OnkyoメーカーBD-SP808の使用説明書/サービス説明書
ページ先へ移動 of 64
Connections ............................................................ 14 Playback ..................................................................... 21 Function Setup ..................................................... 41 Others ..............
2 EN 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. F ollow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings . Install in accordanc e with the manufacturer ’ s instructions.
3 EN 1 . Recording C opyr ight —Unless it ’s for personal use only , recording copyrighted material is illegal without the per mission of the copyright holder . 2. A C F us e — The AC fuse inside the unit is not user - ser viceable. If you cannot tur n on the unit, contact your Onk yo dealer .
4 EN PRECA UTIONS • Do not use this unit when there’ s the possibility of moisture condensation occurring . Doing so may damage your discs and certain parts inside this unit. If condensation does occur , remove all discs and leave this unit turned on f or two to three hours .
5 EN IR signal check • If the remote control is not working properly, you can use a digital camera (including a cellular phone with built-in camera) to see if it is sending out an infrared signal. With a digital camera (including built-in cell phone cameras): Point a digital camera towards the remote control.
6 EN PRECA UTIONS “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation. “BONUSVIEW” is trademark of Blu-ray Disc Association. ”BD-Live” and ”BD-Live” logo are trademarks of Blu-ray Disc Association.
7 EN C ONTENTS Introduction PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Features . . . . . . . . . . . . . . . . . . . . .
8 EN FEA TURES Features Full high-definition video playback Watch movies in the highest picture quality available for your HDTV. This unit offers full high-definition video playback up to 1080p resolution for an amazing viewing experience. A highly detailed picture and increased sharpness delivers a more true-to-life picture.
9 EN Symbols U sed in this Manual To specify for which media type each function is, we put the following symbols at the beginning of each item to operate. Symbol Description BD-V Description refers to BD-video and BD-RE (ver. 2.1) / BD-R (ver. 1.1 / 1.
10 EN FUNC TIONAL O VERVIEW * The unit can also be turned on by pressing these buttons. 1. I / y y ON/STANDBY button • Press to turn on the unit, or to turn the unit into the standby mode. (To completely shut down the unit, you must unplug the AC power cord) 2.
11 EN FUNC TIONAL OVER VIEW * The unit can also be turned on by pressing these buttons. 1. DISPLAY button • Press to display the on-screen display menu. 2. ON/STANDBY I / y y button • Press to turn on the unit, or to turn the unit into the standby mode.
12 EN FUNC TIONAL OVER VIEW Installing the Batteries in the Remote Control Install 2 AA (1.5 V) batteries matching the polarity indicated inside battery compartment of the remote control. 1 Open the cover. 2 Insert batteries. Make sure to match + and - on the batteries to the marks indicated in the battery compartment.
13 EN FUNC TIONAL OVER VIEW Fr ont P anel Display 1 2 • Brightness of the display can be adjusted. Refer to “Panel Display” in “FUNCTION SETUP” on page 50. 1. Displays playback status icon. Refer to the table below. 2. Displays various kinds of information such as title number, elapsed time, repeat mode, etc.
14 EN C ONNEC TIONS Connection to the TV • Make one of the following connections, depending on the capabilities of your existing device. AUDIO IN L R VIDEO IN HDMI IN and or or * 1, 2 TV this unit s.
15 EN HDMI Output Mode and Actual Output Signals Press [RESOLUTION] to change the resolution of the video signal being output from HDMI OUT jack. The video resolution changes as follows every time [RESOLUTION] is pressed.
16 EN C ONNEC TIONS ■ Audio signals output from HDMI OUT jack “HDMI Audio Out” setting “HDMI Multi (Normal)” “HDMI Multi (LPCM)” “HDMI 2ch” “BD Audio Mode” setting “HD Audio Ou.
17 EN C ONNEC TIONS Connection to an Audio System • When you change the connections, all devices should be turned off. • Refer to the manual accompanying external devices for more information.
18 EN C ONNEC TIONS ■ Audio signals output from AUDIO OUTPUT (DIGITAL OPTICAL / COAXIAL) jacks For the settings in the “Digital Out” to take effect, “HDMI Audio Out” should be set to “Audio Mute”.
