OnkyoメーカーMD-105Xの使用説明書/サービス説明書
ページ先へ移動 of 56
English Operating Instructions MiniDisc Recorder MD-105X Before using Connections Operations Other Information DISC LOADING MECHANISM0 REC DISPLAY EDIT/NO MINDISC RECODER AMCS （ PUSH TO ENTER ）.
2 Thank you for pur chasing ... Before using Main Features Thank you for purchasing the ONKYO MD-105X MD Recor der . Please read this manual thor oughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain the optimum performance and listening enjoyment from your new MD-105X.
3 Before Using Connections Other Information Operations 1. Read Instructions – All the safety and operating instructions should be read befor e the appliance is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future r eference.
4 Pr ecautions 1. W arranty Claim Y ou can find the serial number on the rear panel of this unit. In case of warranty claim, please re- port this number . 2. Recording Copyright Recording of copyrighted material for other than personal use is illegal without permission of the copyright holder .
5 Before Using Connections Other Information Operations Precautions(continued) For U.S. model The laser is covered by a housing which pr events exposur e d uring operation or maintenance.
6 Pr ecautions(continued) For British model Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel.
7 Before Using Connections Other Information Operations T able of contents Checking the supplied accessories Check that the following accessories are supplied with this unit.
8 Using the r emote controller Inserting the remote contr oller batteries 1 Remove the battery compart- ment cover by opening it as shown in the illustration. Using the r emote controller Point the remote contr oller toward the remote control sensor .
9 Before Using Connections Other Information Operations Inserting the remote contr oller batteries 1 Remove the battery compart- ment cover by pressing the tab and lifting up the cover . 2 Insert two AA (R6 or UM-3)-size batteries into the battery com- partment.
10 Connections Connecting to the Onkyo Separate Collection series components This section introduces you to the other Separate Collection Series system components and their convenient system functions, followed by connecting instructions. The following Separate Collection series components are commer cially available: • T -405X .
11 Before Using Connections Other Information Operations Connecting to the other components Before connecting • Do not connect the unit's AC power cord to a wall outlet until you have completed all the other connections.
12 Connecting to the other components 1 Connection with the Amplifier Connect the MD-105X to the MD (or T APE) jacks of your amplifier . 2 Connection to the Digital Input T erminals (DIGIT AL INPUT 1,.
13 Before Using Connections Other Information Operations Connecting to the other components (continued) Connecting the ( z ) contr oller If you are using other ONKYO components equipped with z connectors, you can control these components using the amplifier's remote cnotr oller .
14 Normal play Operations 1 Pr ess the ST ANDBY/ON button. (or the POWER button on the remote contr oller) The ST ANDBY indicator goes out. 2 Insert an MD. The MD recor der reads TOC (T able Of Contents) information on the MD to display the total number of tracks and total playing time.
15 Before Using Connections Other Information Operations DISC LOADING MECHANISM0 REC DISPLAY EDIT/NO MINDISC RECODER AMCS （ PUSH TO ENTER ） STANDBY/ON STANDBY CD DUBBING INPUT ANALOG ST D1 D2 .
16 Selecting the track to play using the number buttons Press the number button on the r emote controller to select the track you want to play . Changing the playing track using the AMCS During play , you can change the track that is playing by turning the AMCS knob (or by pressing the q and w buttons on the remote contr oller).
17 Before Using Connections Other Information Operations POWER EJECT CONTINUE PLAY MODE RANDOM MEMORY REPEAT A-B A.SPACE M.SCAN Z ., ) CLEAR ENTER ! ? / ( REC NAME SCROLL DISPLAY ABCDE FGHI J KLMN O P.
18 VOLUME C D / M D 1 23 10 / 0 - - / - - - MUTING 4 56 78 9 TIMER UP/DOWN ENTER REPEAT RANDOM C D CLEAR MEMORY DIS C REPEAT SCROLL REC PLAY MODE CLEAR M D PRESET F MA M TAPE TUNER PAUSE/STEP DVD POWER SLEEP CLOCK CALL INPUT SELECTOR G.
19 Before Using Connections Other Information Operations The following operation is possible using either of the following r emote controllers only: RC-409MD (supplied) RC-398S (supplied with the A-905X amplifier) Repeatedly playing all tracks of an MD Press the REPEA T button on the remote controller just once.
20 T o stop A-B Repeat • Press the A-B or REPEA T button when a section is in Repeat play . The A-B Repeat mode is now canceled. • Press the e button when a section is in Repeat play . The A-B Repeat mode is canceled and play of the current track stops.
21 Before Using Connections Other Information Operations • Using the Memory function, you can select your favorite tracks (up to 25 tracks) on an MD and arrange them in the desired or der . 1 When the MD recor der is stopped, press the MEMOR Y button (RC-409MD).
