PanasonicメーカーAJ-SPC700 Pの使用説明書/サービス説明書
ページ先へ移動 of 124
Memory Card Cam era Recorder Operating Instructions Model No. AJ- P Before operating this product, pleas e read the insr u ctions c aref ully and save this manual for future u se.
2 Caution regarding l aser beams The CCD may be damag ed if i t is sub jected to light from a la ser beam . When us ing th e camera-r ecorder i n locati ons wher e laser irradiatio n equi pment i s used, be ca reful not to allow the lase r bea m to sh ine di rectly on the lens.
3 Precautions f or Use indica tes safe ty inf ormation. ATTENTION: The pr oduct yo u hav e purchas ed is p owered b y a nick el cadmiu m battery w hich is rec yclable . At the end of it ’s useful life, under variou s sta te and loc al laws , it is il legal to dispo se of th is battery into your m unicipa l waste stre am.
4 Contents Precauti ons for Use . . . . . . . . . . . . . . . . . 3 Chapter 1 Introducti on . . . . . . . . . . . . . . 7 1-1 Camera Un it Featu res . . . . . . . . . . . . . . . . . . .7 1-2 Recorde r/playe r Featu res . . . . . . . . . . . . . . . .
5 Content s (continued) Chapter 5 Prepa ration . . . . . . . . . . . . . 64 5-1 Power Supp ly . . . . . . . . . . . . . . . . . . . . . . . . 64 5-1-1 Mounting the Bat tery and Setting the Battery Type . . . . . . . . . . . . . . . . . 64 5-1-2 Using an AC Power Supply .
6 Contents (co ntinued) Chapter 8 Menu Description Tables . . 98 8-1 Menu C onfigurat ion . . . . . . . . . . . . . . . . . . . .98 8-2 SYSTEM SETTING . . . . . . . . . . . . . . . . . . . .99 8-2-1 SYSTEM MODE . . . . . . . . . . . . . . . . . . . . .
7 1 Chapter 1 Intr oduction The AJ-SPC700P vide o camera-recorder integrates a came ra unit equipped wi th three CCDs, incor porating a 2/ 3-inch on- chip len s, and a video recorde r/pla yer (VTR) that suppor ts D VCPR O50, D VCPR O and D V formats .
8 Chapter 1 Int r oduction (continued) / 4-channel Digital A udio Recording (all f ormats) All f o rmats - D VCPRO , D V and D VCPRO50 - support 4- channe l digita l audio rec ording wi th high-qual ity so und (48 kHz /16 bit s).
9 1 Chapter 1 Intr oduction (continued) / Recording Time (For more i nformation, see th e inst ruction ma nual for the appropria te memory c ard.) <Notes > z Opera tion of the f ollowing P2 card.
10 Chapter 1 Int r oduction (continued) 1-3 System Configuration * F or the latest inf or mation on P2 cards and SD mem ory cards not a vailab le in the op erati ng Instructio ns, v isit the P2 Suppo r t Desk at th e f ollowing Web sites . https://e ww .
11 2 Chapter 2 P ar ts and their Functions 2-1 P ower Supply and Accessor y Mounting Section PO WER sw itch Used to tu rn on/off the po wer . Battery mount A battery pack from Anton/ Bauer is m ounted her e.
12 Chapter 2 P ar t s and their Fun ctions (continued) 2-2 Audio (input) Function Section MIC IN (microphone input) jack (XLR, 3-pin) A microph one (option al accessory) is conn ected here . P ower for the microphone co mes from thi s jac k. A remote mi crophone ma y be co nnected.
13 2 Chapter 2 P ar t s and their Fu nctions (con tinued) 2-3 A udio (output) F unction Section A UDIO OUT connector (XLR, 3-pin) This con nector outp uts audio s ignals rec orded on Channe ls 1, 2, 3 or 4. Output s ignals are s elect ed with the MO NIT OR SELECT CH1/2 / CH3/4 select or s witch.
14 Chapter 2 P ar t s and their Fun ctions (continued) 2-4 Shooting and Recor ding/Playbac k Functions Section / Shooting and Recording (camera unit) CC/ND FIL TER (filter s elector) control Used to select a filter ap propriate f or illuminatio n and color te mperatu re of the subjec t.
15 2 Chapter 2 P ar t s and their Fu nctions (con tinued) OUTPUT/A UT O KNEE selector switc h Used to select th e video s ignals s ent from the camer a unit to th e memory , viewfi nder and v ideo mon itor . CAM. A UTO KNEE ON: Video bein g recorded through th e camera is sent with the auto k nee circ uit activ ated.
16 Chapter 2 P ar t s and their Fun ctions (continued) VIDEO OUT OUTPUT SEL s witch Used to s witch the si gnals output f rom the VIDE O OUT connec tor . MEM: In EE (recording ) mode , video fro m the ca mera is output. In VV (playb ack) mo de, pl ay bac k signal from a P2 c ard is ou tput.
