PanasonicメーカーAW-RP555Nの使用説明書/サービス説明書
ページ先へ移動 of 30
Bef ore attempting to connect, operate or adjust this product, please read these instructions completely . Multi Hybrid Contr ol P anel A W -RP555N Printed in Japan F0306Y0 D VQTB0113 ME N U IT E M YE.
2 indicates saf ety information. This class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la c lasse A est conforme à la norme NMB-003 du Canada.
3 indicates saf ety information. 1) Read these instr uctions. 2) Keep these instructions. 3) Heed all war nings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dr y cloth. 7) Do not block any ventilation openings.
4 Introduction ....................................................................... 4 Accessories ...................................................................... 4 P ar ts and their functions .................................................
5 P ar ts and their functions Contr ol panel OPERA TE lamp This lamp will come on when power is supplied to this unit and the OPERA TE s witch is on. OPERA TE switch This controls the power of all pan/tilt head systems (pan/ tilt head and conv er tible camera) connected to this unit.
6 P ar ts and their functions SHUTTER button This is used to select the shutter speed of the camera in the pan/tilt head system currently selected. Each time the button is pressed, the set shutter speed is s witched to shutter OFF or vice versa. The shutter speed is actually s witched as soon as the button is released.
7 P ar ts and their functions A WC button When the WHITE BAL [A] button or [B] b utton has been selected, press the A WC button to automatically adjust the white balance and enter the adjustment in the camera’ s memor y A or memor y B.
8 P ar ts and their functions CONTROL b uttons [1] to [5] Pressing buttons 1 to 5 will select the connected pan/tilt head system. When the A W-RC400 is connected, the b utton of the chosen number will illuminate and the video signal from the selected pan/tilt head system will be output to the A W-RC400’ s MONIT OR OUT 1 to 2 ter minals.
9 P ar ts and their functions H/F b utton This sets the heater/f an function ON or OFF when a pan/ tilt head (A W-PH600/A W -PH650) equipped with a heater/ f an function is used in the pan/tilt head system currently selected. Each time it is pressed, the function is turned ON or OFF in turn.
10 ZOOM lever This is used to adjust the lens zoom in the pan/tilt head system currently selected. Depending on the direction in which the ZOOM le ver is tilted, TELE (telephoto) or WIDE (wide angle) is set, and depending on the angle at which it is tilted, the zoom speed is adjusted.
11 P ar ts and their functions ZOOM REVERSE [NOR/REV] switch (Setting at shipment: NOR) This is used to select the lens zoom operation which is to be perf or med by operating the ZOOM le ver .
12 P ar ts and their functions GND terminal Use to ground the unit. DC12V IN terminal Connects the A W-PS505A A C adapter (sold separately). T ALL Y IN connector Connect this to the T ALL Y connector on the video s witcher or other units. When the T ALL Y connector is set to the GND le vel, the T ALL Y lamp ( ) lights.
13 P ar ts and their functions T O P AN/TIL T HEAD 1/EXT terminal • Functions as the pan/tilt head’ s connection terminal 1 when the EXT CONTROL OUT is set to OFF on the EXTERNAL CONTROL OUT setting (see page 18). Connect a 10BASE-T straight cab le (equivalent to UTP categor y 5) to the pan/tilt head’ s IP/RP ter minal.
14 Connections Use the A W -PS505A (sold separately) A C adapter f or this unit and the A W-PS300A (sold separately) f or the pan/tilt head. Use a DC power cab le (which has a nominal cross- sectional area of at least 1.
15 TALLY5 TALLY3 TALLY1 TALLY2 TALLY4 TALLY GND R 5 4 3 2 1/EXT S TALLY IN REMOTE/SERVICE TO PAN/TILT HEAD MONITOR SELECT DC12V IN GND Connections VIDEO or Pb Pr Y Zoom lens Base connector front panel.
16 TALLY5 TALLY3 TALLY1 TALLY2 TALLY4 TALLY GND R 5 4 3 2 1/EXT S TALLY IN REMOTE/SERVICE TO PAN/TILT HEAD MONITOR SELECT DC12V IN GND Connections When using the A W -PH300, A W -PH300A, A W -PH500 or the A W -PH600 pan/tilt head The control signal from this unit must be con verted from RS-422 to RS-232C.
