equipped) , and Beep) 6. AUX IN jack 7. AUX button 8. TRACK button 9.
Audio control knob Audio Bass Adjusts the bass to the desired level. T reble Adjusts the treble to the desired level. Balance Adjusts the balance to the desired level. Balance adjusts the sound level between the left and right speakers. Fade Adjusts the fade to the desired level.
MP3 display mode T o change the text displayed when listening to a CD with MP3s and ID3 tags, press the DISP/CL OCK button. The DISP/CLOCK button will scroll through the CD text as follows: Disc number, T rack number and Folder number ←→ Folder title ←→ Song title ←→ Artist name ←→ Album title.
Compact disc (CD) changer operation Place the ignition switch in the ACC or ON position and press the L OAD button, then press one of the CD insert (1 – 6) slots. Insert the compact disc into the slot with the label side facing up. The compact disc will be guided auto- matically into the slot and start playing.
1 Disc Repeat: The disc that is currently playing will be repeated. 1 T rack Repeat: The track that is currently playing will be repeated. 1 Folder Repeat: The folder that is currently being accessed will be repeated. All Disc Random: All discs loaded will be played in a mixed order.
1. CD eject button 2. VOL/ON·OFF control knob 3. Station select (1 - 6) buttons 4. TUNE/FOLDER and AUDIO control knob (Bass, T reble, Fade and Balance) 5. AUX button* 6. TRACK button 7. SEEK/CA T button 8. DISC button 9. RPT/RDM button 10. SCAN button 11.
Audio control knob Audio Bass Adjusts the bass to the desired level. T reble Adjusts the treble to the desired level. Balance Adjusts the balance to the desired level. Balance adjusts the sound level between the left and right speakers. Fade Adjusts the fade to the desired level.
CD/MP3 display mode While listening to a CD or an MP3/WMA CD, certain text might be able to be displayed (when CD encoded with text is being used) . Depending on how the CD or MP3/WMA CD is encoded, the following text might be able to be displayed by selecting the “T ext” key: ● Folder displays the name of the current folder being accessed.
XM band select : Pressing the AUX button will change the band as follows: USB → XM1* → XM2* → XM3* → AUX → USB (satellite, if so equipped) When the AUX button is pressed while the igni- tion switch is in the ACC or ON position, the radio will come on at the station last played.
When the “T ext” key is selected with the NISSAN controller on the display while the radio is playing, additional information is displayed on the screen.
CD EJECT button: When the button is pressed with the com- pact disc loaded, the compact disc will be ejected. When the button is pressed while the compact disc is being played, the compact disc will eject and the system will turn off. AUX (auxiliary) input jacks The auxiliary input jacks are located inside the center console 䊊 1 .
AUX settings Select the “Settings” key using the NISSAN con- troller and press the ENTER button. Choose one of the display modes by selecting the “ ” key or the “ ” key: ● Normal ● Wid.
1. CD eject button 2. VOL/ON·OFF control knob 3. Station select (1 - 6) buttons 4. TUNE/FOLDER and AUDIO control knob (Bass, T reble, Fade and Balance) 5. DISC·AUX button 6. TRACK button 7. SEEK/CA T button 8. SA T* button 9. RPT/RDM button 10. SCAN button 11.
Audio settings Audio Bass Adjusts the bass to the desired level. T reble Adjusts the treble to the desired level. Balance Adjusts the balance to the desired level. Balance adjusts the sound level between the left and right speakers. Fade Adjusts the fade to the desired level.
Display album cover art : When an audio source encoded with album cover art is played, the album cover art can be displayed on the screen. T o toggle this feature on or off, touch the “Display Album Cover Art” key . When the feature is activated, the amber indica- tor next to the word ON will illuminate.
The FM stereo indicator STEREO will illuminate during FM stereo reception. When the stereo broadcast signal is weak, the radio will automati- cally change from stereo to monaural reception.
Menu (SiriusXM Satellite Radio, if so equipped) Select the “Menu” key using the NISSAN control- ler or touchscreen to see a list of options: ● Preset List – Displays the list of presets. Press and hold the touchscreen or ENTER button on the NISSAN controller to save a preset.
SEEK/CA T and TRACK buttons: When the SEEK/CA T button is pressed while a compact disc is playing, the track being played returns to its beginning. Press several times to skip back through tracks. The compact disc will go back the number of times the button is pressed.
● Play Mode This option allows you to alter the play pattern of the CD. T ouch the key of the mode you wish to apply . The modes change the play pattern as follows: 1 T rack Repeat - the current track is repeated. 1 Disc Random- tracks from the entire disc are played randomly .
● T rack List The tracks on the disc are displayed. Select the key of a track name to begin playing that track. CD EJECT button: When the button is pressed with the com- pact disc loaded, the compact disc will be ejected. When the button is pressed while the compact disc is being played, the compact disc will eject and the system will turn off.
AUX settings Select the “Settings” key using the NISSAN con- troller. The display mode can be set to Normal, Wide or Cinema. The volume setting can be set to Low , Medium or High.
CAUTION ● Only operate the DVD while the vehicle engine is running. Operating the DVD for extended periods of time with the engine OFF can discharge the vehicle battery. ● Do not allow the system to get wet. Excessive moisture such as spilled liq- uids may cause the system to malfunction.
NEXT/PREVIOUS CHAPTER: Select the key to skip the chapter(s) of the disc forward. Select the key to skip the chapter(s) of the disc backward. The chapters will advance forward or backward the number of times the respective key is touched or selected with the NISSAN controller.
● CM Skip (DVD-VIDEO) Select the “CM Skip” key to choose the setting time for CM backward and forward operations. Use the “+” or “-” key to choose a setting time of 15, 30 or 60 seconds.
CAUTION ● Do not force the USB device into the USB port. Inserting the USB device tilted or up-side-down into the port may damage the port. Make sure that the USB device is connected correctly into the USB port. ● Do not grab the USB port cover (if so equipped) when pulling the USB device out of the port.
USB INTERF ACE (models with Navigation System) Connecting a device to the USB input jack WARNING Do not connect/disconnect or operate the USB device while driving. Doing so can be a distraction. If distracted you could lose control of your vehicle and cause an acci- dent or serious injury.
