Optima CompanyメーカーPCの使用説明書/サービス説明書
ページ先へ移動 of 20
OPtima PC Contents 1. Introduction ................................................................................................................................................ 2 2. Installation .....................................................
1660-IN-010-0-04 Page 2 1. Introduction The OPtima PC is made up of a single board computer with a 233 Mhz proces- sor . It has 1 PCI expansion slot and 2 ISA expansion slots. External connectors are provided for 1 parallel port and 1 serial port. Connectors are also provided for attaching an external monitor and keyboard.
1660-IN-010-0-04 Page 3 5.481 0.075 1.423 Figure 1. Model DSA2 Dimensions for Flange Mount Remove cover for access to expansion slots. Parallel port PCI expansion slot Serial port (COM1) CRT port Inte.
1660-IN-010-0-04 Page 4 0.750 6.979 16.742 Shock mounts are 1/4-20 threads Remove cover for access to expansion slots. ISA expansion slot ISA expansion slot Serial port (COM1) CRT port Internal keyboa.
1660-IN-010-0-04 Page 5 Figure 3. Model DSB2 Dimensions for Flange Mount 17.842 19.400 .455 2.200 .779 7.500 7.500 1 1.640 12.550 1 1.000 .775 6.575 .375 .
1660-IN-010-0-04 Page 6 6.86 (139.7) 4.0 (101.6) Cable Clearance 0.688 (17.5) 6.0 (152.4) 3.0 (76.2) 2.1 (53.3) 2.5 (63.5) 5.5 (139.7) 5.1 (129.5) #6 tap thru (4) Cutout and Mountin g Pattern External Floppy Drive Dimensions shown in inches; millimeters in parenthesis ( ).
1660-IN-010-0-04 Page 7 2.4 Adding Hardware Observe proper ESD precautions (use an appropriately grounded wrist strap or similar device) when installing any device. 2.4.1 Adding Boards The OPtima PC has 1 PCI expansion slot and two ISA slots. Access to these slots is through a cover (at the top of the DSA2; the side of the DSB2).
1660-IN-010-0-04 Page 8 2. Power up the OPtima. From Control Panel (in Settings ) select Add/Remove Programs and click Install . Insert the SW-LNET -INT disk in the floppy drive and select “A:setup.exe.” Install the file to the C:ModiconWinConXMBX Driver di- rectory .
1660-IN-010-0-04 Page 9 2.4.3 Adding Memory T wo slots of 72 pin SIMM (Single In-line Memory Module) sockets are available for on-board system DRAM (one slot is occupied by the standard 64 M of memory). T o insert a SIMM, place it in at a moderate angle.
1660-IN-010-0-04 Page 10 T o set supervisor/user BIOS passwords, first connect an external keyboard (for the Page Up/Page Down function). Press Del on power up. This takes the computer into the A W ARD BIOS setup. When the setup screen comes on, select the supervisor password.
1660-IN-010-0-04 Page 11 5.2 Installing the Wonderware License If Wonderware has been installed, before using the application the end user must first install the Wonderware License. T o do this, perform the following steps: 1. Select InT ouch from the Start menu.
1660-IN-010-0-04 Page 12 7. Keyboard Functionality (Model DSA2 only) This proprietary keyboard sends standard PC keyboard codes. Note that only one key can be pressed at a time. Note that a “button template” (“OPtima PC Button T emp.doc”) for creating key labels is included in the “Other Files” folder of the instruction manual CD.
1660-IN-010-0-04 Page 13 7.2.1 Special Cases The shift keys are used for the following special function: CTL-AL T -DEL: Y ellow Shift (release), CTL (release); Y ellow Shift (release), AL T (release); Y ellow Shift (release), DEL (release).
1660-IN-010-0-04 Page 14 9. Automatic Logon to Windows NT Since the Model DSB2 OPtima PC has no built-in keyboard functions, it is shipped from the factory with the Windows NT AutoLogon feature enabled.
1660-IN-010-0-04 Page 15 10. T roubleshooting/Application Tips Note: In ANY situation that requires the unit to be open, proper shutdown and ESD precautions MUST be followed. Front keypad or touchscreen stops working: Plug in an external keyboard (a Windows 95 keyboard will give you the Start key .
1660-IN-010-0-04 Page 16 1 1. Disconnecting the Display If for any reason it is necessary to open the case, it may also be necessary to disconnect and remove the display from the rest of the case.
1660-IN-010-0-04 Page 17 • Storage/Network Use. If the SOFTW ARE PRODUCT is installed on the SYSTEM over an internal network from a server , you must acquire and dedi- cate a license for the SOFTW ARE PRODUCT for each SYSTEM on which the SOFTW ARE PRODUCT is used or to which it is distributed.
1660-IN-010-0-04 Page 18 3. UPGRADES AND RECOVERY MEDIA • If the SOFTW ARE is provided by Manufacturer on media separate from the SYSTEM and is labeled “For Upgrade Purposes Only” (“Upgrade SO.
1660-IN-010-0-04 Page 19.
Copyright © 2001 Barber-Colman Company Barber-Colman Company / Eurotherm Controls, Inc. 741-F Miller Drive, Leesburg, V A 20175 Phone: 703-443-0000 Fax: 703-669-1300 http://www .
デバイスOptima Company PCの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Optima Company PCをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはOptima Company PCの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Optima Company PCの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Optima Company PCで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Optima Company PCを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はOptima Company PCの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Optima Company PCに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちOptima Company PCデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。