AsusメーカーP4P800-VMの使用説明書/サービス説明書
ページ先へ移動 of 80
Motherboard P4P800-VM User Guide.
ii Checklist Copyright © 2003 ASUST eK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, sto.
iii Features Contents Notices ............................................................................................ v Safety information .......................................................................... vi About this guide ............
iv Safeguards Contents 2.2.1 BIOS menu screen ................................................ 2-8 2.2.2 Menu bar ................................................................ 2-8 2.2.3 Navigation keys ..............................................
v Notices Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
vi Safety information Electrical safety • T o prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
vii About this guide Conventions used in this guide T o make sure that you perform certain tasks properly , take note of the following symbols used throughout this manual. Where to find more information Refer to the following sources for additional information and for product and software updates.
viii ASUS contact infor mation ASUST eK COMPUTER INC. (Asia-Pacific) Address: 150 Li-T e Road, Peitou, T aipei, T aiwan 1 12 General T el: +886-2-2894-3447 General Fax: +886-2-2894-3449 General Email: info@asus.
ix P4P800- VM specifications summar y (continued on the next page) CPU Chipset Front Side Bus (FSB) Memory VGA Expansion slots Storage Audio LAN Special features HW monitoring Rear panel I/O Socket 478 for Intel ® Pentium ® 4/Celeron with speeds up to 3.
x P4P800- VM specif ications summar y * Specifications are subject to change without notice. Internal I/O BIOS features Industry standard Manageability Power Requirement Form Factor Support CD contents 2 x USB 2.
Chapter 1 This chapter describes the features of the P4P800-VM motherboard. It includes brief descriptions of the motherboard components, and illustrations of the layout, jumper settings, and connectors.
1-2 Chapter 1: Product introduction 1 . 1 W elcome! Thank you for buying the ASUS ® P4P800-VM motherboard! The ASUS P4P800-VM motherboard delivers a host of new features and latest technologies makin.
ASUS P4P800-VM motherboard user guide 1-3 Dual-channel DDR400 memory support The motherboard supports up to 4GB of system memory using PC3200/2700/2100 non-ECC DDR DIMMs to deliver up to 6.4GB/s data transfer rate for the latest 3D graphics, multimedia, and Internet applications.
1-4 Chapter 1: Product introduction 1 .4 Motherboard com ponents Before you install the motherboard, learn about its major components and available features to facilitate the installation and future upgrades. Refer to the succeeding pages for the component descriptions.
ASUS P4P800-VM motherboard user guide 1-5 4 3 16 2 12 5 8 15 1 7 9 14 6 11 10 13 17 27 20 21 22 23 18 19 25 26 24.
1-6 Chapter 1: Product introduction A TX 12V connector . This power connector connects the 4-pin 12V plug from the A TX 12V power supply . CPU socket. A 478-pin surface mount, Zero Insertion Force (ZIF) socket for the Intel ® Pentium ® 4 Processor , with 800/ 533/400 MHz system bus that allows 6.
ASUS P4P800-VM motherboard user guide 1-7 Audio CODEC. The ADI AD1980 is an AC ’ 97 CODEC that allows 6-channel audio playback. The audio CODEC provides six DAC channels for 5.1 surround sound, S/PDIF output, AUX and Line In stereo inputs, integrated headphone amplifier , and supports greater than 90dB dynamic range.
1-8 Chapter 1: Product introduction 1 .5 Motherboard layout 24.5cm (9.6in) PCI1 P ANEL1 P4P800-VM ® CR2032 3V Lithium Cell CMOS Power CD1 AUX1 Super I/O 4Mbit Firmware Hub PS/2KBMS T : Mouse B: Ke yboard Below:Mic In Center:Line Out T op:Line In Accelerated Graphics Port (AGP1) CPU_F AN FP_AUDIO1 AD1980 CODEC USB2.
ASUS P4P800-VM motherboard user guide 1-9 1 .6 Before you proceed T ake note of the following precautions before you install motherboard components or change any motherboard settings. 1. Unplug the power cord from the wall socket before touching any component.
1-10 Chapter 1: Product introduction 1 .7 Motherboard ins tallation Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. The motherboard uses the micro-A TX form factor that measures 9 inches x 9 inches (24.
ASUS P4P800-VM motherboard user guide 1-11 1 .8 Central Processing Unit (CPU) 1.8.1 Overview The motherboard comes with a surface mount 478-pin Zero Insertion Force (ZIF) socket. The socket is designed for the Intel ® Pentium ® 4 Processor in the 478-pin package with 512KB L2 cache.
1-12 Chapter 1: Product introduction 1.8.2 Installing the CPU Follow these steps to install a CPU. 1. Locate the 478-pin ZIF socket on the motherboard.