Audio file operation DISC•AUX button: Place the ignition switch in the ON or ACC position and press the DISC•AUX button to switch to the USB input mode. If another audio source is playing and a USB memory device is inserted, press the DISC•AUX button repeatedly until the center display changes to the USB memory mode.
● Folder List/T rack List Displays the folder or track list. The “Movie Playback” key is also displayed in this list screen and enables you to switch to the movie playback mode. ● Play Mode Choose the preferred play mode using the NISSAN controller or the touchscreen.
● Previous Chapter/Rewind: Select the key to skip the chapter(s) of the disc backward. The chapters will go back the number of times the key is selected. Press and hold the key to rewind the chap- ter. List : Select the “List” key on the movie file operation screen to display the file list.
iP od®* PLA YER OPERA TION WITHOUT NA VIGA TION S Y STEM (if so equipped) Connecting iP od® WARNING Do not connect/disconnect or operate the USB device while driving. Doing so can be a distraction. If distracted you could lose control of your vehicle and cause an acci- dent or serious injury.
Audio main operation Place the ignition switch in the ACC or ON position. Press the AUX button repeatedly to switch to the iP od® mode. If the system has been turned off while the iP od® was playing, pressing the VOL/ON·OFF control knob will start the iP od®.
● Albums ● Artists ● Genres ● Composers ● Audiobooks The following keys shown on the screen are also available: ● MENU: returns to the previous screen. ● : plays/pauses the music selected. SEEK/CA T and TRACK buttons: When the SEEK/CA T button or TRACK button is pressed for less than 1.
While connected to the vehicle, the iP od® can only be operated by the vehicle audio controls. T o disconnect the iPod® from the vehicle, re- move the USB end of the cable from the USB jack on the vehicle, then remove the cable from the iP od®. * iP od® is a trademark of Apple Inc.
Interface: The interface for iP od® operation shown on the vehicle center display is similar to the iP od® interface. Use the NISSAN controller and the BACK button to play the iP od® with your favorite settings. The touchscreen can also be used to control your favorite settings.
When the SEEK/CA T button or TRACK button is pressed for more than 1.5 sec- onds while the iP od® is playing, the iPod® will play while fast forwarding or rewinding. When the button is released, the iP od® will return to the normal play speed. The NISSAN controller can also be used to se- lect tracks when the iP od® is playing.
Connecting Bluetooth® audio T o connect your Bluetooth® audio device to the vehicle, follow the procedure below: 1. Press the SETTING button on the control panel.
Audio main operation T o switch to the Bluetooth® audio mode, press the DISC•AUX button repeatedly until the Bluetooth® audio mode is displayed on the screen. The controls for the Bluetooth® audio are dis- played on the screen. Bluetooth® audio settings T o adjust the Bluetooth® audio settings, follow the procedure below: 1.
5. A list of the connected Bluetooth® audio players is displayed. Select the name of the device you wish to edit. 6. The Device Name and Device Address are displayed on the screen. Select the “Select” key to make this device the active Bluetooth® audio player.
● A new disc may be rough on the inner and outer edges. Remove the rough edges by rubbing the inner and outer edges with the side of a pen or pencil as illustrated. 1. P ower on and SOURCE select switch 2. T uning switch 3. V olume control switch 1.
SOURCE select switch Push the source select switch to change the mode in the following sequence: Models without Navigation System: AM → FM1 → FM2 → XM1 → XM2 → XM3 (satellite radio, if so equipped) → USB/iP od®* (if so equipped) → CD/DVD* → AUX* → AM.
AUX: ● Press the ENTER button to show the AUX Menu. ANTENNA Window antenna The antenna pattern is printed inside the rear window . CAUTION ● Do not place metalized film near the rear window glass or attach any metal parts to it. This may cause poor recep- tion or noise.
WARNING ● Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation.
phone module when the ignition switch is placed in the ON position with the previously connected cellular phone turned on and carried in the ve- hicle. Y ou can connect up to 5 different Bluetooth® cellular phones to the in-vehicle phone module. However, you can talk on only one cellular phone at a time.
IC Regulatory information – Operation is subject to the following two con- ditions: (1) this device may not cause interfer- ence, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
● Y ou can cancel a command when the sys- tem is waiting for a response by saying, “Cancel” or “Quit.” The system announces “Cancel” and ends the VR session. Y ou can also press and hold the button on the steering wheel for 5 seconds at any time to end the VR session.
CONTROL BUTT ONS The control buttons for the Bluetooth® Hands-Free Phone System are located on the steering wheel. PHONE/SEND Press the button to initiate a VR session or answer an incoming call. Y ou can also use the button to interrupt the system feedback and give a command at once.
Connecting procedure NO TE: The connecting procedure must be per- formed when the vehicle is stationary. If the vehicle starts moving during the procedure, the procedure will be cancelled. Main Menu “Connect phone” 䊊 A “ Add phone” 䊊 B Initiate from handset 䊊 C Name phone 䊊 D 1.
Receiving a call When you hear the ring tone, press the button on the steering wheel. Once the call has ended, press the button on the steering wheel. NO TE: If you do not wish to take the call when you hear the ring tone, press the button on the steering wheel.
“Redial” 䊊 D Use the Redial command to call the last number that was dialed. The system acknowledges the command, re- peats the number and begins dialing. If a redial number does not exist, the system announces, “There is no number to redial” and ends the VR session.
For phones that do not support automatic down- load of the phonebook (PBAP Bluetooth® pro- file) , the “Phonebook” command is used to manu- ally add entries to the vehicle phonebook. The phonebook stores up to 40 names for each phone connected to the system.
For phones that support automatic download of the phonebook (PBAP Bluetooth® profile) , the “Phonebook” command is used to manage en- tries in the vehicle phonebook. Y ou can say the name of an entry at this menu to initiate dialing of that entry .
“Connect Phone” NO TE: The Add Phone command is not available when the vehicle is moving. Main Menu “Connect Phone” “ Add Phone” 䊊 A “Select Phone” 䊊 B “Delete Phone” 䊊 C “.
10. The system will announce that voice adap- tation has been completed and the system is ready . The V A mode will stop if: ● The button is pressed for more than 5 seconds in V A mode. ● The vehicle begins moving during V A mode. ● The ignition switch is placed in the OFF or L OCK position.
