PanasonicメーカーDMCZS20Kの使用説明書/サービス説明書
ページ先へ移動 of 197
VQT4B93 M01 12KZ0 Owner ’ s Manual for advanced features Digital Camera Model No. DMC-ZS20 DMC-ZS19 Before connecting, operating or adjusting this product, please read the instructions completely .
- 2 - Contents Before use Before use .............................................. 6 About GPS DMC-ZS20 ............................... 8 Standard Accessories ........................... 9 Names and Functions of Main Parts ... 10 Cursor button ......
- 3 - Contents Using the [Setup] menu ...................... 54 [Clock Set] ................................................... 54 [Auto Clock Set] DMC-ZS20 ...................... 54 [World T ime] ................................................ 54 [T ravel Date] .
- 4 - Contents Register your own settings and record [Custom] Mode .................................... 85 [Cust.Set Mem.] .......................................... 85 [Custom] ...................................................... 86 Burst function .
- 5 - Contents GPS and map functions DMC-ZS20 Using the GPS function to record the location of a picture .......................... 128 Using the GPS function to execute positioning ................................................. 129 Executing the positioning function right away to update the current location .
- 6 - Before use ■ Camera handling Keep the camera away from excessive vibration, force, or pressure. ● Avoid using the camera under the following conditions, which may damage the lens, LCD monitor , or camera body . This may also cause the camera to malfunction or prevent recording.
- 7 - Before use ■ Always take a test shot first Before important events when you will use the camera (at weddings, for example), always take a test shot to make sure that pictures and sound record correctly .
- 8 - Before use About GPS DMC-ZS20 Y our Panasonic Lumix digital still camera is GPS-equipped which can automatically record the precise location coordinates of where the photo was taken. The specific physical address of this location can easily be derived from this information.
- 9 - Standard Accessories Check that all the accessories are supplied before using the camera. ● The accessories and their shape will differ depending on the country or area where the camera was purchased. For details on the accessories, refer to Basic Owner ’s Manual.
- 10 - Names and Functions of Main Parts ● The illustrations and screens in this manual may differ from the actual product. Mode dial ( → 25) Use this to select the recording mode.
- 1 1 - Names and Functions of Main Parts Cursor button We recommend using the supplied hand strap to avoid dropping the camera. [HDMI] socket ( → 156, 158) [A V OUT/DIGIT AL] socket ( → 15, 156, 165, 168) [EXPOSURE] button ( → 73) In the recording mode: Operate this when setting the shutter speed or aperture value.
- 12 - Names and Functions of Main Parts T ouch operations This camera’s touch screen senses pressure that is applied to the screen. T ouch T o “touch” is to press the touch screen and then pull the finger back again. Drag T o “drag” is to touch and slide your finger across the touch screen surface.
- 13 - Charging battery • Always use the dedicated AC adaptor (supplied), USB connection cable (supplied), and battery for this camera. Always charge before first use! (battery shipped uncharged) • Charge the battery while it is in the camera.
- 14 - Charging battery Inserting the battery T o charge the battery , insert it into the camera. • Set the camera ON/OFF switch to OFF Slide to the release lever to the [OPEN] position and open the card/ battery door [OPEN] [LOCK] Release lever Insert the battery all the way • Make sure to insert the battery in the correct orientation.
- 15 - Charging battery Charging the battery We recommend charging in a location where the ambient temperature is between 10 °C and 30 °C (50 °F to 86 °F) (same for the battery temperature).
- 16 - Charging battery ■ Charging lamp indications On: Charging in progress Off: Charging stops (After charging stops, disconnect the camera from the electrical outlet or your computer .) ■ Notes on charging time When using the AC adaptor (supplied) Charging time Approx.
- 17 - Charging battery Guidelines for number of recordable pictures and operating time The number of recordable pictures or available operating time may vary according to surrounding environment and usage conditions. Figures may be reduced if flash, zoom, or other functions are used frequently , or in colder climates.
- 18 - Charging battery ■ Recording motion pictures [Rec Mode] [A VCHD] [MP4] [Rec Quality] [GPH] ∗ 1 [PSH] [GFS] ∗ 1 [FSH] [FHD] A vailable recording time ∗ 2 Approx. 55 min Approx. 65 min Approx. 70 min Actual available recording time ∗ 3 Approx.
- 19 - Inserting and removing the card (optional) ● Keep the Memory Card out of reach of children to prevent swallowing. ● T o remove the card, turn the camera off and wait until the LUMIX indicator on the LCD monitor goes off. (Failure to wait may cause the camera to malfunction and may damage the card or recorded data.
- 20 - Picture save destination (cards and built-in memory) Pictures will be saved to a card if one is inserted, or to the built-in memory if not. ■ Built-in memory (approx. 12 MB) DMC-ZS20 (approx. 70 MB) DMC-ZS19 ● Y ou can store only still pictures.
- 21 - Picture save destination (cards and built-in memory) Displaying the picture recording capacity Estimated remaining pictures or recording time capacity (press [DISP .
- 22 - Picture save destination (cards and built-in memory) Recording capacity guidelines (pictures/recording time) The number of pictures you can take and the recording time vary in proportion to card capacity (and depending on recording conditions and type of card).
- 23 - Setting the clock T urn on the power The power is turned on. If the language select screen is not displayed, proceed to step . Press [MENU/SET] while the message is displayed Press to select the language, and press [MENU/SET] The [Please set the clock] message appears.
- 24 - Setting the clock Press to select [Y es] and press [MENU/SET] if automatically correcting time of day using the GPS function • T o manually set date and time → select [No]. • When you select automatic time adjustment using the GPS function, [GPS Setting] is set to [ON].
- 25 - Sequence of operations 1 T urn on the power 2 Set to 3 Set to the desired recording mode Align the mode dial correctly to the mode that you want to use. → [Intelligent Auto] Mode T ake pictures with automatic settings. ( → 31) [Program AE] Mode Record pictures with your own settings.
