AsusメーカーM2V-TVMの使用説明書/サービス説明書
ページ先へ移動 of 82
Motherboard M2V-TVM.
i i Copyright © 2006 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a r.
iii Contents Notices ................................................................................................ vi Safety information ..............................................................................vii M2V-TVM specications summary .
i v Contents 2.1 Managing and updating your BIOS ........................................ 2-2 2.1.1 Creating a bootable oppy disk .............................. 2-2 2.1.2 Using AFUDOS to update the BIOS ......................... 2-3 2.1.3 Using AFUDOS to copy BIOS from PC .
v Contents 2.6.1 Boot Device Priority .............................................. 2-29 2.6.2 Boot Settings Conguration ................................. 2-30 2.6.3 Security ................................................................. 2-31 2.
v i Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
vii Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
viii M2V-TVM specications summary (continued on the next page) C P U Chipset System Bus Memory Expansion slots Graphics Storage Audio LAN USB 2.0 Special features Backpanel I/O ports Support AMD so.
i x M2V-TVM specications summary Internal I/O connectors BIOS features Manageability Support CD contents Form factor 2 x USB connector supports additional 4 USB ports 24-pin ATX power connector 4-p.
x.
1 Product introduction This chapter describes the motherboard features and the new technologies it supports..
1-2 Chapter 1: Product introduction 1.1 Welcome! Thank you for buying an ASUS ® M2V-TVM motherboard! The motherboard delivers a host of new features and latest technologies, making it another standou.
ASUS M2V-TVM 1-3 DDR2 memory support The motherboard supports DDR2 memory which features data transfer rates of 667 MHz/533 MHz to meet the higher bandwidth requirements of the latest 3D graphics, multimedia, and Internet applications.
1-4 Chapter 1: Product introduction 1.3.2 Innovative ASUS features ASUS EZ Flash With ASUS EZ Flash, you can easily update the system BIOS even before loading the operating system. No need to use a DOS-based utility or boot from a oppy disk. See page 2-5 for details.
ASUS M2V-TVM 1-5 Onboard LED The motherboard comes with a standby power LED that lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component.
1-6 Chapter 1: Product introduction 1.5.1 Motherboard layout 1.5 Motherboard overview M2V -TVM ATX12V COM1 VGA Parallel Port PS2/2KBMS T:Mouse B:Keyboard CPU_FAN EATXPWR DDR2 DIMM_A1 (64 bit, 240-pin .
ASUS M2V-TVM 1-7 M2V -TVM Do not overtighten the screws! Doing so can damage the motherboard. 1.5.2 Placement direction When installing the motherboard, make sure that you place it into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis as indicated in the image below.
1-8 Chapter 1: Product introduction 1.6 Central Processing Unit (CPU) The motherboard comes with a 940-pin AM2 socket designed for the AMD Athlon™ 64 X2/AMD Athlon™ 64/AMD Sempron™ processor. Make sure you use a CPU is designed for the AM2 socket.
ASUS M2V-TVM 1-9 3. Position the CPU above the socket such that the CPU corner with the gold triangle matches the socket corner with a small triangle. 4. Carefully insert the CPU into the socket until it ts in place. The CPU ts only in one correct orientation.
1-10 Chapter 1: Product introduction 1.6.2 Installing the heatsink and fan The AMD Athlon™ 64 X2/AMD Athlon™ 64/AMD Sempron™ processor require a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. Follow these steps to install the CPU heatsink and fan.
ASUS M2V-TVM 1-11 2. Attach one end of the retention bracket to the retention module base. 3. Align the other end of the retention bracket (near the retention bracket lock) to the retention module base. A clicking sound denotes that the retention bracket is in place.
1-12 Chapter 1: Product introduction 1.7.2 Memory configurations You may install 256 MB, 512 MB, and 1 GB unbuffered non-ECC DDR2 DIMMs into the DIMM sockets. 1.7 System memory 1.7.1 Overview The motherboard comes with two Double Data Rate 2 (DDR2) Dual Inline Memory Modules (DIMM) sockets.
ASUS M2V-TVM 1-13 Qualified Vendors Lists (QVL) Side(s): SS - Single-sided DS - Double-sided Visit the ASUS website for the latest DDR2-667/533 MHz QVL.
