PanasonicメーカーBT-H1700Pの使用説明書/サービス説明書
ページ先へ移動 of 48
ENGLISH Model BT-H1700P Before attempting to connect, operate or adjust this product, please read thess instructions completly. Operating LCT1110-001A 1001-PN-I-U-VP VOLUME SLOT 1 A B DEGAUSS MENU SCR.
SCREEN BURN ● It is not recommended to keep a certain still image displayed on screen for a long time as well as displaying extremely bright images on screen. This may cause a burning (sticking) phenomenon on the screen of cathode-ray tube. This problem does not occur as far as displaying normal video playback motion images.
ENGLISH 3 SAFETY PRECAUTIONS ........................................................................ 2 CONTR OLS AND FEA TURES ................................................................ 4 CONTR OLS AND FEA TURES (INPUT CARD: OPTIONAL) .........
CONTROLS AND FEA TURES FRONT VIEW <Front Panel> T ally lamp Lights when the tally control signal is ON. The tally control signal is input through the MAKE remote terminal. For details, refer to Page 17. PHASE adjustment knob Adjusts picture hue.
ENGLISH REAR/SIDE VIEW <Rear Panel> COLOR OFF button/lamp Press the COLOR OFF button. The button lights and the screen becomes monochrome. When the COLOR OFF button is pressed while lit, the light goes off and the normal screen is restored. Use this function to confirm the noise in the brightness signal or to confirm the white balance.
Video input/output terminals Input (IN) and output (OUT) terminals for component (colour deference) or RGB signals. The IN and OUT terminals are bridge-connected. (When no cable is connected to the OUT terminal, the input signal is automatically terminated.
ENGLISH 䡵 SDI INPUT CARD (OPTIONAL: BT -Y A703P) AUDIO 2 AUDIO 1 OUT IN SWITCHED OUT SDI 1 SDI 2 IN IN 1 2 3 4 Output terminal for a selected component serial digital signal Output terminal for s selected digital signal (the input displayed on the screen).
PREP ARA TION 1. T urn off the Multi-Format Monitor ’ s main power and unplug the power cable from the A C outlet. 2. Unscrew the screws and remove the slot cover from the slot (on the rear side of the monitor) in which you are going to install the card.
ENGLISH BASIC MENU OPERA TIONS (MAIN MENU, SETUP MENU) 䡵 ABOUT MENU SCREENS This monitor features a MAIN MENU (main menu screen) and a SETUP MENU (setup menu screen). The MAIN MENU contains the functions normally used, and the SETUP MENU contains the settings required for initial setup.
HOW TO USE “MAIN MENU” 䡵 “ MAIN MENU ” ITEMS The following items appear in MAIN MENU. Items Functions Displays 1 APERTURE CONTROL Compensates the frequency characteristics of the input video signal. * 1 2 SLOT CONDITION Displays the status of the input cards installed in each of the input card slots.
ENGLISH 1. APERTURE CONTROL Compensates the frequency characteristics of the input video signal. Press the button to display the setting menu illustrated on the right. NOTE : APERTURE CONTROL is not displayed when the RGB signal is input. ● INPUT A/B corresponds to SLOT 1, INPUT C/D to SLOT 2, and INPUT E/F to SLOT 3.
Input Signal Format Standard Manual setting setting (MANU AL) NTSC, P AL, 480/60i, ITU601 480/60p, 576/50i, 575/50p ITU709 720/60p, 1080/50i, 1080/60i, ITU709 1035/60i, 1080/24psF <COLOR MATRIX> SELECT :MANUAL R-Y PHASE :90 R/B GAIN :0.86 G-Y PHASE :244 G/B GAIN :0.
ENGLISH HOW TO USE “SETUP MENU” 䡵 “ SETUP MENU ” ITEMS Items Functions 1 FUNCTION SETTING Displays the monitor ’ s power-up time or the total usage time. 2 PICTURE SUB ADJ. Performs approximate adjustments using the control knobs on the front panel.
