PanasonicメーカーAK-HC1500Gの使用説明書/サービス説明書
ページ先へ移動 of 52
AK-HC1500G UL TI FORMA T DIGIT AL CAMERA SYSTEM Multi Purpose Camera AK-HC1500G Before attempting to connect, oper ate or adjust this product, please read these instructions completely .
indicates saf ety inf ormation. CA UTION RI SK O F EL EC TR I C SH OC K D O NO T OP EN CA UTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NO T REMO VE COVER (OR BA CK). NO USER SER VICEABLE P ARTS INSIDE. REFER TO SER VICING T O QUALIFIED SER VICE PERSONNEL.
- 2 (E) - ENGLISH indicates saf ety inf ormation. CA UTION: TO RE D U C E T H E R I S K O F F I RE OR S H O C K H A ZA R D A N D A N NOYI N G INTERFERENCE, USE THE RECOMMENDED A CCESSORIES ONL Y .
- 3 (E) - 1) Read these instr uctions. 2) Keep these instructions. 3) Heed all war nings. 4) Follow all instructions. 5 ) Do not use this apparatus near water . 6) Clean only with dr y cloth. 7 ) Do not bloc k any v entilation openings. Install in accordance with the manuf acturer’s instructions.
- 4 (E) - ENGLISH Information on Disposal f or Users of W aste Electrical & Electronic Equipment (private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste.
- 5 (E) - Contents Accessories Accessories .......................................... 5 Introduction ........................................... 6 Characteristics ...................................... 6 Precautions for use ...........................
- 6 (E) - ENGLISH Intr oduction Characteristics New 2/3˝ 1 million-pixel CCD is emplo yed. [1280(H) 720(V)] 1 million-pix el CCD is 2/3˝ in size , being compact and light-weight.
- 7 (E) - Do not attempt to disassemble the camera or other units. In order to prev ent electric shock, do not remov e screws or cov ers. There are no user-serviceable par ts inside. Do not abuse the camer a. A void striking, shaking, etc. The camera contains sensitive components which could be damaged by improper handling or storage.
- 8 (E) - ENGLISH Major operating contr ols and their functions .
- 9 (E) - Major operating contr ols and their functions Lens mount 2/3” standard bayonet type (B4 mount) lens is installed. Lens fixing ring knob Lens is fix ed by turning the knob clockwise .
- 10 (E) - ENGLISH HD SDI output connector [HD SDI OUT] SDI signal output is given b y this line. G/L input connector [G/L IN] F or gen-lock with the camer a, the e xternal sync signal (black b urst) or tri-lev el sync signal is supplied to this input connector .
- 11 (E) - T ally output connector [T ALL Y OUT] The R tally and G tally signals are output from this connector . These signals take eff ect when the optional card for studio applications has been inser ted.
- 12 (E) - ENGLISH Ho w to install Be sure to ask the dealer for the installation, adjustment and connection of this equipment. How to set the lens Standard 2/3” bay onet type (B4 mount) lens of any maker s can be used*. T ur n the lens fixing ring knob counterclockwise to remov e the lens mount cap.
- 13 (E) - Ho w to set up the system Configuration example 1: Connection of camera contr oller Use multi cab le supplied with AK-HRP150G f or the connection of camera controller AK-HRP150G and this unit. Bef ore connecting the cables, be sure to set the po wer s witch of AC adapter to OFF .
- 14 (E) - ENGLISH Ho w to set up the system Configuration example 2: High-Speed P/T system Cable kit A W-CAK4HIG Lens Multi purpose camera AK-HC1500G Monitor IRIS HD SDI A C adapter A W-PS505A ZO.
- 15 (E) - Operation pr ocedure 1 T urn on the power of each equipment. 2 Properl y adjust the light for the object. 3 Adjust the flange back of the lens, the iris and the focus. Flange back m ust be adjusted when the camera is used f or the first time or after replacement of the lens.
