NordicTrackメーカーC2400 30703.0の使用説明書/サービス説明書
ページ先へ移動 of 36
USER'S MANUAL CAUTION Read all precautions and instruc - tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal Model No. 30703.0 Serial No. Write the serial number in the space above for future reference.
T ABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. Before beginning any exercise program, con- sult your physician. This is especially impor- tant for persons over the age of 35 or per- sons with pre-existing health problems. 2. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions.
2 1. Do not attempt to raise, lower, or move the treadmill until it is properly assembled. (See ASSEMBLY on page 6, and HOW TO FOLD AND MOVE THE TREADMILL on page 25.) You m ust be able to safely lift 45 lbs. (20 kg) to r aise, lower, or move the treadmill.
Thank you for selecting the revolutionary NordicTrack ® C 2400 treadmill. The C2400 treadmill offers a selec- tion of features designed to make your workouts at home more enjoyable and effective. A nd when you’re not exercising, the unique C2400 trea dmill can be f olded up, requiring less than half the floor space of other treadmills.
1. Make sure that the power cord is unplugged. With the help of a second person, carefully tip the treadmill onto its side as shown. Partially fold the Frame (55) so that the treadmill is more sta- ble. Do not fully fold the Frame until the treadmill is completely assembled.
7 2. Attach two Base Pads (81) to the base of the Uprights (85) in the indicated locations with two 1 " Tek Screws (82). 85 81 8 2 82 2 3. With the help of a second person, carefully tip the treadmill onto its other side as shown. Partially fold the Frame (55) so that the treadmill is more stable.
8 5. Remove the plastic ties from the ends of the Latch Assembly (76). Orient the Latch Assembly (76) so that the large b arrel and the knob are in the positions shown; make sure that all of the holes are aligned (see the inset drawings).
9 9. Remove the indicated 3/4" Screw (7) from the right Handrail (70). See the inset drawing. Slide the Right Upright Sleeve (9) up to the console assembly. Attach the Right Upright Sleeve with two 1" Tek Screws (82) and the 3/4" Screw (7) as shown.
10 1. Make sure that the power cord is unplugged. Remove the indicated Screws (99) from the back of the Console Base (98). 2. While a second person holds the Console (105), connect the wire on the receiver (A) to the indi- cated wire extending from the Console.
1 1 OPERA TION AND ADJUSTMENT T HE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- i cone spray or other substances to the walking b elt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.
12 FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features designed to make your workouts more effec - tive and enjo yable. When the manual mode of the con- sole is selected, the speed and incline of the treadmill can be changed with the touch of a butt on.
13 HOW TO TURN ON THE POWER IMPORTANT: If the treadmill has been exposed to c old temperatures, allow it to warm to room tem- perature before turning on the power. If you do not do this, the console displays or other electrical components may become damaged.
14 3. Enter user information. H ighlight the words USER WEIGHT and then press the User/Enter button. Next, press the in- c rease and decrease buttons beside the User/Enter button to enter your weight.
15 HOW TO USE THE MANUAL MODE 1. I nsert the key into the console. S ee HOW TO TURN ON THE POWER on page 13. 2. Personalize console settings if desired. See HOW TO PERSONALIZE CONSOLE SET- TINGS on page 13. 3. Select the manual mode. Each time the key is inserted, the manual mode will be selected.
16 When the manual mode is selected, the console of- fers eight display modes. The display mode that y ou select will determine which workout information is shown. For example, the first display mode s hows only the elapsed time and the distance that you have walked or run.
17 HOW TO USE A CARDIO PROGRAM 1 . Insert the key into the console. S ee HOW TO TURN ON THE POWER on page 13. 2. Personalize console settings if desired. See HOW TO PERSONALIZE CONSOLE SET- TINGS on page 13. 3. Select a cardio program. To select one of the ten cardio program, press the Programs button repeatedly.
18 If the third display mode is selected, the display will show an animation of a runner. At the end of the first one-minute segment of the program, a series of tones will sound. If a di ffe re nt speed setting is programmed for the second seg- ment, the speed setting will move along the bottom of the display to alert you.
19 HOW TO USE A PULSE PROGRAM Follow the steps below to use a pulse program. 1. Put on the optional chest pulse sensor. Note: You must wear the optional chest pulse sen- sor to use a pulse program. 2. Insert the key into the console. See HOW TO TURN ON THE POWER on page 13.