HOW TO USE “SETUP MENU” (cont'd) <FUNCTION SETTING> COLOR SYSTEM :AUTO RUSH DELAY TIME :STD. HOUR METER X100h :000 EXIT: MENU ADJUST:- + SELECT: <PICTURE SUB ADJ.> CONTRAST :00 BRIGHT :00 CHROMA :00 PHASE :00 NTSC SETUP :00 COMPO.
ENGLISH <COLOR TEMP./BAL.> COLOR TEMP. :LO BLUE DRIVE :000 RED DRIVE :000 GREEN CUTOFF :000 BLUE CUTOFF :000 RED CUTOFF :000 sub menu reset EXIT: MENU ADJUST:- + SELECT: <SIZE/POSI. ADJ.> H.SIZE :00 H.POSITION :00 V.SIZE :00 V.POSITION :00 sub menu reset EXIT: MENU ADJUST:- + SELECT: 3.
<STATUS DISPLAY> STATUS DISPLAY :ON 1080/1035 :1080 EXIT: MENU ADJUST:- + SELECT: <DISTORTION ADJ.> PINCUSHION :00 PIN.BALANCE :00 PARALLELOGRAM :00 TRAPEZOID :00 sub menu reset EXIT: MENU ADJUST:- + SELECT: 5. DISTOR TION ADJ. Compensates the picture distortion.
ENGLISH HOW TO USE EXTERNAL CONTROL 䡵 ABOUT EXTERNAL CONTROL This multi-format monitor has two external control terminals. One is the MAKE terminal, which controls the monitor by connecting the terminals with many functions to the ground (GND) terminal.
HOW TO USE EXTERNAL CONTROL (cont.) 䡵 HO W T O USE THE RS-232C TERMINAL Y ou can control the monitor from your PC via the RS-232C terminal. For details on operating the monitor from the PC, consult your dealer or service centre for details.
ENGLISH Problems No power supply No picture with the power on No sound Wrong colour Unnatural picture Shaking picture Points to be checked Is the power plug loosened or disconnected? Is the signal cab.
Problems Irregular colour Wrong picture position, wrong picture size Front panel buttons and knobs do not function Points to be checked Is the monitor placed or moved close to a speaker or any other d.
ENGLISH SPECIFICA TIONS 䡲 T ype : Multi-format monitor 䡲 Picture T ube : 17" measured diagonally 䡲 Effective Screen Size : Width : 330 mm Height : 250 mm Diagonal : 410 mm 䡲 Scanning Freq.
䡵 Compliant Signal Formats of Each Input Card Input Signals BT -Y A701P BT -Y A702P BT -Y A703P BT -Y A704P NTSC (3.58 MHz) R —— — P AL (4.43 MHz) R —— — Black-and-White (50 Hz/60 Hz) R .
ENGLISH SPECIFICA TIONS (INPUT CARD: OPTIONAL) 䡵 BT -Y A701P: VIDEO INPUT CARD T ype : Video input card for multi-format monitor Inputs/Outputs : VIDEO 1/VIDEO 2: 2 lines, BNC connector x 4 (1 V (p-p), 75 Ω ) Synchronised signal (EXT .SYNC): 1 line, BNC connector x 2 (1.
SECURITY & DIGITAL IMAGING COMPANY A Division of Matsushita Electric Corporation of America Security Systems Group Executive Office: One Panasonic Way, Panazip 3E-7, Secaucus, New Jersey 07094 Eastern Zone Office: One Panasonic Way, Panazip 4E-7, Secaucus, NJ 07094 (201) 348-7303, Fax (201) 348-7372 Western Zone Office: 6550 Katella Ave.
FRANÇAIS Model BT-H1700P Il est recommandé de lire attentivement ce manuel avant d’utiliser l’appareil. Manuel LCT1111-001A 1001-PN-I-U-VP VOLUME SLOT 1 A B DEGAUSS MENU SCREENS CHECK ASPECT ARE.
