PanasonicメーカーAJ-SPD850Pの使用説明書/サービス説明書
ページ先へ移動 of 24
Panasonic Broadcast AJ-SPD850p Menu Information.
40 Setup (Initial settings) The memory card recorder ’ s main settings are performed while making selections using a system of menus. If a TV monitor has been connected to the VIDEO OUT 3 connector or SDI OUT 3 connector (optional) on the rear panel and the SUPER switch is set to [ON], the setting menus are displayed on the TV monitor.
41 Setup menus The memory card recorder can hold five user files, each of which has its own specific menu settings, and one of these files can be selected for use.
42 Setup menus (contin ued) Loading user files The contents of the USER2, USER3, USER4 or USER5 file can be copied (loaded) into the USER1 file. Also, the contents of the USER1 file can be copied (saved) into the USER2, USER3, USER4 or USER5 file.
43 Setup menus (contin ued) SYSTEM menu No./Item Description 11 SYS SC COAR. Coarse adjustment of system phase: 90 ° units Note: If setting operation is performed, the setting value does not return to factory (default) setting.
44 USER menu <B ASIC> No./Item Description 000 P-ROLL TIME This sets the preroll time. The preroll time can be set from 0 to 15 seconds in 1-second increments. 0000 0s :: 0005 5s :: 0015 15s 001 LOCAL ENA This selects the buttons which can be operated on the front panel when the REMOTE button is lit.
45 Setup menus (contin ued) USER menu <B ASIC> The underlined items indicates the initial setting. No./Item Description 008 DISPLAY SEL This selects what information is to be provided by the time code and other superimposed displays output from the VIDEO OUT 3/SDI OUT 3 connector (optional).
46 Setup menus (contin ued) USER menu <B ASIC> The underlined items indicates the initial setting. No./Item Description No./Item Description 012 SYS FORMAT This sets the memory card recorder ’ s recording and playback format. 0000 50M : DVCPRO50 (50 Mbps) is selected.
47 Setup menus (contin ued) USER menu <B ASIC> No./Item Description 05 TIME ZONE Sets the time difference from the world standard time. Refer to the table below, and select the setting which corresponds to the local time. 0000 00:00 0001 +00:30 0002 +01:00 :: 0050 – 00:30 No.
48 Setup menus (contin ued) The underlined items indicates the initial setting. No./Item Description 100 SEARCH ENA This selects the direct search dial operation. 0000 DIAL : For direct search dial operations. 0001 KEY : Operation is not transferred to the search mode unless the search button is pressed.
49 Setup menus (contin ued) No./Item Description USER menu <OPERA TION> 113 A IN SEL INH This selects whether audio input switching using the INPUT SELECT button is to be enabled or disabled. 0000 OFF : Audio input switching using the INPUT SELECT button is enabled.
50 Setup menus (contin ued) The underlined items indicates the initial setting. No./Item Description USER menu <INTERF ACE> 201 9P SEL This selects whether the REMOTE (9P) connector functions when the REMOTE button is lit. 0000 OFF : Connector does not function.
51 Setup menus (contin ued) No./Item Description USER menu <EDIT> 303 STD/NON-STD This selects STD or NON-STD in accordance with the composite input signal. 0000 AUTO : Standard/non-standard signals are automatically identified and processed. 0001 STD : Standard signals are processed.
52 Setup menus (contin ued) No./Item Description USER menu <TIME CODE> 500 VITC BLANK This selects whether to output the VITC signal at the positions selected by setup menu items No. 501 (VITC POS-1) and No. 502 (VITC POS-2). 0000 BLANK : VITC signals are not output.
53 Setup menus (contin ued) No./Item Description USER menu <TIME CODE> USER menu <VIDEO> 510 TC OUT REF This is used to switch the phase of the time code, which is output from the TIME CODE OUT connector, for the external LTC input when the TCG switch is at the “ EXT ” position.
54 No./Item Description 620 ESR MODE This selects the operation mode for edge subcarrier reduction (ESR) in the playback circuit. 0000 OFF : The mode is forcibly set to OFF. 0001 AUTO : The mode is automatically set to ON or OFF depending on the memory card recorder operation.
55 Setup menus (contin ued) The underlined items indicates the initial setting. USER menu <VIDEO> No./Item Description 622 SETUP 25 (For AJ-SPD850P) Sub-screen For setting 7.5% setup processing to be performed on input and output signals in the DVCPRO (25 Mbps) mode.
56 Setup menus (contin ued) USER menu <VIDEO> No./Item Description 660 UMID REC This selects whether or not to record the UMID information on the card. 0000 OFF : UMID information is not recorded on the card. In addition, EE output signals are blanked.
57 No./Item Description 727 PB FADE This selects the processing method for the audio edit points (IN point, OUT point) during playback etc. 0000 AUTO : The processing method accords with the status established during recording.
58 Setup menus (contin ued) No./Item Description USER menu <V BLANK> 800 ADD LINE 25 Sub-screen 00 REC LINE1 This selects the additional line where the signals are to be recorded.
59 No./Item Description Setup menus (contin ued) No./Item Description USER menu <V BLANK> 02 REC LINE3 03 REC LINE4 This selects the additional line where the signals are to be recorded. Note: This menu option is not displayed when setting “ 1 ” has been selected as the additional line mode.
60 USER menu <V BLANK> The underlined items indicates the initial setting. No./Item Description 803 TELETEXT DET [525i system] 00 REC LINE1 : 12 REC LINE13 [625i system] 00 REC LINE1 : 14 REC LINE15 This selects the lines in which the teletext signals are to be recorded.
61 Setup menus (contin ued) Number of lines which can be set for TELETEXT • When 25 Mbps is the recording/playback format. No. 800: ADD LINE 25 setting value Number of lines which can be set [525i s.
62 Setup menus (contin ued) No./Item Description USER menu <MENU> A00 LOAD This selects the user file whose contents will be loaded into USER1. 0000 USER2 : The USER2 file contents are loaded. 0001 USER3 : The USER3 file contents are loaded. 0002 USER4 : The USER4 file contents are loaded.
デバイスPanasonic AJ-SPD850Pの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Panasonic AJ-SPD850Pをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPanasonic AJ-SPD850Pの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Panasonic AJ-SPD850Pの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Panasonic AJ-SPD850Pで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Panasonic AJ-SPD850Pを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPanasonic AJ-SPD850Pの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Panasonic AJ-SPD850Pに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPanasonic AJ-SPD850Pデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