17 TALLY5 TALLY3 TALLY1 TALLY2 TALLY4 TALLY GND R 5 4 3 2 1/EXT S TALLY IN REMOTE/SERVICE TO PAN/TILT HEAD MONITOR SELECT DC12V IN GND A C adapter: AW -PS300A Genlock signal generator System T ALL Y Pan/tilt head/camera contr ol signal 10BASE-T Switcher , special effects generator , etc.
18 Operation T urning on the power 1. Set all the power s witches of the connected components and the power s witch of the AC adapter to ON. 2. Set this unit’ s OPERA TE switch to ON. P ower will be supplied to the pan/tilt head system connected to this unit, and the camera’ s initial settings will be perf or med in sequence.
19 Operation Adjusting the minim um star t speed of the pan/tilt head When the pan/tilt head is to be operated manually using the jo ystick, its minimum start speed is automatically adjusted to ensure that the pan/tilt head will star t moving smoothly in response to the angle to which the pan/tilt le ver is tilted.
20 Operation Adjusting the minim um star t speed of the lens zoom P erform this adjustment to ensure that the lens zoom will function smoothly in response to the angle to which the zoom le v er is tilted when it is used to zoom the lens.
21 4. Set the left end position in the tra vel r ange. Operate the P AN/TIL T lev er to rotate the camera to the position which is to ser ve as the left end position. Press the PRESET 1 and 6 b uttons while holding down the MEMOR Y button. When the b utton 5 lamp lights, the setting is completed.
22 1. Select the pan/tilt head system using the CONTROL button. 2. Shoot a white object (such as a white wall or handkerchief) to fill the whole screen using the pan/tilt head system currently selected. Do not allow shin y , reflective or very bright objects to appear on the screen.
23 1. Select the pan/tilt head system using the CONTROL button. 2. Press the IRIS button to set the currently selected pan/tilt head system to the A UTO mode (the IRIS b utton’ s lamp now comes on).
24 1. Select the pan/tilt head system using the CONTROL button. 2. Use the f ollowing buttons to estab lish the modes. Press the IRIS button to estab lish the MANU mode (the IRIS button’ s lamp now goes off). If the A UTO mode is estab lished, the lens iris position will not be entered.
25 Setting pr ocedure 1. K eep pressing the MENU/ b utton f or two seconds. The menu mode is established, and the on-screen menus of the camera in the pan/tilt head system currently selected are displa yed. At this point, the MENU/ b utton lamp remains lighted.
26 Attaching the rac k mounting adapters Replacement of consumable parts T o install this unit in a rac k, use the rack mounting adapters , join-up fixture and mounting screws (M4 8 mm) supplied. Use only the mounting screws pro vided — do not use any other scre ws.
27 Ho w to change the position of the connector panel TALLY5 TALLY3 TALLY1 TALLY2 TALLY4 TALLY GND R 5 4 3 2 1/EXT S TALLY IN REMOTE/SERVICE TO PAN/TILT HEAD MONITOR SELECT DC12V IN GND TALLY5 TALLY3 .
28 TALLY5 TALLY3 TALLY1 TALLY2 TALLY4 TALLY GND R 5 4 3 2 1/EXT S TALLY IN REMOTE/SERVICE TO PAN/TILT HEAD MONITOR SELECT DC12V IN GND 1 LEVEL IRIS OPERATE CAM CONT 2 3 4 ATW ITEM DEF WIP H/F (AF) EXT.
29 P ower suppl y: DC 10.8 V to DC 16 V P ower consumption: 9.0 W General Ambient operating temperature 14°F to 122°F (–10°C to +50°C) Storage temperature –4°F to +140°F (–20°C to +60°C) Ambient operating humidity 30% to 90% (no condensation) W eight 3.
P ANASONIC BRO ADCAST & TELEVISION SYSTEMS COMP ANY UNIT COMP ANY OF P ANASONIC CORPORA TION OF NORTH AMERICA Executive Office: One P anasonic Wa y 4E-7, Secaucus, NJ 07094 (201) 348-7000 EASTERN .
デバイスPanasonic AW-RP555Nの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Panasonic AW-RP555Nをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPanasonic AW-RP555Nの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Panasonic AW-RP555Nの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Panasonic AW-RP555Nで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Panasonic AW-RP555Nを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPanasonic AW-RP555Nの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Panasonic AW-RP555Nに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPanasonic AW-RP555Nデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
