OnkyoメーカーTX-NR1000の使用説明書/サービス説明書
ページ先へ移動 of 152
E n A V Receiv er TX-NR1000 TX-NR5000E Instruction Manual Thank you for purchasing an Onkyo A V Recei ver . Please read this manual thoroughly before making connections and plugging in the unit. Follo wing the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your ne w A V Receiver .
2 Impor tant Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follo w all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any v entilation openings.
3 Precautions 1. Recording Copyright Unless it ’ s for personal use only , recording copyrighted material is illegal without permission of the copyright holder . 2. A C Fuse The A C fuse inside the TX-NR1000/TX-NR5000E is not user-serviceable. If you cannot turn on the TX-NR1000/ TX-NR5000E, contact your Onkyo dealer .
4 T ab le of Contents Important Safety Instructions ..........................2 Precautions ........................................................3 Features .............................................................6 Supplied Accessories ........
5 T able of Contents —Continued About Network Configuration ........................ 73 Using the Remote Controller ......................... 74 Enjoying Internet Radio ................................. 76 Playing a Music File Saved on the Net-Tune Server .
6 Features Amplifier Features • 192 kHz/24-Bit D A C f or All Channels • Color -Coded Heavy Duty Dual Banana Plug Compatible T ransparent Speaker P osts • Color -Coded 7.
7 Features —Continued • A udiophile Grade Parts • IntelliV olume • Pure A udio Mode • Digital Upsampling • Absolute Ground Plate • Large, Fluor escent, 35 Dot Matrix Display W ith 4 Mode.
8 Supplied Accessories Make sure you ha ve the follo wing accessories: Plug the supplied power cord into this A C INLET . • Do not use a power cord other than the one supplied with the TX-NR1000/TX-NR5000E. The po wer cord supplied is designed for use with the TX-NR1000/ TX-NR5000E and should not be used with any other device.
9 Bef ore Using the TX-NR1000/TX-NR5000E Notes: • The supplied batteries should last for about six months, although this will vary with usage. • If the remote controller doesn ’ t w ork reliably , try replacing the batteries. • Don ’ t mix ne w and old batteries, or dif ferent types of batteries.
10 Inde x P ar ts and F acilities Here is an explanation of the controls and displays on the front panel of the TX-NR1000/TX-NR5000E. The speci fi cations for your model may differ due to re gional requirements.
11 Index P ar ts and Facilities —Continued For further operational instructions, see the pages indicated in brackets [ ]. 1 PO WER switc h (for all models other than USA, Canadian, and A ustralian models) [50] Press to turn on and off the main po wer supply for the TX-NR1000/TX-NR5000E.
12 Index P ar ts and Facilities —Continued Inner P anels TUNING MODE MEMORY SETUP EXIT PHONES VIDEO 7 INPUT S VIDEO DIGITAL AUDIO VIDEO L R LISTENING MODE AUDIO SELECTOR TONE CLEAR DIMMER ZONE 2 REC.
13 Index P ar ts and Facilities —Continued A LISTENING MODE button [59] Press this button to enter the setup mode for the listening mode. T urning the [SELECT/PRESET] allows you to select the listening mode. T o con fi rm your selection and exit the setup mode, press the [SELECT/PRESET].
14 Index P ar ts and Facilities —Continued 1 ( ) i.LINK S400 (A UDIO) terminals Some of the Asian models are not equipped with the i.LINK(A UDIO) terminals. These connectors are for connecting to the i.LINK (A UDIO)-ready de vice using a 4-pin (S400) i.
15 Index P ar ts and Facilities —Continued B RS 232 This port is for connecting the TX-NR1000/ TX-NR5000E to home automation and external controllers. C PRE OUT A/B T o use the TX-NR1000/TX-NR5000E as a preampli fi er , connect a power ampli fi er to this jack.
16 Index P ar ts and Facilities —Continued The TX-NR1000/TX-NR5000E ’ s remote controller is a multipurpose device that can be used to control not just the TX-NR1000/TX-NR5000E but your other A V components as well. This section e xplains how its various operating modes can be used to control the TX-NR1000/TX-NR5000E.
17 Index P ar ts and Facilities —Continued E DIRECT button This button is used to select the Direct listening mode. F PURE A button This button is used to select the Pure Audio listen- ing mode. G TEST TONE, CH SEL, LEVEL – & LEVEL+ buttons These buttons are used to adjust the le vel of each speaker indi vidually .
18 Speaker Placement The TX-NR1000/TX-NR5000E has many e xcellent features to recreate a clear three-dimensional sound image and liv ely sound mov ement. This enables you to enjoy , at home, the rich sound effects of a li ve theater or concert hall performance.
19 Speaker Placement —Continued T o fully enjoy surround sound, the con fi guration and placement of the speakers used are important. Be sure to read through the descriptions in the previous page and sho wn belo w . This section provides the e xamples and descriptions that assume a typical situation.
