NokiaメーカーN95の使用説明書/サービス説明書
ページ先へ移動 of 181
Nokia N95 8GB User Guide Issue 1.
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RM-320 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http:// www.
The third-party applications provided with your device may have been created and may be owned by persons or entities not affiliated with or related to Nokia. Nokia does not own the copyrights or intellectual property rights to the third-party applications.
Contents For your safety .......................................... 10 About your device ......................................................... 11 Network services ........................................................... 12 Enhancements, batteries, and chargers .
Remote SIM mode ...................................................... 40 Infrared .......................................................................... 40 USB .................................................................................. 41 PC connections .
Record videos ............................................................. 69 After recording a video .............................................. 70 Camera settings.............................................................71 Still image camera settings .
Clock ............................................................................ 100 Alarm clock................................................................100 World clock ............................................................... 100 Calendar .
Contacts (phonebook) .............................. 128 Save and edit names and numbers ........................... 128 Manage names and numbers .................................... 128 Default numbers and addresses ................................ 129 Add ringing tones for contacts .
Battery information ................................. 160 Charging and discharging .......................................... 160 Nokia battery authentication guidelines ................. 161 Authenticate hologram .....................................
For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.
BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information stored in your device. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.
properly, take it to the nearest authorized service facility. Your device may have preinstalled bookmarks and links for third-party internet sites. You may also access other third-party sites through your device. Third-party sites are not affiliated with Nokia, and Nokia does not endorse or assume liability for them.
power cord of any enhancement, grasp and pull the plug, not the cord. 13 For your safety.
Get connected Nokia N95 8GB supports the following connectivity methods: ● 2G and 3G networks ● Bluetooth connectivity — to transfer files and connect to compatible enhancements. See "Bluetooth connectivity," p. 37. ● Nokia AV connector (3.
Useful information Model number: Nokia N95-2 Hereinafter referred to as Nokia N95 8GB. Help Your device has context-sensitive help. When an application is open, select Options > Help to access help for the current view.
Software updates Nokia may produce software updates that may offer new features, enhanced functions, or improved performance. You may be able to request these updates through the Nokia Software Updater PC application.
use of your device, change the lock code. Keep the new code secret and in a safe place separate from your device. If you forget the code, contact your service provider. ● Personal unblocking key (PUK) code and PUK2 code — These codes (8 digits) are required to change a blocked PIN code or PIN2 code, respectively.
● If the signal strength of the cellular network varies much in your area, your device must scan for the available network repeatedly. This increases the demand on battery power. If the network mode is set to dual mode in the network settings, the device searches for the UMTS network.
● Images and video clips in Gallery. Back up the files to a compatible PC using Nokia Nseries PC Suite. If you are deleting multiple items and one of the following notes is shown, delete items, one by one, beginning with the smallest item: ● Not enough memory to perform operation.
Your device Welcome When you switch on your device, the Welcome application is displayed. Select from the following: ● Sett. wizard — to configure various settings, such as e-mail. For more information on the Settings wizard application, see the guides available at the Nokia product support pages or your local Nokia website.
2. Select the connection type you want to use to transfer the data. Both devices must support the selected connection type. 3. If you select Bluetooth connectivity: To have your device search for devices with Bluetooth connectivity, select Continue . Select the device from which you want to transfer content.
Use shortcuts to repeat a transfer After a data transfer, you can save a shortcut with the transfer settings to the main view to repeat the same transfer later. To edit the shortcut, scroll to it, and select Options > Shortcut settings . You can, for example, create or change the name of the shortcut.
A packet data connection is active in a part of the network that supports EGPRS (network service). indicates the connection is on hold and that a connection is available. The icons indicate that EGPRS is available in the network, but your device is not necessarily using EGPRS in the data transfer.
Lock the keypad To lock the keys, press the left selection key, then the right selection key. To unlock the keys, open the 2-way slide, or press the left selection key, then the right selection key. You can select to lock the keypad automatically after a time-out or when the 2-way slide is closed.
game demos, and download and install the full N-Gage application when it becomes available. ● N-Gage application — The full featured application gives you access to the complete N- Gage experience. You can find new games, try and buy games, find other players, and access scores, events, chat, and more.
Fast downloading High-speed downlink packet access (HSDPA, also called 3.5G, indicated by ) is a network service in UMTS networks and provides high-speed data downloads.
