OnkyoメーカーCP704の使用説明書/サービス説明書
ページ先へ移動 of 52
E n D VD Changer DV -CP704 Instruction Manual Thank you for purchasing an Onkyo D V -CP704 D VD Changer . Read this manual carefully before using your ne w D VD Changer . A good understanding of its features and operation will allo w you to achiev e optimum performance and enjoyment.
2 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follo w all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
3 Precautions 1. Recording Copyright —Unless it’ s for personal use only , recording copyrighted material is illegal with- out the permission of the copyright holder . 2. A C Fuse —The A C fuse inside the unit is not user- serviceable. If you cannot turn on the unit, contact your Onkyo dealer .
4 Precautions —Continued This unit contains a semiconductor laser system and is classified as a “CLASS 1 LASER PR ODUCT”. So, to use this model properly , read this Instruction Manual carefully . In case of any trouble, please contact the store where you purchased the unit.
5 Contents Important Safety Instructions .................. 2 Precautions ................................................ 3 Contents ..................................................... 5 Introduction ............................................... 6 Supplied Accessories.
6 Intr oduction Make sure you ha ve the following accessories: In catalogs and on packaging, the letter at the end of the product name indicates the color .
7 Introduction —Continued Supported Discs The D V -CP704 supports the follo wing discs. • The D V -CP704 does not support disc types not listed. • The D V -CP704 supports 8 cm and 12 cm discs. • Don’t use discs with an unusual shape, such as those shown belo w , because you may damage the DV -CP704.
8 Introduction —Continued Disc Content Organization ■ D VD-Video Format D VD-V ideo discs contain titles, which are usually subdi- vided into chapters. ■ A udio CD Format Audio CDs contain tracks. ■ MP3/WMA Files MP3 and WMA files are typically organized into folders.
9 Introduction —Continued Handling Discs •N ev er touch the underside of a disc. Always hold discs by the edge, as shown. •N ev er attach adhesiv e tape or sticky labels to discs. Cleaning Discs •F or best results, keep your discs clean. Fingerprints and dust can affect the sound and picture quality and should be remov ed as follows.
10 Introduction —Continued ■ CD-R (compact disc recordab le): A type of CD that can be recorded only once. Can be used to make audio CDs, or MP3/WMA/JPEG discs. ■ CD-R W (compact disc rewritable): A type of CD that can be recorded many times. Can be used to make audio CDs, MP3/WMA/JPEG discs.
11 Contr ols & Connectors The page numbers in parentheses show where you can find the main e xplanation for each item. A ST ANDBY/ON button (22, 45) This button is used to set the D V -CP704 to On or Standby . Don’t turn on the po wer until you’ ve completed, and double checked all connections (page 22).
12 Controls & Connector s —Continued The page numbers in parentheses show where you can find the main e xplanation for each item. 1 CHAIN MODE, ALL, DVD & CD indicator s (33) The CHAIN MODE indicator appears when the Chain mode function is on.
13 Controls & Connector s —Continued The page numbers in parentheses show where you can find the main e xplanation for each item. A REMO TE CONTROL These (Remote Interacti ve) connectors can be connected to the connectors on your other Onkyo A V components for interactiv e control.
14 Controls & Connector s —Continued The page numbers in parentheses show where you can find the main explanation for each item. A ON button (22) This button is used to turn on the D V -CP704. Don’t turn on the D V -CP704 until you’ ve com- pleted, and double checked all connections (page 17).
15 Controls & Connector s —Continued N ASPECT/ZOOM button (41, 44) This button is used to change the vie w mode. Press- ing and holding it for a few seconds selects Zoom mode. O RESOLUTION button (39) This button is used to set the video resolution of the HDMI OUT , and to turn the HDMI OUT on or off.
16 Bef ore Using the D V -CP704 Notes: • If the remote controller doesn’t w ork reliably , try replacing both batteries. • Don’t mix ne w and old batteries, or different types of batteries. • If you intend not to use the remote controller for a long time, remov e the batteries to prevent possible leakage and corrosion.
17 Connecting the D V -CP704 This chapter explains ho w to connect the D V -CP704 to your other A V components. • Read the manuals supplied with your A V components. • Don’t connect the po wer cord until you’ ve completed all audio and video connections.
18 Connecting the D V -CP704 —Continued This section explains ho w to connect the D V -CP704 to your TV or projector . In this hookup example, the TV handles the audio and video. To enjoy Dolby Digital or DTS (5.1-channel surround), you’ll need a compatible decoder (see page 19).
