AsusメーカーAK34の使用説明書/サービス説明書
ページ先へ移動 of 42
5U T ower Chassis Kit AK34 User Guide.
ii Disclaimer/Copyrights Product Name: ASUS AK34 Manual Edition: First edition V1 (E1329) Release Date: June 2003 Copyright © 2003 ASUST eK COMPUTER INC.
iii Contents Disclaimer/Copyrights ..................................................................... ii Contents ......................................................................................... iii Notices ................................
iv Contents 2.6.2 Installing a long expansion card .......................... 2-17 2.6.3 Removing an expansion card .............................. 2-18 2.7 Removable components ................................................... 2-19 2.7.1 Chassis fan .
v Notices Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
vi Safety information Electrical Safety Operation Safety IMPORT ANT • Before installing or removing signal cables, ensure that the power cables for the system unit and all attached devices are unplugged. • T o prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
vii About this guide Contents This guide contains the following parts: 1. Chapter 1: System overview This chapter describes the general features of the AK34 barebone server .
viii ASUS Cont act Information ASUST eK COMPUTER INC. (Asia-Pacific) Address: 150 Li-T e Road, Peitou, T aipei, T aiwan 1 12 General T el: +886-2-2894-3447 General Fax: +886-2-2894-3449 General Email: info@asus.
1-1 ASUS AK34 chassis kit This chapter describes the general features of the AK34 chassis kit. It includes sections on front panel, rear panel, and internal features.
Chapter 1: Product introduction 1-2 1 . 1 Package contents 1.1.2 Standard items 1. Chassis kit including: • power supply unit(s) • CD-ROM drive • floppy disk drive • internal HDD trays (5 units) • chassis fan • chassis roller wheels 2. Cables • chassis intrusion cable • power cable 3.
ASUS AK34 chassis kit 1-3 1 .2 Over view The AK34 chassis kit is designed for easy configuration, flexibility , and high reliability . The chassis may be set up as standalone or rack-mount.
Chapter 1: Product introduction 1-4 1 .3 Fr ont panel features The AK34 chassis kit displays a stylish front bezel with lock. The bezel covers the system components on the front panel and serves as security . Open the bezel to access the front panel components.
ASUS AK34 chassis kit 1-5 1 .4 Rear panel features The rear panel includes a slot for the motherboard rear I/O ports, six full- length expansion slots, a chassis lock and intrusion switch, a vent for the system fan, and either two redundant power supply modules or a standard power supply module.
Chapter 1: Product introduction 1-6 1 .5 Internal features The chassis kit includes the basic components as shown in the picture below . System with standard power supply module The power supply area differs depending on the power supply module that came with the server you purchased.
ASUS AK34 chassis kit 1-7 1 .6 LED information The following table describes the LED indicators on the server front and rear panels. LED Status Description Power LED ON System power ON Blinking Suspen.
Chapter 1: Product introduction 1-8.
2-1 ASUS AK34 chassis kit This chapter describes the internal hardware components and provides the installation procedures for additional system components.
Chapter 2: Hardware setup 2-2 2. 1 Preparation Before proceeding, prepare everything that you might need to facilitate installation. 2.1.1 T ools to use 1. Phillips head screw driver 2. Flat head screw driver 2.1.2 System components and devices to install The following items are the basics that you need to install into the chassis kit.
ASUS AK34 chassis kit 2-3 2.2 Removing and installing the side cover 2.2.1 Removing the cover 1. Loosen the two thumb screws that secure the side cover . 2. Slide the side cover for about half an inch toward the rear until it is disengaged from the chassis.
Chapter 2: Hardware setup 2-4 2.3 Motherboard ins tallation 2.3.1 Motherboard dimensions This chassis kit supports an ASUS motherboard that measures 12x12 inches (30.5 x 30.5 cm). Motherboards of smaller sizes will fit into the system chassis. Refer to the motherboard user guide for more information on the system requirements.
ASUS AK34 chassis kit 2-5 2.3.2 Placement direction and screw holes Align the holes on the motherboard (indicated by white circles in the picture below) to the corresponding standoffs on the motherboard metal plate inside the chassis. Place screws through the designated holes to secure the motherboard to the chassis.
Chapter 2: Hardware setup 2-6 2.3.3 Installing the motherboard 1. Remove the temporary metal shield on the rear panel (beside the chassis fan) that covers the rear I/O slot opening. 2. Install the rear I/O shield that came with the motherboard package.
ASUS AK34 chassis kit 2-7 2.4 Inst alling 5.25-inch drives Three 5.25-inch drive bays are located on the upper front part of the chassis. A CD-ROM drive that comes standard with the system package occupies the uppermost bay (labeled 1) . The two lower bays (labeled 2 and 3) are available for additional 5.