Web browser With the Web browser, you can view hypertext markup language (HTML) web pages on the internet as originally designed. You can also browse web pages that are designed specifically for mobile devices, and use extensible hypertext markup language (XHTML), or the wireless markup language (WML).
Tip: To visit a web page saved as a bookmark in the bookmarks view, while browsing, press 1 , and select a bookmark. To retrieve the latest content of the page from the server, select Options > Navigation options > Reload . To save the web address of the current page as a bookmark, select Options > Save as bookmark .
● Find — Search for keywords within the current page. ● Reload — Refresh the page. ● Subscribe to web feeds (if available) — View a list of available web feeds on the current web page, and subscribe to a web feed. Navigate pages Mini Map and page overview help you navigate web pages that contain a large amount of information.
Content search To search for keywords, phone numbers, or e-mail addresses within the current web page, select Options > Find and the desired option. To go to the previous match, scroll up. To go to the next match, scroll down. Tip: To search for keywords within the page, press 2 .
addresses received in messages to your bookmarks and send saved bookmarks. To open the bookmarks view while browsing, press 1 , or select Options > Bookmarks . To edit the details of a bookmark, such as the title, select Options > Bookmark manager > Edit .
device and the internet gateway or server is encrypted. The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server.
pages into the Auto. bookmarks folder, but hide the folder from the bookmarks view, select Hide folder . ● Form data saving — If you do not want the data you enter to different forms on a web page to be saved and used the next time you open the page, select Off .
Connections Your device offers several options to connect to the internet or to another compatible device or PC. Wireless LAN Your device supports wireless local area network (WLAN). With WLAN, you can connect your device to the internet and compatible devices that have WLAN.
WLAN access point device at a time, but several applications can use the same internet access point. When the device is in the offline profile, you can still use WLAN (if available). Remember to comply with any applicable safety requirements when establishing and using a WLAN connection.
● Details — View the details of a network shown in the list. If you select an active connection, the connection details are displayed. ● Define access point — Create an internet access point (IAP) in a WLAN. ● Edit access point — Edit the details of an existing IAP.
To view the details of a network, select Options > Details . To create an internet access point in a network, select Options > Define access point . Bluetooth connectivity About Bluetooth connectivity You can make a wireless connection to other compatible devices with Bluetooth connectivity.
● Bluetooth — To make a wireless connection to another compatible device, first set Bluetooth connectivity On , then establish a connection. To switch off Bluetooth connectivity, select Off . ● My phone's visibility — To allow your device to be found by other devices with Bluetooth wireless technology, select Shown to all .
When the connection is established, Sending data is displayed. Tip: When searching for devices, some devices may show only the unique address (device address).
through Bluetooth connectivity are indicated by . Remote SIM mode Before the remote SIM mode can be activated, the two devices must be paired and the pairing initiated from the other device. When pairing, use a 16-digit passcode, and set the other device as authorised.
5. To send data using infrared, locate the desired file in an application or the file manager, and select Options > Send > Via infrared . If the data transfer is not started within 1 minute after the activation of the infrared port, the connection is cancelled and must be started again.
4. To start searching for devices with Bluetooth connectivity, select Options > Find keyboard . 5. Select the keyboard from the list, and press the scroll key to start the connection. 6. To pair the keyboard with your device, enter a passcode of your choice (1 to 9 digits) on the device and the same passcode on your keyboard.
Nokia Video Centre With Nokia Video Centre (network service), you can download and stream video clips over the air from compatible internet video services using packet data or WLAN. You can also transfer video clips from a compatible PC to your device and view them in Video Centre.
6. When the clip is playing, use the media keys to control the player. To adjust the volume, press the volume key. Downloads continue in the background if you exit the application.
Manager available in Nokia Nseries PC suite. To transfer videos from a compatible PC, do the following: 1. To view your device on a PC as a mass memory device ( E: ) where you can transfer any data files, make the connection with a compatible USB data cable.
Music folder Music player Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. Music player supports files formats such as AAC, AAC +, eAAC+, MP3, and WMA.
To fast forward or rewind, press and hold or . To go to the next item, press . To return to the beginning of the item, press . To skip to the previous item, press again within 2 seconds after a song or podcast has started. To switch random play ( ) on or off, select Options > Shuffle .
3. To add songs now, select Yes ; or to add the songs later, select No . 4. If you select Yes , select artists to find the songs you want to include in the playlist. Press the scroll key to add items. To show the song list under an artist title, scroll right.