Operating tips ● T o enter manual control mode, start the voice recognition system and tilt the tuning ( ) switch up or down. The system will speak ⬙ Showing Manual Options ⬙ when manual controls are initially activated. ● T o browse the menu options, tilt the tuning ( ) switch up or down.
TROUBLESHOO TING GUIDE The system should respond correctly to all voice commands without difficulty . If problems are en- countered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved.
WARNING ● Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation.
phone module when the ignition switch is placed in the ON position with the connected cellular phone turned on and carried in the vehicle. Y ou can register up to 5 different Bluetooth® cellular phones to the in-vehicle phone module. However, you can talk on only one cellular phone at a time.
REGULA T ORY INFORMA TION FCC Regulatory information – CAUTION: T o maintain compliance with FCC’s RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regula- tions.
CONNECTING PROCEDURE T o connect a Bluetooth® device, use one of the following methods: ● Press the “Phone” button on the control panel or the button on the steering wheel, then select the “Connect Phone” key on the display . ● Press the SETTING button on the control panel, then select the “Bluetooth” key on the display .
VEHICLE PHONEBOOK This vehicle has two phonebooks available for your use. Depending on your phone, the system may automatically download your entire cell phone’s phonebook into the “Handset Phone- book” . For the details on downloading your phonebook, see “Handset Phonebook” , in this section.
Press the button on the steering wheel or the “Phone” button on the control panel and then select the ⬙ V ehicle Phonebook ⬙ key . Next, select the desired entry from the displayed list.
HANDSET PHONEBOOK Many phones will support an automatic down- load of the cellular phone’s phonebook. Since this method allows for up to 1000 numbers to be stored and entries are automatically assigned voice tags by the system, this is a useful function for easy dialing supported by the V oice Recogni- tion system.
MAKING A CALL Press the button on the steering wheel or the “Phone” button on the control panel. The ⬙ Phone ⬙ screen will appear on the display . Select one of the following options to make a call: Menu Item Result V ehicle Phonebook Select the name from an entry stored in the vehicle phonebook.
RECEIVING A CALL When you hear a phone ring, the display will change to phone mode. T o receive a call, follow one of the procedures listed below: Menu Item Result Press the button on the steering whe.
DURING A CALL There are some options available during a call. Select one of the following displayed on the screen, if necessary: Menu Item Result Hang Up Finish the call. If pressed while another caller is on hold, current call will be ended and user will be able to speak to the caller that was previously on hold.
PHONE SETTINGS T o set up the Bluetooth Hands-Free Phone Sys- tem to your perferred settings, press the SET - TING button on the control panel and select the ⬙ Phone ⬙ key on the display . Menu Item Result Edit V ehicle Phonebook See ⬙ V ehicle Phonebook ⬙ in this section for adding, editing, and deleting contacts in the vehicle phonebook.
BLUET OO TH SETTINGS T o set up the Bluetooth Hands-Free Phone Sys- tem to your preferred settings, press the SET - TING button on the control panel and select the ⬙ Bluetooth ⬙ key on the display . Menu Item Result Bluetooth T urn the Bluetooth system on or off.
CALL VOLUME Adjusting the incoming or outgoing call volume may improve clarity if reception between callers is unclear. T o access the volume settings, press the SETTING button, then select ”V olume and Beeps” .
NISSAN V oice Recognition allows hands-free operation of the systems equipped on this ve- hicle, such as phone and vehicle information. There are two voice recognition modes of opera- tion available.
Menu Item Result Getting Started The following message will appear: ⬙ With voice recognition, you can use voice commands to control navigation, audio, phone, and other functions.
USING THE S Y STEM Initialization When the ignition switch is placed in the ON position, NISSAN V oice Recognition is initialized, which takes a few seconds. When completed, the system is ready to accept voice commands. If the switch is pressed before the initializa- tion completes, voice commands will not be ac- cepted.
Operating tips ● Say a command after the tone. V oice com- mands cannot be accepted when the icon is . ● Commands that are available are always shown on the display and spoken through voice menu prompts. Commands other than those that are displayed are not accepted.
Standard Mode command list Category Commands: COMMAND ACTION Phone Displays Phone function commands. Navigation Displays Navigation function commands. Information Displays Vehicle Information. Audio Displays Audio commands. Help Displays User Guide. Phone Commands: COMMAND ACTION Dial Number Makes a call to a spoken phone number up to 10 digits.
V ehicle Information Commands: COMMAND ACTION Fuel Economy Displays Fuel Economy information. Maintenance Displays Maintenance information. T raffic Information T urns the traffic information system on and off. Where am I? Displays current vehicle location.
V oice command examples Some basic voice command examples are de- scribed here. For navigation system commands, see the sepa- rate Navigation System Owner’s Manual. Example 1 — Placing a call to the phone number 800-662-6200: 1. Press the button located on the steer- ing wheel.
● Do not add a “1” in front of the area code when speaking phone numbers. ● If the system does not recognize your com- mand, please try repeating the command using a natural voice. Speaking too slowly or too loudly may further decrease recognition performance.
Please note that in this mode the recognition success rate may be affected as the number of available commands and ways of speaking each command are increased. Y ou can turn this mode ON or OFF . When this mode is activated, the V oice Recognition Settings will change to show more options.
Alternate Command Mode command list Phone Commands: COMMAND ACTION Dial Number Makes a call to a spoken phone number up to 10 digits. V ehicle Phonebook Makes a call to a contact in the vehicle phonebook. Handset Phonebook Makes a call to a contact in the handset phonebook.
COMMAND ACTION Birdview Map Changes the Map display to Birdview. Planview Map Changes the Map display to a 2-dimensional view. North Up Changes the Map display to keep north pointing up on the screen. Heading Up Changes the Map display to keep the direction of the vehicle pointing up on the screen.
Displaying user guide Y ou can confirm how to use voice commands by accessing a simplified User Guide, which con- tains basic instructions and tutorials for several voice commands. 1. Press the INFO button on the control panel. 2. Select the “V oice Recognition” key .
USING THE S Y STEM Initialization When the ignition switch is placed in the ON position, NISSAN V oice Recognition is initialized, which takes a few seconds. When completed, the system is ready to accept voice commands. If the switch is pressed before the initializa- tion completes, the display will show the mes- sage: “System not ready .