17 2 Chapter 2 P ar t s and their Fu nctions (con tinued) VIDEO OUT (video signal output) connector This co nnect or outputs video s ignals . The video signa ls link ed to the se tting of the VIDEO OUT OUT PUT SEL s witch a re output f rom here . OPTION SLO T Attach t he video encod er card (AJ-Y AX800G, option al).
18 Chapter 2 P ar t s and their Fun ctions (continued) 2-6 Time Code Section GENLOCK IN connector (BNC) This con necto r is used to i nput a ref erence signa l bef ore the c amer a uni t is gen -l ocked, or be fore th e time code is exter nal ly lo cked.
19 2 Chapter 2 P ar t s and their Fu nctions (con tinued) 2-7 W arning and Status Displa y Functions Back tally lamp When the BA CK T ALL Y switch is set to [ON], the lamp beha ves in the same w ay as the fron t tally la mp at the vie wfinder . BA C K T ALL Y sw it ch This s witch controls the action of the bac k and rear tally lamp s.
20 Chapter 2 P ar t s and their Fun ctions (continued) P osi tions of time c ode-rela ted switches and information pr ovided 2-9 LC D Monitor LCD monitor The L CD monit or displa ys the v ideo in th e vie wfinde r . Alternativ ely , it can show clips on the P2 card in a thumbn ail f or mat.
21 2 Chapter 2 P ar t s and their Fu nctions (con tinued) 2-10 Vie wfinder Viewfinder (opt ional access ory) During reco rding or pla yback, t he viewfi nder disp la ys the vide o image in mon ochrome . It also di spla ys warnings , messages , zebra pat terns, markers (saf ety zone and cent er marke rs), etc .
22 Chapter 3 Recor ding and Pla ybac k 3-1 P2 Car ds Inser ting P2 Cards <Note> When usin g the camer a-recorde r for the first ti me, be s ure to set the time data bef orehand. On how the time data is set , see [4-5 S etting Time Data]. 1 T urn on the PO WER swit ch.
23 3 Chapter 3 Recording and Pla yback (contin ued) Removing P2 Card s 1 While pr essi ng d own th e sli de l ock butt on, move th e slide-o ut door to the left. The door opens . 2 Tilt do wn the EJECT b utton. 3 Then, d epress the EJ ECT b utton to release the P2 c ard so that you can re mo ve it.
24 Chapter 3 Recording and Pla yback (continued) 3-2 Basic Pr ocedures This sec tion des cribes the basi c procedure f or shooting and recording . Bef ore y ou embark on a shoot , pre-inspect y our system to ensure that it w orks properly . * F or directions on inspect ing your memor y card c amera-recorder , see [7-1 Inspections B efore Shooting].
25 3 Chapter 3 Recording and Pla yback (contin ued) Shooting White/Black Balance A djustment to Recording Completion F or shoot ing, f ollow th e steps b elow . 1 Select a filter accordin g to light condi tions. 2A When the wh ite b al anc e is save d: P osition the WHITE BAL s witch to [A] or [B].
26 Chapter 3 Recording and Pla yback (continued) 3-3 Normal R ecor ding Pressing either the REC ST ART/ST OP but ton, REC b utton on the han dle or VTR b utton at the lens s tarts recording o f video an d sound on the P2 card.
27 3 Chapter 3 Recording and Pla yback (contin ued) 3-5 Loop Recording When tw o or more P2 card s lots conta in cards , this function allows the target P2 card to be s witched in ord er . Eve n when the f ree spac e of a P 2 car d is used up, this fu ncti on contin ues recording w hile er asing e xisting data.
28 Chapter 3 Recording and Pla yback (continued) 3-7 N ormal and V aria ble Speed P l ay b a ck The P LA Y/P A U SE butto n provid es mo nochr ome playback through the view finder and c olor pla yback on the LCD monitor . A c olor vide o monito r connec ted to th e VIDEO OUT connect or of the AJ-SPC700 P also pro vides color pl aybac k.
29 3 Chapter 3 Recording and Pla yback (contin ued) Associating V oice Memos with a Clip The portion of the clip with whic h a voi ce memo is associ ated depen ds on when the vo ice mem o is reco rded.
30 Chapter 4 Adjustments an d Settin gs f or Recor ding T o record high-qual ity vide o with the AJ-SPC700P , the black and whi te balanc es mu st be adjusted accordin g to conditio ns.
31 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) Detection area for the w hite balance The detec tion area f or th e white ba lance is sel ectab le betwe en 90%, 50% and 25% , using the men u optio n A WB AREA.
32 Chapter 4 Adjustm ents and Settings for Recor din g (continued) 4-1-2 Adjust ing the Black Balance The b lack bala nce m ust be ad justed when: z Y o u us e your AJ -SP C70 0P t he f irs t ti me; z.