20 Speaker Placement —Continued Subwoof er Using a subwoofer greatly improv es the volume le vel and sound quality of bass sounds. The subw oofer effect depends not only on the listening position but also on the shape of the listening room. • In general, place the subwoofer in a corner of the room or at a point 1/3 the width of the room.
21 Speaker Placement —Continued The following speak er placements will be av ailable according to the number of speakers connected to the TX-NR1000/TX-NR5000E.
22 Speaker Placement —Continued The TX-NR1000/TX-NR5000E has two speaker terminal blocks for speak er system [A] and [B]. This allo ws you to build tw o 7.1 ch home theater systems, and various speaker placements and connections are also a v ailable.
23 Speaker Placement —Continued Main room A: 7.1 ch speaker systems and the two additional fr ont speakers (When you want to use speaker system [A] for mo vies and enjoy 7.1 surround sound and the two additional front speakers for classic music.) • Set all the zone parameters for speaker system [A] to “ Main A.
24 Speaker Placement —Continued Main room A: 5.1 ch speaker system including the front speaker s connected through the BTL or bi- amp connections • For speaker system [A], set the surround back sp.
25 Connecting Speaker s After determining the layout of your speaker system, it is now necessary to connect the speak ers correctly to your TX-NR1000/TX-NR5000E. For the USA and Canadian models, you can also use banana plugs/connectors. Caution: Connect only speakers with an impedance between 4 and 16 Ω to the TX-NR1000/TX-NR5000E.
26 Connecting Speakers —Continued Use the SUBWOOFER PRE OUT A/B jack to connect a subwoofer with a b uilt-in power ampli fi er . If your subwoofer does not ha ve a built-in ampli fi er , connect an ampli fi er to the SUBWOOFER PRE OUT A/B jack and the subwoofer to the ampli fi er .
27 Connecting Speakers —Continued T o get more powerful sound output, you can mak e the BTL (Bridged T ransless) connection using the front and surround back speaker terminals on the TX-NR1000/ TX-NR5000E.
28 Connecting Antennas This chapter explains ho w to connect the supplied indoor FM antenna and AM loop antenna, and ho w to connect commercially av ailable outdoor FM and AM antennas.
29 Connecting Antennas —Continued If you cannot achiev e good reception with the supplied indoor FM antenna, try using a commercially av ailable outdoor FM antenna instead. Notes: • Outdoor FM antennas work best outside, but acceptable results can sometimes be obtained when installed in an attic or loft.
30 Connecting A V Components In addition to the con ventional terminals, the TX-NR1000/TX-NR5000E has v arious terminals that are capable of next- generation digital transmission.
31 Connecting A V Components —Continued • When you play the audio signal from the DIGIT AL IN terminals in Zone 2, the source will be downmixed into 2- channel analog audio signal and output to the A UDIO OUT terminals.
32 Connecting A V Components —Continued • This section describes the connections for displaying the video source or the operating information of the TX-NR1000/TX-NR5000E on a monitor device such as a TV or projector .
33 Connecting A V Components —Continued • When connecting a D VD player to the TX-NR1000/TX-NR5000E, make connections for video and audio signals using digital and analog terminals. Before making connections, refer to page 30 for correct connections.
34 Connecting A V Components —Continued • When connecting a D VD recorder or digital VCR to the TX-NR1000/TX-NR5000E, make connections for video and audio signals using digital and analog terminals. Before making connections, refer to page 30 for correct con- nections.
35 Connecting A V Components —Continued • When connecting a VCR to the TX-NR1000/TX-NR5000E, make connections for video and audio signals. Before making connections, refer to page 30 for correct connections. • This section shows the connection e xample when you use VIDEO 2 or VIDEO 3 as an input.
36 Connecting A V Components —Continued REMOTE CONTROL MAIN ZONE 3 ZONE 2 OUT IN FRONT L CENTER FRONT R SURR BACK R ( ASSIGNABLE ) SURR BACK L ( ASSIGNABLE ) SURR R SURR L IR 12V TRIGGER OUT RS 232 A B C D F G H I J K L A C B D E 200mA MAX. 100mA MAX.
37 Connecting A V Components —Continued • When connecting a DBS tuner , DBS TV , or BS/CS tuner to the TX-NR1000/TX-NR5000E, make connections for video and audio signals using digital and analog terminals. Before making connections, refer to page 30 for correct connections.
38 Connecting A V Components —Continued • When connecting a CD player to the TX-NR1000/TX-NR5000E, make connections using digital or analog termi- nals. Before making connections, refer to page 30 for correct connections. This section sho ws the connection exam- ple when you use the default audio input assignment settings.
39 Connecting A V Components —Continued • When connecting a MD recorder , D A T deck or CD recorder to the TX-NR1000/TX-NR5000E, make connections using digital or analog terminals. Before making connections, refer to page 30 for correct connections.