5. Select the device in which the file is played. Copy songs or podcasts wirelessly To copy or transfer media files from your device to another compatible device in a home network, select a file and Options > Move and copy > Copy to home network or Move to home net.
To refresh the library, in the music menu, select Options > Refresh Music library . Both Windows Media Player and Nokia Music Manager in Nokia Nseries PC Suite have been optimised to transfer music files.
your device. To purchase music, you first need to register for the service. To check the Nokia Music Store availability in your country, visit www.nokia.com/music. To access the Nokia Music Store, you must have a valid internet access point in the device.
To start a station search, select or . To change the frequency manually, select Options > Manual tuning . If you have previously saved radio stations, to go to the next or previous saved station, select or . To adjust the volume, press the volume key.
only if there is no network coverage when the application is started. Nokia Podcasting With the Nokia Podcasting application (network service), you can search, discover, subscribe to, and download podcasts over the air, and play, manage, and share audio and video podcasts with your device.
Setting the application to retrieve podcasts automatically may involve the transmission of large amounts of data through your service provider’s network. Contact your service provider for information about data transmission charges. To restore the default settings, select Options > Restore default in the settings view.
of the .opml (outline processor markup language) file, and Done . To edit the selected folder, web link, or web directory, select Options > Edit . To import an .opml file stored on your device, select Options > Import OPML file . Select the location of the file, and import it.
not have an access point defined or if during packet data connection you are asked to enter a user name and password, contact your service provider. To edit the URL of the selected podcast, select Options > Edit . To delete a downloaded podcast or marked podcasts from your device, select Options > Delete .
Media folder RealPlayer With RealPlayer, you can play video clips or stream media files over the air without saving them to the device first. RealPlayer supports files with extensions such as 3gp, .mp4, or .rm. However, RealPlayer does not necessarily support all file formats or all the variations of file formats.
● Video — Select whether video clips are automatically repeated after they finish playing. ● Streaming — Select whether to use a proxy server, change the default access point, and set the port range used when connecting. Contact your service provider for the correct settings.
Installation on your PC Before you install Nokia Lifeblog on a compatible PC, you need the following: ● 1 GHz Intel Pentium or equivalent, 128 MB RAM ● 400 MB of available hard disk space (if Micr.
3. In the Nokia Lifeblog PC application, select File > Copy from Phone and to Phone . The new items from your device are copied to your PC. The items on the To Phone tab on your PC are copied to your device. Browse time line and favourites Press , and select Applications > Media > Lifeblog .
Post items to the web from your PC 1. In the time line or favourites, select the items (a maximum of 50) that you want to post to the web. 2. Select File > Post to the Web... . 3. Enter a title and a caption for the post. You can also write a longer story or description in the body text field.
Digital rights management (DRM) protected content comes with an associated activation key that defines your rights to use the content. If your device has OMA DRM protected content, to back up both the activation keys and the content, use the backup feature of Nokia PC Suite.
Camera To activate the main camera, press and hold the capture key, or press , and select Applications > Camera . To close the main camera, press Exit .
1 — Capture mode indicator 2 — Active toolbar. The toolbar is not displayed during image capture. See "Active toolbar," p. 64. 3 — Battery charge level indicator 4 — Image resolution indicator, which indicates whether the quality of the image is Print 5M - Large , Print 3M - Medium , Print 2M - Medium , E- mail 0.
to select a colour effect to show or hide the viewfinder grid (images only) to adjust white balance to adjust the exposure compensation (images only) to adjust sharpness (images only) to adjust contrast (images only) to adjust light sensitivity (images only) The icons change to reflect the current status of the setting.
3. To take a picture, press the capture key. Do not move the device before the image is saved. To zoom in or out when taking a picture, use the zoom key in your device. Tip: To open Gallery and view the pictures you have taken, press on the side of your device twice.
The camera of your device has an LED flash for low light conditions. The following flash modes are available for the still image camera: Automatic ( ), R. eye redu. ( ), On ( ), and Off ( ). To change the flash mode, in the active toolbar, select the desired flash mode.
You in the picture—self-timer The self-timer is available only in the main camera. Use the self-timer to delay the capture so that you can include yourself in the picture. To set the self-timer delay, in the active toolbar, select Self timer > 2 seconds , 10 seconds , or 20 seconds .
