Onkyoメーカー29400468の使用説明書/サービス説明書
ページ先へ移動 of 52
A V Receiv er HT-RC230 Instruction Manual Thank you for purchasing an Onkyo A V Receiv er . Please read this manual thoroughl y before making connections and plugg ing in the unit. Follo wing the in structions in this m anual will enable you to obtain opti mum performance and listening enjoyment from your new A V Receiv er .
2 En Introduction Impor tant Safety Instructions 1. Read these ins tructions. 2. Ke ep these instructions. 3. Heed all warnings. 4. Follo w all instructions. 5. Do not use this apparatus near w ater . 6. Clean only with dry cloth. 7. Do not block an y ventilat ion openings.
3 En Precautions 1. Recording Copyright —Unless it’ s for personal use only , recording cop yrighted ma terial is illegal without the permission of the copyright holder . 2. A C Fuse —The A C fuse inside the unit is not user -ser- viceable. If you cannot turn on the unit, contact your Onkyo de aler .
4 En Supplied Accessories Make sure you hav e the following accessories: * In catalogs and on packaging , the letter at the end of the prod- uct name indicates the color .
5 En Contents Important Safety Instruction s ......................................... 2 Precautions ................................................................ ....... 3 Supplied Accessories ............................................... ......
6 En Features Amplifier • 60 W atts/Channel @ 8 ohms (FTC) • Optimum Gain V olume Circuitry • H.C.P .S. (High Current Po wer Supply) Massi ve High Po wer T ransformer Proces sing • HDMI (V er .1. 4 with Audio Re turn Channel, 3D), Deep- Color , x.
7 En Fr ont & Rear P anels The actual front panel has v ari ous logos printed on it. They are not shown here for clarity . The page numbers in pa rentheses show where you can find th e main e xplanation for each item.
8 En For detailed information, se e th e pages in parentheses. a A and B speaker indicators ( ➔ 10 , 20 ) b A udio input indicators c Listening mode and format indicators ( ➔ 19 , 24 ) d T uning i.
9 En Remote Contr oller For detail ed information, see the pages in parent heses. a ON/ST ANDBY button ( ➔ 18 ) b REMO TE MODE / INPUT SELECT OR bu tt on s ( ➔ 19 ) c TO N E , + and – buttons ( .
10 En About Home Theater Y ou can use two sets of speak ers with the A V receiv er: Speakers A and Speak ers B . Speakers A should be used in your main listeni ng room for up to 5.1-channel playback. * While Speakers B is on, Speakers A is reduced to 2.
11 En Connections Connecting the A V Receiver Speaker Configura tion The follo wing table indicates the channels you should use depending on the number of speakers that you ha ve. For 5.1-channel surround-sound playback, you need fi ve speakers and a po wered subwoofer .
12 En Connecting the Speaker Cab les Screw-type speak er terminals Using Banana Plugs • If you are using banana plugs, tighten th e speaker terminal before inserting the banana plug. • Do not insert the speaker code directly in to the center hole of the speaker terminal.
13 En Connected ima ge with A V components • Before making any A V connections, read th e manuals supplied with your A V components. • Don’t connect the po wer cord until you’ ve comp leted and double-checked all A V connections. • Push plugs in all the way to mak e good connecti ons (loose connecti ons can cause noise or malfunc- tions).
14 En Connect your components to the appropr iate jack s. The default input assi gnments are sho wn below . ✔ : Assignment can be changed ( ➔ 28 ). Refer to “ About HDMI” ( ➔ 48 ) and “Using an p -compatible TV , Player, or Recorder” ( ➔ 49 ).
15 En Connect your components to th e appropriate jacks. The default input assignments are sho wn belo w . ✔ : Assignment can be changed ( ➔ 28 ). ■ How to recor d the video W ith the connections descri bed here, you cannot record the video through the A V rece iver.
16 En W ith u (Remote Interacti ve), you can use the follo wing special functions: ■ System On/A uto P ower On When you start playback on a component connected via u , if the A V receiver is on Standby , it will automati- cally turn on and select th at component as the input source.
17 En The A V recei ver supports se veral conn ection formats for comp atibilit y with a wide range of A V equipment. The format you choose will depend on the fo rmats supported by your components.
18 En T ur ning On & Basic Operations T urning On/Off the A V Receiver T urning On Press ON/ST ANDBY on the fr ont panel. or Press RECEIVER followed by ON/ST ANDBY on the remote co ntroller . The A V rece iv er comes on, the display lights, and the ST ANDBY indicator goes of f.
