ビデオカメラ Panasonic AG-HPX250Pの取扱説明書

1ページ

Shooting Playback Editing Displays Menu Reference M0811HO0 -FJ ENGLISH VQT3T24A (E) Operating Instructions Vol.2 Memory Card Camera-Recorder Model No. AG-HPX250P AG-HPX250EN Note that Operation Instructions Vol. 2 describes advanced operations of the Memory Card Camera-Recorder.

2ページ

2 • SDHCLogoisatrademarkofSD-3C,LLC. • HDMI,theHDMIlogo,andHigh-DenitionMultimediaInterfacearetrademarksorregisteredtrademarks ofHDMILicensingLLC.

3ページ

3 Contents V olume1 Read this first! (For AG-HPX250P) Read this first! (For AG-HPX250EN) Read this first! (For AG-HPX250P/ AG-HPX250EN) Outline of operations Before use Operating precautions Precau.

4ページ

4 Contents (continued) Shooting Viewnder ............................................................ 6 Usingtheviewnder ..........................................  6 UsingtheLCDmonitor ...................................

5ページ

5 Nonlinear editing with P2 card (PC mode: USB device) .......................................................... 109 Proceduresformakingconnectionstoa personalcomputer .....................................  109 Using a hard disk drive (PC mode: USB host) .

6ページ

6 V iewnder • ThepixelsoftheLCDmonitorarecontrolled toobtainhighprecisionwith99.99%ofthe effectivepixels. Thisleaveslessthan0.01% ofpixelsthatmaynotlightormayremainon allthetime.

7ページ

7 Shooting Using the LCD monitor 1 Set the POWER/MODE switch to ON. (Page25ofV ol.1) 2 Open the LCD monitor . • Itcanopenoutto90degrees.Donottry toopenitfurtherasthiswilldamagethe camera-recorder .

8ページ

8 Adjusting the screen display 1 Set the POWER/MODE switch to ON. (Page25ofV ol.1) 2 Press the MENU button. • Fordetails onmenuoperation ,referto“Using thesetupmenus”(Page28ofV ol.1). • Y oucanalsousethecorrespondingbuttons ontheremotecontrol.

9ページ

9 Shooting T ally lamp T ally lamp (Front) T ally lamp (Rear) Thetallylampcanbeilluminatedduringrecording bysettingtheT ALL YLAMP itemontheOTHER FUNC TIONS screen (Pag e151) toan yset tingo ther thanOFF .

10ページ

10 Basic shooting operations Preparing to shoot 1 Set the POWER/MODE switch to ON. (Page25ofV ol.1) 2 Push the OPEN lever of the P2 card slot cover downward (  ) and slide to open (  ). 3 Insert the P2 card securely in the card slot.

11ページ

11 Shooting Underthefollowingcircumstances,evenif youpresstheST AR T/STOPbuttonitmay takesometimeuntilthewritingtotheP2card nishes.Forthisreason,theoperationwillnot beacknowledgedifyoupresstheST AR T/STOP buttontoosoon.

12ページ

12 P2 card access lamps ■ CAMERA/PB/PC (USB HOST) mode Lights green: Datacanbesavedontothecardsorloadedfrom them. Blinks green (slow): Noavailablespaceoncard,cardis writeprotected. Lights orange: Slotthatistheobjectofrecording.

13ページ

13 Shooting Formatting P2 cards 1 Set the POWER/MODE switch to ON. (Page25ofV ol.1) 2 T urn the POWER/MODE switch to set to PB/ THUMBNAIL mode (PB/THUMBNAIL lamp illuminates). • Thumbnailsaredisplayed. Mode lamp (PB/THUMBNAIL) POWER/MODE switch 3 Press the MENU button.

14ページ

14 Splitting clips recorded on P2 cards Thiscamera-recorderwillautomaticallygenerate additionalclipsforacontinuousrecordingon an8GBorhighercapacityP2cardwhenthe recordingexceedsthedurationsgivenbelow .

15ページ

15 Shooting Remove the P2 card 1 Push the OPEN lever of the P2 card slot cover downward (  ) and slide to open (  ). 2 Check that the P2 card access lamp is not blinking orange. 3 Push the P2 card eject button and press it. 4 Remove the P2 card.

16ページ

16 Y oucanuseSDandSDHCmemorycards(the term“SDmemorycard”isusedforbothhereafter) tosaveandloadSCENElesandUSERles,and touploadclipmetadata.

17ページ

17 Shooting Cautions in using SD memory cards SDmemorycardsusedwiththe AG-HPX250P/EN shouldconformtoSDorSDHCstandards. Besuretoformatcardsusingthe AG-HPX250P/ EN. SDmemorycardswiththefollowingcapacitycan beusedforthe AG-HPX250P/EN.

18ページ

18 Using the zoom function Thiscamera-recorderhasa22xopticalzoom function. Zoomwiththezoomleverorthezoomring.

19ページ

19 Shooting Digital zoom function AssigntheD.ZOOMfunctiontoUSERMAINor anyoftheUSER1–4buttonstoenableuseofthe digitalzoom.(Page39) EachpressoftheUSERbuttontowhichD.

20ページ

20 Shooting in progressive mode • In 24P/24P A, 24PN (native recording) and in 30PN/25PN (native recording) at 720P , the camera starts recording in 5-frame, 4-frame and 2-frame segments, respectively .