- 26 - Sequence of operations 4 Aim the camera and shoot ■ T aking still pictures Press the shutter button halfway to focus Press and hold the shutter button to take the picture ■ Recording motion.
- 27 - T aking pictures with your own settings [Program AE] Mode Recording mode: ● If a warning is displayed about jitter , use [Stabilizer], a tripod, or [Selftimer]. ● If aperture and shutter speed are shown in red, you do not have appropriate exposure.
- 28 - When [AF Mode] is set to (1-area-focusing), focus on the AF area in the center of the picture. If a subject you want to record is not in the center , follow the steps below .
- 29 - T ouching the screen and recording (T ouch Shutter function) This function enables you to focus and record still pictures simply by touching the subjects that appear on the screen. T ouch on the screen • The icon changes to , and you can now proceed with touch shutter recording.
- 30 - T ouching the screen and adjusting the focus and exposure (T ouch AF/AE function) This function enables the focus and exposure to be set when you touch the subject displayed on the screen. • Perform these operations with the touch shutter function ( → 29) released.
- 31 - T aking pictures with automatic settings [Intelligent Auto] Mode Recording mode: Set to ([Intelligent Auto] Mode) T ake a picture Press halfway (press lightly to focus) Press fully (press the b.
- 32 - T aking pictures with automatic settings [Intelligent Auto] Mode Automatic Scene Detection Camera reads scene when pointed at subject, and makes optimum settings automatically .
- 33 - T aking pictures with automatic settings [Intelligent Auto] Mode [Motion Deblur] The camera automatically sets the optimum shutter speed in accordance with the movements of the subject to minimize the blur of the subject.
- 34 - T aking pictures with automatic settings [Intelligent Auto] Mode [iHDR] HDR is an image processing technique that can make photos look more natural. This feature automatically combines a burst of several photos at taken different exposure levels.
- 35 - T aking pictures with automatic settings [Intelligent Auto] Mode AF T racking This function enables the camera to continue to focus on the subject and adjust the exposure of the subject even when the subject is moving. ■ With touch screen operations Perform these operations with the touch shutter function ( → 29) released.
- 36 - T aking pictures with automatic settings [Intelligent Auto] Mode [Intelligent Auto] Mode restrictions Only the menu items which are displayed in the [Intelligent Auto] Mode can be set. The settings selected in the [Program AE] or other modes will reflect on the menu items in the [Setup] menu that are not displayed.
- 37 - T aking motion pictures Recording mode: Press the motion picture button to start recording [Rec Mode] ( → 106)/[Rec Quality] ( → 107) Elapsed recording time Remaining recording time (approx.) ● Immediately release the motion picture button after pressing it.
- 38 - T aking motion pictures ■ About the recording format for recording motion pictures This unit can record motion pictures in either A VCHD or MP4 formats. A VCHD: Y ou can record high definition quality images with this format. It is suitable for viewing on a large format TV or for saving to disc.
- 39 - T aking motion pictures ■ Recording motion pictures in Records a motion picture at your preferred settings. • Aperture and shutter speed are automatically set. ■ Recording motion pictures in The camera automatically detects the scene to record motion pictures with optimal settings.
- 40 - T aking motion pictures ● If the surrounding temperature is high, or a motion picture is recorded continuously , is displayed and recording may be stopped halfway through to protect the camera. (Only when [Rec Quality] is set to [GPH] DMC-ZS20 , [PSH], [GFS] DMC-ZS20 or [FSH]) ● Use a sufficiently charged battery .
- 41 - T aking motion pictures Recording still pictures while a motion picture is being recorded Still pictures can be recorded even while a motion picture is being recorded. Press the shutter button fully during the motion picture recording Still pictures are recorded with [Aspect Ratio] setting of 16:9 and [Picture Size] setting of 3.
- 42 - V iewing your pictures [Normal Play] ● It may not be possible to view pictures on this camera that were previously edited on a computer . ● If the REC/PLA Y switch is moved from to while the power is on, the lens barrel will be retracted after approx.
- 43 - Viewing your pictures [Normal Play] Zooming in and viewing “Playback Zoom” T ouch the area that you want to magnify Each time you touch, the magnification increases through four levels after 1x, 2x, 4x, 8x, and 16x. (The picture quality displayed becomes successively lower .
- 44 - Viewing your pictures [Normal Play] Viewing pictures by their recording date “Calendar Playback” Move the zoom lever toward W side several times T ouch the recording date to be displayed, and touch [Set] to enter the date Select the month The pictures recorded on the selected date appear on the 12-picture screen.
- 45 - V iewing motion pictures This unit was designed to play motion pictures using the A VCHD, MP4 and QuickT ime Motion JPEG formats. • Slide the REC/PLA Y switch to . Select a picture with the motion picture icon, and touch Playback now starts. • Y ou can also press to play back motion pictures.
- 46 - Viewing motion pictures ● Y ou can also use the cursor button to perform playback operations. : Pause/play : Stop : Fast rewind (2 steps)/Single-frame rewind (while paused) : Fast forward (2 .
- 47 - Viewing motion pictures Capturing still pictures from motion pictures Save a scene from a motion picture as a still picture. Display the picture that you want to capture as a still picture by pausing a motion picture during playback T ouch • A confirmation screen is displayed.
- 48 - Viewing motion pictures [Video Divide] A single motion picture can be split into 2 parts. This is convenient when you want to keep just the necessary scenes, or if you wish to delete unnecessary scenes to increase free space on your card, such as when traveling.
- 49 - Deleting pictures ● Do not turn off the power during deletion. ● Use a sufficiently charged battery . ● Pictures cannot be deleted in the following cases: • Protected pictures • Card switch is in “LOCK” position. • Pictures not of DCF standard ( → 42) Press to delete displayed picture • A confirmation screen is displayed.
