NordicTrackメーカーNTL12944の使用説明書/サービス説明書
ページ先へ移動 of 34
USER'S MANUAL CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal Model No. NTL12944 Serial No. Find the serial number in the location shown below.
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side.
22. When using iFIT.com CDs and videos, an electronic “chirping” sound will alert you when the speed and/or incline of the treadmill is about to change. Always listen for the “chirp” and be prepared for speed and/or in - cline changes. In some instances, the speed and/or incline may change before the per- sonal trainer describes the change.
Thank you for selecting the revolutionary NordicTrack ® C2300 treadmill. The C2300 treadmill combines ad - vanced technology with innovative design to help you get the most from your exercise program in t he conve - nience of yo ur ho me.
ASSEMBL Y Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
78 77 Thick Side Console Assembly 69 77 118 4 7 5. With the help of a second person, carefully tip the Uprights (69) down to the position shown. Make sure that the Extension Legs (102) remain in the Uprights. Attach each Extension Leg (102) with two 1” Tek Screws (47) and a Base Pad (99) as shown.
8 If you purchase the optional chest pulse sensor (see page 24), follow the steps below to install the receiver and the short jumper wire included with the chest pulse senso r. Make sure that the power cord is unplugged. See step 6 above. Remove the two 3” Bo lts (1 25) , t he two Handrail Washers (124), and the Upper Handrail (122).
9 OPERA TION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM , a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat - form.
10 FEATURES OF THE CONSOLE The advanced console offers an impressive array of features designed to help you get the most from your exercise. When the manual mode is selected, the speed and incline of the treadmill can be changed with the t ouch of a button.
1 1 HOW TO TURN ON THE POWER Plug in the power cord. See page 9. Move the reset/off circuit breaker to the reset position. Locate the reset/off cir - cuit breaker on the treadmill near the power cord. Make sure that the circuit breaker is in the reset position.
Change the incline of the treadmill as desired. To change the incline of the treadmill, press the Inclin e buttons. Each time a button is pressed, the incline will change by 0.5%. To change the incline setting quickly, press the 1-step Incli ne buttons .
13 To reset the displays, press the Stop button, re- move the key, and then reinsert the key. Measure your heart rate if desired. To measure your heart rate, stand on the foot rails and place your hands on the metal contacts on the handgrip pulse sensor.
14 When only three seconds remain in the first seg- ment of t he progr am, both the Current Segment column and the column to the right will flash and a series of tones will sound. If the speed and/or in- cline of the treadmill is about to change, the Speed display and/or the Incline/Heart Rate display will flash to alert you.
15 HOW TO CREATE CUSTOM PROGRAMS Insert the key fully into the console. See HOW TO TURN ON THE POWER on page 11. Select one of the custom programs. When the key is inserted, the manual mode will be selected. To select a custom program, press the Select Pr og ra m button repeatedly until the Learn 1 or Learn 2 indicator lights.
16 HOW TO USE CUSTOM PROGRAMS Insert the key fully into the console. See HOW TO TURN ON THE POWER on page 11. Select one of the custom programs. When the key is inserted, the manual mode will be selected. To select a custom program, press the Select Pr og ra m button repeatedly until the Learn 1 or Learn 2 indicator lights.
17 Follow your progress with the displays. See step 5 on page 12. Measure your heart rate if desired. See step 6 on page 13. Turn on the fans if desired. See step 7 on page 13. When you are finished exercising, remove the key. See step 7 on page 14. HOW TO USE HEART RATE PROGRAMS Follow the steps below to use a heart rate program.
18 Enter your age. When a heart rate pro- gram is selected, the letters “AGE” and the current age setting will begin to flash in the Speed display. You must enter your age to use a heart rate program. If you have already entered your age, press the Start button (pressing the Start button at this time will not start the program).
HOW TO CONNECT THE TREADMILL TO YOUR CD PLAYER, VCR, OR COMPUTER To use iFIT.com CDs , the treadmill must be con- nected to your portable CD player, portable stereo, home stereo, or computer with CD player. See pages 19 and 20 for connecting instructions.
20 HOW TO CONNECT YOUR HOME STEREO Note: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is being used, see instruction B. A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord.
21 HOW TO CONNECT YOUR VCR Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 20.
22 If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the Speed or Incline buttons on the console. However, when the next “chirp” is heard, the speed and/or incline will change to the next settings of the CD or video program.
23 HOW TO USE PROGRAMS DIRECTLY FROM OUR WEB SITE To use programs from our Web site, the treadmill must be connected to your home computer. See HOW TO CONNECT YOUR COMPUTER on page 20. In addition, you must have an internet connection and an internet service provider.
THE INFORMATION MODE/DEMO MODE The console features an information mode that keeps track of the total number of miles that the walking belt has moved and the total number of hours that the treadmill has been operated. The information mode also allows you to switch the console from miles to kilometers.
HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- manently damaged. Remove the key and unplug the power cord.
26 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the latch knob to the left and hold it. Pivot the treadmill down until the frame is past the pin on the latch knob. 2.
27 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-888-825-2588, Monday through Friday, 6 a.
28 PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 9. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged.
29 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
P ART LIST—Model No. NTL12944 R0304A To locate the parts listed below, see the EXPLODED DRAWING attached in the center of this manual. Key No. Qty. Description Key No.
Key No. Qty. Description Key No. Qty. Description 101 1 Motor Washer 102 2 Extension Leg 103 2 Extension Cap 104 2 Incline Warning Decal 105 1 Right Foam Trim 106* 2 Extension Leg Assembly 107 2 Fan 1.
85 86 45 46 45 46 30 29 28 27 27 27 27 27 135 133 132 134 131 132 133 131 136 130 31 130 137 128 129 127 130 128 129 126 1 13 1 13 55 56 44 50 67 67 34 44 34 56 33 33 20 25 101 48 15* 18 16 17 19 22 1.
99 47 103 102 106* 108 82 76 76 90 89 100 91 92 94 93 99 47 47 99 47 103 104 102 106* 99 47 97 98 104 20 95 94 93 47 68 70 71 74 73 72 35 69 84 80* 95 20 66 81 40 107 65 107 1 17 90 90 83 83 90 90 83 .
Part No. 210904 R0304A Printed in USA © 2004 ICON IP, Inc. LIMITED W ARRANTY WHAT IS COVERED—The entire NordicTrack ® C2300 treadmill (“Product”) is warranted to be free of all defects in ma- terial and workmanship. WHO IS COVERED—The original purchaser or any person receiving the Product as a gift from the original purchaser.
デバイスNordicTrack NTL12944の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
NordicTrack NTL12944をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはNordicTrack NTL12944の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。NordicTrack NTL12944の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。NordicTrack NTL12944で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
NordicTrack NTL12944を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はNordicTrack NTL12944の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、NordicTrack NTL12944に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちNordicTrack NTL12944デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。