NordicTrackメーカーNTL77806.0の使用説明書/サービス説明書
ページ先へ移動 of 32
USER'S MANUAL CAUTION Read all precautions and instruc - tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal Model No. NTL77806.0 Serial No. Find the serial number in the location shown below.
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. It is the responsibility of the owner to ensure t hat all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side.
2 2. When folding or moving the treadmill, make sure that the storage latch is fully closed. 23. When using iFIT cards, an electronic “chirp- i ng” sound will alert you when the speed a nd/or incline of the treadmill is about to change. Always listen for the “chirp” and be prepared for speed and/or incline changes.
Thank you for selecting the revolutionary NordicTrack ® A 2250 treadmill. The A2250 treadmill offers a selection of features designed to make your workouts at home more enjoyable and effective. And wh en you’re not ex- ercising, the unique A2250 trea dmill can be folded up, r equiring less than half the floor space of other tread- mills.
1. Make sure that the power cord is unplugged. With the help of a second person, carefully tip the treadmill onto its side as shown. Partially fold the Frame (55) so the treadmill is more stable. Do not fully fold the treadmill until it is com- pletely assembled.
7 2. Insert the other Extension Leg (97) into the indi- cated bracket on the base of the Uprights (85) as s hown. A ttach the Extension Leg (97) with two Extension Leg Bolts (87), two Star Washers (67), and two Extension Leg Nuts (106) as shown. Firmly tighten the Extension Leg Bolts.
8 7. Make sure that all parts are properly tightened before you use the treadmill. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 23). To protect the floor or carpet from damage, place a mat under the treadmill.
OPERA TION AND ADJUSTMENT T HE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- i cone spray or other substances to the walking b elt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.
10 FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features designed to help you get the most from your worko uts. When the manual mode of the console is se- lected, the speed and incline of the treadmill can be changed with the touch of a button.
1 1 HOW TO TURN ON THE POWER N ote: To prevent damage to the walking platform, always wear clean shoes while using the treadmill. Plug in the power cord (see page 9). Next, locate the reset /off circuit breaker on the treadmill frame near the power cord.
12 The Training Zones display —This display i ndicates the approxi- mate intensity level of y our exercise. If five or six indicators are lit, for example, the display shows that your pace is ideal for aerobic exercise.
13 Turn on the fan if desired. T o turn on the fan at low speed, press the Fan button; the word “LOW” will appear in the matrix f or a few seconds. To turn on the fan at high speed, press the button a second time; the word “HIGH” will appear in the matrix.
14 H OW TO USE A PRESET PROGRAM I nsert the key into the console. See HOW TO TURN ON THE POWER on page 11. Select one of the preset programs. To select one of the six preset programs, press the Program Select but- ton repeatedly until “P 1,” “P 2,” “P 3,” “P 4,” “P 5,” or “P 6” appears in the Calories/Pulse display.
15 Follow your progress with the displays. S ee step 5 on page 11. M easure your heart rate if desired. See step 6 on page 12. Turn on the fan if desired. See step 7 on page 13. When you are finished exercising, remove the key from the console. When the program ends, make sure that the in- cline of the treadmill is at the lowest setting.
16 H OW TO USE A CUSTOM PROGRAM Insert the key into the console. S ee HOW TO TURN ON THE POWER on page 11. Select one of the custom programs. To select a custom pro- gram, press the Program Se le ct button repeatedly until “P 7” or “P 8” ap- pears in the Calories/Pulse display.
17 H OW TO USE AN IFIT CARD Insert the key into the console. S ee HOW TO TURN ON THE POWER on page 11. Insert an iFIT Card and select a program. To use an iFIT program, insert an iFIT Card into the iFIT slot; make sure that the iFIT Card is ori- ented so the metal contacts are face-down and are inserted into the iFIT slot.
18 THE USER’S MODE T he console features a user’s mode that keeps track of the total number of miles that the walking belt has m oved and the total number of hours that the treadmill has been operated. The user’s mode also allows you to select miles or kilometers as the unit of measure- ment and to turn on and turn off the demo mode.
19 THE OPTIONAL CHEST PULSE SENSOR A n optional chest pulse sensor offers hands-free oper- ation as it monitors your heart rate during your work- o uts. T o purchase the optional chest pulse sensor, call the toll-free telephone number on the front cover of this manual.
20 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- m anently damaged. Remove the key and unplug the power cord.
21 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the latch knob to the left and hold it. Pivot the frame down until it is past the pin on the latch knob. 2. Hold the metal frame firmly with both hands , and lower it to the floor.
22 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
23 Locate the Reed Switch (22) and the Magnet (18) on the left side of the Pulley (17). Turn the Pulley until the M agnet is aligned with the Reed Switch. M ake sure that the gap between the Magnet and the Reed S witch is about 1/8”. I f necessary, move the Reed Switch slightly using a slotted screwdriver.
24 PROBLEM: The incline of the treadmill does not change correctly S OLUTION: a . With the key in the console, press one of the Incline buttons. W hile the incline is changing, re- move the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the m aximum incline level and then return to the minimum level.
25 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
26 P ART LIST—Model No. NTL77806.0 R0606A To locate the parts listed below, see the EXPLODED DRAWING starting on page 28. Key No. Qty. Description Key No.
27 Key No. Qty. Description Key No. Qty. Description 103 1 Key/Clip 104 4 Isolator Screw/Bracket Screw 105 1 Console 106 4 Extension Leg Nut # 1 12" Blue Wire, 2F # 1 8" Blue Wire, M/F # 1 8" Green Wire, F/Ring # 1 4" Red Wire, M/F # 1 User's Manual #These parts are not illustrated.
19 18 14 10 1 1 12 13 5 62 60 15 55 5 16 1 1 17 14 10 13 12 60 49 62 57 57 64 23 56 104 104 28 6 27 39 29 39 27 3 4 8 8 8 9 7 61 61 104 1 2 2 2 32 104 54 4 8 8 8 2 2 2 3 2 2 32 102 102 EXPLODED DRA WING—Model No.
29 25 26 31 37 36 33 7 7 7 34 34 3 4 23 42 38 20 19 37 40 41 7 7 7 45 7 43 51 23 50 52 23 47 7 94 48 65 53 96 23 24 24 21 22 58 69 74 75 20 59 66 68 7 7 35 44 20 Part 2 of 4.
93 100 103 98 1 05 78 70 90 78 95 99 7 99 9 9 99 99 83 83 83 99 99 99 99 99 86 46 90 7 7 7 7 91 91 Part 3 of 4 30.
81 82 85 76 77 84 73 81 82 81 82 30 80 72 71 67 72 7 1 72 67 72 97 87 87 67 106 79 79 92 7 7 80 81 82 101 101 101 81 82 101 30 67 73 84 97 89 88 88 89 63 63 101 106 81 82 31 Part 4 of 4.
Part No. 239841 R0606A Printed in USA © 2006 ICON IP, Inc. LIMITED W ARRANTY WHAT IS COVERED—The entire NordicTrack A2250 treadmill (“Product”) is warranted to be free of all defects in mate- r ial and workmanship. WHO IS COVERED—The original purchaser or any person receiving the Product as a gift from the original purchaser.
デバイスNordicTrack NTL77806.0の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
NordicTrack NTL77806.0をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはNordicTrack NTL77806.0の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。NordicTrack NTL77806.0の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。NordicTrack NTL77806.0で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
NordicTrack NTL77806.0を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はNordicTrack NTL77806.0の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、NordicTrack NTL77806.0に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちNordicTrack NTL77806.0デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
