Orient TechnologiesメーカーBTP-M280Bの使用説明書/サービス説明書
ページ先へ移動 of 39
USER’S MANUAL Imp act Receipt Printer BTP-M280 Shandong New Beiyang Information T echnology Co., Lt d..
BTP-M280 User ’s Manual - 1 - Content s 1 OVERVIE W ..................................................................................................................... ..........................3 1.1 O UTLINE ......................................
BTP-M280 User ’s Manual - 2 - 4.7 C ONNECTING THE C ASH D RA WER ........................................................................................................12 4.8 I NST ALLING R IBBON ....................................................
BTP-M280 User ’s Manual - 3 - 7.2 P RINTER DOE SN ’ T W ORK ..................................................................................................................... 34 7.3 E RROR LED AND B UZZER .......................................
BTP-M280 User ’s Manual - 1 - Declaration Information in this document is subject to change without notice. SHANDONG NEW BEIY ANG INFORMA TION TECHNOLOGY CO., L TD. (hereinafter referred to as “SNBC”) reserves the ri ght to improve products as new technology , components, so ftware, and firmware become available.
BTP-M280 User ’s Manual - 2 - General Safety Instruction Before installing and using the printer , please read the following items carefully: 1. Safety Instructions W arning: Do not touch the t ear-off bar of the printer .
BTP-M280 User ’s Manual - 3 - 1 Overview 1.1 Outline The BTP-M280 is a 9-pin serial imp act dot matrix receipt printer offering high quality , high speed, and stable performance. It is widely used in real-time printing on-site, such as POS system, kitchen and finance applications.
BTP-M280 User ’s Manual - 4 - 2 S pecifications 2.1 Main Specification Item Specification Print mode 9-pin serial impact dot matrix Print speed Max. 4.7LPS (400 dots/line) Print width Max. 400(half dots)/200(full dots) Paper type Continuous paper or marked paper Single layer Paper width: 80±0.
BTP-M280 User ’s Manual - 5 - 2.2 Cutter specification Item Parameters Remark Cut method Sliding blade Cut time 600ms Time for one cutter action Cut interval 2s 30 cuts/minutes (Max.) Adapt Paper 65 ～ 100 μ m Normal paper with same thickness Operation voltage 24VDC Max.
BTP-M280 User ’s Manual - 6 - Caution: Do not paste the p aper to the core. 2.4 Ribbon specification 2.4.1 Ribbon model Model Color ERC-38 （ P ） Purple ERC-38 （ B ） Black ERC-38 （ B/R ） Black / Red 2.
BTP-M280 User ’s Manual - 7 - 2.5 Print and Tear-off Position 2.5.1 Print position L1: Paper width L2: Print width L3: Print left margin L4: Print right margin According to the different p aper widt.
BTP-M280 User ’s Manual - 8 - 3 Outline and Part s 3.1 Outline and Parts 1—Back cover 2—T ear-off bar 3—Front cover 4—POWER LED 5—ERROR LED 6—P APER LED 7—FEED button 8—Power switch .
BTP-M280 User ’s Manual - 9 - 5) Power switch （ 8 ） T urn on/off t he printer . “O” is to turn off the printer; “—” is to turn on the printer . 6) Back cover latch （ 9 ） Catch back cover latch and pull it out to open the back cover .
BTP-M280 User ’s Manual - 10 - 4 Inst alling 4.1 Unpacking When unpacking, you should check w hether all part s are present and undamaged in accordance with the packing list. If any p art is missing or damaged, please contact SNBC or your local agent.
BTP-M280 User ’s Manual - 11 - 4.2.2 Wall-mounting (optional) W all-mount is an optional function. Th e wall-mount mode is shown as below . 1 ） T wo 50mm-deep holes should be made with a hammer-d rill in a suitable wall, of the sizes shown below .
BTP-M280 User ’s Manual - 12 - 4.4 Connecting the Power Adapter 1) With the flat side of the po wer adapter’s cabl e connector facing downward, insert the cable connecto r into the power connector on the backside of the printer. 2) Turn on the input powe r source of the adaptor.
BTP-M280 User ’s Manual - 13 - 3) Turn the ribbon knob two or three times according to the mark to tighten the ribbon. 4) Refer to the figure to install ribbon to the correct position. 5) Turn the ribbon knob two or three times according to mark to tighten the ribbon again.
BTP-M280 User ’s Manual - 14 - 3 ） Ensure the paper head is trimmed and drop the paper roll into the paper cabinet. 4 ） Pull a certain length of paper along the paper-out dire ction, then close the back cover and tear off the surplus paper. Caution ： User should adjust the paper guide accordi ng to the width of paper roll being used.
BTP-M280 User ’s Manual - 15 - 4.11 Installing the Printer Driver BTP-M280 printer offers the drivers under Windows 98/Windows NT4.0/Windows 2000/Win dows XP/Windows server 2003/Windows Vista wi th the installing step s as below . 4.11.1 Typical setup 1) Run “Setup.