33 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) 4-2 Setting the Electr on ic Shutter This secti on provides a desc ription of the electroni c shutter , together w ith setting and handling di rections .
34 Chapter 4 Adjustm ents and Settings for Recor din g (continued) 4-2-3 Placing t he Camera- recor d er in SYNCHRO SCAN Mode T o place the camera-recorder in SYNCHRO SCAN mode, f ollo w the s teps b elow . 1 Pre ss t he S HUT TER switch posi tion ed at [ON] toward s [SEL], to pl ace the camera-record er in SYNCHR O SCAN mode.
35 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) 4-4 Selecting Audio Input Signals and Adjustin g Recording Le vels In any f ormat (D VCPR O50, D VCPR O or D V), the AJ- SPC700P supp or ts f our-cha nnel audi o recor ding.
36 Chapter 4 Adjustm ents and Settings for Recor din g (continued) 4-4-2 Adjusting Recor ding Levels T o adjust the recordin g le vel s fo r A udio Chan nels 1 and 2, f ollo w the s teps b elow .
37 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) 4-5 Setting Time Data 4-5-1 Setting th e User Bits The use r bits allo w inf ormation, incl uding memos that us e up to eight-dig it base 16 numbers (date and time), to be recorded i n the Subc ode area.
38 Chapter 4 Adjustm ents and Settings for Recor din g (continued) 4-5-2 Setting t he Internal Cloc k’ s Dat e and Time 1 P osition the DISPL A Y swi tch at [ UB]. 2 Press the HOLD butt on to d ispla y a date i n the dis pla y win dow . 3 P osition the TCG s witch at [SET].
39 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) 4-5-3 Setting the Time Code 1 P osition the DISPLA Y s witch at [TC]. 2 P osition the TCG s witch at [SET]. 3 Set the menu option TC M ODE to “DF” or “ND F”. “DF” steps th e time code in drop fr ame mode , and “NDF” steps it in non-d rop frame mode .
40 Chapter 4 Adjustm ents and Settings for Recor din g (continued) T o externally lock the time code F ollo w the s teps b elow . 1 T urn on the PO WER swit ch. 2 P osition the TCG s witch at [F -RUN]. 3 P osition the DISPL A Y swi tch at [ TC]. 4 Set the men u option G ENLOCK to “EXT”.
41 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) 4-5-5 Pr oviding an ID to the Camera The came ra ID is spe cified thro ugh the <CAMERA ID > scree n. The ID can in clude up to 10 alphan umeric char acters , symbol s, and/or spa ces.
42 Chapter 4 Adjustm ents and Settings for Recor din g (continued) 4-5-7 CTL Count Setting and Display By setti ng the DISPLA Y s witch to “CTL ”, CTL count is displa yed on the time count i ndication of the LCD displa y wind ow . The CTL co unt is displ a ye d in ±12 hours w ith non-drop - frame .
43 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) 4-6 Menu Displa ys in the Vie wfinder Sc reen 4-6-1 Menu Configuration USER MENU: USER MENU is f actory-set.
44 Chapter 4 Adjustm ents and Settings for Recor din g (continued) 2 T urn the JOG d ial b utton to mo ve the ma r k ( ) to a des ired menu opt ion. Th en, p res s th e JOG dia l butto n to displa y the sub-menu sc reen. 3 T urn the JOG d ial b utton to mo ve the ma r k ( ) to a des ired menu opt ion.
45 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) 4-7 Vie wfinder Sc reen Status Displa ys In addition to vi deo images, the vie wfinder displa ys lamps and t ex t that indicat e the settings and op erati ng statu s of the AJ-SPC700 P , together with m essage s, a c enter mark er , a saf ety zone mark er an d the camer a ID .
46 Chapter 4 Adjustm ents and Settings for Recor din g (continued) Inf ormation Item Indication Status Extender EX2 Lens ex tender used. MODE CHECK Indication Area (ST A T US: Master gain, USER SW GAIN ) LOW/MID/ HIGH –3 to 30 S.GA IN 30/36 V alue set f or the master gain Example: LOW: 0 Gain value to which S .
47 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) Inf ormation Item Indic ation Status Camera W arning and Report Area (related to A WB, ABB and switch settings) A WB A ACTI VE A WB B ACTI VE A WB A OK _ . _ K A WB B OK _ . _ K A WB BREAK _ .
48 Chapter 4 Adjustm ents and Settings for Recor din g (continued) Inf ormation Item Indication Status Gain v alue __ dB Current gain value . System inf ormation and warnings SYST EM ERR OR- __ TURN P.
49 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) Inf ormation Item Indic ation Status PRE RECORDING indication/ SD me mor y ca rd rema inin g fr ee sp ace (when MODE CHECK is being p erform ed) P-REC (blink) __ h __ m Indicated while pre-recorded video and audio are being recorded on the P2 card.