- 50 - Deleting pictures Press to delete displayed picture Use to select [Delete Multi]/ [Delete All] and press [MENU/SET] ● [Delete Multi] Use cursor button to select picture and press [DISP .] button Picture selected • T o cancel → Press [DISP .
- 51 - Setting the menu Press [MENU/SET] The menu selection screen is displayed. Use cursor button to select a menu, and then press [MENU/SET] • The menu type can also be selected by touch operations. Use to select the menu item, and then press [MENU/SET] Menu items Pages (The pages can also be selected with the zoom lever .
- 52 - Setting the menu Menu type [Rec] menu ( → 95) (Recording mode only) • Y ou can perform settings such as tones, Sensitivity , Aspect Ratio, and Picture Size. [Motion Picture] menu ( → 106) (Recording mode only) • Y ou can select the recording mode and picture quality and other settings.
- 53 - Setting the menu Using Quick menu During recording, you can easily call some of the menu items and set them. Press [Q.MENU] button Press to select a menu item • The menu items and setting items that are displayed differ depending on the recording mode.
- 54 - Using the [Setup] menu Item Settings, notes [Clock Set] ( → 23) Set time, date, and display format. DMC-ZS20 [Auto Clock Set] Setting the clock automatically using GPS. ( → 140) [ON] / [OFF] [World T ime] Set the local time at travel destination.
- 55 - Using the [Setup] menu Item Settings, notes [V olume] Adjust volume of sound from speakers (7 levels). [0] / [1] / [2] / [3] / [4] / [5] / [6] • Cannot be used to adjust TV speaker volume when connected to TV . [Cust.Set Mem.] Register settings on current camera.
- 56 - Using the [Setup] menu Item Settings, notes [Guide Line] Select recording information display and types of guidelines. [Rec. Info.] [ON] (Display recording information with guidelines.) [OFF] [Pattern] / : Change the patterns of guidelines. • When [Intelligent Auto] Mode has been selected, only is displayed.
- 57 - Using the [Setup] menu Item Settings, notes [Economy] T urn off the power or make the LCD monitor go dark while not using the camera to minimize battery consumption. [Sleep Mode] [2MIN.] / [5MIN.] / [10MIN.] / [OFF]: Automatically shut off power while not in use.
- 58 - Using the [Setup] menu Item Settings, notes [No.Reset] Reset picture file numbers. • The folder number is updated and the file number starts from 0001. • A folder number between 100 and 999 can be assigned. Numbers cannot be reset once folder number reaches 999.
- 59 - Using the [Setup] menu Item Settings, notes [Output] Change the settings to be used when the camera is connected to a TV or other device. [TV Aspect] (This setting performs when an A V cable (optional) is connected.
- 60 - Using the [Setup] menu Item Settings, notes [Rotate Disp.] Automatically rotate portrait still pictures. : Rotate and display pictures displayed on a TV screen as well as those displayed on the LCD monitor of the camera in portrait orientation.
- 61 - Using the [Setup] menu Item Settings, notes [Language] Change display language. Set the language displayed on the screen. [Demo Mode] View demonstration of functions.
- 62 - Changing recording information display Change between different LCD monitor displays, such as Histograms. Press [DISP .] button to change display ● In Recording Mode Recording information ∗.
- 63 - Using Zoom Recording mode: ● Adjust the focus after adjusting the zoom. ● Do not touch the lens barrel during zooming. ● The zoom ratio and the zoom bar displayed on the screen are estimates. ● The camera may make a rattling noise and vibrate when the zoom lever is operated - this is not a malfunction.
- 64 - Using Zoom Using the zoom by performing touch operations T ouch The zoom bar appears on the screen. T ouch the T or W edge of the zoom bar on the screen Fast zooming all the way to the T end ∗ Fast zooming Fast zooming all the way to the W end ∗ Slow zooming ∗ When or is touched again while zooming, zooming will stop.
- 65 - Using Zoom Zoom types and use The zoom ratio changes when the number of recording pixels is changed. ■ Optical Zoom Zooming in up to 20x is possible if pictures without have been selected by [Picture Size] on the [Rec] menu.
- 66 - T aking pictures with flash Recording mode: Press to display [Flash] Use cursor button to select the desired type and press [MENU/SET] T ype, operations Uses ∗ 1 [Auto] • Automatically judg.
- 67 - T aking pictures with flash ■ A vailable types in each mode ( ○ : Available, –: Not available, : Default setting) [Scene Mode] ○ ∗ 1 ○ ○ ○○○ – ○○○○○ – ○○ .
- 68 - T aking close-up pictures Recording mode: When you want to enlarge the subject, setting to [AF Macro] ( ) enables you to take pictures at an even closer distance than the normal focus range (up to 3 cm (0.
- 69 - T aking close-up pictures [Macro Zoom] T o take even larger images of the subject, setting to [Macro Zoom] enables the subject to appear even larger than when using [AF Macro].
- 70 - T aking pictures with self-timer Recording mode: We recommend using a tripod. This is also effective for correcting jitter when pressing the shutter button, by setting the self-timer to 2 seconds.
- 71 - Corrects the exposure when there is a backlight or when the subject is too dark or too bright. ■ Recording mode: Press to display [Exposure] Use cursor button to select a value and press [MENU/SET] • If the picture is too dark, adjust the exposure to the “+” direction.
- 72 - T aking pictures with Exposure Compensation Recording while exposure is changed automatically ([Auto Bracket]) Records 3 pictures in continuous succession while exposure is changed automatically . After exposure adjustment, the adjustment value is set as the standard.
- 73 - Determine aperture and shutter speed and record Recording mode: [Aperture-Priority] Mode When recording, you can control the aperture value to meet your recording purposes. Shutter speed is automatically adjusted to be appropriate for the set aperture value.
- 74 - Determine aperture and shutter speed and record [Manual Exposure] Mode This mode of recording lets you set any aperture value and shutter speed when exposure adjustment prevents you from recording at the desired exposure (brightness/darkness). Also, long-exposure recording of up to 15 seconds is possible.