21ページ

21 Shooting Recording with V ariable Frame Rate (VFR) In1080iand720Pmode,thisunitcanshoot usingframeskipping(undercranking)andhigh speedrecording(overcranking).Y oucanselect native(PN)recordingmodeandstandard(OVER) recording.

22ページ

22 Standard VFR recording (pulldown recording) 1 In 1080i or 720P mode, set REC FORM A T on the setting menu SYSTEM SETUP screen to A VC-I 100/60i (60P) (or 50i, 50P). 2 In the SCENE FILE screen, set the menu option VFR to ON and the menu option FRAME RA TE to suit shooting purposes.

23ページ

23 Shooting Using progressive mode and VFR recording function Standard speed for lm production Screenproductionnormallyrequiresa24fps(24framespersecond)framerate(normalspeed)for screeningalm.

24ページ

24 Recording with V ariable Frame Rate (VFR) (continued) Shooting at standard speed for producing commercials and TV programs Whenproducingvideosfordisplayonatelevisionscreen�.

25ページ

25 Shooting Undercranking effects Thiseffectproducesthequickmotionoftenusedforshowingcloudsdriftingacrossthesky ,crowdsof peopleswarmingpastasolitarystandingindividual,akungfudemonstrationandotherperformances.

26ページ

26 Recording with V ariable Frame Rate (VFR) (continued) Overcranking effects Overcrankingproducesslow-motionplayback,whichisfrequentlyusedinclimaxscenes,orfordramatic effectslikecarchasesandactionscenes.

27ページ

27 Shooting Flow effect shooting Thiswayofshootingprovidesaoweffectand may ,forinstance,beusedtoshootasubjecton afarsideofaro.

28ページ

28 Shooting in manual mode T emporarily switching to auto focus EvenifyouhaveswitchedFOCUStoM(MANUAL) thecamera-recorderwillfocusautomaticallywhile youpressdownPUSH AUTO.

29ページ

29 Shooting Using focus assist function PressingtheFOCUS ASSISTbuttonmagniesthe imageatthecentertofacilitatefocusing. SetthemenuoptionFOCUSBARtoONinthe DISPLA Y SETUPscreentodisplaythefocusbar .

30ページ

30 Shooting in manual mode (continued) Iris adjustments IRIS ring IRIS button 1 If the camera-recorder is in auto mode, use the AUTO/MANUAL switch to switch to manual mode. (Page 28) 2 Press the IRIS button to switch how to adjust the aperture of lens.

31ページ

31 Shooting Using super gain Y oucanincreasethegainlevelfurtherwhen shootingindarkspace. SetSUPERGAINonthesettingmenuSWMODE screento24dB,30dBorBOTH.

32ページ

32 1 Set the GAIN and WHITE BAL switches. • FortheWHITEBAL switch,select A orBas apositiontosavetheadjustmentvalue. 2 Adjust the ND FIL TER dial according to the light conditions. ForexamplesofNDFIL TERdial,see“Light intensityadjustments”(Page31).

33ページ

33 Shooting 7 The adjustment will take effect in a few seconds, and the following message will appear: • Theadjustedvalueisautomaticallystoredin theselectedmemory(A orB).

34ページ

34 Adjusting the black balance Theblackbalancemustbeadjustedwhen: • Y ouuseyour AG-HPX250P/ENthersttime. • Y our AG-HPX250P/ENhasnotbeenusedfor sometime. • Theambienttemperaturehaschanged substantially .

35ページ

35 Shooting Shooting techniques for different targets Scan reverse shooting BysettingSCANREVERSEonthesettingmenu SYSTEMSETUPscreentoON,videocanbe vertically/horizontallyinvertedwhendisplayingand recording.

36ページ

36 Center marker display A centermarkerisdisplayedwhenthemenuoption MARKERintheDISPLA Y SETUPscreenissetto ON.(Page147) The center marker display appears only on the LCD monitor and in the viewnder .

37ページ

37 Shooting Changing the image size Whenrecordingin480i/576imode,youcan changethesize(aspectratio)oftheimagesthat yourecord. Selecttheaspectratiointhesetupmenus, SY S TE M S ET UP  sc r ee n,  AS PE CT CO N V .

38ページ

38 Shooting techniques for different targets (continued) FBC (Flash Band Compensation) Thiscamera-recordercomeswithafunctionto compensateforandminimizelightband(.

39ページ

39 Shooting Using the USER buttons Y oucanallocatetheselectedfunctiontoUSER MAINandUSERbuttons1to4. USER MAIN buton USER1 – 3 buton USER4 buton Selectable Functions SPOTLIGHT : Assignsautoiriscontrolon/offforspotlight.

40ページ

40 Shooting techniques for different targets (continued) Backlight compensation PresstheUSERbuttonyouhaveallocatedtothe BACKLIGHTfeaturewhenshootingsubjectslit fromtheback. BACKappearsonthescreen.

41ページ

41 Shooting 2-slot continuous recording IfyouinserttwoP2cardsintothetwocardslots, thisfunctionallowsyoutorecordcontinuouslyon thetwocards.

42ページ

42 T ext memo recording Thisfunctionaddstextmemosatthevideopoints ontheclipnowbeingrecordedorplayedback. WhenyoupresstheUSERbuttontowhichthe TEXTMEMOfunctionhasbeenallocated,thetext memowillberecordedatthatpoint.