- 16 (E) - ENGLISH Ho w to adjust Flange back adjustment (f or zoom lens) The adjustment is to adjust the f ocus in all the range from the maximum z oom to the widest angle of the zoom lens . Shoot a dark object to open the iris. Adjust the distance from the object to 6.
- 17 (E) - Ho w to adjust White balance adjustment Adjust the white balance after shooting a white object by at least 50% of the screen. NO TE: If the white signal lev el is ov er 100% or less than 50%, the white balance may not be normally adjusted.
- 18 (E) - ENGLISH Black balance adjustment Adjust it with the lens closed. When the motor drive lens is controlled from the camera, adjusting the b lack balance causes the lens to be automatically closed.
- 19 (E) - Setting of menu items How to displa y the menus T wo methods are used to display the men us. Using AK-HC1500G multi purpose camera to displa y the menus: Hold do wn the MENU s witch on the rear panel of the main unit f or at least 3 seconds to displa y the TOP men u.
- 20 (E) - ENGLISH Setting of menu items DETECTION [READ Y , A CTIVE] F or automatically correcting the blac k shading. CORRECT(DIG) [OFF , ON] F or ON/OFF control of the detection correction. MAINTENANCE menu MAINTENANCE 1.BLACK SHADING 2.PEDESTAL,GAMMA 3.
- 21 (E) - Setting of menu items MAINTENANCE menu PEDESTAL,GAMMA(1/2) M PEDESTAL :+000 R PEDESTAL :+000 B PEDESTAL :+000 M GAMMA :0.45 R GAMMA :+00 B GAMMA :+00 M BLACK GAMMA :+00 R BLACK GAMMA :+00 B BLACK GAMMA :+00 GAMMA :ON BLACK GAMMA :ON M PEDEST AL [–200 to +200] F or adjusting the blac k lev el.
- 22 (E) - ENGLISH Setting of menu items B BLA CK GAMMA [–15 to +15] F or adjusting the gamma characteristics of the blue in the vicinity of the b lack in relation to the master gamma characteristics. GAMMA [OFF , ON] F or turning the gamma correction ON or OFF .
- 23 (E) - Setting of menu items R FLARE [000 to 100] G FLARE [000 to 100] B FLARE [000 to 100] F or adjusting the flare correction. FLARE [OFF , ON] F or turning the flare correction ON or OFF .
- 24 (E) - ENGLISH Setting of menu items �� KNEE,WHITE CLIP(1/2) �� M KNEE POINT :95.00% R KNEE POINT :+00.00% B KNEE POINT :+00.00% M KNEE SLOPE :50 R KNEE SLOPE :+00 B KNEE SLOPE :+00 A.KNEE POINT :95.00% A.KNEE LEVEL :108% M WHITE CLIP LVL :109% R WHITE CLIP LVL :+00% B WHITE CLIP LVL :+00% MAINTENANCE menu M KNEE POINT [80.
- 25 (E) - Setting of menu items A. KNEE POINT [80.00% to 107.00%] F or setting the auto knee break point position. This setting does not take eff ect when a setting other than A UTO is selected f or KNEE or ON is selected as the DRS setting when the VIDEO MENU has been selected or when the FILM MENU has been selected.
- 26 (E) - ENGLISH �� KNEE,WHITE CLIP(2/2) �� KNEE :MANUAL WHITE CLIP :ON HIGH COLOR :OFF Setting of menu items MAINTENANCE menu [4] KNEE, WHITE CLIP KNEE [OFF , MANU AL, A UT O] F or selecting the knee operation mode. This setting does not take eff ect when FILM REC is selected.
- 27 (E) - Setting of menu items �� DETAIL(1/2) �� DETAIL :ON TOTAL DTL LEVEL :+00 H DTL LEVEL :11 CRISP :02 LEVEL DEPENDENT :2 PEAK FREQUENCY :10 KNEE APERTURE :ON KNEE APE LEVEL :3 MAINTENANCE menu DET AIL [OFF , ON] F or turning all the detail functions ON or OFF .