20 During each one-minute segment of the program, the console will compare your heart rate to the cur- r ent target heart rate setting. If your heart rate is too far below or above the target heart ra.
21 HOW TO CREATE A RECORD PROGRAM 1 . Insert the key into the console. S ee HOW TO TURN ON THE POWER on page 13. 2. Personalize console settings if desired.
22 HOW TO USE A RECORD PROGRAM 1. I nsert the key into the console. S ee HOW TO TURN ON THE POWER on page 13. 2. Personalize console settings if desired.
23 HOW TO USE AN IFIT CARD 1 . Insert the key into the console. S ee HOW TO TURN ON THE POWER on page 13. 2. Personalize console settings if desired. See HOW TO PERSONALIZE CONSOLE SET- TINGS on page 13.
24 HOW TO USE THE STEREO SOUND SYSTEM T o play music or audio books through the console’s stereo speakers, you must connect your MP3 player or C D player to the console. Locate the stereo audio cable below the speakers on the console, and plug it into a jack on your MP3 player or CD player.
25 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may damage the t readmill. Remove the key and unplug the power cor d. CAUTION: You must be able to safely lift 45 lbs.
26 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand. Pull the latch knob to the left and hold it. It may be neces- sary to push the frame forward as you pull the knob to the left. Pivot the frame downward and release the latch knob.
27 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
28 Locate the Reed Switch (22) and the Magnet (18) on the left side of the Pulley (17). Turn the Pulley until the M agnet is aligned with the Reed Switch. M ake sure that the gap between the Magnet and the Reed S witch is about 1/8 in. (3 mm). I f necessary, move the Reed Switch slightly using a slotted screwdriver.
29 These guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consult your physician. Remember, proper nutrition and adequate rest are essential for successful results.
30 P ART LIST—Model No. 30703.0 R0807A To locate the parts listed below, see the EXPLODED DRAWING near the end of the manual. Key No. Qty. Description Key No.
31 Key No. Qty. Description Key No. Qty. Description 103 1 Key/Clip 104 4 Isolator Screw/Bracket Screw 105 1 Console 106 1 Idler Pulley Nut 107 1 Idler Pulley Washer 1 08 1 Front Roller Nut 109 7 Latc.
19 18 14 10 1 1 12 13 5 62 15 55 5 16 1 1 17 14 10 13 12 49 62 57 57 64 23 56 104 104 28 6 27 39 29 39 27 3 61 61 104 1 2 2 2 104 54 2 2 2 3 2 2 60 102 60 102 76 109 20 109 20 4 8 8 8 8 8 4 8 8 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 EXPLODED DRA WING A—Model No.
33 25 26 31 37 36 3 3 7 7 7 34 3 4 3 4 38 20 19 37 40 41 32 45 42 43 51 42 50 52 23 47 94 48 53 96 23 24 24 21 22 58 69 74 75 20 59 66 107 106 68 35 44 20 32 7 32 32 32 108 42 23 32 7 EXPLODED DRA WING B—Model No.
81 82 85 84 73 81 82 81 82 30 80 72 67 97 87 87 91 80 81 82 30 11 0 97 91 73 67 88 86 84 92 101 101 92 63 7 63 7 7 9 82 82 77 72 89 65 65 89 65 65 81 46 79 81 46 79 11 0 34 EXPLODED DRA WING C—Model No.
100 103 98 105 78 70 90 78 95 99 7 99 9 9 99 99 83 99 99 99 99 99 90 7 7 7 7 9 3 83 83 90 35 EXPLODED DRA WING D—Model No. 30703.0 R0807A.
Part No. 252971 R0807A Printed in USA © 2007 ICON IP, Inc. LIMITED W ARRANTY ICON OF CANADA, INC. (ICON) warrants this product to be free from defects in workmanship and ma- terial, under normal use and service conditions. The frame is warranted for ten (10) years after the date of purchase.
デバイスNordicTrack C2400 30703.0の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
NordicTrack C2400 30703.0をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはNordicTrack C2400 30703.0の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。NordicTrack C2400 30703.0の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。NordicTrack C2400 30703.0で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
NordicTrack C2400 30703.0を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はNordicTrack C2400 30703.0の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、NordicTrack C2400 30703.0に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちNordicTrack C2400 30703.0デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