- 75 - T aking Pictures with different picture effects [Creative Control] mode Recording mode: Y ou can select your own settings from various effects and take pictures while confirming these effects on the LCD monitor .
- 76 - T aking Pictures with different picture effects [Creative Control] mode ● A setting that was selected in [Creative Control] mode is retained even after the camera is turned off. ● Following [Rec] menu settings will be automatically adjusted and cannot be selected manually .
- 77 - T aking pictures according to the scene [Scene Mode] Recording mode: Using [Scene Mode] enables you to take pictures with optimum settings (exposure, coloring, etc.
- 78 - T aking pictures according to the scene [Scene Mode] • How to select a scene ( → 77) • Using flash in Scene Modes ( → 66) [Portrait] Improves the skin tone of subjects for a healthier appearance in bright daylight conditions.
- 79 - T aking pictures according to the scene [Scene Mode] • How to select a scene ( → 77) • Using flash in Scene Modes ( → 66) [Panorama Shot] (Continued) T ips • Pan the camera in the recording direction as steadily as possible.
- 80 - T aking pictures according to the scene [Scene Mode] • How to select a scene ( → 77) • Using flash in Scene Modes ( → 66) [Sports] T akes pictures of scenes with fast movement, e.g. sports. T ips • Stand at least 5 m (16 feet) away . Notes • Shutter speed may slow down up to 1 second.
- 81 - T aking pictures according to the scene [Scene Mode] • How to select a scene ( → 77) • Using flash in Scene Modes ( → 66) [HDR] The camera can combine several still pictures taken with different exposures into a single properly exposed picture with rich gradation.
- 82 - T aking pictures according to the scene [Scene Mode] • How to select a scene ( → 77) • Using flash in Scene Modes ( → 66) [Sunset] T akes clear pictures of scenes such as sunsets. [High Sens.] Prevents blurring of subject in dark, indoor conditions.
- 83 - T aking pictures according to the scene [Scene Mode] • How to select a scene ( → 77) • Using flash in Scene Modes ( → 66) [High Speed Video] Records rapid movements at a high speed of 220 fps.
- 84 - T aking 3D pictures [3D Photo Mode] Recording mode: Pictures are recorded continuously while moving the camera horizontally , and two pictures selected automatically are combined to make a single 3D picture. T o view 3D pictures, a television that supports 3D is required (This unit will play back in 2D).
- 85 - Registering your preferred recording mode, [Rec] menu settings, etc. to [Cust.Set Mem.] and setting the mode dial to / allows you to switch quickly to those settings.
- 86 - Register your own settings and record [Custom] Mode [Custom] Settings registered in [Cust.Set Mem.] can be quickly called up by setting the mode dial to / . ■ Recording mode: Set mode dial to / ([Custom] mode) • When set to → The camera switches to the recording mode and settings registered in .
- 87 - Burst function Recording mode: A burst of still pictures can be recorded while the shutter button is pressed fully . Select [Burst] from the [Rec] menu ( → 51) Use cursor button to select the burst setting, and press [MENU/SET] Setting Speed Description No.
- 88 - Burst function ■ Note on the picture size setting [Aspect Ratio] 4:3 5 M, 3 M, 0.3 M 2.5 M, 0.3 M 3 M 3:2 4.5 M, 2.5 M, 0.3 M 3 M, 0.3 M 2.5 M 16:9 3.5 M, 2 M, 0.2 M 3.5 M, 0.2 M 2 M 1:1 3.5 M, 2.5 M, 0.2 M 2 M, 0.2 M 2.5 M ● Pictures taken with the or setting are recorded together as a group (burst group).
- 89 - Recording with the Face Recognition function [Face Recog.] Recording mode: ■ How the Face Recognition function works During recording (When [AF Mode] is (Face Detection)) • The camera recognizes a registered face and adjusts focus and exposure.
- 90 - Recording with the Face Recognition function [Face Recog.] Registering face pictures Up to 6 people’s face pictures can be registered along with such information as name and birthdate.
- 91 - Recording with the Face Recognition function [Face Recog.] Editing or deleting information about registered persons Information about registered people can be edited or deleted.
- 92 - Useful features for travel [T ravel Date] • For [Setup] menu setting procedures ( → 51) If you set your travel schedule and record pictures, the day of your trip on which the picture was taken will be recorded. ■ Recording mode: ∗ ∗ Recording only .
- 93 - Useful features for travel [World T ime] • For [Setup] menu setting procedures ( → 51) Set the recording date and time with the local time at your destination. ■ Recording mode: Select [World T ime] from the [Setup] menu ( → 51) • Message will be displayed when setting for the first time.
- 94 - Entering T ext Use the cursor button to enter names with the Face Recognition function and in Scene Modes [Baby] and [Pet], or to register locations in [T ravel Date] etc. Use cursor button to select characters Press [MENU/SET] several times until the desired character is displayed Cursor position T ext is inserted at the cursor position.
- 95 - Using the [Rec] menu [Aspect Ratio] • For [Rec] menu setting procedures ( → 51) Aspect ratio of still picture can be changed according to printing or playback format. ■ Recording mode: ■ Settings: / / / ● Edges may be cut off when printing – be sure to check in advance.
- 96 - Using the [Rec] menu [Quality] • For [Rec] menu setting procedures ( → 51) Set quality of picture. ■ Recording mode: ■ Settings: ([Fine]) High quality , priority to picture quality ([Standard]) Standard quality , priority to the number of pictures ● The setting is fixed to , in [High Sens.
- 97 - Using the [Rec] menu [White Balance] • For [Rec] menu setting procedures ( → 51) Adjust coloring to suit light source if colors otherwise appear unnatural.
- 98 - Using the [Rec] menu ■ Setting White Balance manually ( ) Select and press [MENU/SET] Point the camera towards a white object (e.g. paper) and press [MENU/SET] White Balance is set to . • Even if the camera’s power is OFF , the set White Balance is remembered.