40 Connecting A V Components —Continued What is i.LINK i.LINK is an appellation of IEEE1394, which is the digital interface standard de fi ned by the Institute of Electrical and Electronics Engineers (IEEE).
41 Connecting A V Components —Continued Interconnection of i.LINK (A UDIO)-suppor ted Devices The i.LINK connection allows for data transfer , even if the TX-NR1000/TX-NR5000E is connected to other de vices via another i.LINK (A UDIO)-supported de vice.
42 Connecting A V Components —Continued How to Configure i.LINK Connections Selecting a Device When the i.LINK connection is ready , you can use the setup menu to select any device which is connected via i.
43 Connecting A V Components —Continued About the HDMI (High Definition Multimedia Interface) The High De fi nition Multimedia Interface (HDMI) is an interface standard for ne xt-generation TV , d.
44 Connecting A V Components —Continued Connection example when the source selection is perf ormed on the TX-NR1000/TX-NR5000E REMOTE CONTROL MAIN ZONE 3 ZONE 2 OUT IN AC INLET E ) SURR L IR 12V TRIGGER OUT RS 232 J K A C B D E 200mA MAX. 100mA MAX.
45 Connecting Components not Reached b y the Remote Contr oller Signals (IR IN/OUT) In order to use the remote contr oller to control the TX-NR1000/TX-NR5000E from a r emote location, you will need to.
46 Connecting Components not Reached b y the Remote Controller Signals (IR IN/OUT) —Continued Effective Sensor La yout In this situation, you will need to use a commercially av ailable IR emitter .
47 Connecting -compatible A V Components The terminal on the TX-NR1000/TX-NR5000E is for connecting other Onkyo components equipped with the same terminal. When a component is connected to the terminal, it can be operated by the remote controller supplied with the TX-NR1000/TX-NR5000E.
48 Basic Operation of Remote Contr oller Buttons The remote controller supplied with the TX-NR1000/TX-NR5000E is a multifunctional remote controller , so you can operate not only the TX-NR1000/TX-NR5000E but also A V components connected to the apparatus and components placed in another room.
49 Basic Operation of Remote Controller Buttons —Continued Before operating the connected component, follow the instructions on pages 124 through 133 to make appropriate settings using the remote controller .
50 Connecting the P ower/Basic Operations • Before you plug in the TX-NR1000/TX-NR5000E, con fi rm that all connections hav e been made properly . • T urning on the po wer may cause a momentary power sur ge, which might interfere with other electrical equipment on the same circuit, such as computers.
51 Connecting the P o wer/Basic Operations —Continued Before you can use the remote controller , you must perform steps 1 and 2 in the “ T urning on the Po wer ” section and place the TX-NR1000/TX-NR5000E in the standby state. T urning on the P ower fr om the Remote Controller 1 Press the scroll wheel.
52 Connecting the P o wer/Basic Operations —Continued Listening with Headphones T o listen with headphones, plug a pair of headphones with a standard stereo plug into the PHONES jack on the TX-NR1000/TX-NR5000E front panel. • When you connect headphones, no sound will be heard from the speakers.
53 Connecting the P o wer/Basic Operations —Continued Using the Sleep Timer (remote controller only) W ith the sleep timer you can set the TX-NR1000/ TX-NR5000E so that it automatically turns off after a set period.
54 Connecting the P o wer/Basic Operations —Continued Switching the Displa y While listening to or watching an input source, you can display information regarding the type of source and sig- nal being input.
55 Connecting the P o wer/Basic Operations —Continued Changing the A udio Mode The TX-NR1000/TX-NR5000E accepts analog, digital, i. LINK (A UDIO), and multichannel signals for audio input. Y ou can choose the kind of signal to be played for a speci fi c device.
56 Using the Listening Modes T ypes of Listening Modes Listening modes on the TX-NR1000/TX-NR5000E enable you to enjoy movie theater or concert hall qual- ity sounds in your room.
57 Using the Listening Modes —Continued DTS-ES Matrix This mode plays in 6.1 channels the music and movies recorded in DTS-ES. Sources recorded in DTS-ES include data for the surround back channel, and each channel is reproduced in 6.1 channels. This mode can be used with CDs, D VDs, and LDs with the mark.
58 Using the Listening Modes —Continued TV Logic This mode is suitable for television programs broadcast from studios. Y ou may feel as if you are sitting in a tele- vision studio. All of the surround sounds are enhanced, and con versations are output clearly .
59 Using the Listening Modes —Continued The TX-NR1000/TX-NR5000E provides v arious listen- ing modes. Note: The av ailable modes depend on the input signal you selected.