1-14 Chapter 1: Product introduction 1.7.3 Installing a DIMM Unplug the power supply before adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the motherboard and the components. To install a DIMM: 1.
ASUS M2V-TVM 1-15 1.8 Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support.
1-16 Chapter 1: Product introduction Standard interrupt assignments IRQ Priority Standard Function * These IRQs are usually available for ISA or PCI devices.
ASUS M2V-TVM 1-17 1.8.3 PCI slots The PCI slots support cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specications.
1-18 Chapter 1: Product introduction 1.9 Jumpers 1. Clear RTC RAM (CLRTC) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data.
ASUS M2V-TVM 1-19 2. Keyboard power (3-pin KBPWR) This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press a key on the keyboard (the default is the Space Bar).
1-20 Chapter 1: Product introduction 1.10 Connectors 1.10.1 Rear panel connectors 1. PS/2 mouse port (green). This port is for a PS/2 mouse. 2. Parallel port. This 25-pin port connects a printer, scanner, or other devices. 3. LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN) through a network hub.
ASUS M2V-TVM 1-21 7. USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices. 8. USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices.
1-22 Chapter 1: Product introduction 2. IDE connectors (40-1 pin PRI_IDE, SEC_IDE) The onboard IDE connectors are for Ultra DMA 133/100/66 signal cable(s).
ASUS M2V-TVM 1-23 3. Serial ATA connectors (7-pin SATA1, SATA2) These connectors are for the Serial ATA signal cables for Serial ATA hard disk and optical disk drives that allows up to 150 MB/s data transfer rates, faster than the standard parallel ATA with 133 MB/s (Ultra DMA133).
1-24 Chapter 1: Product introduction 4. CPU, and Chassis Fan connectors (4-pin CPU_FAN, CHA_FAN) The fa n co nnecto rs sup port c ooling fans of 35 0mA ~74 0mA (8 .
ASUS M2V-TVM 1-25 5. Serial port connector (10-1 pin COM2) This connector is for serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. The serial port bracket (COM) is purchased separately.
1-26 Chapter 1: Product introduction Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! 7. USB connectors (10-1 pin USB56, USB78) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis.
ASUS M2V-TVM 1-27 8. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports the AC`97 audio standard.
1-28 Chapter 1: Product introduction 9. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V) These connectors are for an ATX power supply. The plugs from the power supply are designed to t these connectors in only one orientation. Find the proper orientation and push down rmly until the connectors completely t.
ASUS M2V-TVM 1-29 10. System panel connector (2x5 10 pin F_PANEL) This connector supports several chassis-mounted functions. • System power LED This 3-pin connector is for the system power LED.
1-30 Chapter 1: Product introduction.
ASUS M2V-TVM 2-1 2 This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.
2-2 Chapter 2: BIOS Setup 2.1 Managing and updating your BIOS The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup. 1. ASUS AFUDOS - Updates the BIOS using a bootable oppy disk in DOS mode. 2.
ASUS M2V-TVM 2-3 A:>afudos /iM2VTVM.ROM AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Readingle.....done Erasingash....done Writingash....0x0008CC00(9%) The BIOS information on the screen is for reference only.
2-4 Chapter 2: BIOS Setup When the BIOS update process is complete, the utility returns to the DOS prompt. A:>afudos /iM2VTVM.ROM AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Readingle.
ASUS M2V-TVM 2-5 User recovery requested. Starting BIOS recovery... Checking for floppy... • If there is no oppy disk in the drive, the error message “Floppy not found!” appears. • If the correct BIOS le is not in the oppy disk, the error message “Floppy not found!” is displayed.
2-6 Chapter 2: BIOS Setup 4. Insert the oppy disk that contains the BIOS le. If all the neces sary les are found in the oppy disk, EZ Flash performs the BIOS update process and automatically reboots the system when done. User recovery requested.
ASUS M2V-TVM 2-7 2.1.5 ASUS Update The ASUS Update is a utility that allows you to update the motherboard BIOS in Windows ® environment. This utility is available in the support CD that comes with the motherboard package. ASUS Update requires an Internet connection either through a network or an Internet Service Provider (ISP).