- 99 - Using the [Rec] menu [AF Mode] • For [Rec] menu setting procedures ( → 51) Method of aligning focus can be changed according to position and number of subjects. ■ Recording mode: ■ Settings: / / / / T aking front-on pictures of people (Face Detection) Recognizes faces (up to 15 people) and adjusts exposure and focus accordingly .
- 100 - Using the [Rec] menu ● Focus is fixed to (1-area-focusing) in the following cases: • [High Speed Video] scene mode • [Miniature Effect] in [Creative Control] mode ● Use (1-area-focusing) if focus is difficult to align with (Spot-focusing).
- 101 - Using the [Rec] menu [Face Recog.] • For [Rec] menu setting procedures ( → 51) For details ( → 89). [Metering Mode] • For [Rec] menu setting procedures ( → 51) Y ou can change the position for measuring brightness when correcting exposure.
- 102 - Using the [Rec] menu [Min. Shtr Speed] • For [Rec] menu setting procedures ( → 51) Sets shutter speed to minimum. We recommend using slower shutter speeds to take brighter pictures in dark locations.
- 103 - Using the [Rec] menu [Burst] • For [Rec] menu setting procedures ( → 51) For details ( → 87). [Color Mode] • For [Rec] menu setting procedures ( → 51) Set color effects.
- 104 - Using the [Rec] menu [Red-Eye Removal] • For [Rec] menu setting procedures ( → 51) Automatically detects red-eye and corrects still picture data when recording with flash red-eye reduction ( ). ■ Recording mode: ■ Settings: [ON] / [OFF] ● This setting will work only when [AF Mode] is (Face Detection).
- 105 - Using the [Rec] menu [Date Stamp] • For [Rec] menu setting procedures ( → 51) Still pictures can be taken with the recording date and time stamped on the still picture. ■ Recording mode: ■ Settings: [W/O TIME] / [WITH TIME] / [OFF] ● Date stamps on still pictures cannot be erased.
- 106 - Using the [Motion Picture] menu [Rec Mode] • For [Motion Picture] menu setting procedures ( → 51) Sets the data format of the motion picture that is recorded. ■ Recording mode: ■ Settings: [A VCHD] • This is a data format suitable for playback on high-definition TVs.
- 107 - Using the [Motion Picture] menu [Rec Quality] • For [Motion Picture] menu setting procedures ( → 51) Sets the picture quality of the motion picture that is recorded. ■ Recording mode: ■ Settings: [A VCHD] in [Rec Mode] DMC-ZS20 Item Picture size/Bit rate fps [Aspect Ratio] [GPH] 1920×1080 pixels/Approx.
- 108 - Using the [Motion Picture] menu [Continuous AF] • For [Motion Picture] menu setting procedures ( → 51) Either allow the focus to be constantly adjusted during motion picture recording, or fix the focus position at the start of recording.
- 109 - Playing back still pictures recorded using the burst function Pictures taken with the or setting are recorded together as a group (burst group). ■ Representative picture display A representative picture (first burst picture) is displayed when it is displayed together with other still pictures or with motion pictures.
- 1 10 - Playing back still pictures recorded using the burst function ● [Playback] menu items cannot be used while the display appears within each burst group. ● Burst pictures cannot be displayed as a burst group during [GPS Area Play] DMC-ZS20 or [Favorite] playback with [Slide Show] or [Filtering Play].
- 1 1 1 - Different playback methods [Playback Mode] Recorded pictures can be played back in a variety of ways. Press [MENU/SET] in playback mode The menu selection screen is displayed. Use cursor button to select [Playback Mode] menu and press [MENU/SET] • The menu type can also be selected by touch operations.
- 1 12 - Different playback methods [Playback Mode] [Slide Show] • For switching [Playback Mode] ( → 111 ) Automatically play pictures in order and to music. Recommended when viewing on TV screen. Use cursor button to select the playback method and press [MENU/SET] [All] Play all.
- 1 13 - Different playback methods [Playback Mode] ■ Operations during Slide Show The operation guide appears on the bottom right of the LCD monitor . • If you do not perform any operation for approx. 2 seconds, the operation guide is turned off.
- 1 14 - Different playback methods [Playback Mode] [Filtering Play] • For switching [Playback Mode] ( → 111 ) Y ou can refine the selection of pictures to be viewed by narrowing them down to pictures in selected categories or to favorite pictures, and then view those pictures.
- 1 15 - Retouching pictures [Auto Retouch] Y ou can adjust the color and brightness of a still picture to bring them into balance. • New pictures are created after editing pictures with [Auto Retouch]. Before starting to edit, make sure that there is enough free space in the built-in memory or memory card.
- 1 16 - Retouching pictures [Creative Retouch] Y ou can retouch recorded still pictures by selecting the effect that you want to apply . • New pictures are created after editing pictures with [Creative Retouch]. Before starting to edit, make sure that there is enough free space in the built-in memory or memory card.
- 1 17 - Using the [Playback] menu Y ou can set the recorded picture to upload to the image-sharing websites, edit the picture (for example, trimming), and set a protection setting in the picture. • For [Playback] menu display and operation methods ( → 51) • Depending on the [Playback Mode], some [Playback] menu items are not displayed.
- 1 18 - Using the [Playback] menu ■ Uploading to image-sharing websites When setting [Upload Set], the built-in uploading tool automatically makes copies on the card inside the camera. Connect the camera to your computer ( → 165) before performing uploading operations.
- 1 19 - Using the [Playback] menu [T ext Stamp] • For [Playback] menu display and operation methods ( → 51). The recording date and time, location name information and the text registered in the [Baby], [Pet] Scene Modes, [T ravel Date] and [Title Edit] are stamped on the still picture.
- 120 - Using the [Playback] menu ■ Items that can be stamped [Shooting Date] [W/O TIME]: Stamp recording date [WITH TIME]: Stamp recording date and time [Name] : Stamp name registered in Face Recog.