● Sidelit subject. Strong side light gives a dramatic effect but may be too harsh, resulting in too much contrast. ● Light source in front of the subject. Harsh sunlight may cause the subjects to squint their eyes. The contrast may also be too high.
● To make lighting and colour adjustments, scroll through the active toolbar. See "Setup settings— adjust colour and lighting," p. 72. See "Scenes," p. 67. ● To free memory for new video clips, you can back up files to a compatible PC using a compatible USB data cable, for example.
up an account for a compatible online album). See "Share images and videos online," p. 81. ● To return to the viewfinder to record a new video clip, press the capture key. Camera settings There are two kinds of settings for the camera: setup settings and main settings.
● Rotate image — Select whether you want the image to be rotated upright when you open it in Gallery. ● Restore camera settings — Select Yes to return the default values to the camera settings.
● Video quality — Set the quality of the video clip to TV high quality , TV normal quality , E-mail high quality , E-mail norm. quality (standard quality for playback through your handset), or Sharing quality .
Gallery To store and organise your images, video clips, sound clips, and streaming links, or share your files with other compatible Universal Plug and Play (UPnP) devices through wireless LAN (WLAN), press , and select Gallery . Tip: If you are in another application, to view the last saved picture in Gallery, press on the side of your device.
you in a multimedia message, as an e-mail attachment, or through Bluetooth connectivity or infrared. To be able to view a received image or video clip in Gallery or in the RealPlayer, you must first save it. The video clips saved in Nokia Video Centre are not shown in Images & videos in Gallery.
The available options vary depending on the view you are in and whether you have selected an image or a video clip. The settings in the active toolbar return to the default settings after you close the camera. If you want the active toolbar to always be visible on the display, select Options > Show icons .
To view the images in the print basket, select from Images & videos (available only when you have added pictures to the print basket), or Options > Print > View Print basket . To remove an image from the print basket, select an image in Images & videos or in an album, and Options > Remove from basket .
Crop image To crop an image, select Options > Apply effect > Crop , and a predefined aspect ratio from the list. To crop the image size manually, select Manual . If you select Manual , a cross appears in the upper left corner of the image. Use the scroll key to select the area to crop, and select Set .
Before viewing the images and video clips on TV, you may need to configure the TV-out settings for the applicable TV system and TV aspect ratio. See "Enhancement settings," p. 144. To watch images and video clips on TV, do the following: 1. Connect a Nokia Video Connectivity Cable to the video input of a compatible TV.
To rotate the image 90 degrees clockwise or counterclockwise, press 1 or 3 , respectively. To rotate the image 45 degrees, press 7 or 9 . To switch between full and normal screen, press * .
To select the paper size, select Paper size , the size of paper from the list, and OK . Select Cancel to return to the previous view. Print online With Print online, you can order prints of images online directly to your home or to a store where you can pick them up.
home devices to connect to the same home network. See "Wireless LAN," p. 34. The home network uses the security settings of the WLAN connection. Use the home network feature in a WLAN infrastructure network with a WLAN access point device and encryption enabled.
The options related to home network are not available in applications before the settings in the Home media application have been configured. When you access the Home media application for the first time, the setup wizard opens and helps you define the home network settings for your device.
View and share media files To share your media files with other UPnP compatible devices in the home network, set content sharing on. See "Set sharing on and define content," p.
Copy media files To copy or transfer media files from your device to another compatible device, such as a UPnP compatible PC, select a file in Gallery and Options > Move and copy > Copy to home network or Move to home net. . Content sharing does not have to be switched on.
Positioning (GPS) About GPS The Global Positioning System (GPS) is a worldwide radio navigation system that includes 24 satellites and their ground stations that monitor the operation of the satellites.
Positioning server > Access point . A wireless LAN access point cannot be used for this service. The packet data internet access point is asked when GPS is used for the first time in your device.
received enough data from the satellite signal to calculate the coordinates of your location, the bar turns black. Initially your device must receive signals from at least four satellites to be able to calculate the coordinates of your location.
Downloading maps may involve the transmission of large amounts of data through your service provider's network. Contact your service provider for information about data transmission charges. Tip: You can also download maps by using a wireless LAN connection or through the internet using Nokia Map Loader PC software.
view its details, or start navigation (extra service), press the scroll key, and select the desired option. When you browse the map on the display, for example, move to another country, a new map is downloaded automatically.
accuracy is generally better when more satellites are found. Download maps When you browse the map on the display, for example, move to another country, a new map is downloaded automatically. These downloaded maps are free of charge, but downloading may involve transmission of large amounts of data through your service provider's network.
