PanasonicメーカーAGCK10Pの使用説明書/サービス説明書
ページ先へ移動 of 41
Arbitrator-CP ver.1.9 Basic Operation [For Officers].
Arbitrator-CP Basic Operation for Officers -Contents- (1) Control Reference Guide z Front Camera (AG-CK10P) z P2 Recorder-VPU (AG-CPD15P) z Control Panel (AG-RCP30P) z Control Panel - User Friendly De.
Backlight compensation to make it brighter T(TELE) for Zoom In W(WIDE) for Zoom Out *Keep pressing this button for more than 2 seconds will stop recording.
(1) Control Reference Guide P2 Recorder - VPU (AG-CPD15P) REC button REC LED STOP button READY lamp Lights up when recording is ready BUSY lamp Lights up or flashes while a P2 card is accessed.
LCD Screen Auto Zoom Book Mark Backlight Compensation T: Zoom In W: Zoom Out REC/STOP Lamp Skip (Back/Forward) REC Button Live/Archive Switching Button STOP Button Audio 2 Mute Button/Lamp Mute Audio 2 and lamp lights on by pushing this butto n.
Live Control Mode Buttons Admin/Archive Control Mode Buttons (1) Control Reference Guide Control Panel (AG-RCP30P) - User Friendly Design 1. High Priority Buttons for Live Control Mode on the left side for easy access High Priority Buttons REC, STOP, Zoom in/out, Bookmark Auto Zoom, Backli ght compensation 2.
(1) Control Reference Guide Digital Wireless Microphone TX and RX (TDSS-900-PNA) Transmitter (TX) With Receiver (RX) Transmitter (TX) Talk ON : Green LED BATT : Red -In charging, Green -Fully charged .
(1) Control Reference Guide Version 1.0 : Digital Wireless Microphone TX Mode Talk Push REC Low Battery Out of Range Mute Push Off On BEEP Blue on Blue blink Red on Red blink fast Red off blink Vibrat.
Mode Talk Push REC Low Battery Out of range Mute Button Push OFF ON Mode 1 BEEP Blue OFF Blue ON Blue Blink Fast Blue LED OFF Beep ON Blue LED OFF Blink Slow Mode 2 Vibration Blue OFF Blue OFF Blue OF.
Mode Talk REC Low Battery Out of range Mute Push Off On Vibration Blue on Blue blink Red on Red Blink Red off No Vibration Blue off Blue off Red off Red off Red off Talk button Mute button Mode button (1) Control Reference Guide Version 1.5.3 : Digital Wireless Microphone TX Indication of LED BUTTON: TDSS-900 TX Version 1.
When appeared in Cont rol Panel OSD , execute “Resto re” [Camera] For users who do not use LPR (Lic e nse Pl ate Recognition mode) (“Init LPR Mode” in Admin s et up is “Dis able” as a factory default.
(2-b) Camera Menu for LPR (License Plate Recognition) In order to use LPR (License Plate Recogniti on) mode, the Administrator needs to set up “Init LPR Mode” as “Enable” in Admin/Camera menu.
(3) Record the video (Live Mode) Press REC button for (1) Control Panel, (2) Camera (Rear Panel) , or (3) VPU (P2 Recorder) *If the trigger is set, VPU will start recordi ng automatically when the trigger is on.
(4) Playback the recorded video (Archive Mode) (a) Press “Live/Archive” button of Control Panel to playback the video. (Playba ck starts from the lo cation wher e pl ayba c k was last ma de. Or if the recording was started or stopped prior to pressing “Liv e/Archiv e” button, playbac k starts from the b eginning of the file.
(5) Camera Control (a) Zoom “W”: Zoom Out “T”: Zoom In (b) Auto Zoom Press “Auto Zoom” button of Control Panel or Camera. (c) IR Mode Press “IR Mode” button switch in g to IR “Auto.
(6) Officer Information Register at the beginning of shift & delete at the end of shift (A) Register the Off icers inform ation (At the beginning of shift) (1) “Auto”: Plug USB memo ry (saved the officer information) to VPU. (2) “Manual”: Plug USB memory to VPU and press “Loa d” button.
Arbitrator-CP ver.1.9 Basic Set up & Operation [For Administrators].
Arbitrator-CP Basic Set up & Operation for Administrator -Contents- (1) -Before Use, Format 16GB P2 Card -16GB P2 Card Format by Products / Combination with Windows version (2) Control Panel Menu .
(1) Before use, Format 16G P2 card z Formatting 16G P2 card is mandato ry at th e first time usage. z When modified (copy, delete, move etc) fo lders in P2 Card, pl ease format the card. (If you copy the folders/ files from 5 slot P2 drive or PC PC MCIA to PC HDD, please format the card.
Format by How to format? SI (FE Application) By S I Menu, go to “Confi g”-”Operations”-”Format”. Control Panel By Control Panel Menu, go to “Setup Info”-”Admin ”-”File Manageme n.
(2) Control Panel Menu for Administrator [Setup/Info] [Top Menu] [Admin] Page 1/2 Record /Play mode set tings Officer R egi stration Trigger (8GP IO) settings Camer a s etti ngs Management mode For Of.
(3) REC/Play Set up by Administrator Power off time setting after shutting do wn the ignition Initial camera set ting, camera 1 or 2 Initial Audio 2 se tting, IN CAR or 2 nd WMIC or LINK CAM Start rec.