ASUS P4P800-VM motherboard user guide 1-13 1 .9 System memor y The motherboard comes with four Double Data Rate (DDR) Dual Inline Memory Module (DIMM) sockets. These sockets support up to 4GB system memory using 184-pin unbuffered non-ECC PC3200/PC2700/PC2100 DDR DIMMs.
1-14 Chapter 1: Product introduction This motherboard supports different memory frequencies depending on the CPU FSB (Front Side Bus) and the type of DDR DIMM.
ASUS P4P800-VM motherboard user guide 1-15 T able 3 DDR400 Qualified V endor List (QVL) Obtain DDR DIMMs only from ASUS qualified vendors for better system performance. Visit the ASUS website (www .asus.com) for the latest QVL. Size V endor Model Brand Component Max.
1-16 Chapter 1: Product introduction 1. 10 Expansion slots The motherboard has three PCI slots and one Accelerated Graphics Port (AGP) slot. T o install and configure an expansion card: 1. Install an expansion card following the instructions that came with the chassis.
ASUS P4P800-VM motherboard user guide 1-17 1.10.3 PCI slots There are five 32-bit PCI slots on this motherboard. The slots support PCI cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specifications. 1.10.4 AGP slot This motherboard has an Accelerated Graphics Port (AGP) slot that supports AGP 8X (+0.
1-18 Chapter 1: Product introduction 1 . 1 1 Jumpers 1. Clear RTC RAM (CLRTC1) This jumper allows you to clear the Real T ime Clock (R TC) RAM in CMOS. Y ou can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data.
ASUS P4P800-VM motherboard user guide 1-19 2. USB device wake-up (3-pin USBPW12, USBPW34, USBPW56, USBPW78) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices.
1-20 Chapter 1: Product introduction 1 . 1 2 Connectors This section describes and illustrates the internal connectors on the motherboard. 1. Floppy disk drive connector (34-1 pin FLOPPY) This connector supports the provided floppy drive ribbon cable.
ASUS P4P800-VM motherboard user guide 1-21 3. IDE connectors (40-1 pin PRI_IDE, SEC_IDE) This connector supports the provided UltraDMA100/66 IDE ribbon cable.
1-22 Chapter 1: Product introduction 4. Serial A T A connectors (7-pin SA T A1, SA T A2) These next generation connectors support the thin Serial A T A cables for Serial A T A hard disks. The current Serial A T A interface allows up to 150 MB/s data transfer rate, faster than the standard parallel A T A with 133 MB/s (Ultra A T A/133).
ASUS P4P800-VM motherboard user guide 1-23 Required IDE Configuration settings in BIOS Refer to the following table for the appropriate BIOS settings of the above P-A T A and S-A T A device configurations. See section “ 2.3.6 IDE Configuration ” for details on the related BIOS items.
1-24 Chapter 1: Product introduction 6. SMBus connector (6-1 pin SMB1) This connector allows you to connect SMBus (System Management Bus) devices. Devices communicate with an SMBus host and/or other SMBus devices using the SMBus interface. P4P800-VM ® P4P800-VM SMBus Connector SMB1 1 SMBCLK Ground SMBDA T A +3V FLOA TING 7.
ASUS P4P800-VM motherboard user guide 1-25 8. Front panel audio connector (10-1 pin FP_AUDIO1) This is an interface for the Intel front panel audio cable that allow convenient connection and control of audio devices. By default, the pins labeled LINE OUT_R/BLINE_OUT_R and the pins LINE OUT_L/BLINE_OUT_L are shorted with jumper caps.
1-26 Chapter 1: Product introduction 10. GAME/MIDI connector (16-1 pin GAME1) This connector supports an optional GAME/MIDI module. Connect the GAME/ MIDI cable to this connector . The GAME/MIDI port on the module connects a joystick or a game pad for playing games, and MIDI devices for playing or editing audio files.
ASUS P4P800-VM motherboard user guide 1-27 12. USB header (10-1 pin USB_56, USB_78) If the USB ports on the rear panel are inadequate, two USB headers are available for additional USB ports. The USB header complies with USB 2.0 specification that supports up to 480 Mbps connection speed.
1-28 Chapter 1: Product introduction 14. Digital audio connector (4-1 pin SPDIF1) This connector is for a S/PDIF audio module that allows digital instead of analog sound output. Connect one end of the audio cable to the S/PDIF Out connector on the motherboard, and the other end to the S/PDIF module.
ASUS P4P800-VM motherboard user guide 1-29 • System W arning Speaker Lead (4-pin SPEAKER) This 4-pin connector connects to the case-mounted speaker and allows you to hear system beeps and warnings.