2-8 Chapter 2: BIOS Setup 4. From the FTP site, select the BIOS version that you wish to download. Click Next. 5. Follow the instructions on the succeeding screens to complete the update process. 6. If you select the option to update the BIOS from a le, a window prompts you to locate the le.
ASUS M2V-TVM 2-9 2.2 BIOS setup program This motherboard supports a programmable Low-Pin Count (LPC) chip that you can update using the provided utility described in section “2.1 Managing and updating your BIOS.” Use the BIOS Setup program when you are installing a motherboard, reconguring your system, or prompted to“Run Setup.
2-10 Chapter 2: BIOS Setup SystemTime [11:51:19] SystemDate [Thu08/05/2003] LegacyDisketteA [1.44M,3.5in] PrimaryIDEMaster.
ASUS M2V-TVM 2-11 2.2.4 Menu items The highlighted item on the menu bar displays the specic items for that menu. For example, selecting Main shows the Main menu items. The other items (Advanced, Power, Boot, and Exit) on the menu bar have their respective menu items.
2-12 Chapter 2: BIOS Setup 2.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. 2.3.1 System Time [xx:xx:xxxx] Allows you to set the system time. 2.3.2 System Date [Day xx/xx/xxxx] Allows you to set the system date.
ASUS M2V-TVM 2-13 2.3.4 Primary and Secondary IDE Master/Slave While entering Setup, BIOS auto-detects the presence of IDE devices. There is a separate sub-menu for each IDE device. Select a device item then press <Enter> to display the IDE device information.
2-14 Chapter 2: BIOS Setup 2.3.5 System Information This menu gives you an overview of the general system specications. The items in this menu are auto-detected by BIOS. AMI BIOS Displays the auto-detected BIOS information. Processor Displays the auto-detected processor information.
ASUS M2V-TVM 2-15 2.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. T ake caution when changing the settings of the Advanced menu items. Incorrecteldvaluescancausethesystemtomalfunction.
2-16 Chapter 2: BIOS Setup Legacy USB Support [Enabled] Allows you to enable or disable support for USB devices on legacy operating systems (OS). Setting to Auto allows the system to detect the presence of USB devices at startup. If detected, the USB controller legacy mode is enabled.
ASUS M2V-TVM 2-17 Cool N’Quiet [Enabled] Enables or disables the AMD Cool ‘n’ Quiet! technology feature. Congurationoptions:[Disabled][Enabled] NorthBridge Configuration Memory Controller MemoryConguration ECCConguration PowerDownControl [Auto] AlternateVID [0.
2-18 Chapter 2: BIOS Setup MCT Timing Mode [Auto] Appears only when the Parallel Port Mode is set to [ECP]. This item allows you to set the Parallel Port ECP DMA.
ASUS M2V-TVM 2-19 DRAM SCRUB REDIRECT [Disabled] Sets the system to correct DRAM ECC Errors immediately when they occur, even if background scrubbing is on. Conguration options: [Disabled] [Enabled] DRAM BG Scrub [Disabled] Disables or sets the DRAM scrubbing functionality that corrects and rewrites memory errors so later reads are correct.
2-20 Chapter 2: BIOS Setup AGP Bridge K8M890 AGP/PCI EXPRESS Configuration OnChipVGAFrameBufferSize [64MB] PrimaryGraphicsAdapter [PCIEVGA] VLinkModeSupported.
ASUS M2V-TVM 2-21 HyperTransportAGPConguration (K8/NPT)to(AGP)FreqAuto [Enabled] Hyper Transport AGP Configuration Hyper Transport AGP Configuration [Enabled] Allows you to enable or disable the K8/NPT to AGP frequency selection by CPU capability.
2-22 Chapter 2: BIOS Setup Parallel Port Address [378] Allows you to select the Parallel Port base addresses. Conguration options: [Disabled] [378] [278] [3BC] Parallel Port Mode [Normal] Allows you to select the Parallel Port mode.
ASUS M2V-TVM 2-23 2.4.5 PCI PnP The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices. The menu includes setting IRQ and DMA channel resources for either PCI/PnP or legacy ISA devices, and setting the memory size block for legacy ISA devices.
2-24 Chapter 2: BIOS Setup Palette Snooping [Disabled] When set to [Enabled], the pallete snooping feature informs the PCI devices that an ISA graphics device is installed in the system so that the latter can function correctly. Setting to [Disabled] deactivates this feature.
