NordicTrackメーカー9600の使用説明書/サービス説明書
ページ先へ移動 of 43
U SER'S M ANUAL C AUTION Read all precautions and instruc- tions in this manual before using this equipment. Keep this manual for future reference. Model No. Serial No. The model number and serial num- ber are found in the location shown below. Write the model number and serial number in the space above.
SECTION 1 Important Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Warning Decal Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.
3 1. It is the responsibility of the owner to ensure that all users of the treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described in this manual. 3. Place the treadmill on a level surface, with at least 2 m (8 ft.
4 22. Always remove iFIT.com CDs from your CD player when you are not using them. 23. Never insert or drop any object into any opening. 24. Make sure to perform all maintenance proce- dures outlined in this manual. Failure to do so may result in damage to the treadmill.
5 The decals shown below are found on the treadmill. If any decal is missing or illegible, please contact your di stri buto r to order a free replacement decal. Apply the decal in the location shown. HAZARDOUS V O LTA G E Disconnect power before servicing.
6 Congratulations for selecting the revolutionary Nordic- Track ® 9600 treadmill. The NordicTrack 9600 treadmill offers an impressive array of features to make your workouts more effective and enjoyable. For your benefit, read this manual carefully before using the NordicTrack 9600 treadmill .
7 Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly can be completed using the included allen wrenches. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
8 6. Make sure that all parts are properly tightened before you use the treadmill. Keep the included allen wrenches for adjustment purposes. To protect the floor or carpet from damage, place a mat under the tread- mill.
9 H OW T O M OVE THE T READMILL Before moving the treadmill, make sure that the power cord is unplugged. Note: It may be neces- sary to disconnect the CATV cable from the tread- mill, depending on how far the treadmill will be moved. Due to the size and weight of the treadmill, mov- ing it requires two persons.
10 HOW TO CONNECT THE POWER CORD This product must be grounded. If it should mal- function or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. Note: These instructions describe how the power cord should be connected in the UK, Germany, Italy, Spain, or France.
11 With the Basic console or the Workout TV console, you can connect a portable CD player to the treadmill and use iFIT.com CDs. (Refer to page 22 for instruc- tions about using iFIT.com CDs.) HOW TO CONNECT YOUR PORTABLE CD PLAYER Plug one end of the included audio cable into the indi- cated jack on the left side of the console.
12 Your treadmill has been pre-configured to operate with the Basic console or the Workout TV console (see the drawings below). For information about the features of the Basic con- sole, refer to page 13; to learn about the state-of-the- art Workout TV console, refer to page 26.
FEATURES OF THE CONSOLE The Basic console offers an impressive array of fea- tures to help you get the most from your exercise. When the manual mode of the console is selected, the speed and incline of the treadmill can be changed with a touch of a button.
GETTING STARTED Plug in the power cord. Refer to HOW TO CONNECT THE POWER CORD on page 10. Move the on/off circuit breaker to the on position. Locate the on/of f circuit breaker on the treadmill near the power cord. Switch the on/off circuit break er to the on position.
HOW TO USE THE MANUAL MODE Insert the key into the console. Refer to GETTING STARTED on page 14. Select the manual mode. When the key is inserted, the manual mode will automatically be selected. If a program or the iFIT.com mode has been selected, press the MODE b ut to n r epeatedly until the main display ap- pears as shown below.
Calories —This section of the main display will show the approximate number of Calories you have burned. Pulse/% Max —When you are using the handgrip pulse sensor or a Polar ® -compatible chest pulse sensor (not included), this section of the main display will show your heart rate (refer to step 6).
17 HOW TO USE PRESET PROGRAMS Insert the key into the console. Refer to GETTING STARTED on page 14. Select one of the six preset programs. When the key is inserted, the manual mode will automatically be selected.
18 To stop the program, press the STOP button. The time will begin to fla sh in the ma in dis pla y. To restart the program, press the START button or the SPEED + button.
19 HOW TO USE PULSE-DRIVEN PROGRAMS Pulse-driven programs automatically control the speed and incline of the treadmill to keep your heart rate near a target level while you exercise. Follow the steps below to use a pulse-driven program. Put on a Polar ® -compatible chest pulse sensor (not included).
20 Each pulse-driven program is divided into one- minute segments. ( The main display will show both the time remaining in the program and the time re- maining in the current segment of the program.) One target heart rate setting is programmed for each segment.
Press the START button or the SPEED + button to start th e pro gram. When the button is pressed, the main displ ay wil l show the words LEVEL 1, indicating that the first four-minute level of the fitness test program has begun. The incline of the treadmill will then auto- matically adjust to 3% and the walking belt will begin to move at 2.
HOW TO USE IFIT.COM CD PROGRAMS To use iFIT.com CDs, your portable CD player must be connected to the treadmill. See HOW TO CON- NECT YOUR CD PLAYER TO THE TREADMILL on page 11. Follow the steps below to use an iFIT.com CD program. Insert the key into the console.