43ページ

43 Shooting Using special recording modes DuringP2cardrecording,thefollowingspecialrecordingmodescanbeenabledfromtheRECORDING SETUPscreen:pre-recording,intervalrecording,one-shotrecording,looprecording,andone-clip recording.

44ページ

44 Pre-recording (PRE REC) Thisfunctionisusedtostartrecordingacertain numberofseconds(approx.3secondsforHD recordingsorapprox.7secondsforSDrecordings) beforeactualrecordingstarts.

45ページ

45 Shooting • The pre-recording and one-clip recording functions are not available. • Sound is not recorded. • Data recorded (until the stop recording) in this mode is recorded as a single le. • There is no output from the DVCPRO/DV connector .

46ページ

46 Loop recording (LOOP REC) • WhentwoP2cardsareinsertedintheP2card slots,eachcardisrecordedinsuccession.

47ページ

47 Shooting One-clip recording (ONE CLIP REC) Insteadofcreatinganewclipforeachrecording session(i.e.,operationfromRECstarttostop), thismodecompilesimagesfrommultiplerecording sessionsintoasingleclip.

48ページ

48 Precautions for one-clip recording mode • Thismodewillnotfunctionwhentheinterval recording,one-shotrecording,looprecording,or VFRrecordingfunctionsareselected. • Thismodewillnotfunctionwhenthemenuoption RECSIGNAL issetto1394.

49ページ

49 Shooting Adjusting the shutter speed Setting SHUTTER mode 1 Push DIAL SEL to select SHUTTER mode. 2 Push the SHTR/F .RA TE dial. • TheSHUTTERmodechangesON/OFF . • Theshutterspeedchangesbyturningthe SHTR/F .

50ページ

50 Ifallmodesandspeedsareavailable,thedisplay changesinthefollowingorder: ■ When SYSTEM MODE is set to 1080-59.94i, 720-59.94P, 480-59.94i For 60i and 60P recording (1/15) (1/30) 1/60 1/100 1/250 S/S 1/120 1/500 1/1000 1/2000 For 30P recording (1/7.

51ページ

51 Shooting Setting FRAME RA TE mode 1 Press DIAL SEL button to select FRAME RA TE function. WhenVFRisON,theframerateindicatoron theviewnde randLCDmonitoras hasshown inthediagrambelow ,indicatingthatyoucan altertheframerate.

52ページ

52 Switching audio input INPUT1 switch (MIC POWER +48V) INPUT1 LINE/MIC switch INPUT2 LINE/MIC switch INPUT2 switch (MIC POWER +48V) AUDIO CH2 SELECT switch AUDIO CH1 SELECT switch AUDIO INPUT 1/2 terminal Using the built-in microphone 1 Switch the AUDIO CH1 SELECT switch to INT (L).

53ページ

53 Shooting Using another microphone and audio equipment 1 Connect an external microphone or audio equipment to the AUDIO INPUT 1/2 (XLR, 3 pin) terminal. (Page 101) 2 Use the INPUT 1/2 switch to switch the audio input. LINE: (audioequipmentisconnected) Inputlevelis0dBu.

54ページ

54 Adjusting the recording level AUDIO LEVEL knob (CH1, CH2) AUDIO AUTO/MANU CH1, CH2 switch Usethe AUDI OLEVEL knobtoadjustthe recording levelofthebuilt-inmicrophoneorofaudiosignals inputthroughthe AUDIOINPUT1/2(XLR,3pin) terminal.

55ページ

55 Shooting (Only for AG-HPX250EN) T C 1 2 : 3 4 : 5 6 : 2 3 1 1 2 9 9 9 min P 2 F  U L L P - P A U S E 1 - C L I P U S E R - 1 1394 60 1080 i A VC-I 100 P 3 .2 K L T . B INT R INT L. : : C C H H 2 1 O X 0 dB / 1 6 N D 1 F B C -30 -18 -12 0 dB -6 2 1 3 4 5 1 Channel display Thisdisplaysthecurrentlymonitoredaudio channel.

56ページ

56 Using scene les (Scene File Data) Changing scene le settings ■ Example 1: Change the name of the scene le. 1 T urn the scene le dial, then select the scene le to be changed. 2 Select the menu option NAME EDIT in the SCENE FILE screen, then press the Operation lever in the ▲ ▼ direction.

57ページ

57 Shooting • PressingtheMENUbuttonxesthecurrent settingsandclosesNAMEEDIT . • V aluesthathavebeenxedaremaintained evenifthepowerisswitchedOFForthe dialischanged.

58ページ

58 Using scene les (Scene File Data) (continued) Saving scene les and other settings on SD memory cards Y oucansaveuptofourscenelesettingsorother settingsaslesonanSDmemorycard,andyou canalsoloadthemfromthecard.

59ページ

59 Shooting T o title a le 1 Performsteps1to5. 2 Setthelenamewith8charactersbyusing Operationlever .

60ページ

60 Conguration of setup data les ThiscameramakesitpossibletosaveasceneletoeachoftheF1toF6positionsontheSCENEFILE dial.

61ページ

61 Shooting Using time data Time data overview ■ Time code UsetheTCGswitchtoselectRecRunorFreeRun mode.(Page141) FREE RUN: Thetimecodeadvancesconstantlywhetherthe camera-recorderisonornotjustliketimeitself.

