NissinメーカーDi600の使用説明書/サービス説明書
ページ先へ移動 of 24
for Canon EOS / Nikon digital SLR cameras for Sony digital SLR cameras INSTRUCTION MANUAL.
Thank you for purchasing a Nissin product Before using this flash unit, please read this instruction manual and refer your camera owner’s manual carefully to get a better understanding of the proper operation to enjoy flash photography. Nissin Di600 is designed for digital SLRs cameras with hotshoe and the latest TTL flash control technology.
These safety instructions refer to important information on how to use this product safely and properly . Please read the following instructions before using the product. SAFETY INSTRUCTIONS W ARNING The flash unit contains high voltage electric parts.
S y c n Names of the Components Flash stand Light dif fusing panel / Fill-in reflector Flash head AF-assist light / wireless flash sensor Lock ring Mounting foot Hotshoe contacts X - T erminal Pilot b.
Basic Operation Inserting batteries Open the battery compartment door and insert 4 x size AA batteries as shown by the picture. Make sure the + and - battery contacts are correctly inserted at the battery compartment. Close the battery compartment door and slide it back in place.
NOTE Mounting Di600 on the camera Slide the mounting foot of Di600 into the hotshoe of camera. T wist the lock ring clockwise to tighten it. T wist the lock ring anti-clockwise to loosen it as shown in the picture. Removing Di600 from the camera Loosen the lock ring and slide the mounting foot of Di600 off the hotshoe of camera.
Push the lever of the locking ring (in the direction of the arrow) of Di600 to loosen it as shown in the picture. Slide the mounting foot of Di600 into the hotshoe of the camera while holding down the lock ring. Release the lock ring of Di600 when the mounting foot is fully slide into the hotshoe of the camera.
Turn on the flash unit For a test flash, press the Pilot button. When using the test flash as an open flash, please note that the reference guide number in this case is G.No.10 (ISO 100). T o turn of f the flash unit manually , press the On/Of f switch for 2 seconds.
Shooting Di600 automatically Canon cameras Nikon cameras (Program), (Full Auto), (Aperture priority), (Shutter priority) or (Manual); (Program), (Full Auto), (Aperture priority), (Shutter priority) or (Manual); Set Di600 to the camera’ s hotshoe and turn on the power switch.
Set the camera’ s shooting mode, select focal length and take pictures with Di600 on your camera. Di600 is a supplement to help you in taking a creative and live picture. Almost all tasks are automatically done by the camera and you just control the camera only .
Joy of Flash Photography TTL flash power compensation is provided in 7 steps by half Ev increments for -1.5, -1.0, -0.5, 0, +0.5, +1.0, and +1.5 Ev . T o set the Flash power level select button to the power level you desire.
Fill-in flash and Light diffusing panel For short distance or portrait flash photography , if the light is not too sharp or too strong to the subject. Use fill-in reflector flash or dif fuse the light. If the subject is close (within 2 meters), turn the flash head 90° upward and pull out the fill-in reflector as shown in the picture.
Bounce lighting When lighting a subject in front of the wall, an unnecessary sharp shadow may appear on the wall behind the subject resulting in a disappointing picture. Bounce the light of f the ceiling or wall to soften the light on the subject, and the shadow will fade.
Focus the subject. Pre-flash is fired to pre-set the correct light amount for the main subject. Remarks: FEL only works on P , TV , A V , M & A-Dep mode. Set the picture frame as you desire and release the shutter . Remarks: AE-L only works on P , S, A & M mode.
Following functions are available on Nikon cameras. Refer to camera owner's manual for details. The flash is controlled at a slow shutter speed to the correct exposure for both the main subject and back ground in low light conditions or at night.
When the flash unit is turned on, it is automatically set for TTL (E-TTL II / E-TTL for Canon, or i-TTL for Nikon, or ADI / P-TTL for Sony) automatic flash mode.
Wireless slave Flash Di600 has a wireless remote flash system as a slave unit. You can enjoy creative flash photography with multiple lightings from the various directions.
Switch Di600 on and while the ready lamp is on, press the mode select button to select desired mode. The mode select button turns to TTL (no light)— Manual (red)—SD (green)—SF (blue)----- Wireless TTL slave(Purple) and back to TTL. Setting slave flash Di600: When flash is set to SD or SF mode, the first lamp of flash power level is lighten.
To reset the flash unit to another mode, press the mode select button for TTL and or Manual mode. Energy saving system for stand-by mode will not work when it's in slave mode. Automatic shut off function is however in effect. It automatically turns-off when not in use over 60 minutes.
TTL exposure level is accurately calibrated for standard balance in accordance with Nissin’s standard. If any adjustment is however required, or if you like to set your preferable level, it can be adjusted for about ±0.75 (3/4) Ev. This adjustment can only be set when the flash is off.
Specifications Usable cameras Canon EOS digital SLR cameras Nikon iTTL digital SLR cameras Guide No. Illumination coverage 44/145 at 105mm focal length (ISO 100 m/ft) 24-105mm (16mm with diffuse panel.
Install batteries to correct direction. T rouble Shooting The flash unit does not start charging. Batteries are not correctly installed Mount the flash unit firmly on the camera's hot shoe. The flash unit does not fire. The flash unit is not firmly clipped on the camera Replace the batteries if the recycle time is beyond 30 seconds.
W arranty In case of the following reason of the defect, it may void the warranty. Please refer the respective warranty condition for details which depends on the country of purchase. 1. The product is not used in accordance with the instruction of the owner’s manual.
Nissin Japan Ltd., T okyo http://www .nissin-japan.com Nissin Marketing Ltd., Hong Kong http://www .nissindigital.com 600.Rev.0613.1.0 Design and Specifications are subject to change without prior notice.
デバイスNissin Di600の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Nissin Di600をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはNissin Di600の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Nissin Di600の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Nissin Di600で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Nissin Di600を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はNissin Di600の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Nissin Di600に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちNissin Di600デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。