19 Connecting the D V -CP704 —Continued To enjoy Dolby Digital or DTS surround sound, you need to connect one of the D V -CP704 digital audio out- puts to the digital input on a Dolby Digital or DTS decoder or an A V receiv er with built-in decoders.
20 Connecting the D V -CP704 —Continued Digital Connection Use an optical (or coaxial) digital audio cable to connect the D V -CP704’ s COAXIAL (or OPTICAL) DIGIT AL A UDIO OUTPUT to an optical (or coaxial) input on your stereo amp, as shown. Notes: • Be sure to set the Audio menu, Digital/HDMI Audio Out setting to “PCM” (see page 45).
21 Connecting the D V -CP704 —Continued Notes: • The D V -CP704 supports HDCP (High-bandwidth Digital Content Protection), a protection system for digital video. HDMI components that you connect to the D V -CP704 must also support HDCP . • The D V -CP704 supports High-Definition Multimedia Interface Specification Information V ersion 1.
22 Po wering Up & Setting Up the D V -CP704 Before connecting the power cord, connect all your A V components (see page 17 to page 21). Don’t for get to turn on your TV or projector and select the video input to which the D V -CP704 is connected.
23 Basic Pla ybac k This section explains ho w to load and remove discs. Notes: •Y ou can load up to six discs. Y ou don’t ha ve to load all six discs ev ery time. • When the disc tray is closed, all of the disc indicators appear until the D V -CP704 has checked each bay for the presence of a disc.
24 Basic Playbac k —Continued This section explains ho w to load and remove discs with- out stopping playback. The section explains ho w to select loaded discs. Notes: • The type of disc currently selected is shown on the dis- play: D VD, or CD (see page 12).
25 Basic Playbac k —Continued This section explains ho w to start, pause, and stop play- back. Notes: • During playback, you can select chapters or tracks by using the Next [ ] and Previous [ ] b uttons. • When you stop playback of a D VD-V ideo disc, the DV -CP704 remembers the point at which playback was stopped.
26 Basic Playbac k —Continued D VD-V ideo discs usually hav e an onscreen menu from which you can select titles, chapters, and other options, including foreign language soundtracks, subtitles, and audio formats (e.g., Dolby Digital or DTS). Notes: • Not all D VD-V ideo discs hav e menus.
27 Basic Playbac k —Continued On the disc navigation windo w , you can select CD tracks or MP3, WMA, or JPEG files. Using the Disc Navigation Window 1 Load and select an audio CD or MP3, WMA, or JPEG disc. See page 23 and page 24. The disc navigation windo w appears.
28 Basic Playbac k —Continued Notes: •Y ou can use the Random Playback function to play a random selection of MP3/WMA files (page 35). • During random playback, memory playback, or party mode p.
29 Basic Playbac k —Continued Notes: •Y ou can also select chapters by using the number but- tons, without opening the Search window . • If the current D VD-V ideo disc contains only one title, you won’ t be able to select other titles. Similarly , if it contains no chapters, you won’ t be able to select chap- ters.
30 Basic Playbac k —Continued The section explains ho w to fast forward and re verse. Notes: • No sound is output during fast forward or f ast reverse of a D VD-V ideo or MP3 disc. •F ast forward and fast re verse cannot be used with WMA files.
31 Basic Playbac k —Continued W ith the Slow-motion Playback function you can watch a scene slowly either forw ard or backward. Notes: • No sound is output during slow-motion playback. • The slow-motion speed indication is only approxi- mate, and the actual speed will vary from disc to disc.
32 Basic Playbac k —Continued The D V -CP704 supports JPEG CDs, so you can vie w your photos on TV either indi vidually or as a slideshow . Notes: •Y ou can view JPEG images in high definition by changing the HD JPEG mode setting (see page 44). • The Memory and Random functions cannot be used with JPEG files.
33 Basic Playbac k —Continued W ith the Chain mode function, you can play all discs, all D VD-V ideo discs, or all audio CDs and MP3/WMA discs consecutiv ely as if they were one big disc. Note: • JPEG files are skipped during Chain mode playback.
34 Ad vanced Pla yback W ith the Repeat Playback function you can play the cur- rent disc, title, chapter , track, or folder of MP3/WMA files ov er-and-ov er again.
35 Adv anced Playbac k —Continued W ith the Random Playback function you can enjoy a random selection of discs, titles, chapters, tracks, or MP3/WMA folders. Notes: •T o select the next random disc, title, chapter , track, or MP3/WMA folder during random playback, press the Next [ ] button.