Chapter 2: Hardware setup 2-8 2.4.2 Installing a 5.25-inch drive T o install a 5.25-inch drive: 1. Remove the metal cover of the bay where you wish to install the drive by pulling the cover outward. 2. Pull and swing the left edge of the front panel outward.
ASUS AK34 chassis kit 2-9 The drive is in place when the screw holes on the drive align with the holes on the side of the bay . 2. From the side of the drive bay , unlock and remove the screwless drive bay lock by turning the knob 45º counter-clockwise until it clicks on the reference point near the “unlocked icon.
Chapter 2: Hardware setup 2-10 5. Secure the drive to the bay using the screwless drive bay lock that you removed earlier . a. Match the two pegs on the lock to the holes on the drive bay . b. T urn the knob 45 º clockwise until it clicks on the reference point near the “ locked icon.
ASUS AK34 chassis kit 2-11 7. Re-install the front panel assembly (front bezel and front panel cover). a. Insert the four hinge-like tabs to the holes on the right edge of the chassis. b. Swing the front panel to the left and fit the four (4) hooked tabs to the left side of the chassis until the tabs snap in place.
Chapter 2: Hardware setup 2-12 2.5 Inst alling hard disk dr ives The five internal hard disk drive (HDD) bays include removable trays for installing 3.5-inch hard disk drives. Y ou need to remove the side cover to access the drive bays. See section “2.
ASUS AK34 chassis kit 2-13 4. The right side of the tray has a spring-lock. Pull the right side of the tray and match its pegs to the holes on the right side of the drive. Return the tray handle in place to secure the drive. Make sure to place the tray in the correct orientation as shown.
Chapter 2: Hardware setup 2-14 6. Connect one end of a 40-pin IDE cable to the IDE connector on the drive. Connect the other end to an availble IDE connector on the motherboard. 6 7 Each drive tray has a designated IDE cable to ensure better air flow and cable placement.
ASUS AK34 chassis kit 2-15 2.6 Inst alling or removing an expansion card The chassis is designed with a screwless expansion slot frame on the rear panel. This design feature allows you to install or remove an expansion card in less steps. 2. Slide out the metal bracket opposite the PCI slot where you wish to install the expansion card.
Chapter 2: Hardware setup 2-16 4 . Press the end of the card lock marked “ LOCK ” to secure the card on the slot. A light click indicates that the card is locked in place. 3. Install the expansion card making sure that it is properly seated on the slot.
ASUS AK34 chassis kit 2-17 2.6.2 Installing a long expansion card If you are installing a long expansion card, such as some types of RAID cards, use the plastic card support located near the front of the chassis (under the backplane board) to keep the expansion cards firmly seated on the slots.
Chapter 2: Hardware setup 2-18 2.6.3 Removing an expansion card T o remove an expansion card: 1. Release the card lock. a. Press the card lock lever . b. The card lock flips up. Card lock Card lock lever 1a 1b 2. Pull out the card from the PCI slot. 3.
ASUS AK34 chassis kit 2-19 2.7 Removable components When installing or removing system devices, you may need to remove previously installed components. This section describes how to remove these components. 2.7.1 Chassis fan T o remove the 12-cm chassis fan: 1.
Chapter 2: Hardware setup 2-20 2.7.2 Roller wheels The chassis comes with four roller wheels for convenient transport. Each wheel has a brake lock to stabilize the chassis in place. T o remove the chassis wheels: 1. Lay the chassis in its side. 2. Use a Phillips screwdriver to remove the screws that secure the wheels to the bottom of the chassis.
ASUS AK34 chassis kit 2-21 2.7.3 Power supply modules The redundant power model has two power supply modules. These hot swap power modules can be removed or installed while the system is powered ON. Only one power module is necessary to provide power to the system.
Chapter 2: Hardware setup 2-22 2.8 Connecting the cables The chassis includes power and signal cables that you need to connect to the motherboard and to the devices that you will install. Most of the cables for the chassis kit are already connected upon shipment.
A-1 ASUS AK34 chassis kit This appendix lists the common problems that you may encounter while using the server . It lists the possible causes of the problems and offers solutions. Y ou may refer to this part and try to solve simple problems before calling customer support.
Appendix: T roubleshooting A-2 A. 1 Simple fixes The power LED on the server or on the monitor do not light up 1. Check the power cable connection on the system rear panel if properly connected. 2. Make sure that the power cables are connected to a grounded power outlet.
ASUS AK34 chassis kit A-3 Problem Action The system continuously beeps after it was turned on 1. Check the memory modules and make sure you installed the DIMMs the system supports. 2. Make sure that the DIMMs are properly installed on the sockets. 3. Check if it has a VGA ouput.
Appendix: T roubleshooting A-4.
デバイスAsus AK34の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Asus AK34をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAsus AK34の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Asus AK34の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Asus AK34で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Asus AK34を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAsus AK34の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Asus AK34に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAsus AK34デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