Operating tips ● Say a command after the tone. V oice com- mands cannot be accepted when the icon is . ● If the command is not recognized, the sys- tem repeats the announcement. Repeat the command in a clear voice. ● Say “Back” when prompted to return to the previous screen.
V oice recognition settings The available settings for the NISSAN V oice Rec- ognition system, while in Alternate Command Mode, are described. 1. Press the SETTING button on the control panel 2. Select ”Others” key 3. Select the “V oice Recognition” key Y ou can confirm the page by scrolling the screen using the NISSAN controller.
SPEAKER ADAPT A TION FUNCTION The V oice Recognition system has a function to learn the user’s voice for better voice recognition performance. The system can memorize the voices of up to three persons. Having the system learn the user’s voice 1. Press the SETTING button on the control panel 2.
Speaker Adaptation function settings T o access the speaker adaptation function set- tings: 1. Press the SETTING button on the control panel. 2. Select the “Others” key . 3. Select the “V oice Recognition” key . 4. Select the “Speaker Adaptation” key .
TROUBLESHOO TING GUIDE The system should respond correctly to all voice commands without difficulty . If problems are en- countered, follow the solutions given in this guide for the appropriate error. Where the solutions are listed by number, try each solution in turn, starting with number one, until the problem is resolved.
5 Starting and driving Precautions when starting and driving ................5 - 2 Exhaust gas (carbon monoxide) ..................5 - 2 Three-way catalyst ..............................5 - 2 Tire Pressure Monitoring System (TPMS) ..........5 - 3 Avoiding collision and rollover .
WARNING ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle.
CAUTION ● Do not use leaded gasoline. Deposits from leaded gasoline will seriously re- duce the three-way catalyst’s ability to help reduce exhaust pollutants. ● Keep your engine tuned up. Malfunc- tions in the ignition, fuel injection, or electrical systems can cause overrich fuel flow into the three-way catalyst, causing it to overheat.
Additional information: ● The TPMS does not monitor the tire pressure of the spare tire. ● The TPMS will activate only when the vehicle is driven at speeds above 16 MPH (25 km/h). Also, this system may not detect a sudden drop in tire pressure (for example a flat tire while driving) .
● Replacing tires with those not originally specified by NISSAN could affect the proper operation of the TPMS. ● Do not inject any tire liquid or aerosol tire sealant into the tires, as this may cause a malfunction of the tire pressure sensors. CAUTION Do not place metalized film or any metal parts (antenna, etc .
OFF-ROAD RECOVER Y If the right side or left side wheels unintentionally leave the road surface, maintain control of the vehicle by following the procedure below . Please note that this procedure is only a general guide. The vehicle must be driven as appropriate based on the conditions of the vehicle, road and traffic.
DRINKING AL COHOL/DRUGS AND DRIVING WARNING Never drive under the influence of alcohol or drugs. Alcohol in the bloodstream re- duces coordination, delays reaction time and impairs judgement. Driving after drinking alcohol increases the likelihood of being involved in an accident injuring yourself and others.
The ignition lock is designed so that the ignition switch position cannot be switched to OFF until the shift lever is moved to the P (Park) position. When the ignition switch cannot be pushed to- ward the OFF position, proceed as follows: 1. Move the shift lever into the P (Park) posi- tion.
OFF: The ignition switch is in the OFF position when the engine is turned off using the ignition switch. No lights will illuminate on the ignition switch. ACC (Accessories) : This position activates electrical accessories, such as the radio, when the engine is not running.
T o remove the Intelligent Key from the port, push the ignition switch to the L OCK position and pull the Intelligent K ey out of the port 䊊 C . NO TE: The Intelligent Key port does not charge the Intelligent Key battery. If you see the low battery indicator, replace the battery as soon as possible.
● Make sure the area around the vehicle is clear. ● Check fluid levels such as engine oil, cool- ant, brake fluid, and window washer fluid as frequently as possible, or at least whenever you refuel. ● Check that all windows and lights are clean.
NO TE: Care should be taken to avoid situations that can lead to potential battery discharge and potential no-start conditions such as: 1. Installation or extended use of electronic accessories that consume battery power when the engine is not running (Phone char- gers, GPS, DVD players, etc.
CAUTION When stopping the vehicle on an uphill grade, do not hold the vehicle by depress- ing the accelerator pedal. The foot brake should be used for this purpose. The CVT in your vehicle is electronically con- trolled to produce maximum power and smooth operation.
4. Stop the vehicle completely before shifting the shift lever to the P (Park) position. The CVT is designed so the foot brake pedal MUST be depressed before shifting from P (Park) to any drive position while the ignition switch is in the ON position.
R (Reverse) : CAUTION T o prevent transmission damage, use the P (Park) or R (Reverse) position only when the vehicle is completely stopped. Use the R (Reverse) position to back up. Make sure the vehicle is completely stopped before selecting the R (Reverse) position.
When the shift lever is shifted from D (Drive) to the manual shift gate 䊊 A with the vehicle stopped or while driving, the transmission enters the manual shift mode. Shift ranges can be selected manually . Shift ranges can also be selected using the shift paddles (if so equipped) on the steering wheel 䊊 B and 䊊 C .
● CVT operation is limited to automatic drive mode when CVT fluid temperature is ex- tremely low even if manual shift mode is selected. This is not a malfunction. When CVT fluid warms up, manual mode can be selected. ● When the CVT fluid temperature is high, the shift range may upshift in lower rpm than usual.
Accelerator downshift — in D (Drive) position and manual shift mode For passing or hill climbing, depress the accel- erator pedal to the floor. This shifts the transmis- sion down into lower range, depending on the vehicle speed. High fluid temperature protection mode This transmission has a high fluid temperature protection mode.
T o engage: Firmly depress the parking brake. T o release: 1. Firmly apply the foot brake. 2. Move the shift lever to the P (Park) position. 3. Firmly depress the parking brake pedal and it will release. 4. Before driving, be sure the brake warning light goes out.
T o set cruising speed, accelerate the vehicle to the desired speed, push the COAST/SET switch and release it. T ake your foot off the accelerator pedal. Y our vehicle maintains the set speed. ● T o pass another vehicle, depress the ac- celerator pedal.