- 28 (E) - ENGLISH Setting of menu items SLIM DET AIL [OFF , ON] F or setting the detail more finely at ON. DET AIL(+) [–31 to +31] F or adjusting the detail gain in the + direction. DET AIL(–) [–31 to +31] F or adjusting the detail gain in the – direction.
- 29 (E) - Setting of menu items MAINTENANCE menu �� SKIN TONE DETAIL �� SKIN TONE DTL :OFF SKIN GET :OFF SKIN DTL CORING :5 Y MAX :190 Y MIN :010 I CENTER :055 I WIDTH :090 Q WIDTH :010 Q PHASE :+000 SKIN T ONE DTL [OFF , ON] F or turning the SKIN T ONE DTL ON or OFF .
- 30 (E) - ENGLISH Setting of menu items MAINTENANCE menu [8] GAIN, AUT O IRIS �� GAIN,AUTO IRIS �� LOW GAIN :0dB MID GAIN :9dB HIGH GAIN :18dB A.
- 31 (E) - Setting of menu items MAINTENANCE menu �� S.GAIN(1/2) �� S.GAIN1 MODE :S.GAIN1 � TOTAL GAIN :42dB GAIN :30dB PIX MIX :+6dB V MIX :+6dB FRAME MIX :OFF H DETAIL LEVEL :1 CRISP :00 LEVEL DEPENDENT :5 PEAK FREQUENCY :2 These settings are perf ormed when S.
- 32 (E) - ENGLISH Setting of menu items MAINTENANCE menu [9] SUPER GAIN LEVEL DEPENDENT [0 to 15] F or removing the detail in the dark areas. The higher the number set, the wider the range in which the detail is remov ed. PEAK FREQUENCY [0 to 31] F or setting the H DTL peak frequency .
- 33 (E) - Setting of menu items MAINTENANCE menu �� FRAME MODE �� SCAN REVERSE :OFF FRAME RATE RANGE :60-6 FRAME RATE :60 SCAN REVERSE [OFF , REVERSE1 to 3] F or selecting the video output scanning method.
- 34 (E) - ENGLISH Setting of menu items MAINTENANCE menu �� MATRIX �� MATRIX TABLE :A MATRIX R-G :+00 MATRIX R-B :+00 MATRIX G-R :+00 MATRIX G-B :+00 MATRIX B-R :+00 MATRIX B-G :+00 MA TRIX T ABLE [A, B] F or selecting the table in which the matrix data is to be stored.
- 35 (E) - Setting of menu items �� COLOR CORRECTION(1/2) �� SAT PHASE R +00 +00 Mg +00 +00 B +00 +00 Cy +00 +00 G +00 +00 Yl +00 +00 �� COLOR CORRECTION(2/2) �� SAT PHASE R-Mg +00 +00.
- 36 (E) - ENGLISH Setting of menu items SETTING menu � SETTING � 1.MODE 2.SHUTTER 3.GEN-LOCK 4.PIX DEFECT 5.PROTOCOL MODE(1/2) D5600K :OFF GAIN SELECT :LOW CAM ID :BAR CAM ID POSI :1 MATRIX TABLE :OFF COLOR CORRECTION :OFF DIGITAL EXTENDER :OFF BAR SEL :FULL(16:9) FORMAT :1080/59.
- 37 (E) - Setting of menu items CAM ID POSI [0 to 3] F or selecting where the camera ID is to be displa yed. 0: top left, 1: top right, 2: bottom left, 3: bottom r ight MA TRIX T ABLE [OFF , A, B] F or selecting OFF , A or B as the matrix setting. COLOR CORRECTION [OFF , ON] F or turning the color correction function ON or OFF .
- 38 (E) - ENGLISH Setting of menu items FORMA T [720/60p, 59.94p, 50p, 1080/60i, 59.94i, 50i, 1080/30p, 29.97p, 25p, 24p, 23.98p] F or selecting the video output f ormat.
- 39 (E) - ABB OK: When the automatic blac k balance has been adjusted satisf actorily . OUT RANGE RGB: When the automatic blac k balance has not been adjusted satisf actorily . (“RGB” denotes the colors which were not balanced properly .) MENU ON B AR [OFF , ON] F or selecting whether the menu is to be displa yed with the color bars .