BR Û LAGE D ’É CRAN ● Il n’est pas recommandé de laisser une certaine image fixe affichée sur l’écran pendant longtemps, ni d’af ficher des images très lumineuses sur l’écran. Ce qui pourrait causer un phénomène de brûlage sur l’écran du tube à rayons cathodiques.
FRAN Ç AIS 3 PR É CAUTIONS DE S É CURIT É .............................................................. 2 COMMANDES ET FONCTIONS ............................................................. 4 COMMANDES ET FONCTIONS (CARTE D ’ ENTR É E: EN OPTION) .
COMMANDES ET FONCTIONS VUE DE F A CE <Panneau avant> T é moin de signalisation (T ally) S’allume lorsque le signal de commande de signalisation est ON. Le signal de commande de signalisation est entré par la prise de télécommande MAKE. Pour des détails, se référer à la page 17.
FRAN Ç AIS <Panneau arri è re> T ouche/t é moin COLOR OFF Appuyer sur la touche COLOR OFF . La touche s ’ allume et l ’é cran devient monochrome. Lorsque la touche COLOR OFF est press é e tout en é tant allum é e, elle s ’é teint et l ’é cran normal est restitu é .
Prises d ’ entr é e/sor tie vid é o Prises d ’ entr é e (IN) et de sortie (OUT) pour signaux à composantes ou RVB. Les prises IN et OUT sont raccord é es en sonde. (Lorsqu ’ il n ’ y a pas de c â ble raccord é à la prise OUT , le signal d ’ entr é e est termin é automatiquement.
FRAN Ç AIS CAR TE D ’ ENTR É E SDI (EN OPTION: BT -Y A703P) AUDIO 2 AUDIO 1 OUT IN SWITCHED OUT SDI 1 SDI 2 IN IN 1 2 3 4 Prise de sortie pour un signal num é rique s é rie à composantes s é lectionn é Prise de sortie pour un signal num é rique s é lectionn é (l ’ entr é e est af fich é e sur l ’é cran).
PRÉP ARA TIFS 1. Couper l ’ alimentation g é n é rale du moniteur multi-format et d é brancher le cordon d ’ alimentation de la prise secteur . 2. D é visser les vis et retirer le capot de fente de la fente (sur le c ô t é arri è re du moniteur) dans laquelle vous allez installer la carte.
FRAN Ç AIS OPÉRA TIONS DE BASE DES MENUS (MENU PRINCIP AL, MENU DE RÉGLAGE) À PROPOS DES É CRANS DE MENU Ce moniteur dispose d ’ un é cran de menu principal (MAIN MENU) et d ’ un é cran de menu de r é glage (SETUP MENU).
UTILISA TION DE “MAIN MENU” POSTES DE “ MAIN MENU ” Les postes suivants apparaissent dans MAIN MENU. Postes Fonctions Affichages 1 APERTURE CONTROL Compense les caract é ristiques de fr é quence du signal vid é o entr é .
FRAN Ç AIS 1.APERTURE CONTROL Compense les caract é ristiques de fr é quence du signal vid é o entr é . Appuyer sur la touche pour afficher le menu de r é glage illustr é sur la droite. REMARQUE: APERTURE CONTROL n ’ est pas affich é lorsqu ’ un signal RVB est entr é .
Format du signal d ’ entr é eR é glage R é glage standard man uel (MANU AL) NTSC, P AL, 480/60i, ITU601 480/60p, 576/50i, 575/50p ITU709 720/60p, 1080/50i, 1080/60i, ITU709 1035/60i, 1080/24psF <COLOR MATRIX> SELECT :MANUAL R-Y PHASE :90 R/B GAIN :0.
FRAN Ç AIS UTILISA TION DE “SETUP MENU” POSTES “ SETUP MENU ” Postes Fonctions 1 FUNCTION SETTING Af fiche le retard pour la mise en marche du moniteur ou la dur é e totale d ’ utilisation. 2 PICTURE SUB ADJ. Effectue des ajustements approximatifs en utilisant les boutons de commande du panneau avant.