22 Memory play (continued) >25 12345 6789 1 0 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 FGH I J KLM NO PQRS T U VWX Y Z ., / C D / M D 1 2 3 4 56 78 9 10 / 0 - - / - - - (RC-409MD) (RC-398S) Selecting a track using the remote contr oller T o select a track numbered 26 or above using RC-409MD Press the [>25] button first.
23 Before Using Connections Other Information Operations CD-dubbing (System operation) CD-dubbing (System operation) Setting the CD dubbing mode Y ou can set either "Album" or "Fadeout" CD dubbing mode. In the Album CD dubbing mode, the track being recor ded will be discarded if the end of MD is reached during r ecording.
24 5 Press the CD DUBBING button on the MD-105X The CD player automatically searches for the disc's peak level, while the MD-105X sets the optimum peak level and then enters the recor ding standby mode. The MD-105X starts digital recor ding the whole disc as soon as the disc's first track starts playing.
25 Before Using Connections Other Information Operations Analog recor ding 1 Press the ST ANDBY/ON button. The ST ANDBY indicator goes out. 2 Load a recor dable MD. T o record by erasing all of the existing tracks on a prer ecorded MD Erase all the tracks before you start recor ding (see page 37).
26 Analog recor ding (continued) 4 Press the o REC button. The MD recor der is now in the recor ding standby mode. • When your MD-105X is configured with C-705X and K-505X, start playing the CD or tape before pr essing the REC button in step 4. . 5 Using the AMCS knob, adjust the recor ding level.
27 Before Using Connections Other Information Operations Since the interval between tracks is detected based on the sound level, some tracks may not be numbered corr ectly in the following cases: • Recorded condition of the cassette tape is bad (noise between tracks).
28 Digital r ecording Digital recor ding refers to recor ding where an optical digital cable is used for inputting signals fr om the recor ding source. This MD recor der contains a digital input signal sampling frequency rate converter which converts the sampling frequency of digital input signals to 44.
29 Before Using Connections Other Information Operations Digital recor ding (continued) TRACK 12345 6789 1 0 11 12 13 14 15 0 10 2 20 40 R 6 L 15 DIGITAL IN 1 (Continued to the next page) 12345 6789 1 0 11 12 13 14 15 0 10 2 20 40 R 6 L 15 DIGITAL IN 1 4 Press the o REC button.
30 12345 6789 1 0 11 12 13 14 15 DIGITAL IN 0 10 2 20 40 R 6 L 15 1 TOC Digital r ecording (continued) • For track numbers to be marked automatically , the signature code included in the digital signal at the beginning and ending of each track is necessary .
31 Before Using Connections Other Information Operations Signal Synchr o recor ding Even if your r ecording source is not Onkyo z -compatible, you can perfor m synchronized recor ding. 1 Use the INPUT selector to select MO, ST , D1, or D2, according to the connected device.
32 CD-synchro r ecording When your MD recor der is configured into a system with Onkyo Separate Collection series components (A-905X and C-705X), the operation of the MD recor der can be synchronized with that of the CD player . 1 Set the MD recor der to the recor ding standby mode.
33 Before Using Connections Other Information Operations ANALOG ST D1 D2 MO Synchro-r ecording fr om cassette deck to MD (Cassette Synchro recor ding) When your MD-105X is configured into a system with Onkyo Separate Collection series components (A-905X and K-505X), synchronized r ecording from the cassette deck to the MD recor der is possible.
34 Synchro-r ecording fr om MD to cassette deck When the MD-105X is configured into a system with Onkyo Separate Collection series components (A-905X and K-505X), synchronized r ecording from the MD r ecorder to the cassette tape deck is possible.
35 Before Using Connections Other Information Operations Timer operation When your MD recor der is configured into a system with Onkyo Separate Collection series components (A-905X and T -405X), you can recor d the desired br oadcasting programs or play your favorite MD at a specified time using the tuner's timer .
36 Checking the contents of recor ding • If you have not operated the unit since stopping a recording, the track to be played will flash in the music calendar . Press the n button to start playing the flashing track. • T o playback from the beginning of the MD, immediately after recor ding is stopped, press the e button again.
37 Before Using Connections Other Information Operations 3 Pr ess the YES button. The selected track is erased. When the erasing of the track is completed, "Complete" appears in the display .
38 Editing the contents of an MD (continued) Dividing a track The following operation is possible during the playback is ongoing or paused. 1 Pr ess the EDIT/NO button several times until "Divide?" appears in the display . Fine adjust the point wher e you wish to divide the track.