- 121 - Using the [Playback] menu [Resize] • For [Playback] menu display and operation methods ( → 51). Picture size can be reduced to facilitate e-mail attachment and use in web pages, etc. (Still pictures recorded at the smallest recording pixel level cannot be further reduced.
- 122 - Using the [Playback] menu [Cropping] • For [Playback] menu display and operation methods ( → 51). Enlarge your still pictures and crop unwanted areas. Use cursor button to select a still picture, and then press [MENU/SET] Select area to crop and press [MENU/SET] Expand Change position • Confirmation screen is displayed.
- 123 - Using the [Playback] menu [Favorite] • For [Playback] menu display and operation methods ( → 51). By labeling your favorite pictures with a star ( ), you can play back your favorite pictures only , or you can delete all pictures except your favorites.
- 124 - Using the [Playback] menu [Print Set] • For [Playback] menu display and operation methods ( → 51). Picture/picture no./date printing settings can be made for when printing with DPOF print- compatible shops or printers. (Ask at the shop to check for compatibility .
- 125 - Using the [Playback] menu [Protect] • For [Playback] menu display and operation methods ( → 51). Set protection to disable picture deletion.
- 126 - Using the [Playback] menu [Face Rec Edit] • For [Playback] menu display and operation methods ( → 51). Edit or delete the recognition information for pictures with mistaken Face Recognition.
- 127 - Using the [Playback] menu [Copy] • For [Playback] menu display and operation methods ( → 51). Y ou can copy pictures between built-in memory and memory card. Use cursor button to select the copy method (direction) and press [MENU/SET] : Copy all pictures from built-in memory to card (go to step ).
- 128 - Using the GPS function to record the location of a picture DMC-ZS20 Before using the GPS function, read “About GPS” ( → 8) and “License Agreement for Place Name and Map Data” ( → 190). GPS stands for Global Positioning System. Y ou can check your current location using GPS satellites.
- 129 - Using the GPS function to record the location of a picture DMC-ZS20 Using the GPS function to execute positioning When [GPS Setting] is [ON], the camera periodically receives radio signals from the GPS satellites and executes positioning.
- 130 - Using the GPS function to record the location of a picture DMC-ZS20 ■ Displaying the status and result of positioning The icons that indicate the status and result of positioning will appear on the LCD monitor .
- 131 - Using the GPS function to record the location of a picture DMC-ZS20 ■ Information to be recorded on the pictures When the camera successfully executes positioning, it records the following information in still pictures and motion pictures ∗ (except for the picture quality settings of [PSH], [FSH], and [SH]).
- 132 - Using the GPS function to record the location of a picture DMC-ZS20 Executing the positioning function right away to update the current location If the displayed place name is different from the current location or a previous location is displayed, update the positioning information.
- 133 - Using the GPS function to record the location of a picture DMC-ZS20 ■ Interval between positioning operations Even if the positioning information is not updated, the camera automatically tries to execute positioning immediately after it is turned on and subsequently at regular intervals when [GPS Setting] is [ON].
- 134 - Using the GPS function to record the location of a picture DMC-ZS20 Changing place name information to be displayed Y ou can change the recorded place name information items to be displayed on the screen. Press [MENU/SET] Use cursor button to select [GPS] menu and press [MENU/SET] Use cursor button to select [Area Info.
- 135 - Using the GPS function to record the location of a picture DMC-ZS20 Disabling the positioning function when the camera is turned off When [GPS Setting] is [ON], the GPS function remains activated even if the camera is turned off. T o disable the positioning function when the camera is turned off, set [Airplane Mode] to [ON].
- 136 - Changing the place name information to be recorded DMC-ZS20 When there are other candidate locations as a result of positioning, you can change the location information to another place name or landmark in the neighborhood. • When there is a choice for differing place name information, appears in front of the place name information.
- 137 - Changing the recorded GPS information DMC-ZS20 [Edit Location] Y ou can edit the location information (latitude and longitude) recorded on still pictures and motion pictures.
- 138 - Changing the recorded GPS information DMC-ZS20 ■ Specifying the location from the map Use cursor button to select [Point on map] and press [MENU/SET] Move the map to a new location that you want to record on the picture and press [MENU/SET] • About map operation ( → 146) • A confirmation screen will appear .
- 139 - Changing the recorded GPS information DMC-ZS20 [Edit Place Name] Y ou can edit a place name or landmark name recorded in a picture. Press [MENU/SET] Use cursor button to select [Playback] menu.
- 140 - Adjusting the time using GPS DMC-ZS20 Y ou can automatically update the [Clock Set] of the camera using the date and time information contained in GPS radio signals. When you move to a different time zone from your home area and positioning is executed successfully , the camera automatically adjusts the time to the local time.
- 141 - Reducing the time required for positioning DMC-ZS20 This camera is equipped with a feature that can reduce the time required to receive GPS satellites when the camera is first turned on. Using your PC and an Internet connection, the GPS assist data is downloaded and saved to your camera.
- 142 - Reducing the time required for positioning DMC-ZS20 Using the “GPS Assist T ool” ■ Using “GPS Assist T ool” by connecting the camera and computer Preparation: Turn on the computer and close all other open application programs.
- 143 - Reducing the time required for positioning DMC-ZS20 ■ Using a card reader/writer (commercially available) Preparation: • T urn on the computer that is connected to a card reader/writer (commercially available) and close all other open application programs.
- 144 - Reducing the time required for positioning DMC-ZS20 Updating the GPS assist data Start up the “GPS Assist T ool” on the computer ■ Windows Double-click [GPSASIST .EXE] stored in the connected camera or memory card The “GPS Assist T ool” will start up.
- 145 - Reducing the time required for positioning DMC-ZS20 Checking the expiration date of the GPS assist data The GPS assist data expires in 30 days.