50 Chapter 4 Adjustm ents and Settings for Recor din g (continued) *The menu o ption P2CARD REMAIN can b e fou nd in the < VF INDICA T OR2> screen, whic h is accessible fr om the VF page. *1 n : Not provided when the menu option ST A T US is set to O FF , which can be f ound in the <M ODE CHK IND> scree n, accessible from the VF page.
51 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) 4-7-4 Display Modes and S etting Cha nges/adjust ment Result Message s The mes sages th at appear on the vie wfinder screen to indicate chang es to setti ngs and ad justmen t result s ma y be limited, or set not to appear , through the menu opt ion DISP MODE .
52 Chapter 4 Adjustm ents and Settings for Recor din g (continued) 4-7-5 Setting t he Marker Displa ys The cent er , saf ety z one , safety zone area an d fra me mark ers ma y be set to ON or OFF , along with specifi cations o f the marker types .
53 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) 4-8 Adju sting and setting the L CD monito r Using the LCD Monitor 1 T ur n on the PO WER switc h of the AJ -SPC700P . 2 Slide the OPEN button in the arro w direction to open th e LCD mon itor .
54 Chapter 4 Adjustm ents and Settings for Recor din g (continued) 4-9 Menu-driven Function Setup Each func tion is se t up us ing t he m enu sy stem. 4-9-1 Setting t he Switc ho ver of USE R SW GAIN In additi on to th e standard L/M/H gain mode , the AJ- SPC700P su ppor ts an S .
55 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) 4-9-4 Assigning Functions to USER MAIN, USER1 and USER2 Buttons The USER MAIN, USER1, and USER2 but tons can be assigne d user -selected function s. T o selec t desired fu nctions , us e the men u options USER MAIN SW , USER1 SW and USER2 SW .
56 Chapter 4 Adjustm ents and Settings for Recor din g (continued) 4-10 Handling data Setting Data Using an SD memory card An SD memo r y card (opti onal acce ssory) can be used as a setu p car d tha t st ores up t o ei ght file s of setti ngs menu specifi cations.
57 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) 4 T o format the SD memory card, turn the J OG dial bu tton to mo ve the curs or to YES.
58 Chapter 4 Adjustm ents and Settings for Recor din g (continued) 6 T urn the JOG di al b utton until a des ired char acter appears . The chara c ters that a ppear are sw itched i n the followin g or.
59 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) T o read data on an S D memor y card 1 T ur n the JOG dial bu tton to mo v e the cursor t o the option [ SD CARD READ/WRITE]. Then, press the d ial bu tton. 2 T ur n the JOG dial bu tton to mo v e the cursor t o the men u option [R.
60 Chapter 4 Adjustm ents and Settings for Recor din g (continued) 4-10- 3 How to Use the Use r Data It is possib le to transf er settings and othe r data to the user area of the internal memo r y of the AJ-SPC700P . This da ta allows yo u to quic kly repro duce an optim um setup state .
61 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) 4-10- 4 Ho w to Use Scene Fil e Data It is poss ibl e to write t he setting s data int o the scene file area of the inte rnal memory of the AJ-SPC7 00P , or to read d ata written in this are a.
62 Chapter 4 Adjustm ents and Settings for Recor din g (continued) T o read settings data for scene files 1 Navig ate the me nu to th e <SCENE> scree n. 2 T ur n the JOG di al butt on t o move th e curs or to t he option SCENE SEL. 3 Press the JO G dial b utton to b link scene file nu m bers .
63 4 Chapter 4 Adjustments an d Settings f or Recording (contin ued) T o title settin gs data for scene file s 1 Nav igate the menu to the <SCENE> screen. 2 T ur n the JOG dial bu tton to mo v e the cursor t o the optio n [T ITLE s 1 - 4] for the appr opr iat e sc ene f ile.
64 Chapter 5 Preparation 5-1 P ower Suppl y A bat ter y pack or AC power can be used as th e power supply f or the camera-rec order . Using a Ba ttery Pack Battery pac ks from th e follo wing man uf a.
65 5 Chapter 5 Preparation (continued) When using a BP-90 type battery pack 1 Remo ve the ba ttery holder . 2 Attachin g the batte r y case to the cam era-reco rder . Connect the c ab le on the came ra-record er to the cab le on the battery case (BP-90 type).
66 Chapter 5 Preparation (continued) Using an NP-1 type batter y pack 1 Remo ve the battery holde r . 2 Mount the NP-1 type batte ry case on the ca mera- recorder . Tighten t he mounting sc rew s. Tighten t he power co ntact scre ws. Insert the uppe r par t of t he remo v ed co ver in the directio n of the arro w .
67 5 Chapter 5 Preparation (continued) 5-1-2 Using an A C P ower Supply When using the P anasonic AJ-B75 A C adapter 1 Plug the AJ-B75 DC O UT connec tor into t he camer a- recorde r’ s external DC input soc ket. 2 T ur n the A C adap ter pow er ON.