Find a place To view points of interest near your current location or other locations on the map, select Options > Find place > Nearby and a category. To search for a point of interest by name, select Options > Find place > Keyword search or start entering the first letters of the name, and select Find .
by-turn navigation service with voice guidance to use it in Maps. The downloaded guides are automatically saved to your device. The licence you purchase for a guide or navigation is device-specific and cannot be transferred from your device to another device.
To confirm the purchase, select OK twice. To receive a confirmation of the purchase through e-mail, enter your name and e-mail address, and select OK . Landmarks Press , and select Tools > Connectivity > Landmarks . With Landmarks, you can save the position information of specific locations in your device.
The coordinates in the GPS are expressed in degrees and decimal degrees format using the international WGS-84 coordinate system. To use GPS data, the GPS receiver of your device must initially receive position information from at least four satellites to calculate the coordinates of your location.
Select Reset to set the trip distance and time and average and maximum speeds to zero, and to start a new calculation. Select Restart to set the odometer and total time to zero. The trip meter has limited accuracy, and rounding errors may occur. Accuracy can also be affected by availability and quality of GPS signals.
Personalise your device You can personalise your device by changing the standby mode, main menu, tones, themes, or font size. Most of the personalisation options, such as changing the font size, can be accessed through the device settings. See "Personalisation settings," p.
Tip: To switch between the general and silent profiles in the standby mode, press and hold # . To modify a profile, scroll to the profile, and select Options > Personalise . Scroll to the setting you want to change, and press the scroll key to open the choices.
Modify the standby mode To switch the active standby on or off, press , and select Tools > Settings > General > Personalisation > Standby mode > Active standby . The active standby display shows application shortcuts, and events from applications such as calendar and player.
Time management Clock Alarm clock Press , and select Applications > Clock . To set a new quick alarm, select Options > New quick alarm . Quick alarms are set for the next 24 hours and they cannot be repeated. To view your active and inactive alarms, scroll right to the alarm tab.
Calendar Create a calendar entry Press , and select Applications > Calendar . 1. To add a new calendar entry, scroll to the desired date, and select Options > New entry and one of the following: ● Meeting — to remind you of an appointment that has a specific date and time ● Meeting request — to create and send a new meeting request.
information of received calendar entries may not be displayed correctly. To modify the calendar, select Options > Settings > Calendar alarm tone , Default view , Week starts on , or Week view title .
Messaging Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device. Messaging main view Press , and select Messaging (network service). To create a new message, select New message .
Messaging main view, select Options > Cell broadcast . Cell broadcast messages cannot be received in UMTS networks. A packet data connection may prevent cell broadcast reception. Write text Your device supports traditional text input and predictive text input.
the dictionary, select Spell , enter the word using traditional text input, and select OK . The word is added to the dictionary. When the dictionary is full, a new word replaces the oldest added word. 4. Start writing the next word. To turn predictive text input off for all editors in the device, press , and select Predictive text > Off .
To mark multiple items in a list, press and hold while you scroll up or down. To end the selection, stop scrolling, and release . Write and send messages Press , and select Messaging . Before you can create a multimedia message or write an e-mail, you must have the correct connection settings in place.
To insert a new slide to the message, select Slide . To see what the multimedia message looks like, select Options > Preview . 7. To add an attachment to an e-mail, select Options > Insert > Image , Sound clip , Video clip , Note , or Other for other file types.
Multimedia messages Important: Exercise caution when opening messages. Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC. You may receive a notification that a multimedia message is waiting in the multimedia message centre.
If you select Mailbox in the Messaging main view and have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start . When you create a new mailbox, the name you give to the mailbox replaces Mailbox in the Messaging main view.
retrieval . See "Automatic retrieval settings," p. 114. Setting the device to retrieve e-mail automatically may involve the transmission of large amounts of data through your service provider's network. Contact your service provider for information about data transmission charges.
Some or all message centres or access points may be preset for your device by your service provider, and you may not be able to change, create, edit, or remove them. Text message settings Press , and select Messaging > Options > Settings > Text message .