19 EN C ONNEC TIONS Connecting the AC Cord After you made all necessary connections, connect the AC cord to the AC INLET. Then connect the AC cord to the AC outlet. Insert the plugs securely. Incomplete connections will result in the generation of noise.
20 EN C ONNEC TIONS Note • After connecting to the Internet, set up necessary network settings. • Do not insert any cable other than a LAN cable to the ETHERNET terminal to avoid damaging the unit. • If your telecommunications equipment (modem, etc.
21 EN INFORMA TION ON PLA Y BA CK Before you start playing back a disc, read the following information. Play able Discs and Files This unit is compatible to play back the f ollowing discs / files. To play back a disc / file, make sure that it meets the requirements for region codes and color systems as described below.
22 EN Unplayable Discs and F iles The following discs will not be played back in this unit. • CD-ROM • CD-I (compact disc-interactive) • DVD-RAM • VSD (video single disc) • DVD-audio • video CD • HD DVD • SVCD • unfinalized disc • BD / DVD / CD / SD Memory Card contains DivX® files.
23 EN INFORMA TION ON PLA YBA CK ■ Chapter information <Title / Chapter information for BD and AVCHD> 1 1 / 10 B 4 5 1 2 3 T <Chapter information for DVD> 3 / 5 0 : 01 : 02 B 2 6 CHAPTER.
24 EN BASIC PLA Y BA CK BD-V DV D - V AV C H D Note • may appear at the top-right on the TV screen when the operation is prohibited by the disc or this unit. • During the playback of 2-layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer.
25 EN Operations Using Title Menu, Disc Menu, and Pop-up Menu BD-V DV D - V AV C H D Many of BD-video and DVD-video disc contains title menu (BD-video / DVD-video / AVCHD), disc menu (DVD-video) or pop-up menu (BD-video) which guides you through the available functions in the disc.
26 EN BASIC PLA Y BA CK Media icon and file name: : Folder : audio CD track : MP3 file : WMA file : JPEG file It is recommended that files to be played back in this unit are recorded under the following specifications: MP3 / WMA • Sampling frequency: 32 kHz, 44.
27 EN BASIC PLA Y BA CK Compatible Cards: - SD Memory Card (8MB - 2GB) - SDHC Memory Card (4GB - 8GB) - miniSD Card (8MB - 2GB) - microSD Card (8MB - 2GB) • For miniSD Card and microSD Card, the adapter will be required. Note • The “Media Select” screen will disappear under the conditions listed below: - when [RETURN] is pressed.
28 EN BASIC PLA Y BA CK Playing Video / Music / Photo Files from DLNA Certified Home Media Servers On this unit, you can play video, music and photo files stored on DLNA certified home media servers (version 1.5) connected to your home network. In order to use this feature, you must connect this unit to the Internet.
29 EN BASIC PLA Y BA CK DLNA Client (DMP) Our Planning Specification Items Description DLNA version 1.5 Video file System Stream Video Codec type Audio Codec type MPEG1 MPEG1-Video MPEG MPEG2-PS MPEG2.
30 EN F ast F or ward / F ast Reverse BD-V DV D - V CD AV C H D MP3 1 During playback, press [FWD D ] repeatedly for fast forward. During playback, press [REV E ] repeatedly for fast reverse. Every time you press [FWD D ] or [REV E ] , the playback speed will change.
31 EN A-B Repeat BD-V DV D - V CD AV C H D You can play back the specific part (between point A and point B) repeatedly. 1 During playback, press [A-B] at the desired starting point A. 2 During playback, press [A-B] at the desired ending point B. As soon as you set the point B, the part between point A and point B will start playback repeatedly.
32 EN SPECIAL PLA YBA CK 3 Press [PLAY B ] to start program playback. • Program playback will start. To exit from the program playback mode: • Press [RETURN] in stop mode.
33 EN SPECIAL PLA YBA CK Rapid Playback BD-V DV D - V AV C H D This function plays back approximately at 1.3 times the normal playback while keeping the sound output. This function is available only on discs recorded in the Dolby Digital format. 1 During playback, press [MODE] repeatedly until the Rapid playback setting appears.