68 Chapter 5 Preparation (continued) 5-3 Mo unting the lens an d P erf o rming the Flange Bac k and White Shading Adju stments Mounting the Lens 1 Raise th e lens cl amping le ve r and remo ve the m ount cap . 2 T o mount the lens, a lign the inden tation at the top cent er of th e le ns mou nt wi th t he ce nte r mar k of th e lens.
69 5 Chapter 5 Preparation (continued) Adjusting the Lens White Sha ding T ak e the f ollow ing step s to ad just the w hite sh ading: <Note> V ertical coloring m ay occur near the op en posi tion of the lens iris , ev en after adjust ing the white s hading.
70 Chapter 5 Preparation (continued) This co mpletes the white sh ading ad justment. The com pensatio n values are s tored in the no n-vo latile internal memory . Theref ore , re-adjust ing the whi te shadin g is not require d, e ven after the camera -recorder powe r has been turned off .
71 5 Chapter 5 Preparation (continued) Reading out the Lens File Data 1 Select the lens file No . to read out b y f ollowing Steps 1 to 3 in the [Storing the Lens File Data] section. 2 T ur n the JO G Dial b utton to mo v e the cu rsor to [READ:]. 3 Press the JOG Dial bu tton and the follo wing message appears .
72 Chapter 5 Preparation (continued) 5-4 Prep aring f or A udio In put T ak e the f ollow ing ste ps to p repare the camera f or conn ecting au dio input de vices. 5-4-1 When Using the Front Micr opho ne The AJ-M C700P micr ophone kit (opti onal) includes a microph one that c an be mou nted on th e camer a.
73 5 Chapter 5 Preparation (continued) 5-4-3 When Using A udio Devices 1 Connect the audio de vice to the A UDIO IN jac k with the XL R c a bl e. 2 Set the A UDIO IN s witch to [REAR] f or the chann el to whic h the XLR ca ble is con nected. 3 Set the LINE/M IC/+48V selec tor s witch on the rea r panel t o [LINE].
74 Chapter 5 Preparation (continued) <Notes> z A USB dr iver must be inst alle d on the PC. z AJ-SPC700P is onl y applicab le to USB 2.0, not to USB 1.1. z Only o ne AJ-S PC700P at a time mu st be connec ted to the P C via US B. z The P2 card m ust not be remo ved when i t is conne cted via USB .
75 5 Chapter 5 Preparation (continued) 5-7 Attaching the Sh oulder Strap T o deta ch the shou lder stra p, first op en the ho oks, then detach th e str ap .
76 Chapter 5 Preparation (continued) 5-10 Attaching the Front A udio Level Control Knob If yo u use t he F ront A udio Le vel control fre quently , attach the access ory knob so that it can be easily operated . Remov e the scre w in the cente r of the F ront A udio Le vel control, an d attach the access ory knob using the scre w (include d).
77 6 Chapter 6 Manipulating Clips with Thumbnails A clip is a data g roup th at inclu des the im ages an d voices created fr om one shooting sessio n, toge ther with ad ditional inf or mation su ch as v oice memos and meta data.
78 Chapter 6 Manuipulating Clips wit h Thumbn ails (continued) 6-2 T humbnail Screen Press th e THUMBNAIL button to displa y the t humbnail screen on the LCD monitor . Pressi ng the THUMBNAIL butto n again returns the dis pla y to the regular d isplay .
79 6 Chapter 6 Manuipula ting Clips wit h Thumbnails (continued) Indicator for clips with pr oxy This ma rker i s displa yed f or clips wi th pro xy attach ed. Indicator for edit copy clips This mar ker is disp layed for clips whos e ed it c opy oper ation w as perf ormed on the P2 dec k.
80 Chapter 6 Manuipulating Clips wit h Thumbn ails (continued) 6-5 Switching the Thumbnail Display The displ ay can be switch ed so that o nly those clips matchin g the sp ecified co nditions are disp la yed in the thumbnai l screen. 1 Press the T HUMBNAIL b utton.
81 6 Chapter 6 Manuipula ting Clips wit h Thumbnails (continued) 6-7 V oice Memo A vo ice mem o is audi o data that c an be attached t o the clip separ ately from the v oice recorded during shooti ng. <Note> A vo ice mem o can be attach ed during reco rding.
82 Chapter 6 Manuipulating Clips wit h Thumbn ails (continued) 6-7-3 Deleting V oice Memos 1 P erfor m S teps 1 to 4 in the [6-7-1 Pla ying Ba ck V oice Memos] s ection to select the v oice memo in the cl ip. 2 Mov e the pointer o ver the c lip y ou wa nt to delete , and press the M ENU BAR button .
83 6 Chapter 6 Manuipula ting Clips wit h Thumbnails (continued) 6-11 Copying Clips Selected clips can be copied to the P2 card or SD memory card in th e desired slot. 1 Press th e THUMBNAIL b utton. The thum bnai l screen a ppears on the LCD m onitor .