BTP-M280 User ’s Manual - 16 - 3) Select the setup type “Typic al”, then click “Next” button. Select the current system type and click “Next” button. 4) Set printer port. The default port is “LPT1”. Us er can install it based on actual port.
BTP-M280 User ’s Manual - 17 - 4.11.2 Advanced setup Advanced setup is mainly used for users who ha ve special requirements for printer drivers. Compared with typical setup, advanced setup can support the divers installation of Multi USB printers and has the function of printer driver mode se tting.
BTP-M280 User ’s Manual - 18 - 3) Select the setup type “Advanc ed”, then click “Next” button. 4) Select the current system type and click “Next” button. 5) Set driver mode and printer port of the printer . Def ault settings are: port is "LPT1" as default port and supporting Multi USB printers.
BTP-M280 User ’s Manual - 19 - 4.11.3 Installing the USB device driver If printer is using a USB interface to communicate, bef ore installing the printer driver, the user nee ds to install the USB device driver first.
BTP-M280 User ’s Manual - 20 - 3) Click "Continue Anyway" on the digital signature interface. 4) Click on "Finish" to end the installation. ¾ Windows 98/Me system 1) Connect USB interface of the printer with idle U SB interface of the PC Usi ng USB cable.
BTP-M280 User ’s Manual - 21 - 2) Select "Search for the best driver in these loca tions" and "Include this loca tion in the search", then Click on "Browse..." to browse the driver program. Default directory is “Driver installing packageUSBDRV2.
BTP-M280 User ’s Manual - 22 - 7) Take metric CM as measurement units. Define paper width, length, right/left and up/down margin of the printing area according to user’s own need.
BTP-M280 User ’s Manual - 23 - Optional paper type: roll paper and marked p aper ¾ Color choose In this option, user can choose Co lor or black and white. Only when us er chooses Color they can print two colors. ¾ Setting resolution parameter BTP-M280 driver supports three kinds of resolutions: 160 x 144 d pi, 160 x 72 dpi, 80 x 72 d pi.
BTP-M280 User ’s Manual - 24 - ¾ Single/ Bi-directional print setting Set single/bi-directional print settings via this option. ¾ Operation option User can set different setting of page via this option: st art of document, start of page, end of p age, end of document.
BTP-M280 User ’s Manual - 25 - ¾ Document setting option User can set parameters via this option on the start of document, end of document, start of page and end of page; Cash drawer (Cash drawer1,.
BTP-M280 User ’s Manual - 26 - ¾ Download User can download firmware and Logo via this option. ¾ Font User can select driver supported f ont and font size via this option.
BTP-M280 User ’s Manual - 27 - ¾ V ersion information User can see the printer driver ve rsion information via this option..
BTP-M280 User ’s Manual - 28 - 5 Maintenance Caution ： For daily maintenance be sure the printer is turned off. Do not use gasoline, acetone or other organic liquids to clean any parts of the printer . When cleaning the sensor , please leave the printer off until the alcohol completely dried.
BTP-M280 User ’s Manual - 29 - 1) T urn off the printer 2) Pull the latch to open the back cover of the printer 3) Check if there is any paper in the p aper path, if necessary , clear the jammed paper . 4) Close the back cover and finish clearing paper jam.
BTP-M280 User ’s Manual - 30 - 6 Interface Signal The BTP-M280 can be connected with other devices via USB, p arallel, serial, Ethernet and WLAN interface, USB interface is a fixed interface of the printer and other interfaces are optional. 6.1 USB interface The printer USB interface supports USB1.
BTP-M280 User ’s Manual - 31 - 6.3 Serial interface The printer serial interface is compatible with RS-232 standard, of which the outlet is 25 PIN female D type.
BTP-M280 User ’s Manual - 32 - 3) Electrical features ¾ Output signal: The available differential mode voltage is more than 450mV ， and peak voltage is less than 13V .
BTP-M280 User ’s Manual - 33 - 6.6 Power interface definition 1) Pin definition 1: Positive pole (+24V) 2: Cathode （ GND ） 3: NC 2) Interface type Printer end should use: Unet op DC-002 or equival ent product. User end should use: Unetop DP-002 or equi valent product.
BTP-M280 User ’s Manual - 34 - 7 T roubleshooting In case of printer fault, consult th is se ction for solutions and advice. If you do not find a solution in this section, please contact your local dealer for assist ance.
BTP-M280 User ’s Manual - 35 - 7.5 Problems during Using Driver Problems Possible causes Solution Printer can not print when using USB interface Device driver is not installed.
デバイスOrient Technologies BTP-M280Bの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Orient Technologies BTP-M280Bをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはOrient Technologies BTP-M280Bの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Orient Technologies BTP-M280Bの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Orient Technologies BTP-M280Bで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Orient Technologies BTP-M280Bを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はOrient Technologies BTP-M280Bの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Orient Technologies BTP-M280Bに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちOrient Technologies BTP-M280Bデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