19 En Basic Operations ■ Operating on the A V receiver ■ Operating with the remo te controller Y ou can display v arious info rmation about the current input source as follows. Tip • Alternativ ely , you can use the A V recei ver’ s DISPLA Y .
20 En Y ou can temporarily mute the output of the A V receiv er. Tip • T o unmute, press MUTING again or adjust the volume. • The Mute function is ca ncelled when the A V receiv er is set to Standb y . W ith the sleep timer , you can set the A V receiv er to turn off aut omatically after a specif ied period.
21 En Listening to the Radio W ith the built-in tuner you can enjoy AM and FM radio stations. Y ou can store your fa vo rite stations as presets for quick selection.
22 En Y ou can store a combination of up to 40 of your fav orite FM/AM radio stations as presets. Selecting Presets Tip • Y ou can also use the remote controller’s number b uttons to select a preset directly . Deleting Pres ets Presetting FM/AM Stations 1 T une into the FM/AM station that you wa nt to store as a pr eset.
23 En Recor ding This section explains ho w to record the selected input source to a component with recording capa bility , and how to record audio and video from different sources. Connecting a Recor ding Component Note • The A V recei ver must be turned on for recording.
24 En Using the Listening Modes See “ About Listening Modes” for detailed information about the listening mod es ( ➔ 24 ). Listening Mode Buttons MO VIE/TV b utton This butto n selects the listening modes intended for use with movies and TV . MUSIC button This butto n selects the listening modes intended for use with music.
25 En ■ Speaker Lay out The illustration sho ws which speakers are acti v ated in each channel. See “Sp Config (Speaker Configuration)” for the speaker setup ( ➔ 29 ). Listening Mode s Listening Mode Description Input Source Speaker Layo u t Direct In this mode, au dio from the input source is output without surround-so und process- ing.
26 En Onky o-Original DSP List ening Modes Note *1 For the Blu-ray Discs, Dolby Digital is used. *2 A V rece i ver can input the DSD signal from HDMI IN . Setting the output setting on the player side to PCM might obtain a better sound according to the player .
27 En Advanced Operations Adv anced Setup Note The on-screen setup menus are displayed when: • There is no video input, or • The video input is 480p, 576p, 720p, 1080i, or 1080p. The on-screen setup menus a ppear on the connected TV and provide a con venient way to change the A V rece iv er’ s various settings.
28 En Explanatory No tes Menu HDMI Inpu t If you connect a video component to an HDMI input, you must assign that input to an i nput selector . For example, if you connect your Blu-ray Disc/D VD player to HDMI IN 2 , you must assign “ HDMI2 ” to the “ BD/D VD ” input selector .
29 En Note •W h e n a n HDMI IN is assigned to an input selector in “HDMI Input” ( ➔ 28 ), this input assignment is automatically set to the same HDMI IN . And in addition to the usual inputs (e.g., COAX , etc.), you can also select HDMI inputs.
30 En ■ Left, Center, Righ t, Surround Rig ht, Surr ound Left, Subwoofer ` Specify the dist ance from the each speaker to your lis- tening position. Note • The speaker distance setting cannot be changed while a pair of headphones is connected, or “ A udio TV OUT ” setting is set to “ On ” ( ➔ 31 ) or Speakers B is on.
31 En DTS Setting Neo:6 Music ■ Center Im age ` 0 to 2 to 5 W ith this setting, you can spec ify by ho w much the front left and right channel output is attenuated in order to create the center ch annel. Setting a v alue “0” in the middle is set to hea r a sound.
32 En Note •I f “ On ” is selected and the signal can be output by the TV , the A V receiver will output no sound through its speakers. •I f “ On ” is selec ted, “ TV Sp On ” appears on the display by pressing DISPLA Y . • When “ TV Contr ol ” is set to “ On ” , this setting is fixed to “ Au t o ” .
33 En Note • Do not assign the compon ent conn ected with the HDMI input to the TV/CD selector when you set “ TV Contr ol ” setting to “ On ”.
34 En Music Opti mizer The Music Optimizer function en hances the sound quality of compressed music files. Use it with musi c files that use “lossy” compression, such as MP3.
35 En The digital input si gnal formats are av ailable only for the input sources that you hav e a ssigned a digital input jack ( ➔ 28 ). Normally , the A V receiv er detects the signal format auto- matically .