CAUTION During the first 1,200 miles (2,000 km), follow these recommendations to obtain maximum engine performance and ensure the future reliability and economy of your new vehicle. Failure to follow these rec- ommendations may result in shortened engine life and reduced engine performance.
6. Plan for the Shortest Route ● Utilize a map or navigation system to de- termine the best route to save time 7. Avoid Idling ● Shutting off your engine when safe for stops exceeding 30–60 seconds saves fuel and reduces emissions 8.
WARNING ● Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. ● Safe parking procedures require that both the parking brake be set and the transmission placed into P (Park) .
The power assisted steering uses a hydraulic pump, driven by the engine, to assist steering. If the engine stops or the drive belt breaks, you will still have control of the vehicle. However, much greater steering effort is needed, especially in sharp turns and at low speeds.
This procedure is described in the vehicle service manual and can be performed by a NISSAN dealer. ANTI-L OCK BRAKING S Y STEM (ABS) WARNING ● The Anti-lock Braking System (ABS) is a sophisticated device, but it cannot pre- vent accidents resulting from careless or dangerous driving techniques.
When the ABS senses that 1 or more wheels are close to locking up, the actuator rapidly applies and releases hydraulic pressure. This action is similar to pumping the brakes very quickly . Y ou may feel a pulsation in the brake pedal and hear a noise from under the hood or feel a vibration from the actuator when it is operating.
The VDC system is automatically reset to on when the ignition switch is placed in the off position then back to the on position. The computer has a built in diagnostic feature that tests the system each time you start the engine and move the vehicle forward or in reverse at a slow speed.
FREEING A FROZEN DOOR L OCK T o prevent a door lock from freezing, apply de- icer through the key hole. If the lock becomes frozen, heat the key before inserting it into the key hole or use the remote keyless entry function on the Intelligent K ey.
● Whatever the condition, drive with cau- tion. Accelerate and slow down with care. If accelerating or downshifting too fast, the drive wheels will lose even more traction. ● Allow more stopping distance under these conditions. Braking should be started sooner than on dry pavement.
MEMO 5-30 Starting and driving.
6 In case of emergency Emergency engine shut off .........................6 - 2 Hazard warning flasher switch ......................6 - 2 Flat tire ...........................................6 - 3 Tire Pressure Monitoring System (TPMS) ..........6 - 3 Changing a flat tire .
T o shut off the engine in an emergency situation while driving, perform the following procedure: – Rapidly push the push-button ignition switch 3 consecutive times in less than 1.5 seconds, or – Push and hold the push-button ignition switch for more than 2 seconds.
TIRE PRESSURE MONIT ORING S Y STEM (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pres- sure of all tires except the spare.
WARNING ● Make sure the parking brake is securely applied and the CVT is shifted into P (Park) . ● Never change tires when the vehicle is on a slope, ice or slippery areas. This is hazardous. ● Never change tires if oncoming traffic is close to your vehicle.
Remove the jack 䊊 1 and wheel nut wrench 䊊 2 from the tool box on the right side of the trunk compartment. Remove the spare tire. Jacking up vehicle and removing the damaged tire WARNING ● Never get under the vehicle while it is supported only by the jack.
● Use the correct jack -up points. Never use any other part of the vehicle for jack support. ● Never jack up the vehicle more than necessary. ● Never use blocks on or under the jack. ● Do not start or run the engine while vehicle is on the jack.
Installing the spare tire The spare tire is designed for emergency use. See specific instructions under the heading “ Wheels and tires” in the “Mainte- nance and do-it-yourself” section of this manual. 1. Clean any mud or dirt from the surface be- tween the wheel and hub.
T o start your engine with a booster battery, the instructions and precautions below must be fol- lowed. WARNING ● If done incorrectly, jump starting can lead to a battery explosion, resulting in severe injury or death. It could also damage your vehicle.
WARNING Always follow the instructions below. Fail- ure to do so could result in damage to the charging system and cause personal injury. 1. If the booster battery is in another vehicle, position the two vehicles to bring their bat- teries near each other.
CAUTION ● CVT models cannot be push-started or tow-started. Attempting to do so may cause transmission damage. ● Do not push start this vehicle. The three-way catalyst may be damaged. If your vehicle is overheating (indicated by an extremely high temperature gauge reading) or if you feel a lack of engine power, detect abnormal noise, etc.
When towing your vehicle, all State (Provincial in Canada) and local regulations for towing must be followed. Incorrect towing equipment could dam- age your vehicle. T owing instructions are avail- able from a NISSAN dealer. Local service opera- tors are generally familiar with the applicable laws and procedures for towing.
CAUTION ● Never tow CVT models with the front wheels on the ground or four wheels on the ground (forward or backward) , as this may cause serious and expensive damage to the transmission. If it is nec- essary to tow the vehicle with the rear wheels raised always use towing dollies under the front wheels.
● Do not use the vehicle tie-downs to tow or free a stuck vehicle. ● Only use devices specifically designed for vehicle recovery and follow the manufacturer’s instructions. ● Always pull the recovery device straight out from the front of the vehicle.
MEMO 6-14 In case of emergency.
7 Appearance and care Cleaning exterior ..................................7 - 2 W ashing ......................................7 - 2 W axing ........................................7 - 2 Removing spots ................................7 - 3 Underbody .
In order to maintain the appearance of your ve- hicle, it is important to take proper care of it. T o protect the paint surfaces, please wash your vehicle as soon as you can: ● after a rainfall to prevent possible damage from acid rain. ● after driving on coastal roads.
REMOVING SPO TS Remove tar and oil spots, industrial dust, insects, and tree sap as quickly as possible from the surface of the paint to avoid lasting damage or staining. Special cleaning products are available at a NISSAN dealer or any automotive accessory store.
● Do not apply wheel cleaners to the wheels when they are hot. The wheel temperature should be the same as am- bient temperature. ● Rinse the wheel to completely remove the cleaner within 15 minutes after the cleaner is applied. CHROME P ARTS Clean all chrome parts regularly with a non- abrasive chrome polish to maintain the finish.