34 EN SEARCH Using [SKIP H / G ] 1 During playback, press [SKIP G ] to move to the next track. Press it repeatedly to skip to subsequent tracks. Press [SKIP H ] once to go back to the beginning of the current track. Press it repeatedly to go to the previous tracks.
35 EN Switching Subtitles Some video materials may have subtitles in 1 or more languages. For commercially available discs, the supported languages can be found on the disc case. Follow the steps below to switch the subtitle language during playback. BD-V 1 During playback, press [SUBTITLE].
36 EN SPECIAL SET TINGS Setting the BD Audio Mode BD-V There are 2 ways to set “BD Audio Mode” setting; whether to output the secondary and interactive audio accompanied by the primary audio or only the primary audio.
37 EN SPECIAL SET TINGS Adjusting the Picture BD-V DV D - V AV C H D You can adjust the picture quality and store the setting you have adjusted on memory 1-5. 1 During playback, press [MODE] repeatedly to select "HD Picture Control" or "SD Picture Control", then press [ENTER].
38 EN NETFLIX OPER A TIONS Before Activating the Connection to Netflix After creating a Netflix account at netflix.com/Onkyo , follow the following procedure before activating the connection to Netflix. 1 Connect this unit to the Internet. • Refer to “Network Connection with LAN” on page 19.
39 EN Before Activating the Connection to CinemaNow / Blockbuster After creating a CinemaNow / Blockbuster account, follow the following procedure before activating the connection to CinemaNow / Blockbuster. 1 Connect this unit to the Internet. • Refer to “Network Connection with LAN” on page 19.
40 EN Renting or Purchasing Movies / TV Episodes After you set up the connection to CinemaNow / Blockbuster, you can rent or purchase movies / TV episodes and watch directly on your TV. 1 Press [B] or [C] while opening screen is displayed. • For opening screen, refer to page 12.
41 EN FUNC TION SETUP Using the Setup Menu In the setup menu you can change the setting for audio, video, language, etc. You cannot change the setting during playback. Setting items displayed in gray indicates they are not available under the conditions at the time.
42 EN FUNC TION SETUP ■ Language Language Audio Original Subtitle Off Disc Menu English Player Menu English • For how to select the setting items and options, refer to “Custom” on page 41. Setting items Options Audio Sets the language for audio.
43 EN FUNC TION SETUP ■ Video Video TV Aspect 16:9 Wide HDMI Select YCbCr HDMI RGB Setting Normal HDMI Auto Format Max HDMI Video Resolution Auto HDMI Deep Color Auto Component Output 480i • For how to select the setting items and options, refer to “Custom” on page 41.
44 EN FUNC TION SETUP Setting items Options Still Mode * 2 Adjusts picture resolution and quality in still mode. Auto*: Automatically selects the best resolution setting (“Frame” or “Field”) based on the data characteristics of the pictures.
45 EN FUNC TION SETUP ■ Audio Audio BD Audio Mode HD Audio Output HDMI Audio Out HDMI Multi (Normal) Down Sampling Off DRC Auto • For how to select the setting items and options, refer to “Custom” on page 41.
46 EN FUNC TION SETUP ■ Digital out setting When “Audio Mute” is selected in “HDMI Audio Out” setting, HDMI audio signal will be muted and the audio signals output from AUDIO OUTPUT (DIGITAL OPTICAL / COAXIAL) jacks change depending on “Digital Out” setting.
47 EN FUNC TION SETUP How to navigate through “HDMI Multi(LPCM)”. 1 Use [ K / L ] to select your desired menu item then press [ENTER]. 2 Use [ K / L ] to select your setting items. • Press [RETURN] to go back to the previous screen. 3 Use [ s / B ] to select desired options.
48 EN FUNCTION SETUP Menu Setting items Options Descriptions Delay Time This is a parameter for optimizing the timing at which the sound is output from the speakers according to their distance from the listening position. Distance Feet* Set the desired measure system.
49 EN FUNC TION SETUP ■ Parental Ratings control allows you to set a limit, which prevents your children from viewing inappropriate materials. Playback will be stopped if the ratings exceed the levels you set, and it will require you to enter a password before playing back the disc.