Outside your home cellular network, sending and receiving multimedia messages may cost you more. If you select Multimedia retrieval > Always automatic , your device automatically makes an active packet data connection to retrieve the message both in and outside your home cellular network.
● Access point in use — Select an internet access point (IAP). See "Access points," p. 151. ● Mailbox name — Enter a name for the mailbox. ● Mailbox type — Defines the e-mail protocol that your remote mailbox service provider recommends.
Select from the following: ● E-mail to retrieve — Define which parts of the e-mail are retrieved: Headers only , Size limit (POP3), or Msgs. & attachs. (POP3). ● Retrieval amount — Define how many new e- mail messages are retrieved to the mailbox.
● Topic detection — Select whether the device automatically searches for new topic numbers, and saves the new numbers without a name to the topic list.
Make calls Voice calls 1. In the standby mode, enter the phone number, including the area code. To remove a number, press C . For international calls, press * twice for the + character (replaces the international access code), and enter the country code, area code (omit the leading zero if necessary), and phone number.
Tip: When you have only one active voice call, to put the call on hold, press the call key. To activate the call, press the call key again. During an active call, to route the sound from the handset to the loudspeaker, select Options > Activate loudspeaker .
3. When the new call is answered, to join the first participant in the conference call, select Options > Conference . To add a new person to the call, repeat step 2, and select Options > Conference > Add to conference . Your device supports conference calls between a maximum of six participants, including yourself.
Voice dialling Your device supports enhanced voice commands. Enhanced voice commands are not dependent on the speaker’s voice, so the user does not record voice tags in advance. Instead, the device creates a voice tag for the entries in contacts, and compares the spoken voice tag to it.
device or an ISDN client. Video calls cannot be made while another voice, video, or data call is active. Icons You are not receiving video (the recipient is not sending video or the network is not transmitting it). You have denied video sending from your device.
Answer or decline a video call When a video call arrives, is displayed. To answer the video call, press the call key. Allow video image to be sent to caller? is displayed. To start sending live video image, select Yes . If you do not activate the video call, video sending is not activated, and you only hear the sound of the caller.
Settings To set up video sharing, you need person-to-person and UMTS connection settings. Person-to-person connection settings A person-to-person connection is also known as a Session Initiation Protocol (SIP) connection. The SIP profile settings must be configured in your device before you can use video sharing.
number. If the SIP address or phone number of the recipient is not available, enter the SIP address or the phone number of the recipient including the country code, and select OK to send the invitation. 3. Sharing begins automatically when the recipient accepts the invitation.
To connect to an internet call service, your device must be in the coverage of a connection network, such as a WLAN access point. Your device supports voice calls over the internet (net calls). Your device attempts emergency calls primarily over cellular networks.
When you are connected to an internet call service, is shown in the standby mode. The list of networks is refreshed automatically every 15 seconds. To refresh the list manually, select Options > Refresh . Use this option if your WLAN access point is not shown.
automatic login type for WLANs, the device periodically scans for WLANs, which increases the demand on battery power and reduces the battery life. To log in manually to the internet call service, select Login type > Manual .
packet data connections by the amount of data sent and received. Monitor all communication events Press , and select Tools > Log > Recent calls .
Contacts (phonebook) In Contacts, you can save and update contact information, such as phone numbers, home addresses, or e-mail addresses of your contacts.
Default numbers and addresses Press , and select Contacts . You can assign default numbers or addresses to a contact card. In this way if a contact has several numbers or addresses, you can easily call or send a message to the contact to a certain number or address.
SIM directory and other SIM services For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider or other vendor. To see the names and numbers stored on the SIM card, select Options > SIM contacts > SIM directory .
3. To remove the contact from the group, select Yes . 131 Contacts (phonebook).
Office folder Quickoffice With Quickoffice, you can view .doc, .xls, .ppt, and .txt documents. All file formats or features are not supported. Apple Macintosh is not supported. To use the Quickoffice applications, press , and select Office > Quickoffice .
Quickpoint supports the viewing of presentations saved in .ppt format created with Microsoft PowerPoint 2000, XP, and 2003. Not all variations or features of the mentioned file formats are supported. To upgrade to a version of Quickpoint that supports editing, when you have a file open, select Options > Upgrade to edit .
1. In the Type field, select the measure you want to use. 2. In first Unit field, select the unit from which you want to convert. 3. In the next Unit field, select the unit to which you want to convert. 4. In the first Amount field, enter the value you want to convert.