62ページ

62 Using time data (continued) ■ Date (real time) • Thebuilt-inclockcalculatestheyear ,month,day andtimefromtheinternalclocktodisplayon videointheLCD,viewnderandVIDEOOUT andothervideooutput.

63ページ

63 Shooting Entering the user bits Theuserbitsallowinformation,includingmemos thatuseuptoeight-digithexadecimalnumbers (dateandtime),toberecordedintheSubcode area.

64ページ

64 Using time data (continued) Frame rate information recorded in user bits Theframeratevalueofvideodatacapturedand recordedataframeratesetinthemenu�.

65ページ

65 Shooting 720P mode Frame rate: 24P over 60P (2:3)  Updatedframe 02 25 00 01 03 04 05 06 23 24 26 27 28 29 A A B B B C C C D D D D A A B B B C C D D D D D A A B B 01 10 10 10 01 00 10 10 01 00.

66ページ

66 Using time data (continued) Setting the time code 1 Switch the menu option TC MODE and TCG on the RECORDING SETUP screen to set the mode of the time code.

67ページ

67 Shooting Externally locking the time code Thetimecodegeneratorbuiltintoyour AG- HPX250P/ENmaybelockedtoanexternal generator .Itisalsopossibletolockanexternal timecodegeneratortotheinternalgenerator .

68ページ

68 Using time data (continued) T o externally lock the time code Followthestepsbelow . 1 T urn the POWER/MODE switch to ON. 2 Set TCG on the setting menu RECORDING SETUP screen to FREE RUN.

69ページ

69 Shooting GENLOCK and time code input/output connection and setup Camera-recorder operating conditions Camera- recorder setup GENLOCK input and camera-recorder output phase (In phase: √ Out of pha.

70ページ

70 Using time data (continued) Outputting the time code externally T ooutputtimecodefromthecamera-recorder ’sTC OUTconnectortoaVTRorotherrecordingdevi.

71ページ

71 Shooting Recording time codes and user bits When SYSTEM MODE is set to 1080-59.94i, 720-59.94P , 480-59.94i System setting status Recorded TC Output TC Displayed TC Recorded UB Output UB SYSTEM MOD.

72ページ

72 Using time data (continued) System setting status Recorded TC Output TC Displayed TC Recorded UB Output UB SYSTEM MODE REC SIGNAL REC FORMA T CAMERA MODE FRAME RA TE L TC VITC TC OUT L TC and VITC .

73ページ

73 Shooting When SYSTEM MODE is set to 1080-50i, 720-50P , 573-50i System setting status Recorded TC Output TC Displayed TC Recorded UB Output UB SYSTEM MODE REC SIGNAL REC FORMA T CAMERA MODE FRAME R.

74ページ

74 Basic playback operations Lock release button Mode lamp (PB/THUMBNAIL) POWER/MODE switch 1 T urn the POWER/MODE switch to ON. Whileholdingdownthelockreleasebutton, turnthePOWER/MODEswitchtotheON position. 2 T urn the POWER/MODE to illuminate the PB/THUMBNAIL operation lamp.

75ページ

75 Playback Thumbnail operations A clipisadatagroupthatincludestheimagesand voicescreatedfromoneshootingsession,together withadditionalinformationsuchastextmemosand metadata.

76ページ

76 Thumbnail manipulations overview Thumbnailscreensareconguredasfollows: THUMBNAIL OPERA TION PROPERTY ALL CLIP DELETE CLIP PROPERTY SAME FORMA T CLIPS FORMA T SELECTED CLIPS REP AIR CLIP MARKED CLIPS RE-CONNECTION TEXT MEMO CLIPS COPY EXCH.

77ページ

77 Playback Thumbnail screen ThethumbnailscreenisdisplayedontheLCD monitorwhenyouturnthePOWER/MODEswitch downwardandswitchtoPB/THUMBNAIL mode. T urnthePOWER/MODEswitchagaintoreturnto CAMERA mode.

78ページ

78 2. Slot numbers and HDD status ThissectionindicatesonwhichP2cardthe pointedclipisrecorded.Thenumberofthe slotthatcontainstheappropriateP2cardis indicatedinyellow .

79ページ

79 Playback Playing back clips 1 T urn the POWER/MODE switch to set to PB/ THUMBNAIL mode. ThethumbnailscreenappearsontheLCD monitor . 2 Push the Operation lever in the ◄ ► direction and position the pointer on the clip you wish to play back.

80ページ

80 Switching the thumbnail display Thedisplaycanbeswitchedsothatonlythose clipsmatchingthespeciedconditionsare displayedinthethumbnailscreen. 1 T urn the POWER/MODE switch to set to PB/ THUMBNAIL mode.

81ページ

81 Playback Display clip properties by selecting PROPERTY → CLIP PROPERTY on the thumbnail menu to conrm the position of the thumbnail (the number of frames from the top of the clip). Since thumbnails come generally from the top of the clip, [0] is displayed.

82ページ

82 Shot mark A shotmarkcanbeaddedtoaclipthumbnailto distinguishthisclipfromtheothers. 1 T urn the POWER/MODE switch to set to PB/ THUMBNAIL mode. ThethumbnailscreenappearsontheLCD monitor .