HOW TO USE THE MAINTENANCE MODE The console features a maintenance mode that allows you to access information and to view and change var- ious default settings. Follow the steps below to use the maintenance mode. Insert the key into the console. Refer to GETTING STARTED on page 14.
24 Press the ENTER AGE/WT button again to check for system errors. If there are no system errors, the words NO SYS- TEM ERRORS will appear in the main display. If the words LUBRICATE DECK appear in the main display, the walking platform should be checked for adequate lubricant.
Press the ENTER AGE/WT button again and delete or add TV channels. After all valid TV channels have been stored in the console’s memory, you can delete unwanted channels or add other channels. To delete or add a channel, first press the CHANNEL + and – but- tons until the channel appears in the main display.
26 FEATURES OF THE CONSOLE The state-of-the-art Workout TV console offers an im- pressive array of features to make your workouts more effective and enjoyable. When the manual mode of the console is selected, the speed and incline of the treadmill can be changed with a touch of a button.
HOW TO USE THE WORKOUT TV CONSOLE The Workout TV console offers exactly the same fea- tures as the Basic console, but also incorporates a built-in personal TV. Note: The console has the capa- bility to find and store in memory all of the valid TV channels in your area.
28 NOTES.
29 Regular maintenance is necessary for optimal performance and long treadmill life. Please read and follow all instructions below. If the treadmill is not maintained as described, components may wear excessively and the treadmill may be damaged. If you have questions about maintenance, please contact your distributor.
TURNING THE WALKING PLATFORM Both sides of the walking platform are designed to be used as walking surfaces. Inspect the walking platform peri- odically for wear. If there is any wood showing through the phenolic coating, or if the surface is damaged, the walking platform should be turned over.
31 Photocopy this form and use it to record the preventive maintenance performed on the treadmill. Each copy of the form can be used for six months (26 weeks). When maintenance is performed, write the date in the appropriate spaces. Make sure to perform each maintenance procedure as described on pages 29 and 30.
S IX - MONTH P REVENTIVE M AINTENANCE R ECORD 32 Photocopy this form and use it to record the preventive maintenance performed on the treadmill. Each copy of the form can be used for six months (26 weeks). When maintenance is performed, write the date in the appropriate spaces.
33 Most treadmill problems can be solved by following the steps outlined in this section. Find any symptoms that apply, and follow the steps listed. If further assistance is needed, please contact your distributor. 1. SYMPTOM: THE POWER DOES NOT TURN ON a.
34 4. SYMPTOM: THE WALKING BELT IS OFF-CENTER a. If the walking belt has shifted to the left: Remove the key and unplug the power cord. Using the included allen wrench, turn the roller adjustment bolts in the directions shown, 1/4 of a turn each. Be careful not to overtighten the walking belt.
35 EXERCISE STEPS The following nine steps for designing your exercise program were developed by exercise physiologists at NordicTrack. The actual exercise you perform is only a part of a safe and effective training program. There are many other aspects to developing a life-long commitment to physical fitness.
36 Warm up before you begin. A warm-up routine prepares your body and mind for vigorous exercise. It also helps provide insur- ance against injury and soreness. Warm up with two to five minutes of slow exercise, at minimal in- tensity. Stretch after your warm-up.
37 Get fit with NordicTrack Effective aerobic exercise has three major compo- nents: frequency , intensity , and time : Frequency —Three to five workouts per week are recommended.
38 WORKOUT PROGRAMS The Health level typically lasts four to six weeks. At this level you should be concerned with slowly improv- ing your fitness level and endurance. Take it slowly. Set mini-goals for yourself. You may want to begin your fitness routine with three or four short, 5- or 10-minute workouts in a day.
39 To locate the parts listed below, refer to the EXPLODED DRAWING on pages 40 and 41. Key No. Qty. Description Key No. Qty. Description Key No. Qty. Description 1 1 Motor Hood 2 2 Hood Screw 3 2 Sens.
40 68 100 98 89 88 86 85 103 102 107 60 37 63 97 90 99 96 96 96 96 95 93 90 91 93 99 11 4 124 124 122 122 11 7 100 45 101 94 29 87 92 92 92 92 92 92 92 92 92 92 93 99 99 59 44 44 44 125 48 11 8 E XPLO.
41 7 9 74 74 120 9 7 1 2 2 74 13 108 20 21 34 35 36 39 38 55 40 47 49 41 43 78 78 31 56 54 26 42 30 24 25 33 32 23 42 6 17 74 58 108 7 9 7 5 76 77 78 6 80 82 81 70 75 79 82 83 80 78 77 84 5 6 10 11 74.
42 To order replacement parts, please contact your distributor. Be prepared to give the following information: • The MODEL NUMBER OF THE PRODUCT (see the front cover of this manual) • The NAME OF .
デバイスNordicTrack 9600の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
NordicTrack 9600をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはNordicTrack 9600の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。NordicTrack 9600の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。NordicTrack 9600で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
NordicTrack 9600を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はNordicTrack 9600の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、NordicTrack 9600に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちNordicTrack 9600デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。