84 Chapter 6 Manuipulating Clips wit h Thumbn ails (continued) 5 Names o f metadata u pload files stored on the SD memory card a re displa yed. Select the des ired files us ing t he c urs or butt ons, and choos e YE S. Up load starts. Uploade d metada ta is reta ined e ven i f the pow er is turned off .
85 6 Chapter 6 Manuipula ting Clips wit h Thumbnails (continued) Selecting the USER CLIP NAME recording method Select M ET A DA T A USER CLIP NAME from the menu bar to se lect the recordi ng metho d. T wo optio ns are av ailable: T YPE1 and TYPE2.
86 Chapter 6 Manuipulating Clips wit h Thumbn ails (continued) 6-14 Formatting a P2 Card 1 Press the T HUMBNAIL b utton. The thumb nail screen app ears on th e LCD mon itor . 2 Press the MENU BAR b utton. The pointer mo v es to the menu bar . 3 F rom the me nu bar, selec t OP ERA T ION F ORMA T .
87 6 Chapter 6 Manuipula ting Clips wit h Thumbnails (continued) 6-16 Setting the Thumbnail Display Mode The thum bnail dis pla y mode ca n be customised to suit y our pref erences. 1 Press th e THUMBNAIL b utton. The thum bnai l screen a ppears on the LCD m onitor .
88 Chapter 6 Manuipulating Clips wit h Thumbn ails (continued) 6-17 Pr oper ties The clip ’ s properties and the P2 card’ s status are di spla yed. 6-17-1 Clip Pr oper ty F rom the menu bar , select PRO PER TY CLIP PROPER TY . The f ollowin g screen appears .
89 6 Chapter 6 Manuipula ting Clips wit h Thumbnails (continued) Contents of P2 Card Status Displa y Settings F rom the m enu b ar, selec t PROPE R TY CARD ST A TUS. The f ollowing s creen app ears. When “REM AIN” is selected: Write-protect Mark The mar k ap pea rs if t he P2 car d is wr i te-p rote cte d.
90 Chapter 6 Manuipulating Clips wit h Thumbn ails (continued) 6-17-3 S D memory car d Status Displa y The status displa y enab les a con fir mation of the SD memory card f or matted condition , ava ilab le memory capacity etc. F rom the menu bar , sele ct PROPER TY DEVICES SD CARD .
91 7 Chapter 7 Maintenance and Inspections 7-1 Inspections Bef ore Shooting Mak e sure yo u check that the sy stem is ope rating normally bef ore embarking on a shoo t. W e recom mend usin g a color video m onitor t o check the i mage. 7-1-1 Preparing f or Inspections 1 Mount a charged batter y pac k.
92 Chapter 7 Maintenance and Ins pections (continued) 7-1-3 Inspecting the Memory Recording Functions Mak e sur e yo u succe ssiv ely carry out the in spect ions from [1. Inspe cting t he P2 Card Rec ording] to [ 4. Inspec ting the Earphone and Speak er].
93 7 Chapter 7 Maintenance and In spections (continued) 6. Inspection of the clock, time code, and user bi ts 1 Set the u ser’ s bit as required. Please re f er to [4-5-1 Sett ing the User Bit s] f or the setti ng p roc edu res. 2 Set the ti me code .
94 Chapter 7 Maintenance and Ins pections (continued) 7-2-4 Connector Signals P anasonic P a r t No. K1AA104H00 38 Manuf acturer Part No. HA16R X-4P(SW1) (Hirose Electric Co.) <Not e> Confirm corre ct polarity w hen usin g an exter nal power su ppl y .
95 7 Chapter 7 Maintenance and In spections (continued) 7-3 W arning System 7-3-1 W arni ng Description T abl es If a prob lem is detec ted imm ediately after the po wer is turned on, o r during operati on, this w ill be i ndicated by t he W AR NING lamp , lamps in side t he vie wfinde r and a w ar ning tone .
96 Chapter 7 Maintenance and Ins pections (continued) 5. P2 Card Fully Recor ded Displa y window indic ation All 7 bar indicators for remaining MEDIA capacity star t blinking. W ARNING lamp C ontinues to light up until an operation is performed. Ta l l y l a m p Continues to blink 4 times per second u ntil an operation is per f orm ed.
97 7 Chapter 7 Maintenance and In spections (continued) 7-3-2 Error Codes The f ollowin g error c odes are d i spla yed in the displ ay wind ow if an erro r oc cur s in t he c amer a: 9. Batter y Nearly Empty Displa y window indi cation One of the bars in the batter y remaining indi ca tor st ar ts blin kin g.
98 Chapter 8 Men u Description T ab les 8-1 Menu Configuration Abou t Menu D esc rip tio n T ables USER MENU USER MENU SELECT SYSTEM SETTING P AINT CAM OPERA TION SYSTEM MODE OPTION MODE REC FUNCTION .