50 EN FUNC TION SETUP ■ Others Others Angle Icon On Auto Power Off On Panel Display Auto HDMI CEC On Mode Select Disc Network Connection Enable(Easy) Software Update • For how to select the setting items and options, refer to “Custom” on page 41.
51 EN Setting items Options Network Connection Enable (Custom) Proxy Setting Do Not Use* Set the proxy server. In most cases, you can connect to the Internet without using proxy server. Use Proxy Address Proxy Port Connection Speed Auto* Set the connection speed.
52 EN FUNC TION SETUP Network Connection Set up the network connection settings in order to use BD-Live, DLNA home media server, Netflix / CinemaNow / Blockbuster feature or network update function.
53 EN FUNC TION SETUP If you select “Manual”, follow the following instruction to set the IP address and DNS. 3-a) Use [ K / L ] to select “IP Address”, “Subnet Mask” or “Default Gateway”, then press [ENTER] . IP address setting screen will appear.
54 EN FUNC TION SETUP 3-a) Use [ K / L ] to select “Proxy Address”, then press [ENTER] . Proxy address setting screen will appear. Enter proxy address. • The keyboard screen will appear. Others Proxy Address _ 1 34567890 abc de f gh i j k l m nopq r s t uv wxyz .
55 EN FUNC TION SETUP Disable Deactivate all the network connection and settings. 1 Follow steps 1 to 4 in “Connection Test” on page 52. 2 Use [ K / L ] to select “Disable”, then press [ENTER]. 3 Press [RETURN] to go back to the previous screen, or press [SETUP] to exit.
56 EN FUNC TION SETUP Initialize Initialize the setting, SD Memory Card, network setting or deactivate Netflix. 1 In stop mode, press [SETUP]. 2 Use [ K / L ] to select , then press [ENTER]. 3 Use [ K / L ] to select a desired option, then press [ENTER].
57 EN TROUBLESHOO TING If the unit does not perform properly when operated as instructed in this manual, check the unit, consulting the following checklist. Problem Solution No power. - Check if the AC cord is properly connected. - Unplug the AC cord once, and wait for 5-10 seconds and then plug it in again.
58 EN TROUBLESHOO TING Problem Solution Playback does not start when the title is selected. - Check the settings in “Parental” menu. The password for rating level has been forgotten. - Enter the default password “4737”, then your forgotten password will be cleared.
59 EN Analog Audio An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also “Digital Audio”. Aspect R atio The width of a TV screen relative to its height.
60 EN GL OSSARY JPEG (Joint Photographic Experts Group) JPEG is a method of compressing still picture files. You can copy JPEG files on BD-RE/-R, DVD-RW/-R, CD-RW/-R or SD Memory Card or DLNA home server from a computer and play back the files on this unit.
61 EN Language Code A-B Abkhazian 4748 Afar 4747 Afrikaans 4752 Albanian 6563 Amharic 4759 Arabic 4764 Armenian 5471 Assamese 4765 Aymara 4771 Azerbaijani 4772 Bashkir 4847 Basque 5167 Bengali;Bangla .
62 EN SPECIFICA TIONS General Signal system NTSC color Power requirements 120V AC, 60Hz Power consumption 25W (standby: 0.6W) Dimensions (width x height x depth) 17- 1 / 8 x 4- 1 / 4 x 12- 5 / 16 inches (435 x 108 x 312mm) Weight 10.
63 EN NET WORK SER VICE DISCLAIMER Network Service Disclaimer Content and services made av ailable through this product are transmitted b y third par ties by means of netw orks and transmission facili.
Printed in China BD-SP808(B)CDC1N E5SE0UD / 1VMN29633A ★★★★ * 1 V M N 29633 A* Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8023 Fax: 072-831-8163 ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.
デバイスOnkyo BD-SP808の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Onkyo BD-SP808をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはOnkyo BD-SP808の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Onkyo BD-SP808の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Onkyo BD-SP808で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Onkyo BD-SP808を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はOnkyo BD-SP808の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Onkyo BD-SP808に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちOnkyo BD-SP808デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。