60 Listening to Radio Br oadcasts One of the features of the TX-NR1000/TX-NR5000E that is most frequently used is its ability to play FM and AM broadcast radio stations. The TX-NR1000/TX-NR5000E provides a number of listening modes perfect for listening to the radio and getting the most out of your audio system.
61 Listening to Radio Broadcasts —Continued Presetting a Radio Station Up to 40 stations can be stored in memory as preset radio stations. Selecting a Preset Radio Station When using the TX-NR1000/T.
62 Listening to RDS Br oadcasts (Eur opean models onl y) RDS reception is av ailable only on the European model and only in areas where RDS broadcasts are av ailable.
63 Listening to RDS Broadcasts (Eur opean models onl y) —Continued If the station you are currently tuned into is broadcasting R T signals, they will be displayed in the front display on the TX-NR5000E. If the station does not, this function will be ignored.
64 Enjo ying Multichannel Pla yback T o the TX-NR1000/TX-NR5000E, you can be con- nected up to two de vices, such as a D VD player , that deal with multichannel sounds (5.1-7.1 channels). T o use multichannel connections, you need to specify settings on the Input Setup menu.
65 Enjoying Multic hannel Playbac k —Continued Y ou can also set the listening mode in advance for mul- tichannel playback (Listening Mode Preset). T o do so, select “ Input Setup ” → “ Listening Mode Preset ” → “ Multichannel ” on the Setup menu to choose the pre- ferred mode.
66 Enjo ying Mo vies and Music in the Remote Zone (Zone 2/3) Y ou can connect speakers and ampli fi ers for the remote zone, and enjoy dif ferent sources in a remote zone (Zone 2 or Zone 3). There are three ways to enjoy in a remote zone: When Connecting Only Speaker s (Zone 2) • Y ou can enjoy a dif ferent source in a remote zone while a 5.
67 Enjoying Mo vies and Music in the Remote Zone (Zone 2/3) —Continued When Connecting the P ower Amplifier (Zone 2 or Zone 3) • Y ou can enjoy a dif ferent source in a remote zone while a 7.1 channel source is being played in the main room. • Adjust the volume le vel on the TX-NR1000/ TX-NR5000E (not on the power ampli fi er).
68 Enjoying Mo vies and Music in the Remote Zone (Zone 2/3) —Continued Operating with the Remote Controller When operating with the remote controller , how to operate depends on the location of Zone 2 or Zone 3, or the distance from the TX-NR1000/TX-NR5000E.
69 Enjoying Mo vies and Music in the Remote Zone (Zone 2/3) — Continued Recor ding a Sour ce The TX-NR1000/TX-NR5000E can not only record the playing source but can also record a source while play- ing another source. Y ou can also combine a video and audio to create a new source.
70 Recording a Sour ce —Continued Some steps can also be operated on the remote control- ler , but described here are operations on the TX-NR1000/TX-NR5000E. Notes: • No surround effects can be recorded. • No D VD or any sources whose copyright is protected can be recorded.
71 Recording a Sour ce —Continued Y ou can add audio signals from a source to a video of another source to make your o wn custom video record- ings. Below is an e xample of recording audio signals f.
72 Enjo ying Net A udio A Net-T une server is a computer serv er running Net- T une system protocol, including a Net-T une-compatible home server or a PC with Net-T une Central installed. The TX-NR1000/TX-NR5000E can be used as a Net- T une client on a standard Ethernet network.
73 Enjoying Net A udio —Continued Notes: • T o use Internet radio with the TX-NR1000/ TX-NR5000E, your broadband Internet connection needs to be up and running and able to access the W eb . Please consult your ISP if you hav e any prob- lems with your Internet connection.
74 Enjoying Net A udio —Continued T o select Net-T une mode, press the [MODE] button, and then roll the scr oll wheel until “NET -T” appears on the display .
75 Enjoying Net A udio —Continued 1 Number/letter buttons These buttons are used to enter numbers and letters when searching for music in your Net-T une server . 2 MODE button This button is used with the scroll wheel to select the remote controller modes.
76 Enjoying Net A udio —Continued T o listen to Internet radio, the connection/con fi guration requirements listed on pages 72-73 must be satis fi ed. Enjoying Internet Radio 1 While neither the [INPUT] button nor [MODE] button is illuminated, roll the scr oll wheel to select IRD (Internet Radio).
77 Enjoying Net A udio —Continued Presetting Internet Radio Stations Y ou can preset up to 30 Internet radio stations. Choosing a Preset Internet Radio Station Erasing a preset Internet radio station 7 Press the [ENTER] button. Buffering starts with the follo wing mes- sage displayed.
78 Enjoying Net A udio —Continued T o play music fi les sav ed on your PC, the requirements listed on page 72 must be satis fi ed. • T o stop playback: Press the [ ] button on the remote controller . • T o pause playback: Press the [ ] button on the remote controller .