83ページ

83 Playback 4 With the pointer at the bottom, push the Operation lever in the ◄ ► direction and position it on the text memo number you wish to play back then push the Operation lever in the ▲ direction (► playback).

84ページ

84 Using a text memo to break a clip and copy the necessary portion 1 Select a desired text memo in a clip by carrying out steps 1-3 for “Playing back a clip at the position where a text memo is recorded” (Page 83). 2 Move the pointer to the desired text memo, and then press the SET button on the Operation lever .

85ページ

85 Playback Reconnection of incomplete clips Incompleteclipsmaybegeneratedwhenclips recordedon multipleP2car ds(connectedcl ips)are separatelycopiedtodifferentcards.Reconnection functiongeneratesoneclip(theoriginal,connected clip)fromincompleteclips.

86ページ

86 Copying clips SelectedclipscanbecopiedtotheP2cardorSD memorycardinthedesiredslot. 1 T urn the POWER/MODE switch to set to PB/ THUMBNAIL mode. ThethumbnailscreenappearsontheLCD monitor .

87ページ

87 Playback Setting of clip meta data Informationsuchasthenameofpersonwhoshot thevideo,thenameofthereporter ,theshooting location,oratextmemocanbereadfromtheSD memorycard,andcanberecordedasClipMeta Data.

88ページ

88 Clip meta data items ClipMetaDataincludesthefollowingitems: Underlineditemscanbesetbyreadingthe metadatauploadleontheSDmemorycard. Otheritemsaresetautomaticallyduringshooting.

89ページ

89 Playback *1:  TheUSERCLIPNAMErecordingmethodis selectable.Fordetails,referto“Selectingthe USERCLIPNAMErecordingmethod”(Page 90). *2:  AL TITUDE/LA TITUDE/LONGITUDEinSHOOT arenotautomaticallysetduringshootingwith thisunit.

90ページ

90 *  TheCOUNTvalueisindicatedasafour-digit number . TheCOUNTvalueisincrementedeachtimea newclipiscapturedifclipmetadatahasbeen readinandTYPE2hasbeenselectedasthe recordingmethod.

91ページ

91 Playback Example of recording (DVCPRO HD) a clip on one P2 card: Recording pause REC start Recordingduration= Approx.7min. Clip1 COUNTvalue =0001 Clip2 COUNTvalue =0002 5min.

92ページ

92 Formatting SD memory cards SDmemorycardscanalsobeformattedfrom thethumbnailscreen.WithanSDmemorycard insertedintothecamera-recorder ,performthe followingoperation: 1 T urn the POWER/MODE switch to set to PB/ THUMBNAIL mode.

93ページ

93 Playback DA T A DISPLA Y : Thetimedisplayeldoftheclipoffersachoice ofT imeCode(TC),UserBits(UB),Shooting T ime(TIME),ShootingDate(DA TE),Shooting T imeandDate(DA TETIME),clipname(CLIP  NAME)oruserclipname(USERCLIPNAME).

94ページ

94 4. Clip Information Displaysdetailedinformationabouttheclip. CLIP NAME: Displayclipnames. ST ART TC: Thetimecodevalueatthestartofthe recording. ST ART UB: Theuserbitvalueatthestartof therecording.

95ページ

95 Playback • Deleting only the respective items of LOCA TION (recording location data) in SHOOT is not possible. By setting AL TITUDE to empty , other LONGITUDE/ LA TITUDE items are collectively deleted. • The metadata for a clip with the incomplete clip indicator cannot be modied.

96ページ

96 Contents of P2 card status display settings Fromthethumbnailmenu,selectPROPERTY → CARDST A TUS.Thefollowingscreenappears. When “REMAIN” is selected: 3 5 4 1 2 1. Write-protect Mark The mark appears if the P2 card is write- protected.

97ページ

97 Playback When “USED” is selected: 3 5 4 1 2 1. Write-protect Mark The markappearsiftheP2cardiswrite- protected. 2. P2 Card Status (used memory capacity) TheusedmemorycapacityoftheP2cardis indicatedbyabargraphandapercentage gure.

98ページ

98 SD memory card status display Thestatusdisplayenablesaconrmationofthe SDmemorycardformattedcondition,available memorycapacityetc. Fromthethumbnailmenu,selectPROPERTY → DEVICES→SDCARD.

99ページ

99 Playback Useful playback functions V ariable speed search Thisfunctionenablesyoutochangetheplayback speedandsearchforspecicscenes. 1 Press the Operation lever in the ► direction (playback) during playback.

100ページ

100 Clip skip 1 Press  (pause) during playback to set the unit to the pause mode. 2 Push the Operation lever in the  (rewind) or  (fast-forward) direction. STILL A DV PAUS E STILL A DV INDEX SELECT VAR . VO L + - P B . S TO P INDEX MULTI / P-IN-P REC A.

101ページ

101 Editing Connecting external units Headphones 3.5-mm stereo mini jack • Soundisnolongerheardfromthespeakerwhentheheadphonesareconnected.

102ページ

102 Connecting external units (continued) Personal computer (non-linear editing/le transfer) File transfer/nonlinear editing Personal Computer USB cable (optional) Mini-B • “Proceduresformakingconnectionstoapersonalcomputer”(Page109) • USB2.

103ページ

103 Editing Digital video equipment (Dubbing) 1394 cable (optional) Other Digital video equipment 6-pin BNC cable (optional) Connect one of these cables to the terminal on the recorder .