99 8 Chapter 8 Menu Description T a bles (continued) 8-2 SYSTEM SETTING 8-2-1 SYSTEM MO DE 8-2-2 OPTION MODE <Note> Menu opt ions for setti ng 1394 are displa yed when an IEEE1394 in terf ace board (AJ-Y AD800G, optional ) is attached . F or more inf or mation, se e the AJ-Y AD800G instruction m anual.
100 Chapter 8 Menu Description T ables (continued) 8-2-3 REC FUNCTION 8-2-4 OUTPUT SEL The ____ i n the Adjustab le Rang e column indicates the preset m ode . Items/ Data Saved Adjustable Range Remarks PRE R EC MODE ON OFF Select whether or not to enabl e PRE RECORDING.
101 8 Chapter 8 Menu Description T a bles (continued) 8-2-5 LCD MONIT OR 8-2-6 GENLOCK The __ __ in the Adj ustab le Range colu mn indicates the preset m ode . Items/ Data Saved Adj ust ab le Range Remarks BRIG HTNE SS –7 : +0 : +7 Adjust the LCD m onitor brightness.
102 Chapter 8 Menu Description T ables (continued) 8-3 P AINT 8-3-1 R OP 8-3-2 MA TRIX <Note> The it ems in dicated b y are the setting items f or P AINT MENU SW( ) R/W in the <SD CARD R/W SELECT> screen. T he items w ithout are the sett in g it ems for P A INT MENU LEVEL R/W .
103 8 Chapter 8 Menu Description T a bles (continued) 8-3-3 COLOR COR RECTI ON 8-3-4 LO W SETTING <Note> The it ems ind icated b y are the setting items f or P AINT MENU SW( ) R/W in the <SD CARD R/W SELECT> screen. Th e item s withou t are the sett ing items for P AINT MENU LEVEL R/W .
104 Chapter 8 Menu Description T ables (continued) 8-3-5 MID SETTING 8-3-6 HIGH SETTI NG <Note> The it ems in dicated b y are the setting items f or P AINT MENU SW( ) R/W in the <SD CARD R/W SELECT> screen. T he items w ithout are the sett in g it ems for P A INT MENU LEVEL R/W .
105 8 Chapter 8 Menu Description T a bles (continued) 8-3-7 ADDITIONAL DTL 8-3-8 SKIN T ONE DTL <Note> The it ems ind icated b y are the setting items f or P AINT MENU SW( ) R/W in the <SD CARD R/W SELECT> screen. Th e item s withou t are the sett ing items for P AINT MENU LEVEL R/W .
106 Chapter 8 Menu Description T ables (continued) 8-3-9 KNEE/LEV EL <Note> The it ems indi cated by are the setting ite ms f or P AINT MENU SW( ) R/W in the <SD CARD R/W SELECT> screen. Th e item s withou t are the sett ing items for P AINT MENU LEVEL R/W .
107 8 Chapter 8 Menu Description T a bles (continued) 8-3-1 2 CAMERA SETTING ZEBRA Pattern Displa y <Note> All items in CAMERA SETTING ar e setting ta rgets of the item P AINT M ENU SW( ) R/W in the <SD CARD R/W SELECT> screen. 8-4 VF 8-4-1 VF DISPLA Y The __ __ in the Adj ustab le Range colu mn indicates the preset m ode .
108 Chapter 8 Menu Description T ables (continued) 8-4-2 VF MARKER 8-4-3 US ER BO X 8-4-4 VF INDICA T O R1 The ____ i n the Adjustab le Rang e column indicates the preset m ode . Items/ Data Saved Adjustable Range Remarks TA B L E A B Select the VF M ARKER set ting table.
109 8 Chapter 8 Menu Description T a bles (continued) 8-4-5 VF INDICA TOR2 8-4-6 MODE CHECK IND The __ __ in the Adj ustab le Range colu mn indicates the preset m ode . Items/ Data Saved Adj ust ab le Range Remarks P2CA RD REMA IN OFF ONE-CA RD TOT A L Select the indication mode f or the P2 card’ s remaining capacit y .
110 Chapter 8 Menu Description T ables (continued) 8-4-7 !LED <Note> If both GAI N (0 dB) and G AIN (–3 dB) are s et to ON, the LED ill uminates ex cept when GAIN is adjusted to 0 d B and –3 dB . 8-5 CA M O PER A T ION 8-5-1 CAMERA ID <Note> This se tting is canc eled wh en READ F ACT OR Y D A T A is selec ted .
111 8 Chapter 8 Menu Description T a bles (continued) 8-5-3 SHUTTER SELECT 8-5- 4 USER SW <Note> Fo r each function of the USER s witches , ref er to [4-9-4 Assigni ng Functio ns to USER MAIN, USER1 and USER2 Buttons]. The __ __ in the Adj ustab le Range colu mn indicates the preset m ode .