79 Enjoying Net A udio —Continued Selecting a T rack List Y ou can use the music fi le data sav ed on the Net-T une server to select which tracks to play .
80 Enjoying Net A udio —Continued The music server settings can be made while you select the music server as an input source. Con fi guring the Music Server 1 Press the [INPUT] button, and then roll the scr oll wheel to select MSR V . Make sure that the “ MSR V ” is displayed when you con fi gure the music server .
81 Enjoying Net A udio —Continued Music Server Memo Internet Radio Memo.
82 Setup Menu When making the various settings required to configure your TX-NR1000/TX-NR5000E for optimum performance, you can use either the OSD Menu that appears on your television monitor or you can use the display on the front of the TX-NR1000/TX-NR5000E.
83 Setup Menu —Continued Main A Setup ===================== 0.Hardware Setup 1.Speaker/Output Setup 2.Input Setup 3.Listening Mode Setup 4.Audio Adjust 5.Preference 6.i.LINK Setup 7.Network Setup 8.Lock/Version 4.Audio Adjust ===================== 1.
84 Setup Menu —Continued OSD Map (MAIN B) Main B Setup ===================== 0.Hardware Setup 1.Speaker Setup 2.Input Setup 3.Audio Adjust 4.Preference 0.Hardware Setup ===================== 1.TV Format Setup 1.Speaker Setup ===================== 1.
85 Setup Menu —Continued OSD Map (ZONE 2) Zone 2 Setup ===================== 0.Hardware Setup 1.Speaker Setup 2.Input Setup 3.Listening Mode Setup 4.Audio Adjust 5.Preference Zone 2 Setup ===================== 0.Hardware Setup 2.Input Setup 3.Listening Mode Setup 4.
86 Setup Menu —Continued Y ou can change Setup Menu settings using the buttons on the front panel and on the remote controller . The illustrations here represent the remote controller . When you perform settings using the buttons on the front panel, press the [SETUP] button fi rst.
87 Har d ware Setup In this section, you will perform the initial settings for the following scenarios. • When you want to change the TX-NR1000/TX-NR5000E ’ s remote control ID. • When you want to fi x the TV Format setting to P AL or NTSC. • When you want to fi x the AM Frequency Step setting to 9 kHz or 10 kHz.
88 Speaker/Output Setup The TX-NR1000/TX-NR5000E provides a wide range of v ariations in speaker connections and speaker settings, so you hav e to specify speaker settings according to conditions of each v ariation.
89 Speaker/Output Setup —Continued Bi-Amp for Fr ont: This setting can be made only when you set the “(Speaker B) Front L/R” setting to “Main A” or “Main B. ” Select this when using the front speaker in main room B by connecting the front channel and the surround back channel to the speaker via Bi-Amp (See page 28).
90 Speaker/Output Setup —Continued Perform the setup procedure below follo wing the operating instructions described on page 86. 1. Select the unit of distance from “Unit. ” Y ou can select either “feet” or “meters. ” The default varies depending on the re gion.
91 Speaker/Output Setup —Continued This is for setting up a home theater with a THX-Ultra2 compliant speaker system. These settings will be effecti ve in the listening mode for the THX Ultra2 Cinema and THX Music Mode. The settings in the THX Audio Setup sub-menu can be configured for both “Main A” and “Main B.
92 Speaker/Output Setup —Continued Zone 2 Out, Zone 3 Out This item is displayed when “Zone 2 Out” or “Zone 3 Out” is specified for Analog 1-5 abo ve. The def ault setting for “Zone 2 Out” is “Pre Out (variable)” and for “Zone 3 Out” is “Line Out (fixed).
93 Input Setup Items described here ar e set when you pr ess the input source b uttons. The TX-NR1000/TX-NR5000E is equipped with sev eral types of jacks in addition to the standard audio and video jacks, and multiple jacks are provided for each type.
94 Input Setup —Continued Follo w procedures below to change an y setting: Hint: When you perform the procedures on the TX-NR1000/ TX-NR5000E, after selecting the input source using the input source buttons, press the [SETUP] b utton.
95 Input Setup —Continued Subwoof er Sensitivity The following are also settings for “Multichannel 1” or “Multichannel 2” (cannot be specified separately for each input source). Some D VD decks output the LFE channel at –15 dB lower than the other channels in the multichannel output.
96 Input Setup —Continued Y ou can specify a listening mode you frequently use for each input source. When a picture you like and frequently watch is a Dolby Digital source, for example, you may specify “ Dolby Digital, ” and if a CD of classical music you are fond of is a PCM source, you can specify “ Pure Audio.
97 Input Setup —Continued D .F . Mono Here, you can specify the listening mode for playing digital signals such as Dolby Digital and AA C recorded in monaural.
98 Input Setup —Continued When multiple devices are connected to the TX-NR1000/TX-NR5000E, the volume may v ary for a device e ven when v olume settings on the TX-NR1000/ TX-NR5000E are identical.