104ページ

104 TV/Monitor (playback/dubbing) BNC cable (optional) HDMI cable (optional) Video pin cable (optional) Audio pin cable (optional) White: CH1 (left channel) sound Red: CH2 (right channel) sound Connect one of these cables to the terminal on the television or monitor .

105ページ

105 Editing Connections to the DVCPRO/DV connector Recording signals input to the DVCPRO/DV connector 1 Connect a 1394 cable (DV cable). • “Prec autions in1394 connect ions”( Page107 ) • Makesurethatthesignalformatofthe camera-recorderandtheconnecteddeviceis thesame.

106ページ

106 Connections to the DVCPRO/DV connector (continued) Subcode area time codes and user bits • WheninputfromtheIEEE1394interfaceis selectedandthetimecodeissettofreerun,the subcodeareatimecodeinputfromtheDVCPRO/ DVterminalcanberecordedonP2card.

107ページ

107 Editing • External devices cannot be controlled via 1394 connection when A VC-Intra format or DVCPRO HD native recording is selected. • Backup recording does not work in three of the special recording modes: Interval recording, One-shot recording and Loop recording.

108ページ

108 • Observethefollowingprecautionswhen controllingaP2memorycardcamera-recorder usingPCapplicationsoftware(editingsoftware).  · Recordingcannotbeinsertedtoaportionwithin aclip.

109ページ

109 Editing Nonlinear editing with P2 card (PC mode: USB device) A USB2.0connectiontoacomputerorother deviceallowsyoutouseP2cardsinthecamera- recorderasmassstorage. Procedures for making connections to a personal computer 1 Connect a USB cable to the USB 2.

110ページ

110 • WhenaUSBconnectionispresentthePC operationlampilluminates,and“USBDEVICE CONNECT”appearsinthecenterofthe viewnderorLCDmonitor .Whenconnectionis notcorrectly ,“DISCONNECT”appearsinthe viewnder .

111ページ

111 Editing Using a hard disk drive (PC mode: USB host) Inthismode,itispossibletoconnecttoaharddisk drive(HDD),storecarddata(EXPORT):Referto.

112ページ

112 Using a hard disk drive (PC mode: USB host) (continued) Using the USB HOST mode Usable hard disk drives • HarddiskdrivesconnectableviaUSB2.

113ページ

113 Editing 1. P ARTITION Thissectionindicatesthetypeoftheharddisk drive. Theavailablefunctionsdependonthetypeof harddiskdrive. HDD type Feature Available functions TYPES A specialformatthat allowshigh-speed writingandwritingback onacard-by-cardbasis.

114ページ

114 Using a hard disk drive (PC mode: USB host) (continued) 1 1. VERIFY Thissectionindicatesthevericationsetting andresultsatthetimethedataonthepartition wasrecorded. ON:FINISHED : V ericationwasperformedandtheresults agreed.

115ページ

115 Editing Writing data on a hard disk drive 1 Switch the mode to USB HOST . • “S wi tch in gt o the U SB HO ST m ode ” (Pa ge 1 1 1) • Thethumbnailscreenisdisplayed. (USBHOSTisdisplayedinthebottomright.

116ページ

116 Using a hard disk drive (PC mode: USB host) (continued) Writing data back to P2 cards Selecting clips on the hard disk drive Y oucanselectclipsontheharddiskdrivetobe writtenbacktoP2cards. 1 Switch the mode to USB HOST .

117ページ

117 Editing Direction for using a hard disk drive • A harddiskdrive(includingtheP2STORE(AJ- PCS060G))mustbeusedunderthefollowing conditions:  · Itmustmeettheoperatingrequirements(e.

118ページ

118 Using a hard disk drive (PC mode: USB host) (continued) MISSING CLIP! A shotmarkwillbeaddedtotheclipsrecorded onmultipleP2cardswhenallP2cardsarenot insertedyet.

119ページ

119 Editing LACK OF CAP ACITY! Notenoughspaceleftontheharddisk. Thereisnotenoughspaceontheconnected harddisk.Useanewharddiskorformatted harddisk. HDD DISCONNECTED! Theunitisnotconnectedtoaharddisk.

120ページ

120 Screen displays Viewnder screen status displays Inadditiontovideo,theviewnderorLCDmonitor showsmessagesindicatingcamera-recorder settingsandoperatingstatus,centermarkers, safetyzonemarkers,zebrapatternsandother indications.

121ページ

121 Displays Screen displays T C 1 2 : 3 4 : 5 6 : 2 3 1 1 2 9 9 9 min P 2 F U L L P - P A U S 1 - C L I P E U S E R - 1 1394 60 D 5 F B C 1080 i A VC-I 100 P 3 .2 K T . B O X 0 dB N D 1 8 3 % N D 1 S E P 2 5 2 0 1 1 2 S P O T F 5 . 6 3 : 5 9 : 4 5 m 9 m 1 Z 0 .

122ページ

122 2 W arnings REMOTE: Flasheswhendevicesettingsofwireless remotecontrolaredifferent. P2 : BlinkswhennoP2cardisinsertedorthe cardiswriteprotected. P2 FULL: Blinkswhenthereisnomorespacelefton theP2card.

