Nokiaメーカー9600Cの使用説明書/サービス説明書
ページ先へ移動 of 23
GB 1 Owner’ s Manual MEDIAMASTER 9600 C.
GB 2 Important Information Wiring the plug (UK and Eire only) The mains lead on this product is already fitted with a non-rewireable (moulded) plug incorporating a fuse, the value of which is indicated on the pin face of the plug.
GB 3 For your safety • Keep a clear space around the Mediamaster to allow for sufficient ventilation. • Do not cover the Media- master or place it on a unit that emits heat. • Use a soft cloth and a mild so- lution of washing-up liquid to clean the casing.
GB 4 Welcome AUDIO L R Stereo outputs for connection to a HiFi system TV SCART Connec- tion to the TV set AUX Input SCART connection for e. g. an analogue satellite receiver or a second Video recorder.
GB 5 SCART cable The box for your Mediamaster should contain the following items: • the Mediamaster • a remote control handset with batteries. • a fully featured SCART cable for connection to the TV set.
GB 6 Connecting to a TV and a video recorder Refer to your video recorder manual for full instructions. • Connect one SCAR T cable between the TV and the TV SCART socket on the Mediamaster . • Connect another SCART cable between the video recorder and the VCR SCART socket on the Mediamaster .
GB 7 Preparing the remote control • Remove the cover on the battery compartment at the bottom of the remote control handset. • Insert the 2 x AAA (1,5 V) batteries, as shown in the diagram, taking care to observe the + and - markings indicated inside.
GB 8 T o turn the Mediamaster on/off (standby). Press once to switch to audio language/audio track (if available). Press twice to switch to Radio mode. TV T o leave a menu and go back to watch a TV pro- gramme. T o switch from Radio Mode to TV Mode. T o toggle between terrestrial TV , VCR, analogue and the digital satellite signal.
GB 9 About the Smart Card and CA Module T o be able to receive pay-TV channels you will need a CA Mod- ule and a Smart Card from the Service Provider of your choice.
GB 10 Language selection Select the desired language. This will define the language shown in the menus. It will also select this language as the main lan- guage in cases where more than one is transmitted for speech and subtitling in movies. The Welcome Menu T o install the Mediamaster properly you have to adjust a few set- tings.
GB 11 Important general information The following will describe the basic functions of your Media- master during the watching of TV or listening to Radio channels from the Mediamaster .
GB 12 Programme Information. The “i“ Button Every time you change channel you will receive information for 4-5 seconds about the current programme. This information in- cludes: Channel number , name, title and time. Press “ i ” while watching a channel.
GB 13 The Radio button Pressing the button once gives you a menu where you can change the spoken language in the present TV programme. (Only if more than one language is transmitted). Pressing the button twice will lead to the specific Audio Chan- nel mode .
GB 14 Video recorder With a Video Cassette Recorder (VCR) connected you can watch/ record video tapes * . If your VCR is connected with a SCAR T cable and you press the Start button on the VCR, the playback will start and interrupt the TV programme from the Mediamaster .
GB 15 Subtitling and T eletext. The TEXT button Pressing the TEXT button once while watching TV will put a menu on the screen where it is possible to change a subtitled lan- guage. This is only possible if more than one subtitling language is transmitted.
GB 16 How to show the Main Menu Press the MENU button and you will get the Main Menu on the TV screen. Press the TV button to leave the menu. Submenus from the Main Menu If you select one of the highlighted titles and press the OK but- ton, a submenu will be shown on the TV screen.
GB 17 CD From the CD menu you can control an external CD player con- nected to the SCSI socket. T o use present and future CD-ROM applications, the player must have the following features: a) SCSI-2 c.
GB 18 Installation Select this Menu from the line “Installation” in the Main Menu. The submenu will give you the opportunity to change the prefer - ences performed during first time installation. Y ou can also add features that were not included from the first time installation.
GB 19 Language Settings From here you can change the language for the menus, audio language and subtitle language. Just follow the instructions given at the bottom of the menu. System Settings T ime Adjustment : Adjust the clock in steps of ± 1/2 hour .
GB 20 Symbols on the Mediamaster display No TS No T ranspor t Stream = No signal. Channel name. Signal indicator . A square means full signal. ? No function. Err Error message. UPGRADE The Mediamaster is busy downloading new software. First time Installation Will start the Installation procedure from the “W elcome Menu”.
GB 21 MPEG Moving Picture Experts Group PIN code Personal Identification Number . A four -digit code that is used for locking/unlocking, eg with the parental control feature.
GB 22 T ransmission Standards DVB, MPEG 2 RF input / Loop through output Input connector IEC female RF impedance 75 Ω RF frequency 47 - 862 MHz RF input power level 55 - 80 dB uV RF impedance 75 Ω.
GB 23 Nokia is a registered trademark of Nokia Corporation 66 76939-10 © 98 26 Mediamaster 9600 C.
デバイスNokia 9600Cの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Nokia 9600Cをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはNokia 9600Cの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Nokia 9600Cの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Nokia 9600Cで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Nokia 9600Cを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はNokia 9600Cの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Nokia 9600Cに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちNokia 9600Cデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。