- 146 - Using the map function DMC-ZS20 Y ou can display a map showing the location where a picture was taken or your current location. ● If you copy the map data stored on the supplied DVD to a memory card, you can display more detailed maps.
- 147 - Using the map function DMC-ZS20 Displaying your current location on a map When positioning is executed successfully using GPS, you can display your current location on a map.
- 148 - Using the map function DMC-ZS20 Displaying only pictures taken in the same area Y ou can select the area of a picture on a map to narrow down the pictures to be displayed.
- 149 - Using the map function DMC-ZS20 Displaying a map by selecting a country or region Y ou can select a place name that you want to display and show it on a map.
- 150 - Using the map data on the DVD (supplied) DMC-ZS20 Y ou can use “LUMIX Map T ool” to copy the map data on the DVD (supplied) to a memory card. When the map data is copied to the memory card, detailed maps can be displayed on the camera. The DVD disc supplied with your camera contains more detailed map data and the software to install it.
- 151 - Using the map data on the DVD (supplied) DMC-ZS20 Copying the map data to a memory card Preparation: • Install “LUMIX Map T ool” on your computer before starting the copying procedure. ( → 150) • T urn on the computer and close all other open application programs.
- 152 - Using the map data on the DVD (supplied) DMC-ZS20 ■ Copying map data directly to a memory card in the camera from the computer instead of a card reader/writer (commercially available) Y ou can copy the map data to a memory card inserted in the camera by connecting the camera to a computer using the supplied USB connection cable.
- 153 - Registering my landmark DMC-ZS20 Y ou can register a user-defined location that is not registered in this camera as my landmark in order to display it when positioning is executed or to record it on a picture. (Up to 50 landmarks) ● Unless the map data is copied to a memory card, My landmark cannot be registered.
- 154 - Registering my landmark DMC-ZS20 Registering the recording location as my landmark Y ou can use the location information of a picture to register it as My landmark.
- 155 - Registering my landmark DMC-ZS20 Selecting My landmark and displaying it on a map Y ou can display a map by moving the registered My landmark to the center .
- 156 - V iewing on TV screen Y ou can view pictures on a TV screen by connecting your camera to your TV with the HDMI mini cable (optional) or A V cable (optional). ● Also consult TV operating manual. Preparation: • Set [Output] to connect your camera to a TV using the A V cable (optional) ( → 59) • T urn off both camera and TV .
- 157 - Viewing on TV screen ■ T o connect with an HDMI mini cable (optional) ● Always use a genuine Panasonic HDMI mini cable (optional). ● Some of the playback functions cannot be performed. ● [Playback], [GPS] DMC-ZS20 , [Map] DMC-ZS20 , and [Setup] menus cannot be used.
- 158 - Viewing on TV screen VIERA Link (HDMI) (HDA VI Control™) What is VIERA Link (HDMI)? ● VIERA Link™ is a new name for EZ Sync™. ● VIERA Link is a function that automatically links this camera to VIERA Link- compatible devices by connecting HDMI mini cables (optional) for enabling easy operation with the VIERA remote control.
- 159 - Viewing on TV screen Preparation: Set [VIERA Link] to [ON] ( → 59). Connect the camera to a VIERA Link (HDMI)-compatible Panasonic television (VIERA) with an HDMI mini cable (optional) ( →.
- 160 - Viewing on TV screen Viewing 3D still pictures If you connect this camera to a 3D-capable TV , and play back still pictures that you recorded in 3D, you can enjoy impressive 3D still pictures on the TV . If a 3D-capable TV has an SD card slot, you can play back 3D still pictures that you recorded by inserting the card into the slot.
- 161 - Viewing on TV screen ● On the LCD monitor of this camera, 3D still pictures will be played back in 2D (conventional pictures). ● If you switch between 3D still pictures and normal still pictures while playing back pictures, a black screen will be displayed for a few seconds.
- 162 - Keep the recorded still pictures and motion pictures The methods for copying still and motion pictures recorded with this camera to other devices vary according to the file format (JPEG, MPO, A VCHD, MP4, Motion JPEG). Follow the correct method for your device.
- 163 - Keep the recorded still pictures and motion pictures Use “PHOTOfunSTUDIO” to copy to your computer Using the “PHOTOfunSTUDIO” software on the supplied disc, you can save still pictures and motion pictures recorded with this camera in all file formats to a computer .
- 164 - Using with your PC Still/motion pictures can be copied from the camera to your computer by connecting the two together . • Some computers can read directly from the camera’s memory card.
- 165 - Using with your PC Connect camera to computer • Please make sure you use the supplied USB connection cable. Use of cables other than the supplied USB connection cable may cause malfunction.
- 166 - Using with your PC ∗ 1 New folders are created in the following cases: • When pictures are taken to folders containing files numbered 999. • When using cards already containing the same folder number (for example, pictures taken with other cameras, etc.
- 167 - Using with your PC Uploading pictures to image-sharing websites Using the uploading tool ([LUMIX Image Uploader]), you can upload still pictures and motion pictures to image-sharing websites (Facebook or Y ouTube). There is no need to copy pictures to your computer or install specialized software.
- 168 - Printing Preparation: • Charge the battery sufficiently . • When printing pictures from the built-in memory , remove any memory cards. • Adjust the print quality or other settings on your printer , as needed. • T urn on the camera and printer.
- 169 - Printing ● Do not use any other USB connection cables except the supplied one. ● Disconnect USB connection cable after printing. ● T urn off power before inserting or removing memory cards. ● When the battery begins to run out during communication, a warning beep sounds.
- 170 - Printing Printing multiple pictures Use cursor button to select [Multi Print] in step ( → 168) Use cursor button to select item and press [MENU/SET] • [Multi Select] : Scroll between pictures with cursor button, select pictures to print with the [DISP .
- 171 - Printing Making print settings on the camera Make settings before selecting [Print start]. Use cursor button to select the item and press [MENU/SET] Item Settings [Print with Date] [ON] / [OFF] [Num.of prints] Set number of pictures (up to 999 pictures) [Paper Size] When is selected, the printer settings take priority .