123ページ

123 Displays 12 Audio level meter display (Only for AG-HPX250P) C H 1 -20dB 0dB C H 2 -12dB (Only for AG-HPX250EN) C H 1 -18dB 0dB C H 2 -12dB ByassigningMAG A.L VL (levelmeter magnication)toaUSERbuttonmakesit possibletoswitchtodisplaymagnication.

124ページ

124 26 Image stabilization display ThisisdisplayedwhentheOISbuttonis pressedandimagestabilizationisactivated. 27 Scene le name display Indicatesthenameofcurrentlyselected SCENEFILE(F1toF6).

125ページ

125 Displays 33 Recording and playback REC :  Recording P AUSE : Recordingstandby  : Playbackpause  : Play ( ) : Slowplay(Reverseslowplay) ( ) : Frame-by-frame(Reverse.

126ページ

126 Errors and warnings Errorsandwarningsappearwhensomething goeswrongwiththecamera-recorderoraP2card malfunctions.

127ページ

127 Displays TEMPORAR Y P AUSE IRREGULAR FRM SIG: Thismessageindicatesthattheinput GENLOCKreferencesignalisirregularand thatrecordinghasbeenpaused.

128ページ

128 Screen displays (continued) SHUTTER 1/**** (OFF) Displayedwhentheshutterspeedischanged. SPOT LIGHT Displayedduringiriscontrolwhenbacklight statusischangedbypressingtheUSERbutton towhichSPOTLIGHT isassigned.

129ページ

129 Displays No Displays Displays that MODE CHECK brings up √ Displays that DISPLA Y OFF clears √ Displays opened or hidden by settings in the OTHER DISPLA Y option – : Not affected, √ : Opens.

130ページ

130 No Displays Displays that MODE CHECK brings up √ Displays that DISPLA Y OFF clears √ Displays opened or hidden by settings in the OTHER DISPLA Y option – : Not affected, √ : Opens, ×: Cle.

131ページ

131 Displays MODE CHECK indication MODECHECKprovidesanalmostcompletesetofcamera-recorderinformation. Items1to3belowareprovidedonlybyMODECHECK.

132ページ

132 Item Setting Notes LOAD/SA VE/INIT Loads,savesandinitializessettingsofthescenele assignedtothecurrentscenedialposition(oneF1–F6 scenele). LOAD: Loadsdatastoredincamera-recordermemory .

133ページ

133 Menu Item Setting Notes DET AIL CORING Adjuststhelevelofnoisereductionofthedetailsignal. – 7 …0 *1 … +7 • Adjusttowards–foraclearerimage.Noiseincreases slightly . • Adjusttowards+forlessnoise.

134ページ

134 Item Setting Notes KNEE Setsthecompressionlevel(kneepoint)ofthehigh brightnessvid eosignalsreceivedth roughtheMOSsensor toavoidoverexposure. AUTO: *1 Setsthelevelautomaticallyaccordingtothereceived signals.

135ページ

135 Menu Item Setting Notes SYSTEM MODE Speciesthesignalformatusedbythiscamera-recorder . 1080-59.94i, 1080-50i, 720-59.94P , 720-50P , 480-59.

136ページ

136 SYSTEM SETUP screen (continued) Item Setting Notes REC FORMA T (continued) ■ WhenSYSTEMMODEis720-59.94P A VC-I100/60P , A VC-I100/30PN, A VC-I100/24PN: Usesthe A VC-I100codecforrecording.Shootingand recordingat60P ,30PN(nativerecording)and24PN (nativerecording).

137ページ

137 Menu SYSTEM SETUP screen (continued) Item Setting Notes ASPECT CONV Selectstheaspectratioforrecordingat480i,576i. SIDE CROP: Cropstherightandleftedgesoftheimage. LETTER BOX: Addsblackbandsatthetopandbottomoftheimage.

138ページ

138 SW MODE screen Item Setting Notes LOW GAIN SetsthegainvalueassignedtotheLpositionoftheGAIN switch. 0dB, 3dB, 6dB, 9dB, 12dB, 15dB, 18dB • Fixedto0dBwhentheframe rateissetto4FRAMEorlower inVFRmode.

139ページ

139 Menu SW MODE screen (continued) Item Setting Notes USER MAIN SetsthefunctionassignedtotheUSERMAINbutton. SPOTLIGHT , BACKLIGHT , A TW, A TWLOCK, S.GAIN, D.ZOOM, Y GET , DRS, TEXT MEMO, SLOT SEL, SHOT MARK, MAG A. L VL, L VL METER, PRE REC, WFM, LAST CLIP , FBC, LCD B.

140ページ

140 AUTO SW screen Item Setting Notes A.IRIS ON: Performstheautoiriscontrolinautomode.TheIRIS buttonisdeactivated. OFF: Deactivatestheautoiriscontrolinautomode.This performstheiriscontrolselectedwiththeIRISbutton.

141ページ

141 Menu Item Setting Notes REC FUNCTION Setsspecialrecordingmodes. NORMAL: Thespecialrecordingmodesarenotused. INTERV AL: Setsintervalrecording.

142ページ

142 RECORDING SETUP screen (continued) Item Setting Notes TC PRESET Setstheinitialtimecode. • Settheframevalueto0ormultiplesof5whenshooting/ recordingissetto24P ,24P A,or24PN. Ifanyothervalue,therecordedtimecodewillmis- match.