1-30 Chapter 1: Product introduction.
Chapter 2 This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.
2-2 Chapter 2: BIOS information 2. 1 Managing and updating your BIOS 2.1.2 Using AFUDOS to update the BIOS Update the BIOS using the AFUDOS.EXE utility in DOS environment. 1. Visit the ASUS website (www .asus.com) to download the latest BIOS file for your motherboard.
ASUS P4P800-VM motherboard user guide 2-3 4. At the DOS prompt, type the command line: afudos / i<filename.rom> where “filename.rom” means the latest (or original) BIOS file that you copied to the bootable floppy disk. The screen displays the status of the update process.
2-4 Chapter 2: BIOS information 2.1.3 Using ASUS EZ Flash to update the BIOS The ASUS EZ Flash feature allows you to easily update the BIOS without having to go through the long process of booting from a diskette and using a DOS-based utility .
ASUS P4P800-VM motherboard user guide 2-5 2.1.4 Recovering the BIOS with CrashFree BIOS 2 The CrashFree BIOS 2 auto recovery tool allows you to restore BIOS from the motherboard support CD, or from a floppy disk that contains the BIOS file, in case the current BIOS on the motherboard fails or gets corrupted.
2-6 Chapter 2: BIOS information The recovered BIOS may not be the latest BIOS version for this motherboard. Visit the ASUS website (www .asus.com) to download the latest BIOS file. If there is no floppy disk found in the drive, the system automatically checks the CD-ROM.
ASUS P4P800-VM motherboard user guide 2-7 2.2 BIOS Setup progr am This motherboard supports a programmable firmware hub (FWH) that you can update using the provided utility described in section “ 4.
2-8 Chapter 2: BIOS information Some of the navigation keys differ from one screen to another . 2.2.2 Menu bar The menu bar on top of the screen has the following main items: Main For changing the bas.
ASUS P4P800-VM motherboard user guide 2-9 2.2.4 Menu items The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items. The other items (Advanced, Power , Boot, and Exit) on the menu bar have their respective menu items.
2-10 Chapter 2: BIOS information 2.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears giving you an overview of the basic system information. 2.3.1 System Time [xx:xx:xxxx] This item allows you to set the system time. 2.3.
ASUS P4P800-VM motherboard user guide 2-11 2.3.5 Primary/Secondary/Third/Fourth IDE Master/Slave While entering Setup, BIOS auto-detects the presence of IDE devices. There is a separate sub-menu for each IDE device. Select a device item then press Enter to display the IDE device information.
2-12 Chapter 2: BIOS information DMA Mode [Auto] Selects the DMA mode. Configuration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5] SMART Monitoring [Auto] Sets the Smart Monitoring, Analysis, and Reporting T echnology .
ASUS P4P800-VM motherboard user guide 2-13 Enhanced Mode Support On [S-A T A] The default setting S-A T A allows you to use native OS on Serial A T A and Parallel A T A ports. We recommend that you do not change the default setting for better OS compatibility .
2-14 Chapter 2: BIOS information Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit AMI BIOS Version : 08.00.09 Build Date : 04/11/03 ID : PPVM1035 Processor Type : Intel(R) Pentium(R) 4 CPU 1.73GHz Speed : 1733 MHz Count : 1 System Memory Size : 256MB 2.
ASUS P4P800-VM motherboard user guide 2-15 2.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. T ake caution when changing the settings of the Advanced menu items. Incorrect field values may cause the system to malfunction.
2-16 Chapter 2: BIOS information The following sub-items appear when the item Configure DRAM Timing by SPD is set to Disabled. 2.4.2 Chipset The Chipset menu items allow you to change the advanced chipset settings. Select an item then press Enter to display the sub-menu.
ASUS P4P800-VM motherboard user guide 2-17 DRAM RAS# to CAS# Delay [4 Clocks] This item controls the latency between the DDR SDRAM active command and the read/write command.
2-18 Chapter 2: BIOS information 2.4.3 Onboard Devices Configuration Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit OnBoard AC’97 Audio [Auto] OnBoard LAN [Ena.
ASUS P4P800-VM motherboard user guide 2-19 Serial Port1 Address [3F8/IRQ4] Allows you to select the Serial Port1 base address. Configuration options: [Disabled] [3F8/IRQ4] [3E8/IRQ4] [2E8/IRQ3] Serial Port2 Address [2F8/IRQ3] Allows you to select the Serial Port2 base address.
2-20 Chapter 2: BIOS information 2.4.4 PCI PnP The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices. The menu includes setting IRQ and DMA channel resources for either PCI/PnP or legacy ISA devices, and setting the memory size block for legacy ISA devices.
