OceメーカーOP14の使用説明書/サービス説明書
ページ先へ移動 of 16
1.1.1. Océ OP14 Printing System Set-up O p erations Guide Education Services Océ Operations Guide E n g l i s h v e r s i o n.
i T rademark Information • PRESCRIBE is a registered trademark of K yocera Corporation. • PRESCRIBE 2e and KPDL2 are trademarks of Kyocera Corporation. • MS-DOS, Windows and Windows NT are trademarks of Microsoft Corporation. • PCL and PJL are registered trademarks of Hewlett-P ackard Compan y .
ii IBM PROGRAM LICENSE A GREEMENT THE DEVICE Y OU HA VE PURCHASED CONT AINS ONE OR MORE SOFTW ARE PROGRAMS (“PR OGRAMS”) WHICH BELONG T O INTERNA TIONAL BUSINESS MA CHINES CORPORA TION (“IBM”). THIS DOCUMENT DEFINES THE TERMS AND CONDITIONS UNDER WHICH THE SOFTW ARE IS BEING LICENSED TO Y OU BY IBM.
iii T ypeface T rademar k Acknowledgement All resident fonts in this printer are licensed from Agf a Cor poration. Helvetica, P alatino and Times are registered trademarks of Linotype-Hell A G. ITC A vant Garde Gothic , ITC Bookman, ITC ZapfChancer y and ITC Zapf Dingbats are registered trademarks of Inter national T ype-f ace Cor poration.
iv About this Instruction Handbook This Instruction Handbook <Set-up Edition> is meant to be read when the Printer Board is installed in your copier and the copier is to be used mainly as a local printer . It contains e xplanations on set-up procedures for using the copier as a printer .
v Getting connected When connecting the printer directly to your computer (with a parallel cable) ... Parallel cable 1 Connecting the printer directly to your computer with a parallel cable ...................................... Page 3 2 Installing the printer driver into your computer .
T ab le of contents 1. Preparations ............................................................................................................. 1 1-1 Accessories .......................................................................................
1 1. Preparations 1-1 Accessories • 1 CD-ROM • This Instruction Handbook 1-2 Required items • Parallel cable 1-3 Name of par ts (main body) 1 Parallel interface connector Connect a bi-directional parallel cable here. 2 Memory Card slot Insert the optional Memory Card here.
2 1. Preparations 1-4 Name of parts (operation panel) Inch specifications 129% 200% 50% 100% 78% Start Stop/ Reset Memory Over f low/ Data Error Add Toner Paper Select AutoExp .
3 2. Set-up 2-1 Connecting the printer cable CAUTION: AL W A YS tur n the main switch to the printer OFF (O) BEFORE connecting the printer cable. T urn the main switch located on the right side of the printer OFF (O) and then turn the power off to your computer as well.
4 2. Set-up 2-3 Netw ork (TCP/IP) settings When the optional Network Card is installed and this machine is to be used as a network printer, it is necessary to set the corresponding IP address f or the pr inter . Notes • The IP address that should be registered here will diff er depending upon your network environment.
5 3. T r oubleshooting 3-1 Canceling printing Perform the following procedure when you want to stop printing or you want to clear data. IMPORT ANT! • By performing this operation you will be canceling ALL print jobs that are currently w aiting in the pr inter ’ s memor y to be printed.
6 3. T roub leshooting 3-2 When an err or code or error messages appear s… If an error code appear on the operation panel, first check the following tables for cause of the trouble and then perform the corresponding procedure.
7 3. T roubleshooting Error code E60 E70 E71 E72 E73 E80 E82 E83 EF1 EF2 Procedure A read- or write-error has occurred on the RAM disk. Press the Star t [GO] key to er ase the error indication. A read- or write-error has occurred in the Memory Card. Press the Start [GO] key to erase the error indication.
8 3. T roub leshooting 3-3 Basic tr oubleshooting chart If you e xperience trouble while you are using this machine as a printer , ref er to the table below to perf or m minor adjustments. If troub le persists, contact your service representative or an authoriz ed ser vice center.
9 4. Specifications CPU ................................................................... PowerPC 405 (200MHz) Printing Speed ................................................... 15, 18 ppm copier : 18 pages/min (A4 [8 1/2" x 11"]) Printing Resolution .
デバイスOce OP14の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Oce OP14をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはOce OP14の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Oce OP14の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Oce OP14で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Oce OP14を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はOce OP14の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Oce OP14に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちOce OP14デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。