99 Listening Mode Setup This menu allows you to con fi gure the listening mode settings including audio effect and playback options. This sub-menu allows you to con fi gure the audio ef fect and playback options when you play a source in the Mono listening mode.
100 Listening Mode Setup —Continued Re-EQ On: Adjusts the soundtrack in which the treble is ov eremphasized, so that the sound is optimized for home theater . Academy On: Lowers the treble le vel and fi lters the noise when the source contains emphasized treble sound and too much hiss, such as an old mono audio movie recorded onto videotape.
101 Listening Mode Setup —Continued • When the impedance setting for “ Front L/R A ” or “ Front L/R B ” in the Speaker Impedance sub-menu is set to “ 6 ohms ” or “ 4 ohms, ” the av ailable options will be “ A ” and “ B. ” A (Default): Outputs the source from the speakers connected to the FR ONT L/R SPEAKERS A terminals.
102 Listening Mode Setup —Continued • When the settings for “ (Speaker A) Surr Back ” and “ (Speaker B) Surr Back ” in the Speak er Con fi guration sub-menu differ , the available options will be “ A ” and “ B. ” A (Default): Outputs the source from the speakers connected to the SURR B A CK L/R SPEAKERS A terminals.
103 Listening Mode Setup —Continued A (Default): Outputs the source from the speaker connected to the CENTER SPEAKERS A terminal. B: Outputs the source from the speaker connected to the CENTER SPEAKERS B terminal. A+B: Outputs the source from the speakers connected to the CENTER SPEAKERS A and CENTER SPEAKERS B terminals.
104 Listening Mode Setup —Continued PLIIx Music: Plays a 5.1ch source as a 6.1 or higher channel source using the Dolby Pro Logic IIx Music mode. NEO:6: Plays a 5.1ch source as a 6.1 or higher channel source using the DTS NEO:6 mode. Off (Default): Plays an original 5.
105 Listening Mode Setup —Continued A+B: Outputs the source from the subwoofers connected to the SUBWOOFER PRE OUT A and SUBWOOFER PRE OUT B terminals. Not Used: No subwoofers are used for playback. This sub-menu allows you to con fi gure the audio ef fect and playback options when you play a Super Audio CD input from the i.
106 Listening Mode Setup —Continued g. Surr Bk Speaker This option con fi gures the surround back speakers to use when the TX-NR1000/TX-NR5000E plays a Super Audio CD. Select the speaker terminals to which the speakers you want to use are connected.
107 Listening Mode Setup —Continued On: Adjusts the soundtrack in which the treble is ov eremphasized, so that the sound is optimized for home theater . f. Fr ont Speaker This option con fi gures the front speakers to use when playing the source in the Dolby Digital listening mode.
108 Listening Mode Setup —Continued This sub-menu allows you to con fi gure the audio ef fect and playback options when you play a source in the DTS listening mode. a. LFE Level This option allows you to set the bass le vel for the DTS listening mode.
109 Listening Mode Setup —Continued g. Surr Bk Speaker This option con fi gures the surround back speakers to use when playing the source in the DTS listening mode.
110 Listening Mode Setup —Continued e. Center Speaker This option con fi gures the center speaker to use when playing the source in the AA C listening mode.
111 Listening Mode Setup —Continued PLIIx Game: Plays a 2ch source as a 6.1 or higher channel source using the Dolby Pro Logic IIx Game mode. NEO:6 Cinema: Plays a 2ch source as a 6.1 or higher channel source using the DTS NEO:6NEO:6 Cinema mode. NEO:6 Music: Plays a 2ch source as a 6.
112 Listening Mode Setup —Continued i. Surr L/R Sp This option con fi gures the surround speakers to use when playing the source in the Dolby Pro Logic IIx or DTS NEO:6 listening modes. Select the speaker terminals to which the speakers you want to use are connected.
113 Listening Mode Setup —Continued Games Mode: In this new mode for the THX Ultra2, the TX-NR1000/TX-NR5000E plays 5.1ch game source as a 7.1 or higher channel source. c. THX Mode (2ch) This option allows you to select which THX mode the TX-NR1000/TX-NR5000E will use when applying the THX effect to the signal.
114 Listening Mode Setup —Continued B: Outputs the source only from the subwoofer connected to the SUBWOOFER PRE OUT B terminal. A+B: Outputs the source from the subwoofers connected to the SUBWOOFER PRE OUT A and SUBWOOFER PRE OUT B terminals. Not Used: No subwoofers are used for playback.
115 Listening Mode Setup —Continued • When the settings for “ (Speaker A) Surr Back ” and “ (Speaker B) Surr Back ” in the Speak er Con fi guration sub-menu differ , the available options will be “ A ” and “ B. ” A (Default): Outputs the source from the speakers connected to the SURR B A CK L/R SPEAKERS A terminals.