39 Before Using Connections Other Information Operations Combining tracks Y ou can combine two adjacent tracks into one. Y ou cannot, however , combine the two tracks if the one of which is recor ded in the MO (monaural) mode and the other in the ST (stereo), Digital In1, or Digital In2 mode.
40 89 1 0 11 12 13 14 15 DIGITAL IN TOC 0 10 2 20 40 R 6 L 15 1 • When tracks are combined, the tracks following those tracks are advanced, each given a new number which is smaller by one track than the previous track number .
41 Before Using Connections Other Information Operations Editing the contents of an MD (continued) Moving a track The following operation is possible when the unit is stopped or paused. 1 T ur n the AMCS knob until the track number you want to move is displayed.
42 NAME Naming a track or disc T o name a disc The MD recor der must be stopped. T o name a track The MD recor der may be stopped, paused, playing, or recor ding. (The characters being entered ar e canceled if the track which is playing or being recor ded changes.
43 Before Using Connections Other Information Operations Naming a track or disc (Continued) • W ith the supplied r emote controller (RC-409MD), pr ess the DISPLA Y button to change the character input mode. 5 Enter a track name or disc name using the AMCS knob.
44 Erasing the disc name and all track names at one time 1 Press the STOP button. 2 Press the EDIT/NO button to display "Name Erase?". Press the EDIT/NO button several times until “Name Erase?” appears.
45 Before Using Connections Other Information Operations DISC LOADING MECHANISM0 REC DISPLAY EDIT/NO MINDISC RECODER AMCS （ PUSH TO ENTER ） STANDBY/ON STANDBY CD DUBBING INPUT ANALOG ST D1 D2 .
46 Message list The following table explains the various messages that appear in the display . Message Meaning Blank Disc A new recordable MD or a r ecordable MD without disc or track names is inserted. Cannot Copy An attempt was made to make a second copy from a digitally dubbed MD (see "Rules for Digital Recording" on page 48).
47 Before Using Connections Other Information Operations The recor ding system in your MiniDisc recorder is radically dif ferent from those used in cassette and DA T decks and is characterized by the limitations described below .
48 Rule 2 Y ou can recor d the digital input signal of a digital satellite broadcast onto a r ecor dable MD via the digital input terminals on MD recor der which is capable of handling a sampling frequency of 32 kHz or 48 kHz.
49 Before Using Connections Other Information Operations T r oubleshooting If you encounter a difficulty while using your unit, use this tr oubleshooting guide as an aid to remedy the pr oblem. Because the unit contains a microcomputer to pr ovide advanced functions, it may malfunction due to external noise or static electricity .
50 Symptom The disc name or track name cannot be entered. System function cannot be used. Remedy • Close the recor d-protect hole (See page 36). • Replace it with a recordable disc. • Check all cable connections. The system functions cannot be used even if remote contr ol ( z ) cables are connected.
51 Before Using Connections Other Information Operations Precautions for handling the MiniDisc (MD) The MD is housed in a cartridge, so you can handle it without worrying about dust and fingerprints. Even so, a dirty or warped cartridge may cause malfunction.
52 Display (Continued to the next page) Indexed to parts and controls DISC LOADING MECHANISM0 REC DISPLAY EDIT/NO MINDISC RECODER AMCS （ PUSH TO ENTER ） STANDBY CD DUBBING INPUT ANALOG ST D1 D2.
53 Before Using Connections Other Information Operations Indexed to parts and controls (continued) POWER button [14] MD operation buttons Stop button ( e ) [14] Play button ( s ) [14] Pause button ( g.
54 VOLUME C D / M D 1 2 3 10 / 0 - - / - - - MUTING 4 56 78 9 TIMER UP/DOWN ENTER REPEAT RANDOM C D CLEAR MEMORY DISC REPEAT SCROLL REC PLAY MODE CLEAR M D PRESET F MA M TAPE TUNER PAUSE/STEP DVD POWER SLEEP CLOCK CALL INPUT SELECTOR G.
55 Before Using Connections Other Information Operations MEMO.
SN29342793 Printed in Japan D9907-1 Sales & Product Planning Div .:2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAP AN T el: 0720-31-81 1 1 Fax: 0720-33-5222 ONKY O U.S.A. CORPORA TION 200 Williams Drive, Ramesy , N.J. 07446, U.S.A. T el: 201-825-7950 Fax: 201-825-8150 E-mail: onkyo@onkyousa.
デバイスOnkyo MD-105Xの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Onkyo MD-105Xをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはOnkyo MD-105Xの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Onkyo MD-105Xの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Onkyo MD-105Xで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Onkyo MD-105Xを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はOnkyo MD-105Xの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Onkyo MD-105Xに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちOnkyo MD-105Xデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