143ページ

143 Menu AUDIO SETUP screen Item Setting Notes LIMITER CH1 SetstheCH1limiter . ON, OFF • Whenthe AUDIO AUTO/MANU CH1switchissetto AUTO andautoadjustmentmodeis active,thelimiterisdisabled regardlessofthesesettings.

144ページ

144 Item Setting Notes INT MIC Determineswhetherornotinputfromtheinternal microphoneisusedduringrecording. ON: Usesinternalmicrophoneinput.

145ページ

145 Menu OUTPUT SEL screen Item Setting Notes SDI & HDMI SELECT SetsthetypeforthesignalformatoutputfromtheSDI OUTandHDMIOUT terminals. 1080i/720P: Follows1080i,720PsettingsofSYSTEMMODE.

146ページ

146 Item Setting Notes TC OUT SetsthetimecodetypeoutputwhenTCIN/OUT connectorisconnectedasTCOUT . TCG: Outputsthetimecodegeneratorvalueofthecamera- recorderatalltimes.

147ページ

147 Menu Item Setting Notes EVF PEAK LEVEL AdjuststhepeakingleveloftheviewnderandtheLCD monitor . – 7…0…+ 7 EVF PEAK FREQ Adjuststhepeakingfrequencyoftheviewnderandthe LCDmonitor .

148ページ

148 Item Setting Notes SAFETY ZONE Setsthesafetyzonedisplayedintheviewnderandon theLCDmonitor . • HD(1080i,720P) 90% 4 : 3 2 : 1 14 : 9 1.85 : 1 2.35 : 1 2.39 : 1 : : : : : : : 90 % display at 16:9 100 % display at 14:9 (between 16:9 and 4:3 size) 100 % display at 1.

149ページ

149 Menu Item Setting Notes ZOOM·FOCUS Selectstheunitofzoomandfocusvalues. OFF , NUMBER, mm/feet, mm/m <Note> Usethemm/feetormm/mdisplayonlyasageneral guidelinesinceitisnotentirelyaccurate.

150ページ

150 CARD FUNCTIONS screen Item Setting Notes SCENE FILE Reads/writesscenelesfrom/ontotheSDmemorycard. FILE SELECT : Selectssceneles(1–4). READ: Readstheselectedscenele(1–4)settingsstoredon theSDmemorycard.

151ページ

151 Menu OTHER FUNCTIONS screen Item Setting Notes USER FILE Savesuserlestocamera-recordermemory ,loadsthem intoc amera-reco rdermemo ryorin itializes them.(Pa ge60) LOAD, SA VE, INITIAL • ThisdoesnotaffectoptionsintheSCENEFILEscreen.

152ページ

152 OTHER FUNCTIONS screen (continued) Item Setting Notes TIME ZONE AddstoordeductsfromGMTthetimevalueof-12:00to +13:00in30-minutesteps.(Asanexception,youcanset +12:45.)Refertothetablebelow .

153ページ

153 Menu DIAGNOSTIC screen Item Setting Notes VERSION Indicatestheversionofthermwareusedinthiscamera- recorder . A subscreenprovidesdetailsonwhichrmwareversions areused.

154ページ

154 OPTION MENU screen OpenthismenubyholdingdowntheDISP/MODECHKbuttonandwhenshootingstatusappearspress thefrontMENUbutton. • Usethisfunctiontocheckconnectionstatusduringnonlinearediting.

155ページ

155 Reference Before calling for service Power supply There’snopower . • Makesurethebatteryand ACadaptorareconnected properly .Checktheconnectionsagain. ( Pa g e 2 1  of  V ol . 1 ) Powergoesoffassoon asitisturnedon.

156ページ

156 Before calling for service (continued) Shooting Cannotshooteven thoughtheP2cardis insertedcorrectly . • MakesuretheP2card’swrite-protectswitchisnotinthe PROTECTposition. Recordingisnotpossibleifitisinthisposition.

157ページ

157 Reference Playback Cannotplayevenwhen Ipresstheplaybutton. • IsthePB/THUMBNAIL lampon?IftheCAMERA lamp ison,pressthePOWER/MODEswitchsothatthePB/ THUMBNAIL lampturnson.

158ページ

158 Updating the rmware incorporated into the unit Checking the current version of the rmware using the unit and performing the update Checkrmwareversionofthecamera-recorderintheDIAGNOSTICscreen.

159ページ

159 Reference Cleaning When cleaning, do not use benzene or thinner . • Usingbenzineorpaintthinnersmaydeformthe camera-recorderand/orcausethesurfacenish topeeloff.

160ページ

160 Storage precautions Beforestoringthecamera-recorder ,removethe battery . Storealloftheseitemsinaplacewithlowhumidity andrelativelyconstanttemperature.

161ページ

161 Reference How to handle data recorded on P2 cards TheP2cardisasemiconductormemorycardthatisusedastherecordingmediumintheprofessional videoproductionandbroadcastingdevicesthatmakeuptheDVCPROP2Series.

162ページ

162 Checkpoints for using memory cards <Cautions in using SD memory cards> • Use the unit by inserting an SD memory card that is compliant with the SD standard or the SDHC standard. • MMC (MultiMediaCards) cannot be used. (Bear in mind that taking pictures may no longer be possible if you do use them.

Panasonic AG-HPX250P取扱説明書

URLを共有

類似の説明書