116 Listening Mode Setup —Continued e. Surr Bk Speaker This option con fi gures the surround back speakers to use when playing the source. Select the speaker terminals to which the speakers you want to use are connected.
117 Listening Mode Setup —Continued A+B: Outputs the source from the speakers connected to the SURR L/R SPEAKERS A and SURR L/R SPEAKERS B terminals. e. Subw oofer This option con fi gures the subwoofer to use when playing the source. Select the terminal to which the subwoofer you want to use is connected.
118 A udio Adjust Y ou can adjust bass, mid, and treble notes for each speaker set. • For an y speaker set to “ Not Used ” in the Speaker Con fi guration sub-menu, no associated setting item is displayed. Front Bass Option for adjusting bass notes from front L/R speakers.
119 Preferences This menu allows you to con fi gure the listening mode settings including audio ef fects and playback options. a. V olume Display Y ou can switch the volume indication between an absolute value and a relati ve v alue. Absolute (absolute value): Displayed in a range from 0 to 100.
120 i.LINK Setup This menu can be used when connecting to an Onkyo i.LINK (A UDIO)-ready device. a. W akeup on i.LINK (IEEE1394) Specify connecting condition on standby of the TX-NR1000/TX-NR5000E. Enable: T o be left connected. Disable (Default): T o be disconnected while the TX-NR1000/TX-NR5000E is on standby to sav e electricity .
121 Netw ork Setup If using a broadband router (DHCP function), you need not perform “ 7. Network Setup ” because the DHCP function on the TX-NR1000/TX-NR5000E is defaulted to “ Enable. ” When the DHCP function for the broadband router is set to “ Disable, ” network setup is required.
122 Network Setup —Continued While the system sending information is called a server , the machine receiving the data is called a “ client. ” Multiple clients can be connected to a single server . From the viewpoint of Net-T une Central, the TX-NR1000/TX-NR5000E is a client.
123 Loc k/V ersion Setup The following sub-menus allo w you to lock your settings or display the software v ersion of the TX-NR1000/ TX-NR5000E. a. Lock Y ou can lock all of the setting menus to prev ent settings from being changed by mistake.
124 Operating Onky o Pr oducts Using the Remote Contr oller The RC-557M/558M remote controller is a useful tool that can operate not only the TX-NR1000/TX-NR5000E, but also all the other components of your home theater .
125 Operating Onky o Products Using the Remote Contr oller —Continued 1 ON button This button is used to turn on the D VD player . 2 ST ANDBY button This button is used to set the D VD player to Standby .
126 Operating Onky o Products Using the Remote Contr oller —Continued CD mode is used to control an Onkyo CD player con- nected to the TX-NR1000/TX-NR5000E via . To select CD mode, press the [MODE] b utton, and then roll the scr oll wheel until “CD” appears on the dis- play .
127 Operating Onky o Products Using the Remote Contr oller —Continued F Play [ ] button This button is used to start CD playback. G Stop [ ] b utton This button is used to stop CD playback. H RANDOM button This button is used with the random playback func- tion.
128 Operating Onky o Products Using the Remote Contr oller —Continued T ape mode is used to control an Onkyo cassette recorder connected to the TX-NR1000/TX-NR5000E via . T o select T ape mode, press the scroll wheel, placing your r emote controller into “ AMP” mode .
129 Using the Remote Contr oller with Other Components Y ou can use the TX-NR1000/TX-NR5000E ’ s remote controller (RC-557M/558M) to control your other A V components, including those made by other manufac- turers. T o do this you can: • Enter a remote control code for the component that you want to control (e.
130 Using the Remote Controller with Other Components —Continued Remote Control Codes When two or more codes are gi ven, try each one in turn, and choose the one that works best.
131 Using the Remote Controller with Other Components —Continued SA T (satellite tuner) Manufacturer Control code Universum 4021, 4024 V ortec 4017 Wela 4025 Zehnder 4020 Zenith 4032 CBL (cable rece.
132 Using the Remote Controller with Other Components —Continued VCR Manufacturer Control code RCA 2001, 2002, 2003, 2008, 2010, 2013, 2021, 2023, 2025, 2026, 2027 Realistic 2007, 2008, 2010, 2011, .
133 Using the Remote Controller with Other Components —Continued TV Manufacturer Control code Loewe 1014, 1040, 1055 Luxman 1004, 1006 LXI 1001, 1006, 1010, 1014, 1016, 1017, 1034 M Electronic 1035,.
134 Using the Remote Controller with Other Components —Continued Controlling a Satellite T uner 1. Roll the scroll wheel to select the input sour ce and the remote contr oller mode for y our satellite tuner . Perform this operation while both the [MODE] and [INPUT] buttons are not illuminated.