UTILISA TION DE “SETUP MENU” (Suite) <FUNCTION SETTING> COLOR SYSTEM :AUTO RUSH DELAY TIME :STD. HOUR METER X100h :000 EXIT: MENU ADJUST:- + SELECT: <PICTURE SUB ADJ.> CONTRAST :00 BRIGHT :00 CHROMA :00 PHASE :00 NTSC SETUP :00 COMPO.LEVEL :SMPTE sub menu reset EXIT: MENU ADJUST:- + SELECT: 1.
FRAN Ç AIS <COLOR TEMP./BAL.> COLOR TEMP. :LO BLUE DRIVE :000 RED DRIVE :000 GREEN CUTOFF :000 BLUE CUTOFF :000 RED CUTOFF :000 sub menu reset EXIT: MENU ADJUST:- + SELECT: <SIZE/POSI. ADJ.> H.SIZE :00 H.POSITION :00 V.SIZE :00 V.POSITION :00 sub menu reset EXIT: MENU ADJUST:- + SELECT: Poste : COLOR TEMP .
<STATUS DISPLAY> STATUS DISPLAY :ON 1080/1035 :1080 EXIT: MENU ADJUST:- + SELECT: <DISTORTION ADJ.> PINCUSHION :00 PIN.BALANCE :00 PARALLELOGRAM :00 TRAPEZOID :00 sub menu reset EXIT: MENU ADJUST:- + SELECT: 5. DIST ORTION ADJ . Compense la distorsion d ’ image.
FRAN Ç AIS UTILISA TION DE LA COMMANDE EXTERNE À PROPOS DE LA COMMANDE EXTERNE Ce moniteur multi-format a deux prises de commande externe. L ’ une est la prise MAKE, qui commande le moniteur en raccordant les bornes avec de nombreuses fonctions à la borne de masse (GND).
UTILISA TION DE LA COMMANDE EXTERNE (Suite) UTILISA TION DE LA PRISE RS-232C V ous pouvez commander le moniteur à partir d ’ un ordinateur personnel via la prise RS-232C. Pour des d é tails sur le fonctionnement du moniteur à partir d ’ un ordinateur personnel, consulter le revendeur ou un centre de service.
FRAN Ç AIS Probl è mes Pas d ’ alimentation Pas d ’ image avec l ’ alimentation en marche Pas de son Mauvaise couleur Image non naturelle Image tremblante Points à v é rifier La fiche d ’ .
Probl è mes Couleur irr é guli è re Mauvaise position d ’ image, mauvaise taille d ’ image Les touches et les boutons du panneau avant ne fonctionnent pas Points à v é rifier Le moniteur est-.
FRAN Ç AIS CARACTÉRISTIQUES TECHNIQUES T ype : Moniteur Multi-Format T ube image : 17" (43 cm) mesur é en diagonale T aille effective de l ’é cran : Largeur : 330 mm Hauteur : 2.
Formats de signal conformes de chaque carte d ’ entr é e Signaux d ’ entr é e BT -Y A701P BT -Y A702P BT -Y A703P BT -Y A704P NTSC (3,58 MHz) R —— — P AL (4,43 MHz) R —— — Noir e.
FRAN Ç AIS CARACTÉRISTIQUES TECHNIQUES (CAR TE D’ENTRÉE: EN OPTION) BT -Y A701P: CAR TE D ’ ENTR É E VID É O T ype : Carte d ’ entr é e vid é o pour moniteur multi-format Entr é es/sorties : VIDEO 1/VIDEO 2: 2 lignes, connecteur BNC x 4 (1 V (cc), 75 Ω ) Signal synchronis é (EXT .
Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905)624-5010.
デバイスPanasonic BT-H1700Pの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Panasonic BT-H1700Pをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPanasonic BT-H1700Pの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Panasonic BT-H1700Pの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Panasonic BT-H1700Pで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Panasonic BT-H1700Pを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPanasonic BT-H1700Pの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Panasonic BT-H1700Pに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPanasonic BT-H1700Pデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。