CAUTION ● Never use benzine, thinner or any simi- lar material. ● Small dirt particles can be abrasive and damaging to leather surfaces and should be removed promptly. Do not use saddle soap, car waxes, polishes, oils, cleaning fluids, solvents, deter- gents or ammonia-based cleaners as they may damage the leather’s natural finish.
SEA T BEL TS The seat belts can be cleaned by wiping them with a sponge dampened in a mild soap solution. Allow the belts to dry completely in the shade before using them. See “Seat belt maintenance” in the “Safety – Seats, seat belts and supplemen- tal restraint system” section of this manual.
CAUTION ● NEVER remove dirt, sand or other de- bris from the passenger compartment by washing it out with a hose. Remove dirt with a vacuum cleaner or broom. ● Never allow water or other liquids to come in contact with electronic compo- nents inside the vehicle as this may damage them.
MEMO 7-8 Appearance and care.
8 Maintenance and do-it-yourself Maintenance requirements ..........................8 - 2 General maintenance ..............................8 - 2 Explanation of general maintenance items .........8 - 2 Maintenance precautions .........................
Y our NISSAN has been designed to have mini- mum maintenance requirements with long ser- vice intervals to save you both time and money . However, some day-to-day and regular mainte- nance is essential to maintain your NISSAN’s good mechanical condition, as well as its emis- sions and engine performance.
When driving in areas using road salt or other corrosive materials, check lubrication frequently . Lights* Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely .
Seat belts Check that all parts of the seat belt system (for example, buckles, anchors, adjusters and retractors) operate properly and smoothly , and are installed securely .
Underbody The underbody is frequently ex- posed to corrosive substances such as those used on icy roads or to control dust. It is very important to remove these substances from the underbody , otherwise rust may form on the floor pan, frame, fuel lines and exhaust system.
CAUTION ● Do not work under the hood while the engine is hot. T urn the engine off and wait until it cools down. ● Avoid contact with used engine oil and coolant. Improperly disposed engine oil, engine coolant and/or other vehicle fluids can damage the environment.
1. P ower steering fluid reservoir 2. Engine oil filler cap 3. Brake fluid reservoir 4. Air cleaner 5. Fuse block/ Fusible links 6. Battery 7. Fusible links 8. Engine oil dipstick 9. Radiator cap 10. Drive belt location 11. Engine coolant reservoir 12.
The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and 50% water to provide year-round anti-freeze and coolant protection. The antifreeze solution con- tains rust and corrosion inhibitors.
CHECKING ENGINE COOLANT LEVEL Check the coolant level in the reservoir when the engine is cold. If the coolant level is below the MIN level 䊊 B , add coolant to the MAX level 䊊 A . If the reservoir is empty , check the coolant level in the radiator when the engine is cold.
CHECKING ENGINE OIL LEVEL 1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature. 3. T urn off the engine. Wait more than 10 minutes for the oil to drain back into the oil pan.
CHANGING ENGINE OIL 1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature. 3. T urn the engine off and wait more than 10 minutes. 4. Place a large drain pan under the drain plug 䊊 A (under the body) .
CHANGING ENGINE OIL FIL TER 1. Park the vehicle on a level surface and apply the parking brake. 2. T urn the engine off. 3. Place a large drain pan under the oil filter 䊊 A . 4. Loosen the oil filter 䊊 A with an oil filter wrench by turning it counterclockwise.
The fluid level should be checked using the HO T MAX range on the power steering fluid reservoir at fluid temperatures of 122° - 176°F (50° - 80°C) or using the COLD MAX range on the power steering fluid reservoir at fluid tempera- tures of 32° - 86°F (0° - 30°C) .
BRAKE FLUID Check the brake fluid level in the reservoir. If the fluid level is below the MIN line or the brake warning light comes on, add Genuine NISSAN Super Heavy Duty Brake Fluid or equivalent DO T 3 fluid up to the MAX line. If fluid must be added frequently , the system should be checked by a NISSAN dealer.
● K eep the battery surface clean and dry. Clean the battery with a solution of baking soda and water. ● Make certain the terminal connections are clean and securely tightened. ● If the vehicle is not to be used for 30 days or longer, disconnect the negative (-) battery terminal cable to prevent discharge.
1. Remove the vent caps with a screwdriver as shown. Use a cloth to protect the battery case. 2. Check the fluid level in each cell. If it is necessary to add fluid, add only distilled water to bring the level up to the bottom of the filler opening. Do not overfill.
CAUTION ● Do not ground accessories directly to the battery terminal. Doing so will by- pass the variable voltage control sys- tem and the vehicle battery may not charge completely. ● Use electrical accessories with the en- gine running to avoid discharging the vehicle battery.
2. Have the belt checked regularly for condi- tion and tension in accordance with the maintenance schedule found in the “NISSAN Service and Maintenance Guide” .
The air cleaner filter should not be cleaned and reused. Replace it according to the maintenance log shown in the “NISSAN Service and Mainte- nance Guide.” When replacing the filter, wipe the inside of the air cleaner filter housing and the cover with a damp cloth.
CLEANING If your windshield is not clear after using the windshield-washer or if a wiper blade chatters when running, wax or other material may be on the blade or windshield. Clean the outside of the windshield with a washer solution or a mild detergent.
Be careful not to let anything get into the washer nozzle 䊊 A . This may cause clogging or improper windshield washer operation. If something gets into the nozzle, remove it with a needle or small pin 䊊 B . If the brakes do not operate properly , have the brakes checked by a NISSAN dealer.
T wo types of fuses are used. T ype 䊊 A is used in the fuse boxes in the engine compartment. T ype 䊊 B is used in the passenger compartment fuse box. T ype A fuses are provided as spare fuses. They are stored in the passenger compartment fuse box.
If any electrical equipment does not come on, check for an open fuse. 1. Be sure the ignition switch and the headlight switch are OFF . 2. Open the engine hood. 3. Remove the fuse box cover by pushing the tab and lifting the cover up. 4. Remove the fuse with the fuse puller.
Fusible links If the electrical equipment does not operate and fuses are in good condition, check the fusible links. If any of these fusible links are melted, replace with only Genuine NISSAN parts. P ASSENGER COMP ARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than specified on the fuse box cover.
Extended storage switch If any electrical equipment does not operate, remove the extended storage switch and check for an open fuse. NO TE: The extended storage switch is used for long term vehicle storage. Even if the ex - tended storage switch is broken it is not necessary to replace it.
