Accton Technologyメーカー8seの使用説明書/サービス説明書
ページ先へ移動 of 21
7Rde6eYVc9fS)dV 7Rde6eYVc9fS"#dV :_deR]]ReZ`_>R_fR].
Installation M anual 7Rde6eYVc9fS)dV 7Rde6eYVc9fS"#dV Stackabl e Fast E thernet Hub with 8/12 10BASE-T/100B ASE-T X Ports.
Fast EtherHub Inst allation Manual 1 INTRODUCTION General Descriptio n The EH3008C and EH3012C 100BASE-TX 8/12 port stackable hub s are entry lev el 100Mb ps Fast Et hernet hu bs. They a re built arou nd a standard 19-inch cha ssis which al lows stand-alon e or rack-mounted operation.
Fast EtherHub Inst allation Manual 2 Key Features ❑ Compliant with the I EEE802 .3u 100Mb ps repeater specification ❑ 8/12 100BASE-TX ports for Fast Et hernet connectivity ❑ 19- in ch rack moun .
Fast EtherHub Inst allation Manual 3 Package Contents Check your p ackage cont ents for the following parts: æ 8/12 port 100BASE-TX Fast Ethernet St ackable Hub (Fast EtherHu b-8se or F ast EtherH ub.
Fast EtherHub Inst allation Manual 4 Hardware De scri ption The Front Panel The front panel contains the 8/12 Shie lded Twisted-P air (STP) port s, one uplink port, a nd LED indicat ors. Shielded Twisted- Pair (STP) ports Use any one of the STP ports for co nnection to a 100BASE-TX node using Category 5 UTP cabling.
Fast EtherHub Inst allation Manual 5 LED indicators The front panel LED indicators help you monitor t he status of each port and connected segments. There are 4 differ ent LEDs on the front pa nel; including power (PWR), collision (COL), LINK/ACTIVITY and ERROR.
Fast EtherHub Inst allation Manual 6 The Rear Panel The rear p anel of the hub contai ns the po wer socket , 2 D-S ub connectors (2 5 pins) a nd air f ans.
Fast EtherHub Inst allation Manual 7 HARDWARE INSTALLATION Quick Installation Procedur e 1. Place the hub on a smooth surfa ce or mount it on a rack. 2. Connect power cor d to hub and plug in. 3. Connect workstat ions to hub using Catego ry 5 UTP cabling .
Fast EtherHub Inst allation Manual 8 Select an Appropriate Location A good location is at or near the center of all the computers you w ant to link , close to the tr un k seg m e nt and th e other device s you wan t to connect , and near a convenie nt p ower out let.
Fast EtherHub Inst allation Manual 9 Setting Up 100BASE-TX Stackable Hubs 1. Put t he 100BASE-TX st ackable hu b on the f lat surf ace. ? Ensure the po wer is off before st acking t he hub . 2. Attach th e power cord an d turn o n power to th e hub. 3.
Fast EtherHub Inst allation Manual 10 CONFIGURATION Standard-Alone The configuration of a simple st and-alone hub is illustr ated as below. The maximum distan ce between the hub a n d the workstation is 100 meters.
Fast EtherHub Inst allation Manual 11 Uplink Multiple Hubs If you wa nt to c onnect m ore than 8/ 12 port s, you c an use the u plink port t o connect to another hub. I n complianc e with t he IEE E802.3u Class II specific ation, t wo repeaters can be ca scaded u sing 5 met ers of cable in a sin gle collision domain.
Fast EtherHub Inst allation Manual 12 Stacking Multiple Hubs The 100BASE-TX stackable hub comes with stackable backplane port for cascading up to 4 hu bs. A s your networ k grows, t his stack able feature allows you to add additiona l units for exp ansion.
Fast EtherHub Inst allation Manual 13 TROUBLESHOOTING This chapter c ontains info rmation to help you solve prob lems. If these hubs are not funct ioning properly, ma ke sure they were set up according to instruct ions in this m anual. If the hubs don ’ t connect to the network : ➊ Check the LINK/ACTIV ITY LED ligh ts on the front pa nel.
Fast EtherHub Inst allation Manual 14 Other Important Tips ➀ Make sure no more t han 100 meters of c able are used b etween the hub an d the des ktop.
Fast EtherHub Inst allation Manual 15 PRODUCT SPECIFICATIONS Stand ard IEEE802.3u, 100BASE-TX Class I and II repeater 100BASE-TX UTP ports 8/12 Uplink po r t Hub port # 8/12 Cable D istance 5 meters f.
Fast EtherHub Inst allation Manual 16 EMI War ning FCC Class A Certification This device complies with Part 15 of the FCC Rules. Oper ation is subje ct to the f ollo win g cond i tion s: 1.
Fast EtherHub Inst allation Manual 17 CE Mark Declaration of Conformance This is to certify that thi s p r o duct complies with ISO/IEC G uide 22 and EN45014.
18 Warranty Accto n w arrants to the o rigi nal o w ner tha t the pr oduct del ive re d in this pa ckag e w ill be free from defects i n material and workmans hip for the lifeti me of the prod uc t.
EH3008C EH3012C E0797-R01.
デバイスAccton Technology 8seの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Accton Technology 8seをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAccton Technology 8seの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Accton Technology 8seの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Accton Technology 8seで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Accton Technology 8seを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAccton Technology 8seの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Accton Technology 8seに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAccton Technology 8seデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。