(4) Camera Control-Auto Zoom / IR Set up by Administrator [Admin] Page 1/2 From Control Panel Top Menu --”Setup info”—”Adm in” Adjust “Zoom Limit”, “x22” for optical or “x220” for digital 1. Adjust “Auto Zoom Magnific a tion” selectin g from “1 ,2,3,4,5,7,10,15, or 22” 2.
(5) Control Panel Key Lock All buttons except buttons in circle “REC” “Cursor Button” “Menu” “Return” “Control Panel On/Off”, “REC” on both VPU and Camera will be locked.
(6) On Screen Type set up by Officer / OSD set up by Administrator [Top Menu] On Screen Type set up by Officer, “AUTO”, “SIMPLE”, “DETAILS” or “OFF” *1. See more detail s on “Live mode on screen ty pe” and “Archive mode on scre en type”.
(6-a) Live Mode On Screen Type [SIMPLE] (1) (5) (3) (2) (4) (6) (7) (1) Remaining P2 ca rd re cor ding time (2) Mode indication ( P ause, Record) (3) Status Displ ay PON: Power On Recordi ng “ON” .
(6-b) Archive Mode On Screen Type [SIMPLE] (1) (5) (3) (2) (4) (6) (7) (1) (3) (4) (1) Play back fil ename (Lo cal time a t st art of recording) (2) Mode ind ication ( Playback, Pause, FF RW Slow) (3).
(7) Trigger (a) Set up by Administrator (1) Go to “Trigger” in “Admin” menu by Control Panel. (2) Select “Action” w hich you need when detect ing the trigger signal (Trigger 1 to 8).
(7) Trigger (b) Stop recording by Trigger OFF Stop Recording by Trigger OFF Detection (Level Signal Setting) REC Continue T ime (Timer Setting) Stop Recording Priority No (“Continue”) 1) “STOP” button is pressed. 2) Trigger OFF 1) “STOP” button is pressed.
(8) Menu (VPU settings) Copy (1) Plug an USB memory * to the VPU w hich settings n eed to be copied to ot her VPUs. (2) Go to “Operations” i n “Admin” menu by Control Panel and select “Menu Copy”. (3) Press “Copy” butto n if yo u agree to co py menu settings to the USB memory.
USB Memory (9) Event Type for Bookmark (a) Create an Event Type text and register it to VPU Plug an USB memory to PC EvType1=Criminal Arrest EvType2=Traffic Stop EvType3=DUI ● ● ● EvType10=Drinking Check (a) Plug the USB memory stored the event ty pe file “evtype.
(9) Event Type for Bookmark (b) How to Add / Delete the Bookmark? Event Ty pe Loaded to VPU Press “Bookmark” butt on while appears. Press “Bookmark” butt on. w ill appear. NO NO Press “Bookmark” butto n. will appear and select the e vent type.
(10) Officer/Admin Information Set up -Contents- 1. Admin Set up (1) Creating Text Files and Saving in USB memory 2. Admin Set up (2) Text Files for Officer/Admin 3. Admin Set up (3) How to register Officer/Admin information? 4. Admin Set up (4) How to log in “Admin” menu? 5.
-Officer/Admin Information Set up by Control Panel- Admin Set up (1) Creating Text Files and Saving in USB memory (1) Officer Data File: “wid*****.tx t “ (Up to 8 char a cters for file name , 1 text file p e r officer, Max 2 text fi les) USB Memory (3) Administrator Registration File “wadmin.
-Officer/Admin Information Set up by Control Panel- Admin Set up (2) Text Files for Officer/Admin (1) Officer Data File: “wid*****.txt “ *With in 8 characters fo r file name, 1 text file per officer , Max 2 text files (2) Officer Registration File: “wofficer.
-Officer/Admin Information Set up by Control Panel- Admin Set up (3) How to register Officer/Admin information (A) Before registering the Office rs, Administrator needs to set “Management Mod e” in “Admin ” menu such as “Auto”, “Man u al” or “L ist” for Officer registration m ode.
-Officer/Admin Information Set up by Control Panel- Admin Set up (4) How to Log in “Admin” menu? # James Bond FirstName=James Middle Name= LastName=Bond ID=ICV007 Password=007 How to Log in “Setup/Admin” menu by administrator? (1) Create Officer Data File (wid** ***.
-Officer/Admin Information Set up by Control Panel- Admin Set up (5) How to delete Admin/Officer information? How to delete Admin information when Ad min information had registered in VPU? (1) Log in “Admin” menu followed by Admin Set up (4) (2) Create a blank Admi n Registration File (wadmi n.
How to register the Of ficers inform ation at the beginning of the shift? (1) Plug USB memory saved the Of ficer in formation as the file “wid*****.txt” (2) Go to “Officer” by Control Panel me.
How to delete Officers informat ion at the end of the shift? (1) Go to “Officer” by Control Panel me nu. If either “Manual” or “List” in “Management Mo de” is set by Administrator, delete it at “Officer” (2) Please overwrite the n ext one or two officers by USB memo ry saved Officer Data File ( wid*****.
Officer Dat a File “ wid*****.txt ” Officer Registration File “ wofficer.txt ” Administrator Registration File: “ wadmin.txt ” 1) Max 500 officers in 1 text file 2) Ne ces sa ry only wh en using “Officer List” m ode 3) Shift time, shift, area and source will NOT be registered.
デバイスPanasonic AGCK10Pの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Panasonic AGCK10Pをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPanasonic AGCK10Pの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Panasonic AGCK10Pの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Panasonic AGCK10Pで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Panasonic AGCK10Pを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPanasonic AGCK10Pの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Panasonic AGCK10Pに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPanasonic AGCK10Pデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。