CAUTION Be careful not to allow children to swallow the battery or removed parts. NISSAN INTELLIGENT KEY® Replace the battery in the Intelligent K ey as fol- lows: 1.
or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. For Canada: This device complies with RSS-210 of In- dustry Canada.
FRONT P ARK/TURN/SIDEMARKER LIGHT Bulb replacement requires the removal of the headlight assembly . If replacement is required, see your NISSAN dealer. FOG LIGHTS (if so equipped) Replacing the fog light bulb If replacement is required, see your NISSAN dealer.
1. Headlight assembly 2. Map light 3. Rear personal lights 4. Door mirror turn signal light (if so equipped) 5. Step light 6. Fog light (if so equipped) 7. High-mounted stop light (T ype A) 8. T runk light 9. High-mounted stop light (T ype B) 10. License plate light 11.
Replacement procedures All other lights are either type A , B, C or D. When replacing a bulb, first remove the lens, lamp and/or cover. Indicates bulb removal Indicates bulb installation Use a cloth 䊊 1 to protect the housing. Use a cloth 䊊 1 to protect the housing.
Use a cloth 䊊 1 to protect the housing. Use a cloth 䊊 1 to protect the housing. Step light LDI0341 Personal light WDI0670 T runk light LDI2135 Maintenance and do-it-yourself 8-31.
If you have a flat tire, see “Flat tire” in the “In case of emergency” section of this manual. TIRE PRESSURE Tire Pressure Monitoring System (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pressure of all tires except the spare.
Incorrect tire pressure, including un- der inflation, may adversely affect tire life and vehicle handling. WARNING ● Improperly inflated tires can fail suddenly and cause an accident. ● The Gross V ehicle Weight Rating (GVWR) is located on the F .
Tire and loading information label 䊊 1 Seating capacity: The maximum num- ber of occupants that can be seated in the vehicle. 䊊 2 V ehicle load limit: See loading infor- mation in the “T echnical and con- sumer information” section. 䊊 3 Original tire size: The size of the tires originally installed on the vehicle at the factory .
Checking tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem side- ways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage.
Size Cold Tire Inflation Pres- sure Front Original Tire P245/45VR18 230 kPa, 33 PSI P245/40VR19 230 kPa, 33 PSI 245/40WR19 230 kPa, 33 PSI Rear Original Tire P245/45VR18 230 kPa, 33 PSI P245/40VR19 23.
䊊 1 Tire size (example: P215/65R15 95H) 1. P: The “P” indicates the tire is de- signed for passenger vehicles (not all tires have this information) . 2. Three-digit number (215): This num- ber gives the width in millimeters of the tire from sidewall edge to side- wall edge.
䊊 2 TIN (Tire Identification Number) for a new tire (example: DO T XX XX XXX XXXX) 1. DO T : Abbreviation for the “Depart- ment Of T ransportation” . The symbol can be placed above, below or to the left or right of the Tire Identification Number.
䊊 7 The word “radial” The word “radial” is shown if the tire has radial structure. 䊊 8 Manufacturer or brand name Manufacturer or brand name is shown.
For additional traction on icy roads, studded tires may be used. However, some U.S. states and Canadian provinces prohibit their use. Check local, state and provincial laws before installing studded tires. Skid and traction capabilities of studded snow tires on wet or dry surfaces may be poorer than that of non-studded snow tires.
Wheel nut tightening torque: 83 ft-lb (112 N·m) The wheel nuts must be kept tight- ened to specifications at all times. It is recommended that wheel nuts be tightened to specification at each tire rotation interval. WARNING ● After rotating the tires, check and adjust the tire pressure.
Replacing wheels and tires When replacing a tire, use the same size, tread design, speed rating and load carrying capacity as originally equipped. Recommended types and sizes are shown in “Wheels and tires” in the “T echnical and consumer information” section of this manual.
Care of wheels ● W ash the wheels when washing the vehicle to maintain their appearance. ● Clean the inner side of the wheels when the wheel is changed or the underside of the vehicle is washed. ● Do not use abrasive cleaners when washing the wheels.
MEMO 8-44 Maintenance and do-it-yourself.
9 T echnical and consumer information Capacities and recommended fuel/lubricants .........9 - 2 Fuel Recommendation ..........................9 - 3 Engine oil and oil filter recommendations ..........9 - 5 Air conditioner system refrigerant and oil recommendations .
The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedure described in the “Maintenance and do-it-yourself” section to determine the proper refill capacity. Capacity (Approximate) Recommended Fluids and Lubricants US measure Imp measure Liter Fuel 20 gal 16-5/8 gal 75.
FUEL RECOMMENDA TION NISSAN recommends the use of unleaded pre- mium gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Research octane number 96) .
● If a methanol blend is used, it should contain no more than 5% methanol (methyl alcohol, wood alcohol) . It should also contain a suitable amount of appropriate cosolvents and corro- sion inhibitors.
ENGINE OIL AND OIL FIL TER RECOMMENDA TIONS Selecting the correct oil It is essential to choose the correct grade, quality and viscosity engine oil to ensure satisfactory engine life and performance. See “Capacities and recommended fuel/lubricants” earlier in this section.
Y our engine was filled with a high-quality engine oil when it was built. Y ou do not have to change the oil before the first recommended change interval.
ENGINE Model VQ35DE T ype Gasoline, 4-cycle, DOHC Cylinder arrangement 6-cylinder, V-block, Slanted at 60° Bore x Stroke in (mm) 3.760 x 3.205 (95.5 x 81.4) Displacement cu in (cm 3 ) 213.45 (3,498) Firing order 1–2–3–4–5–6 Idle speed No adjustment is necessary.
WHEELS AND TIRES Wheels Size Offset in (mm) 18 x 8.0JJ 1.97 (50) 19 x 8.0JJ 1.97 (50) Tires P245/45VR18 P245/40VR19 245/40WR19 Spare tire T145/80D17 Speed rating 18” V 19” V 19” W DIMENSIONS AND WEIGHTS Overall length in (mm) 190.6 (4,843) Overall width in (mm) 73.
When planning to drive your NISSAN ve- hicle in another country, you should first find out if the fuel available is suitable for your vehi- cle’s engine. Using fuel with an octane rating that is too low may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline.