In the Saved data view, select Options to scan new codes or use the decoded information. The device reverts to the standby mode to save battery power if the barcode reader cannot be activated or if no keys are pressed for 1 minute. To continue scanning or viewing saved information, press the scroll key.
Applications folder Calculator Press , and select Applications > Calculator . Note: This calculator has limited accuracy and is designed for simple calculations. To make a calculation, enter the first number of the calculation. Select a function such as add or subtract from the function map.
Install applications and software Installation files may be transferred to your device from a compatible computer, downloaded during browsing, or sent to you in a multimedia message as an e-mail attachment or using other connectivity methods, such as Bluetooth connectivity.
During installation, the device shows information about the progress of the installation. If you install an application without a digital signature or certification, the device displays a warning. Continue installation only if you are sure of the origin and contents of the application.
● Default web address — Set the default address used when checking online certificates. Some Java applications may require that a message be sent or a network connection be made to a specific access point to download extra data or components.
Tools folder File manager Press , and select Tools > File mgr. . With File manager, you can browse files and folders in the device memory or mass memory. When you open File manager, the device memory view ( ) opens. Scroll right to open the mass memory view ( ).
technologies may prevent some back-up data from being restored. Contact your service provider for more information about DRM used for your content. See "Activation keys," p. 61. To format mass memory, select Options > Format mass memory .
In the Sync main view, you can see the different synchronisation profiles. A synchronisation profile contains the necessary settings to synchronise data in your device with a remote database on a server or compatible device. To synchronise data, select Options > Synchronise .
Settings Some settings may be preset for the device by your service provider, and you may not be able to change them. General settings In general settings, you can edit the general settings of your device or restore the device to original default settings.
shortcuts are not available if the active standby is on. ● Active standby apps. — Select the application shortcuts you want to appear in the active standby. This setting is only available if the active standby is on. ● Operator logo — This setting is only available if you have received and saved an operator logo.
● TV screen size — Select the aspect ratio of the TV: Normal or Widescreen for widescreen TVs. ● TV system — Select the analogue video signal system that is compatible with your TV. ● Flicker filter — To improve image quality on the screen of your TV, select On .
Certificate management Press , and select Tools > Settings > General > Security > Certificate management . Digital certificates do not guarantee safety; they are used to verify the origin of software. In the certificate management main view, you can see a list of authority certificates that are stored in your device.
Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner.
Phone settings In phone settings, you can edit settings related to phone calls and network. Call settings Press , and select Tools > Settings > Phone > Call .
both lines can be answered irrespective of the selected line. If you select Line 2 and have not subscribed to this network service, you are not able to make calls. When line 2 is selected, is shown in the standby mode. Tip: To switch between the phone lines, press and hold # in the standby mode.
Network settings Press , and select Tools > Settings > Phone > Network . Your device can automatically switch between the GSM and UMTS networks. The GSM network is indicated with in the standby mode. The UMTS network is indicated with . ● Network mode — Select which network to use.
To establish a data connection, an access point is required. You can define different kinds of access points, such as the following: ● MMS access point to send and receive multimedia messages ● In.
● Prompt password — If you must enter the password every time you log in to a server, or if you do not want to save your password in the device, select Yes . ● Password — A password may be needed to make a data connection and is usually provided by the service provider.
● WEP key in use — Select the wired equivalent privacy (WEP) key number. You can create up to four WEP keys. The same settings must be entered on the WLAN access point device. ● Authentication type — Select Open or Shared for the authentication type between your device and the WLAN access point device.
connection only if you start an application or action that needs it. ● Access point — The access point name is needed to use your device as a packet data modem to a compatible computer. ● High speed packet access — Enable or disable the use of HSDPA (network service) in UMTS networks.
With the access point name control service, you can restrict packet data connections and allow your device to use only certain packet data access points.
Troubleshooting Q: What is my password for the lock, PIN, or PUK codes? A: The default lock code is 12345 . If you forget or lose the lock code, contact your device dealer. If you forget or lose a PIN or PUK code, or if you have not received such a code, contact your network service provider.
Press , and select Tools > Bluetooth > Bluetooth > Off . Q: Why can’t the other device see the files stored on my device in the home network? A: Make sure that you have configured the home network settings, content sharing is turned on in your device, and the other device is UPnP compatible.
background scans, select Show WLAN availability > Never . 3. To save your changes, press Back . When Scan for networks is set to Never , the WLAN availability icon is not shown in the standby mode. However, you can still manually scan for available WLAN networks, and connect to WLAN networks as usual.