- 172 - List of LCD monitor displays Screens shown here are only examples. The actual display may vary . • Press the [DISP .] button to change display .
- 173 - List of LCD monitor displays ∗ 1 XXhXXmXXs, RXXhXXmXXs [h], [m] and [s] indicate “hour”, “minute” and “second”. ∗ 2 • The displaying is performed in the following priority order: location name information, travel destination, name ([Baby]/[Pet]), and name ([Face Recog.
- 174 - List of LCD monitor displays Screens shown here are only examples. The actual display may vary . • Press the [DISP .] button to change display .
- 175 - List of LCD monitor displays Screens shown here are only examples. The actual display may vary . • Press the [DISP .] button to change display .
- 176 - Message displays Meanings of and required responses to major messages displayed on LCD monitor . [This memory card cannot be used] ● A MultiMediaCard was inserted. → Not compatible with the camera. Use a compatible card. [Some pictures cannot be deleted] [This picture cannot be deleted] ● Non-DCF pictures ( → 42) cannot be deleted.
- 177 - Message displays [Memory card parameter error] ● Card is not of SD standard. ● When cards in capacities of 4 GB or more are used, only SDHC or SDXC Memory Cards are supported. [Read Error] / [Write Error] [Please check the card] ● Data read has failed.
- 178 - Q&A T roubleshooting T ry checking these items ( → 178 - 185) first. If the problem persists, performing [Reset] in the [Setup] menu may resolve the issue ( → 58). (Note that except for some items such as [Clock Set], all settings are returned to their values at the time of purchase.
- 179 - Q&A T roubleshooting GPS (continued) DMC-ZS20 Positioning takes time. ● When using the camera for the first time or after not using it for a while, positioning may take several minutes.
- 180 - Q&A T roubleshooting Recording (continued) Focus not aligned correctly . ● Not set to mode appropriate for distance to subject. (Focus range varies according to recording mode.) ● Subject outside of focus range. ( → 68) ● Caused by jitter or subject movement.
- 181 - Q&A T roubleshooting Recording (continued) Panorama picture recording stops before finishing. ● If the pan motion of the camera is too slow , the camera assumes that the operation has been aborted and stops recording.
- 182 - Q&A T roubleshooting Playback Pictures have been rotated. ● [Rotate Disp.] is activated ( → 60) Cannot view pictures. There are no recorded pictures. ● REC/PLA Y switch is not set to (play). ● No pictures in built-in memory or card (pictures played from card if inserted, from built-in memory if not).
- 183 - Q&A T roubleshooting TV , computer , printer No image appears on TV . Image blurred or not colored. ● Not connected correctly ( → 156). ● The television has not been switched to auxiliary input. TV screen display different to LCD monitor .
- 184 - Q&A T roubleshooting TV , computer , printer (continued) Cannot print when connecting to printer . ● Printer not compatible with PictBridge. ● Set [USB Mode] to [PictBridge(PTP)] ( → 58). The edges of pictures are cut off when printing.
- 185 - Q&A T roubleshooting Others Menu not displayed in desired language. ● Change [Language] setting ( → 61). Camera rattles if shaken. ● This sound is made by the lens movement and is not a fault. Red lamp illuminated when pressing shutter button halfway in dark locations.
- 186 - Usage cautions and notes When in use ● Camera may become warm if used for long periods of time, but this is not a fault. ● Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.
- 187 - Usage cautions and notes Memory cards ● T o prevent damage to cards and data • Avoid high temperatures, direct sunlight, electromagnetic waves, and static electricity . • Do not bend, drop, or expose to strong impacts. • Do not touch terminals on reverse of card or allow them to become dirty or wet.
- 188 - Usage cautions and notes About AC adaptor (supplied) ● Keep at least 1 m (3.3 feet) away from AM radio (may cause radio interference). ● The AC adaptor (supplied) may generate whirring sounds when it is being used. This is not a malfunction.
- 189 - Usage cautions and notes Personal Information If names or birthdays are set in [Baby] Mode or in the [Face Recog.] function, keep in mind that the camera and recorded pictures will contain personal information.
- 190 - Usage cautions and notes DMC-ZS20 Important! Be sure to read the following before using the location names that are stored in this product. License Agreement for Place Name and Map Data Personal Use Only .
- 191 - Usage cautions and notes DMC-ZS20 No W arranty . This Data is provided to you “as is,” and you agree to use it at your own risk. Panasonic Corporation and its licensors (and their licensor.
- 192 - Usage cautions and notes DMC-ZS20 Export Control. Panasonic Corporation shall not export from anywhere any part of the Data or any direct product thereof except in compliance with, and with al.
- 193 - Usage cautions and notes DMC-ZS20 Notices related to licensed software copyright holders © 201 1 NA VTEQ. All rights reserved. “MAPPLE” is a trademark of Shobunsha Publications, Inc.
- 194 - Usage cautions and notes DMC-ZS20 T erritory Notice Australia © Hema Maps Pty . Ltd, 201 1. Copyright. Based on data provided under license from PSMA Australia Limited (www .
- 195 - Usage cautions and notes DMC-ZS20 T erritory Notice Sri Lanka This product incorporates original source digital data obtained from the Survey Department of Sri Lanka © 2009 Survey Department .
- 196 - Usage cautions and notes DMC-ZS20 ■ Landmark types Although approx. 1,000,000 landmarks are registered in the built-in memory , there are also some unregistered landmarks. (The registered information is current as of December 201 1 and will not be updated.
• HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
デバイスPanasonic DMCZS20Kの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Panasonic DMCZS20Kをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPanasonic DMCZS20Kの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Panasonic DMCZS20Kの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Panasonic DMCZS20Kで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Panasonic DMCZS20Kを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPanasonic DMCZS20Kの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Panasonic DMCZS20Kに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPanasonic DMCZS20Kデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。