ENGINE SERIAL NUMBER The number is stamped on the engine as shown. F .M.V .S.S./C.M.V .S.S. CERTIFICA TION LABEL The Federal/Canadian Motor V ehicle Safety Standard (F .
TIRE AND L OADING INFORMA TION LABEL The cold tire pressure is shown on the Tire and Loading Information label. The label is located as shown. AIR CONDITIONER SPECIFICA TION LABEL The air conditioner specification label is affixed to the underside of the hood as shown.
WARNING ● It is extremely dangerous to ride in a cargo area inside a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed. ● Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.
VEHICLE L OAD CAP ACITY Do not exceed the load limit of your ve- hicle shown as “The combined weight of occupants and cargo” on the Tire and Loading Information label. Do not exceed the number of occupants shown as “Seating Capacity” on the Tire and Load- ing Information label.
Steps for determining correct load limit 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX lbs or XXX kg” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle.
5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be trans- ferred to your vehicle.
WARNING Overloading or improper loading of a trailer and its cargo can adversely affect vehicle handling, braking and perfor- mance and may lead to accidents. CAUTION ● Do not tow a trailer or haul a heavy load for the first 500 miles (800 km) . Y our engine, axle or other parts could be damaged.
T emperature conditions also can affect towing. For example, towing a heavy trailer in high outside temperatures on graded roads can affect engine performance and cause overheating.
Maximum Gross V ehicle Weight (GVW)/maximum Gross Axle W eight (GA W) The GVW of the towing vehicle must not exceed the Gross V ehicle W eight Rating (GVWR) shown on the F .
4,546 lb. (2062 kg) GVWR – 4,446 lb. (2016 kg) GVW = 100 lb. (45 kg) Available for tongue weight 1,000 lb. (454 kg) Capacity available for towing 100 lb.
Ball mount The hitch ball is attached to the ball mount and the ball mount is inserted into the hitch receiver. Choose a proper class ball mount based on the trailer weight. Additionally , the ball mount should be chosen to keep the trailer tongue level with the ground.
T railer lights CAUTION When splicing into the vehicle electrical system, a commercially available power- type module/converter must be used to provide power for all trailer lighting.
● When backing up, hold the bottom of the steering wheel with one hand. Move your hand in the direction in which you want the trailer to go. Make small corrections and back up slowly . If possible, have someone guide you when you are backing up. Always block the wheels on both vehicle and trailer when parking.
2. When the trailer sway stops, gently apply the brakes and pull to the side of the road in a safe area. 3. T ry to rearrange the trailer load so it is bal- anced as described earlier in this section. ● Be careful when passing other vehicles. Passing while towing a trailer requires con- siderably more distance than normal pass- ing.
DO T (Department of T ransportation) Quality Grades: All passenger car tires must conform to federal safety requirements in addition to these grades. Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width.
For USA If you believe that your vehicle has a de- fect which could cause a crash or could cause injury or death, you should immedi- ately inform the National Highway T raffic Safety Administration (NHTSA) in addi- tion to notifying NISSAN.
Due to legal requirements in some states and Canadian Provinces, your vehicle may be re- quired to be in what is called the “ready condi- tion” for an Inspection/Maintenance (I/M) test of the emission control system. The vehicle is set to the “ready condition” when it is driven through certain driving patterns.
Genuine NISSAN Service Manuals for this model year and prior can be purchased. A genuine NISSAN Service Manual is the best source of service and repair information for your vehicle. This manual is the same one used by the factory- trained technicians working at NISSAN dealer- ships.
MEMO 9-28 T echnical and consumer information.
10 Index A Active Head Restraint ........... 1 - 8 , 1 - 1 5 Air bag (See supplemental restraint s y s t e m ) ..................... 1 - 4 3 Air bag system Front (See supplemental front impact air bag system) ............... 1 - 5 0 Air bag warning light .
Child safety rear door lock ............ 3 - 6 Chimes, audible reminders ........... 2 - 1 6 Cleaning exterior and interior ........... 7 - 2 C.M.V .S.S. certification label .......... 9 - 1 0 Cold weather driving ............... 5 - 2 8 Compact disc (CD) player .
Fuel Capacities and recommended fuel/lubricants ................. 9 - 2 Fuel economy ................ 5 - 2 2 Fuel-filler door and cap ........... 3 - 2 1 Fuel gauge ................... 2 - 7 F u e l o c t a n e r a t i n g ............... 9 - 4 Loose fuel cap warning .
License plate Installing the license plate .......... 9 - 1 1 Light Air bag warning light . . . . . . . . .1-57, 2-14 Brake light (See stop light) . . . . . . . . .8-28 Bulb check/instrument panel ........ 2 - 1 0 Bulb replacement .............. 8 - 2 8 Charge warning light .
Precautions on supplemental restraint s y s t e m .................... 1 - 4 3 Precautions when starting and driving .... 5 - 2 Push starting ................... 6 - 1 0 R Radio Car phone or CB radio ........... 4 - 9 1 Compact Disc (CD) changer .....
Rear window and outside mirror defroster s w i t c h ..................... 2 - 2 9 T u r n s i g n a l s w i t c h .............. 2 - 3 4 V ehicle dynamic control (VDC) off s w i t c h ..................... 2 - 3 8 Windshield wiper and washer switch .
When traveling or registering your vehicle in another country .................. 9 - 9 Windows Locking passengers’ windows ....... 2 - 4 5 Power rear windows ............. 2 - 4 5 Power windows ............... 2 - 4 4 Rear power windows ............
RECOMMENDED FUEL: NISSAN recommends the use of unleaded pre- mium gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Research octane number 96) .
® 2014 M AXI M A OWN E R’S MAN UAL For y our s afety , read car efully and keep in this v ehicle. 2014 N IS SAN MAX I MA A35-D Printing : July 2013 (13) Publication No.
デバイスNissan Maxima (2014)の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Nissan Maxima (2014)をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはNissan Maxima (2014)の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Nissan Maxima (2014)の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Nissan Maxima (2014)で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Nissan Maxima (2014)を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はNissan Maxima (2014)の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Nissan Maxima (2014)に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちNissan Maxima (2014)デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