Nokia original enhancements Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. An extensive range of enhancements is available for your device.
Battery information Charging and discharging Your device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery.
Do not dismantle or shred cells or batteries. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. In the event of such a leak, flush your skin or eyes immediately with water, or seek medical help. Nokia battery authentication guidelines Always use original Nokia batteries for your safety.
To find out more about original Nokia batteries, visit www.nokia.com/battery. 162 Battery information.
Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. ● Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits.
is not working properly, take it to the nearest authorized service facility for service. 164 Care and maintenance.
Additional safety information Small children Your device and its enhancements may contain small parts. Keep them out of the reach of small children. Operating environment This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 1.
● Always keep the wireless device more than 15.3 centimeters (6 inches) from the medical device when the wireless device is turned on. ● Not carry the wireless device in a breast pocket. ● Hold the wireless device to the ear opposite the medical device to minimize the potential for interference.
Potentially explosive environments Switch off your device when in any area with a potentially explosive atmosphere, and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine.
an emergency call. Consult this guide or your service provider for more information. When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may be the only means of communication at the scene of an accident.
MANUFACTURER’S LIMITED WARRANTY This Limited Warranty is in addition to, and does not affect your legal (statutory) rights under your applicable national laws relating to the sale of consumer products.
How to get warranty service If you wish to make a claim under the Limited Warranty, you may call the Nokia call center (where this is available and please note national rates apply to calls) and/or where necessary, return your Product or the affected part (if it is not the entire Product) to a Nokia care center or Nokia designated service location.
was used with, or connected to, a product, accessories, software and/or service not manufactured, supplied or authorized by Nokia or was used otherwise than for its intended use. Defects can be caused by viruses from your or from a third party's unauthorised access to services, other accounts, computer systems or networks.
be liable, either expressly or implied, for any damages or losses of any kind whatsoever resulting from loss of, damage to, or corruption of, content or data during repair or replacement of the Product. All parts of the Product or other equipment that Nokia has replaced shall become the property of Nokia.
excluded, restricted or modified except to a limited extent. If such statutory provisions apply, to the extent to which Nokia is able to do so, its liability under those provisions will be limited, at.
Index A access codes 16 access points 35 , 151 accessories See enhancements activation keys 61 active standby mode 99, 143 active toolbar in camera 64 in gallery 75 address book See contacts alarm clo.
settings 71 video mode 69 video quality 72 cell broadcast messages 104 certificates 146 character encoding 105 charts, spreadsheet 132 clipboard, copying to 105 clock 99 , 100 computer connections 41 .
printing 80, 81 sharing online 81 inbox, message 107 indicators and icons 22 installation of applications 137 internet calls 123 , 125 connecting 124 making 125 profiles 124, 154 settings 154 internet.
P packet data connection access point settings 151 counters 126 settings 153 page overview 29 PDF reader 133 personal certificates 146 personalisation 97 , 143 phonebook See contacts photographs See c.
packet data 153 packet data access points 151 personalisation 143 positioning 147 RealPlayer 57 shortcuts 14 SIP 154 standby 143 tv-out 144 Video Centre 45 video sharing 122 web browser 32 WLAN 153, 1.
W wallpaper 97 web connection 27 web logs 29 , 58 week settings, calendar 101 welcome 20 welcome note 143 WEP 152 wireless keyboard 41 wireless LAN (WLAN) 34 wireless LAN settings 154 Word, Microsoft .
Nokia Care Online The Noki a Care web s upport prov ides you w ith mor e informat ion on our online service s. INTER ACTIVE D EMONSTRAT IONS Learn how to s et up your phone for the first time, and find out more about its fe atures. Interactiv e Demons trations give step-by-step in structions on using yo ur phone.
HOW DO I USE MY PHONE? The Set Up se ction, a t www.nokia-asia.com/setup , helps you prepare your phone for use. Familiarise your se lf with phone functions and features by referrin g to the Guides and Demos sect ion at www.
デバイスNokia N95の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Nokia N95をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはNokia N95の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Nokia N95の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Nokia N95で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Nokia N95を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はNokia N95の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Nokia N95に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちNokia N95デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。