Nokiaメーカー9400 Sの使用説明書/サービス説明書
ページ先へ移動 of 28
Owner’s Manual MEDIAMASTER 9400S.
.
GB 3 Contents FOR YOUR SAFETY 4 Rear panel 4 Front panel 5 INSTALLATION OF THE MEDIAMASTER 5 Connecting the Mediamaster to the satellite dish 6 Connecting the Mediamaster to a TV set 6 Connecting to a.
GB 4 • Keep a clear space around the Mediamaster to allow for sufficient ventilation. • Do not cover the Mediamaster or place it on a unit that emits heat.
GB 5 The box for your Mediamaster should contain the following items: Medi a master 9400 S includes About the SCART sockets Ÿ The rear panel of the Mediamaster is equipped with 2 SCART sockets . When you connect other products to any of these sockets, always use fully featured SCART cables (as supplied).
GB 6 Installing the satellite dish Ÿ Your satellite dish should be installed with a cable for you to connect to t he Mediama ster. If you do not have this cable you will need to buy one from a dealer (tell the dealer you need a coaxial cable and F - connectors).
GB 7 Refer to your video recorder manual for full instructions. Ÿ Connect one SCART cable between the main SCART socket on the TV and the TV SCART socket on the Mediamaster. Ÿ Connect another SCART cable between the VCR and the AUX SCART socket on the Mediamaster.
GB 8 Connect an RCA/Cinch stereo cable from the AUDIO L R sockets on the Mediamaster to the LINE, AUX, SPARE or EXTRA input sockets on your Hi Fi system .
GB 9 This section describes how to operate the Mediamaster using the buttons on the remote control. Some of the functions can also be carried out using the buttons on the front panel. T o switch the Mediamaster in and out of standby mode. EXIT TV To return to the viewing mode from a menu without storing settings (in menu mode).
GB 10 Once you have correctly connected the Mediamaster, you also have to perform some “ Basic Settings ” . During this procedure, helpful information is displaye d at the bottom of the menus. Please note! The OK button always confirms a selection within these menus, and pressing it will take you to the next step in the installation process.
GB 1 1 To install the Mediamaster properly you have to adjust a few settings. You will always be guided by the information at the bottom of the menus. When you have finished the final part of the setup procedure you can start watching TV channels and listening to radio channels.
GB 12 S atellite name : From here you can select a name for the configuration. Switch Type : There are in principle two kinds of external DiSEqC switches on the market at pre sent. One for connection of two LNBs. The other one for connection of up to 4 LNBs.
GB 13 You can use manual channel search if you want to add new channels later. For example If you have a special antenna configuration which is not assigned in the “ Antenna alternative ” menu, you can add new channels using the “ manual channel search ” func tion.
GB 14 If you have a TV set with a 4:3 picture format, and the transmission is in 16:9, y ou can select “ 4:3 (Pan & Scan) ” or “ 4:3 ( Letterbox ) ” to change display format. “ 4:3 (Pan & Scan) ” will fill up the screen vertically, but cut off some information from the left and right sides of the picture.
GB 15 By pressing the GUIDE button you obtain access to the TV Guide which give s the titles of the current programme s on the different channels. By pressing the LEFT or RIG HT button you also can also obtain information about the next programme. The minimized viewing window also helps you to select channels and information.
GB 16 While listening to radio Programmes you can see a programme list on the screen by pressing the OK button. You can change to another channel by pressing the UP/DOWN buttons and then press ing the OK button. To move faster ( 8 at the time) between the channels you can also use the DOUBLE ARROW buttons.
GB 17 TV/Radio Channels will show a list with the names of the different channels. To move faster within the list, use the DOUBLE ARROW buttons. Press OK to enter a marked channel. These guides will give you an overview of programme i nformation from the TV/Radio channels.
GB 18 If you have created several Favorite lists you can determine the sequence in which the lists will appear. To rearrange channels, select the list which you want to move using the OK button. Move the channels to the desired posit ion using the UP/DOWN button and press OK.
GB 19 Y ou can arrange the order of channels within your favorite lists. To rearrange channels, select the channel which you want to move using the O K button.
GB 20 Change a ccess code From here you can change the access code from the standard 1234. DO NOT FORGET IT! Without it you do not have access to any of the functions where the code is required! If you forget it, you have to contact an Authorized Nokia Service Center t o get help.
GB 21 You can en joy this On/Off Timer for such a convenience as wake - up or automatic VCR recording. Mediamaster will be automatically switched - on and play specified channel for the specified time, and then switched - off. You may specify up to 8 separate lists with turn - on time, date, duration, channel and occurrence options.
GB 22 Select this Menu from the line “ Installat ion ” in the Main Menu. The submenu will give you the opportunity to change the preferences performed during first time installation. You can also add features that were not included in the first installation.
GB 23 This will start the Installation procedure from the “ Welcome Menu ” . When you press OK in the “ Welcome Menu ” again, be aware of the fact, that all previous channels and settings will be erased! To exit the ” Reinstall ” menu without erasing any channels, press “ Back ” .
GB 24 AGC Acquisition Gain Control. Audio system With digital satellite reception, the sound is transmitted in packages and is elected either in a special audio mode or pre - selected by using the installation set - up. This makes it possible to select between several different languages in a film.
GB 25 Problem Possible causes What to do The display on the front panel does not light up/is not lit. Mains lead is not connected. Check that the mains lead is plugged into the power socket . No sound or picture. The satellite dish is not po inting at the satellite.
GB 26 Transmission Standards DVB,MPEG2 LNB/Tuner input Connector 2 x F - type (Loop Through) Input frequency 950 - 215 0MHz Max Current 500mA max Supply Voltage 13V/18V DiSEqC 1.
GB 27 System Settings 1.TV Screen Format 2.Output Selection 3.UHF Channel Number 4.RF Modulator Type 5.Information Box Time out 6.Display Volume Indicator 7.Date Setting(dd/mm/yyyy) 8.Time Setting(hh:mm) 9.GMT Offset 7.Game First Time Installation MENUS SCREEN STRUCTURE Welcome Menu Language Settings 1.
Nokia is a registered trademark of Nokia Corporation www.nokia.com 66 76967-10 KQX1A668Y.
デバイスNokia 9400 Sの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Nokia 9400 Sをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはNokia 9400 Sの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Nokia 9400 Sの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Nokia 9400 Sで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Nokia 9400 Sを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はNokia 9400 Sの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Nokia 9400 Sに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちNokia 9400 Sデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