ASUS M2V-TVM 2-25 2.5 Power menu The Power menu items allow you to change the settings for the Advanced Power Management (APM) feature. Select an item then press <Enter> to display the conguration options.
2-26 Chapter 2: BIOS Setup 2.5.3 APM Configuration APMConguration PowerButtonMode [On/Off] RestoreonACPowerLoss [PowerOff] PowerOnRing [Disable.
ASUS M2V-TVM 2-27 Power On By KBC [Disabled] Allows you to enable or disable the keyboard wake-up feature. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead.
2-28 Chapter 2: BIOS Setup CPU Temperature [xxx ºC/xxx ºF] MB Temperature [xxx ºC/xxx ºF] The onboard hardware monitor automatically detects and displays the CPU, motherboard and power temperatures. Select Disabled if you do not wish to display the detected temperatures.
ASUS M2V-TVM 2-29 2.6 Boot menu The Boot menu items allow you to change the system boot options. Select an item then press <Enter> to display the sub-menu. 2.6.1 Boot Device Priority 1st ~ xxth Boot Device [1st Floppy Drive] These items specify the boot device priority sequence from the available devices.
2-30 Chapter 2: BIOS Setup 2.6.2 Boot Settings Configuration Quick Boot [Enabled] Enabling this item allows the BIOS to skip some Power On Self Tests (POST) while booting to decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the POST items.
ASUS M2V-TVM 2-31 2.6.3 Security The Security menu items allow you to change the system security settings. Select an item then press <Enter> to display the conguration options.
2-32 Chapter 2: BIOS Setup To clear the supervisor password, select the Change Supervisor Password then press <Enter>. The message “Password Uninstalled” appears. After you have set a supervisor password, the other items appear to allow you to change other security settings.
ASUS M2V-TVM 2-33 Change User Password Select this item to set or change the user password. The User Password item on top of the screen shows the default Not Installed. After you have set a password, this item shows Installed. To set a User Password: 1.
2-34 Chapter 2: BIOS Setup To set a User Password: 1. Select the Change User Password item and press <Enter>. 2. On the password box that appears, type a password composed of at least six letters and/or numbers, then press <Enter>. 3. Conrm the password when prompted.
ASUS M2V-TVM 2-35 If you attempt to exit the Setup program without saving your changes, the program prompts you with a message asking if you want to save your changes before exiting.
2-36 Chapter 2: BIOS Setup Discard Changes Allows you to discard the selections you made and restore the previously saved values. After selecting this option, a conrmation appears. Select Yes to discard any changes and load the previously saved values.
3 Software support This chapter describes the contents of the support CD that comes with the motherboard package..
3-2 Chapter 3: Software support If Autorun is NOT enabled in your computer, browse the contents of the support CD to locate the le ASSETUP.EXE from the BIN folder. Double- click the ASSETUP.EXE to run the CD. Click an item to install 3.1 Installing an operating system This motherboard supports Windows ® 2000/XP operating systems (OS).
3-3 ASUS M2V-TVM 3.2.2 Drivers menu The drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. AMD Cool ‘n’ Quiet Driver Installs the AMD Cool ‘n’ Quiet driver.
3-4 Chapter 3: Software support 3.2.3 Utilities menu The Utilities menu shows the applications and other software that the motherboard supports. ASUS Cool ‘n’ Quiet Utility Installs the ASUS Cool ‘n’ Quiet utility. ASUS Update The ASUS Update utility allows you to update the motherboard BIOS in a Windows ® environment.
3-5 ASUS M2V-TVM Anti-Virus utility The anti-virus utility scans, identies, and removes computer viruses. View the online help for detailed information. ASUS Screen Saver Installs the ASUS screen saver. The screen display and utilities option may not be the same for different operating system versions.
3-6 Chapter 3: Software support 3.2.5 ASUS Contact information Click the Contact tab to display the ASUS contact information. You can also nd this information on the inside front cover of this user guide.
デバイスAsus M2V-TVMの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Asus M2V-TVMをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAsus M2V-TVMの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Asus M2V-TVMの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Asus M2V-TVMで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Asus M2V-TVMを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAsus M2V-TVMの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Asus M2V-TVMに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAsus M2V-TVMデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