112 Chapter 8 Menu Description T ables (continued) 8-5-5 SW MODE 8-5-6 WHITE B ALANCE MODE The ____ i n the Adjustab le Rang e column indicates the preset m ode . Items/ Data Saved Adjustable Range Remarks RET S W R EC CHECK CAM RET Select the RET switch function.
113 8 Chapter 8 Menu Description T a bles (continued) 8-5-7 USER SW GAIN 8-5-8 IRI S 8-6 MAIN OPERA TION 8-6-1 B A TTER Y/P2CARD The __ __ in the Adj ustab le Range colu mn indicates the preset m ode . Items/ Data Saved Adj ust ab le Range Remarks S.GAIN 30 dB _ • Select whether or not to enab le 30dB f or SUPER GAIN.
114 Chapter 8 Menu Description T ables (continued) 8-6-2 BA TTER Y SETTING1 The ____ i n the Adjustab le Rang e column indicates the preset m ode . Items/ Data Saved Adjustable Range Remarks CARD NEAR END ALAR M ON OFF Select whether or not to set the alarm to beep f or P2 CARD NE AR END ALARM.
115 8 Chapter 8 Menu Description T a bles (continued) <Note> The rem aini ng batt er y ca paci ty for d igi tal b att er ies is displa yed as % insi de the vie wfind er (PRO14/ TRIM14/ HYTR ON50/HYTRON1 00/HYTRON120 /DIONIC90/ DIONIC160/NP-L50/ENDURA50/ENDURA80) .
116 Chapter 8 Menu Description T ables (continued) 8-6-3 B A TTER Y SETTING2 8-6-4 M IC/A UDIO1 The ____ i n the Adjustab le Rang e column indicates the preset m ode . Items/ Data Saved Adjustable Range Remarks NiC d14 _ • Enable selection under BA TT ER Y SELECT .
117 8 Chapter 8 Menu Description T a bles (continued) 8-6-5 MIC /A UDIO2 8-6-6 TC/UB The __ __ in the Adj ustab le Range colu mn indicates the preset m ode . Items/ Data Saved Adj ust ab le Range Remarks FR ONT MIC PO WER ON OFF Select the phantom power supply f or the front microphone.
118 Chapter 8 Menu Description T ables (continued) 8-6-7 UMID SET/INFO <Note> Please re fe r to [4-5-6 Setting UM ID Inf or mation] f or the UMID inf or mation se tting. 8-7 FILE 8-7-1 SD CAR D READ/WRITE The ____ i n the Adjustab le Rang e column indicates the preset m ode .
119 8 Chapter 8 Menu Description T a bles (continued) 8-7-2 SD CARD R/W SELECT 8-7-3 LENS FILE 8-7-4 S CENE 8-7-5 I NITIALIZE The __ __ in the Adj ustab le Range colu mn indicates the preset m ode .
120 Chapter 8 Menu Description T ables (continued) 8-8 MAINTENA NCE 8-8-1 S YSTEM CHE CK 8-8-2 LE NS ADJ 8-8-3 BLA CK SHADING 8-8-4 WHITE SHADING 8-8- 5 D IA GNO ST IC1 The ____ i n the Adjustab le Rang e column indicates the preset m ode .
121 8 Chapter 8 Menu Description T a bles (continued) 8-8-6 DIA GNOSTIC2 8-8-7 HOURS METER 8-9 OPTION MENU 8-9-1 O PTION <Note> Menu opt ions for setti ng 1394 are displa yed when an IEEE1394 in terf ace board (AJ-Y AD800G, optional ) is attached .
122 Chapter 9 Specifications [General] Operating temperatur e: 0 ° C to +40 ° C (32 ° F to +104 ° F) Storage temperature: –20 ° C to +60 ° C ( –4 ° F to +1 40 ° F) Operating humidity: 10% .
123 9 Chapter 9 Specifications (continued) A udio Syst em Sampling frequenc y: 48 kHz (synchro nised with vi deo) Quantizing: 16 bits Frequenc y response: 20 Hz - 20 kHz ± 1.0 dB ( at standar d lev e l) Dynamic range: Minimum 85 dB (1 kHz, A WTD) Distor tion factor: 0.
P ANASONIC BR OADCAST & TELEVISION SYSTEMS COMP A NY UNIT COMP ANY OF P ANASONIC CORPORA TION OF NORTH AMERICA Executive Office: One Panasonic W ay 4E-7, S ecaucus, NJ 07094 ( 201) 348-7000 EASTER.
デバイスPanasonic AJ-SPC700 Pの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Panasonic AJ-SPC700 Pをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPanasonic AJ-SPC700 Pの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Panasonic AJ-SPC700 Pの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Panasonic AJ-SPC700 Pで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Panasonic AJ-SPC700 Pを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPanasonic AJ-SPC700 Pの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Panasonic AJ-SPC700 Pに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPanasonic AJ-SPC700 Pデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