36 Adv anced Playbac k —Continued W ith the Memory Playback function, you can create your own memory list of up to 32 titles, chapters, or tracks. Inserting New Items in the List Memory Playbac k 1 Press the [MEMOR Y] button. The Memory List window appears onscreen, as shown.
37 Adv anced Playbac k —Continued Deleting Items from the List Editing Steps • Deleting the memory list: Press the Stop button to stop playback of the memory list, and while “Memory” is displayed onscreen, press the [CLR] button. The memory list is deleted and “Memory Clear” is displayed onscreen.
38 Adv anced Playbac k —Continued Some D VD-V ideo discs feature soundtracks in sev eral languages and audio formats (e.g., Dolby Digital or DTS). Music D VD-V ideo discs sometimes feature soundtracks in sev eral audio formats, such as PCM or Dolby Digital 5.
39 Adv anced Playbac k —Continued This section explains ho w to turn HDMI on and off and change the video resolution when your TV or projector is connected to the HDMI OUT . Tip: These settings can also be changed by using the onscreen setup menus (see page 44).
40 Adv anced Playbac k —Continued W ith the Last Memory function you can resume play- back from where you left off e ven if another disc has been selected or the disc has been remov ed. Last Mem- ory also remembers the soundtrack and subtitle lan- guages that you were using.
41 Adv anced Playbac k —Continued W ith the Zoom function you can enlarge any part of the picture. Notes: • During a JPEG slideshow , you can use the Fast F or- w ard [ ] and Fast Re verse [ ] buttons to zoom in and out. • The Zoom function may not work with some D VDs.
42 Configuring the D V -CP704 This chapter explains the v arious functions and settings of the onscreen setup menus. Functions and settings are arranged into six menus: Picture , Audio , Language , Display , Operation Setting , and Initial .
43 Configuring the D V -CP704 —Continued This section explains ho w to use the onscreen setup menus. TV Shape W ith this setting you can select a picture format to match the aspect ratio of your TV . 4:3 Letter box (default): Choose this option if you hav e a standard TV (4:3 aspect ratio).
44 Configuring the D V -CP704 —Continued View Mode W ith this setting you can adjust the aspect of the picture so that it fits your TV screen. Due to your TV’ s aspect ratio setting and the D VD’ s aspect ratio, black bars may appear abov e and below the picture or at the sides and the aspect of the picture may be unsuitable.
45 Configuring the D V -CP704 —Continued Video Black Le vel W ith this setting you can adjust the picture blackness of analog video output. Light: Blacks are lighter, and the entire picture becomes lighter . Dark: Blacks are darker , and the entire picture becomes darker .
46 Configuring the D V -CP704 —Continued On-Screen Language W ith this setting you can select a language for the onscreen setup menus and messages. Select one of the displayed language. Disc Menu Language W ith this setting you can select your preferred language for disc menus.
47 Configuring the D V -CP704 —Continued P arental Lock W ith the Parental Lock function you can block access to certain scenes that the authors hav e flagged as being unsuitable for children.
48 Configuring the D V -CP704 —Continued This menu appears automatically the very first time you turn on the D V -CP704. See “First T ime Setup” on page 22 for more information.
49 Tr oubleshooting Symptom P ossible cause Remedy Can’t turn on the DV -CP704? The power cord is not connected. Connect the po wer cord to a suitable wall outlet (page 22). External interference is affecting the D V -CP704’ s dig- ital circuitry .
50 Tr oubleshooting —Contin ued Symptom P ossible cause Remedy No sound? No Digital A udio Output? The Digital/HDMI Audio Out setting is set to Off. Change the Digital/HDMI Audio Out setting to either All or PCM (page 45). Y our TV or A V receiv er doesn’t support Dolby Digital.
51 Tr oubleshooting —Contin ued If you’ re using an HDMI connection and there’ s no picture or sound, you can check the status of the HDMI connection by pressing and holding down the D V -CP704’ s [DISPLA Y] button for 10 seconds until a message ID appears on the display .
52 SN 29344218 I0607-1 Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8023 Fax: 072-831-8124 ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.
デバイスOnkyo CP704の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Onkyo CP704をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはOnkyo CP704の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Onkyo CP704の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Onkyo CP704で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Onkyo CP704を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はOnkyo CP704の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Onkyo CP704に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちOnkyo CP704デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