ASUS P4P800-VM motherboard user guide 2-21 Allocate IRQ to PCI VGA [Y es] When set to [Y es], BIOS assigns an IRQ to PCI VGA card if the card requests for an IRQ.
2-22 Chapter 2: BIOS information 2.4.5 USB Configuration The items in this menu allows you to change the USB-related features. Select an item then press Enter to display the configuration options. Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit Module Version : 2.
ASUS P4P800-VM motherboard user guide 2-23 Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit USB Mass Storage Reset Delay [20 Sec] No USB Mass Storage device detect.
2-24 Chapter 2: BIOS information 2.5 Power menu The Power menu items allow you to change the settings for the Advanced Power Management (APM). Select an item then press Enter to display the configuration options. Suspend Mode [Auto] Repost Video on S3 Resume [No] ACPI 2.
ASUS P4P800-VM motherboard user guide 2-25 Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit Power Management/APM [Enabled] Video Power Down Mode [Suspend] Hard Dis.
2-26 Chapter 2: BIOS information Power Button Mode [On/Off] Allows the system to go into On/Off mode or suspend mode when the power button is pressed. Configuration options: [On/Off] [Suspend] Restore on AC Power Loss [Power Off] When set to Power Off, the system goes into of f state after an AC power loss.
ASUS P4P800-VM motherboard user guide 2-27 Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit CPU Temperature [44 ° C/111 ° F] MB Temperature [36 ° C/96.5 ° F] CPU Fan Speed [2250RPM] Chassis Fan Speed [XXX RPM] VCORE Voltage [1.
2-28 Chapter 2: BIOS information 2.6 Boot menu The Boot menu items allow you to change the system boot options. Select an item then press Enter to display the sub-menu. Boot Device Priority Boot Settings Configuration Security Specifies the Boot Device Priority sequence.
ASUS P4P800-VM motherboard user guide 2-29 2.6.2 Boot Settings Configuration Quick Boot [Enabled] Quiet Boot [Enabled] Add On ROM Display Mode [Force BIOS] Bootup Num-Lock [On] PS/2 Mouse Support [Aut.
2-30 Chapter 2: BIOS information Boot to OS/2 [No] Allows you to specify the OS/2 compatibility mode. Configuration options: [No] [Y es] W ait for ‘ F1 ’ If Error [Enabled] When set to Enabled, the system waits for F1 key to be pressed when error occurs.
ASUS P4P800-VM motherboard user guide 2-31 Change Supervisor Password Select this item to set or change the supervisor password. The Supervisor Password item on top of the screen shows the default Not Installed . After you have set a password, this item shows Installed .
2-32 Chapter 2: BIOS information Change User Password Select this item to set or change the user password. The User Password item on top of the screen shows the default Not Installed . After you have set a password, this item shows Installed . T o set a User Password: 1.
ASUS P4P800-VM motherboard user guide 2-33 2.7 Exit menu The Exit menu items allow you to load the optimal or failsafe default values for the BIOS items, and save or discard your changes to the BIOS items. Exit & Save Changes Exit & Discard Changes Discard Changes Load Setup Defaults Exit system setup after saving the changes.
2-34 Chapter 2: BIOS information.
Chapter 3 This chapter describes the contents of the support CD that comes with the motherboard package. Software support.
3-2 Chapter 3: Software support 3. 1 Install an oper ating system This motherboard supports Windows 98SE/ME/NT/2000/XP operating system (OS). Always install the latest OS version and corresponding updates so you can maximize the features of your hardware.
ASUS P4P800-VM motherboard user guide 3-3 3.2.2 Drivers menu The drivers menu shows the available device drivers if the system detects installed devices.
3-4 Chapter 3: Software support ASUS PC Probe This smart utility monitors the fan speed, CPU temperature, and system voltages, and alerts you on any detected problems.
ASUS P4P800-VM motherboard user guide 3-5 3.3 Sof twar e information 3.3.1 Multi-channel audio feature The ADI AD1980 AC ‘ 97 audio CODEC provides 6-channel audio capability . Install the SoundMAX Audio Driver and Application from the support CD that came with the motherboard package to activate the 6-channel audio feature.
3-6 Chapter 3: Software support Adjusting the volume settings 1. After rebooting the system, click on the volume control icon on the taskbar (lower right corner of your desktop) to display the V olume Control panel.
デバイスAsus P4P800-VMの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Asus P4P800-VMをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAsus P4P800-VMの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Asus P4P800-VMの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Asus P4P800-VMで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Asus P4P800-VMを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAsus P4P800-VMの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Asus P4P800-VMに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAsus P4P800-VMデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