135 Using the Remote Controller with Other Components —Continued Controlling a TV 1. Roll the scroll wheel to select the input sour ce and the remote contr oller mode for y our TV . Perform this operation while both the [MODE] and [INPUT] buttons are not illuminated.
136 Using the Remote Controller with Other Components —Continued Y ou can teach the TX-NR1000/TX-NR5000E ’ s remote controller new commands simply by transmitting com- mands from another remote controller one at a time.
137 Using the Remote Controller with Other Components —Continued W ith the Macro function you can program the remote controller to perform a sequence of actions with one press of a button. F or example, normally you need to perform the following actions to use a CD player that ’ s connected to the TX-NR1000/TX-NR5000E: 1.
138 Using the Remote Controller with Other Components —Continued Running Macros Programmed macros can be run as follows. Naming Macros Y ou can name your macros as follows. Names may con- tain of up to fi ve characters. 1 Press the [MA CRO] b utton.
139 Other Settings f or the Remote Contr oller Adding New Remote Contr oller Modes Y ou can add additional modes (D VD, TV , VCR, CBL, SA T) to the remote controller .
140 Other Settings for the Remote Contr oller —Continued Deleting Remote Controller Modes Y ou can delete remote controller modes that you don ’ t need, such as modes for components that you don ’ t hav e.
141 Other Settings for the Remote Contr oller —Continued Y ou can reset the remote controller to its default set- tings. Y ou can set the remote controller ’ s transmission signal format to either infrared (IR) or radio frequency (RF). The default setting is IR.
142 Other Settings for the Remote Contr oller —Continued This section explains ho w to change the remote control- ler ’ s ID. Y ou may need to change this if the TX-NR1000/TX-NR5000E ’ s remote controller inter - feres with other Onkyo components located in the same room.
143 Relationship Between Input Sour ce and Listening Mode Button Input Signal Format PCM Dolby Digital Dolby Digital/AA C AAC Analog Multichannel Multichannel ( */2) Multichannel (Other than */2) 2ch 1/0 1+1 5.1ch 7.1ch T ype of source Listening mode CD, TV , LD, VHS, MD, V inyl, Radio, Cassette, Cable, Satellite, etc.
144 Relationship Between Input Source and Listening Mode —Continued *2 NEO:6-96k Button Input Signal Format DTS DTS96/24 Discrete/ Matrix Multichanne l ( */2) Multichannel ( Other than */2) 2/0 1/0 Multichannel ( */2) Multichannel ( Other than */2) Matrix 2ch 1/0 T ype of source Listening mode D VD, LD, CD, etc.
145 Relationship Between Input Source and Listening Mode —Continued Button Input Signal Format i.LINK(IEEE1394):D VD-A udio i.LINK(IEEE1394): SA CD Multichannel ( */2) Multichannel ( Other than */2) 2/0 1/0 1+1 176.
146 T r oub leshooting If you hav e any trouble using your TX-NR1000/TX-NR5000E, look for a solution in this section. If you can ’ t resolv e the issue yourself, contact the dealer from whom you purchased this unit. Can ’ t turn on the TX-NR1000/TX-NR5000E? • Make sure that the po wer cord is properly plugged into the wall outlet.
147 T roub leshooting —Continued Can ’ t get 6.1 or 7.1 playback? • If no surround back speakers are connected, or Zone 2/3 is being used, 6.1 and 7.1 playback is not possible. • If the “ SB Mode (5ch) ” is av ailable in any sub-menu of the “ Listening Mode Setup ” menu, make sure that it is not set to “ Off ” (pages 102-109).
148 T roub leshooting —Continued Can ’ t learn commands from other remote contr ol- lers? • Make sure that the transmitting ends of both remote con- trollers are pointing at each other .
149 T roub leshooting —Continued “ Not av ailable with Headphones use ” • Operation not allowed while a pair of headphones is con- nected. “ Not av ailable in this Sp Con fi g ” • Doesn ’ t work with the current speak er con fi guration.
150 Specifications General Amplifier Section Power Supply Rating North American and some Asian models: A C 120 V , 60 Hz European & Australian models: A C 230-240 V , 50 Hz Asian models: A C 220-230 volts, 50 Hz Consumption Power USA & Canadian models: 13.
151 Speci fi cations —Continued T uner Section FM AM Speci fi cations and features are subject to change without notice. Output Lev el and Impedance: A udio A UDIO 1-5: 200 mV , 470 Ω (T ape 1/2.
SN 29343668 Printed in Japan D0409-1 Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8023 Fax: 072-831-8124 ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.
デバイスOnkyo TX-NR1000の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Onkyo TX-NR1000をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはOnkyo TX-NR1000の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Onkyo TX-NR1000の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Onkyo TX-NR1000で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Onkyo TX-NR1000を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はOnkyo TX-NR1000の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Onkyo TX-NR1000に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちOnkyo TX-NR1000デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。