- 40 (E) - ENGLISH Setting of menu items SETTING menu SHUTTER SHUTTER MODE :OFF SHUTTER SPEED :1/100 SYNCHRO SCAN :60.32Hz SHUTTER MODE [OFF , ON, SYNCHRO] F or selecting the operation mode of the shutter . OFF: F or turning the shutter OFF .
- 41 (E) - Setting of menu items GEN-LOCK GEN-LOCK INPUT :BNC H PHASE-COARSE :+00 H PHASE-FINE :+000 SD HD PHASE CRS :+0 SD HD PHASE FINE :+00 SETTING menu GEN-LOCK INPUT [BNC, DSUB] F or selecting whether the sync signals are to be input from the BNC or D-SUB connector .
- 42 (E) - ENGLISH Setting of menu items PROTOCOL PROTOCOL :1 SETTING menu PRO T OCOL [1 to 4] F or selecting the remote control communication system in accordance with the system connected.
- 43 (E) - Setting of menu items CAMERA ID menu CAMERA ID ID:AK-HC1500 An ID of not more than 10 characters consisting of alphanumerics, symbols and spaces can be set f or the camera.
- 44 (E) - ENGLISH Setting of menu items FILE OPERA TION menu FILE OPERATION MODE :LOAD LOAD FROM :USER1 EXECUTE :NO FILE OPERATION MODE :STORE STORE TO :USER1 EXECUTE .
- 45 (E) - Setting of menu items TIME CODE menu TIME CODE RESET HOUR :00 MINUTE :00 SECOND :00 FRAME :00 PRESET TIME CODE is displa yed only when FILM MENU has been set and either the 720/60p or 720/59.94p f ormat has been selected. RESET F or resetting the time code to zero .
- 46 (E) - ENGLISH Setting of menu items Menu list Scene file items indicated by “ ” MAINTENANCE 1.BLACK SHADING DETECTION CORRECT(DIG) 2.
- 47 (E) - Setting of menu items Scene file items indicated by “ ” MAINTENANCE 6.DET AIL SLIM DTL DET AIL(+) DET AIL( –) DET AIL CLIP DET AIL SOURCE 7.SKIN T ONE DTL SKIN T ONE DTL SKIN GET SKIN DTL CORING Y MAX Y MIN I CENTER I WIDTH Q WIDTH Q PHASE 8.
- 48 (E) - ENGLISH Setting of menu items Scene file items indicated by “ ” MAINTENANCE 12.COLOR CORRECTION R SA T/PHASE Mg SA T/PHASE B SA T/PHASE Cy SA T/PHASE G SA T/PHASE .
- 49 (E) - 3-9/16 (90) 6-5/16 (160) 15/32 (12) 17/32 (13.2) AK-HC1500G UL TI FORMA T DIGIT AL CAMERA SYSTEM 4-5/8 (117) Appearance Unit: inch (mm).
- 50 (E) - ENGLISH Specifications Image pickup de vice: 2/3” 1 million-pix el IT , CCD 3 System: GBR image pickup system Resolving optical system: F1.4 prism Optical filter: ND; CLEAR, 1/4, 1/16, 1/64 Lens mount: Ba yonet type Output format: 1080: 60i/59.
- 51 (E) - Appendix Control cab le for inf ormation camera Connector: 17JE-23150-02(D8A6) (made by Daiichi Denshi K ogyo) Cover: DE-C8-J9-F5-1R (made by Japan A viation Electronics Industry , Ltd.) Connector: DHW10-153F200 (made by Adv anced Connectek Inc.
デバイスPanasonic AK-HC1500Gの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Panasonic AK-HC1500Gをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPanasonic AK-HC1500Gの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Panasonic AK-HC1500Gの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Panasonic AK-HC1500Gで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Panasonic AK-HC1500Gを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPanasonic AK-HC1500Gの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Panasonic AK-HC1500Gに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPanasonic AK-HC1500Gデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