36 En Controlling iPod & Other Components Contr olling iP od Models sold are different depending on the re gion. Connecting an Onky o Doc k B A *1 No. Onkyo Dock Cable Note Pa ge A UP-A1 Dock (Uni versal Port Option Dock) — • When UP-A1 Dock that seated iPod is connected, the power consumption on standby mode slightly increases.
37 En UP-A1 Dock W ith the UP-A1 Dock, you can easily play the music, photo, or mo vie stored on your iPod through the A V receiv er and enjoy great sound.
38 En ■ System Function System On When you turn on the A V recei ver, RI Dock and iPod turn on automatically . In addition, when the RI Dock and iPod are on, the A V receiv er can be turned on by pressing ON/ ST ANDBY .
39 En ✔ : A vailable b uttons Note • W ith some iPod models and generations, cer tain b uttons may not work as expected. • For detailed operation of the iPod, pl ease refer to the in struction ma nual. *1 This button do es not turn the Onkyo DS-A2 or DS-A2X RI Dock on or of f.
40 En Contr olling Other Onky o Components Y ou can use the A V receiv er’ s remote controller (RC-762M) to control your other Onkyo A V components. This section explains ho w to enter the remote control code (with the default underlined) for a component that you want to co ntrol: D VD, CD, etc.
41 En If you want to control an Onk yo component by pointing the remote controller dir ectly at it, use the followin g remote control codes: ` 32900 : Onkyo Blu-ray Disc play er ` 32901 : Onkyo HD-D V.
42 En Note • W ith some components, certai n buttons may no t work as expected, and some may not work at all. ✔ : A vailable b uttons *1 The p func tion is not supported. The p sup- ported by the A V receiv er is the CEC system control function of the HDMI standard.
43 En Others T roub leshooting If you ha ve an y trouble using the A V recei ver, look for a solution in this section. If you can’ t resolve the issue your- self, contact your Onkyo dealer .
44 En ■ Only the fr ont speakers produce sound ■ Onl y the center speaker produce s sound ■ The surround speakers pr oduce no sound ■ The center speaker produces no sound ■ The subwoof er produces no sound ■ There’ s no sound with a ce rtain signal format ■ Can’t get 5.
45 En ■ There’ s no picture from a sour ce connected to an HDMI IN ■ The on-screen menus don’t appear ■ Reception is noisy , FM stereo reception is noisy , or the FM STEREO indicator doesn.
46 En ■ The foll owing settings can be made f or the composite video inputs Y ou must use the buttons on the unit to make these set- tings. 1. While holding do wn the input selector button for the inpu t source that you want to set, press SETUP . 2.
47 En Specifications Amplifier Section Video Section T uner Section General ■ HDMI ■ Video Inputs ■ Video Outputs ■ A udio Inputs ■ A udio Outputs ■ Others Specif ications and features are subject to change without notice.
48 En About HDMI Designed to meet the inc reased demands of digital TV , HDMI (High Definition Mu ltimedia Interface) is a new digital interface standard for connecting TVs, projectors, Blu-ray Disc/D VD players, set-top boxes, and other video compo- nents.
49 En Using an RIHD-compatible TV , Play er , or Recorder p , which stands for Remote Interacti ve ov er HDMI, is the name of the system control function found on Onkyo components. The A V recei ver can be used with CEC (Consumer Electronics Control), which allo ws system control ov er HDMI and is part of the HDMI standard.
50 En ■ How to co nnect and setup 1 Conf irm the connecting and setting. 1. Connect the HDMI OUT jack to the HDMI input jack of the TV . 2. Connect the audio output from the TV to the OPTICAL IN 2 jack of the A V receiv er using an optical digita l cable.
51 En Memo.
SN 29400468 Y1004-1 (C) Copyright 2010 ONKY O CORPORA TION Japan. All rights reser ved. * 2 9 4 0 0 4 6 8 * Sales & Product Planning Div . : 2-1, Nisshin-cho, Ne yaga wa-shi, OSAKA 572-8540, JAP AN T el: 072-831-8023 F ax: 072-831-8163 ONKY O U .S.
デバイスOnkyo 29400468の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Onkyo 29400468をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはOnkyo 29400468の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Onkyo 29400468の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Onkyo 29400468で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Onkyo 29400468を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はOnkyo 29400468の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Onkyo 29400468に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちOnkyo 29400468デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
