Accton TechnologyメーカーWA-5001の使用説明書/サービス説明書
ページ先へ移動 of 42
Cheetah Wireless TM 802.11a Access Point - W A5001 Quick Installation Guide.
.
Quick Installation Guide Cheet ah Wireless TM 802.1 1a Access Point 802.1 1a Wireles s Access Point with 1 10/100Mbps (RJ-45) LAN Por t.
Accton is a trademark of Accton T e chnology Corporation. Othe r tra demarks or brand names mentioned herein are trademarks or registe red trademarks of their respective comp anies. International Headquarters No. 1 Creation Road III , Science-based Industrial Park Hsinchu 300, Taiwan, R.
i Accton T echnology Corporation Limited W arr anty: Accton warrant s all is product s to be free of manufactu ring defects i n workmanship and materials, unde r normal use and service, for the applicable warranty term. All Accton product s carry a standard 90-day limit ed warranty from the date of purchase from Accton or its Authorized Reseller .
Limited Warranty ii W ARRANTIES EXCLUSIVE: IF AN ACCTON PRODUCT DOES NO T OPERA TE AS W ARRANTED ABO VE, CUSTOMER'S SOLE REMEDY SHALL BE REP A IR OR REPLACEMENT OF T HE PRODUCT I N QUESTION, A T ACCTON’S OPTION. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER .
iii Contents Introduction 1 Package Checklist 1 System Requirements 1 Hardware Description 2 Ethernet Compatibility 2 Radio Characteristics 2 LED Indicators 2 Applications 3 Hardware Instal lation 4 S.
Contents iv Network Configurat ion and Planning 24 Network Topologies 24 Ad Hoc Wireless LAN (no AP or Bridge) 24 Infrastructure Wireless LAN 25 Infrastructure Wireless LAN for Roaming Wi reless PCs 2.
1 Introduction Accton’ s Cheetah Wireless 802.11a Access P oint (W A5001) provides tr ansparent, wireless high speed data communications for portable or mobile devices equipped with an 802.
Quick Installation Guide 2 Hardware Description Ethernet Compatibility Accton’ s Wireless Ac cess P oint can attach directly to 10BASE-T/100BASE-TX (twisted-pair) Ethernet LAN segments.
Applications 3 Applications The Cheetah Wireless products offer a high s peed, reliable , cost-effectiv e solution f or 10/100 Mbps wireless Ether net client access t o the network in applications suc.
Quick Installation Guide 4 Hardware Installation Figure 2. Top Panel 1. Select the Site – Choose a proper place for y our W A5001 Wireless Access P oint. In general, the best location is at the center of your wireless cov erage area, within line of sight of all wireless devices .
Hardware Installati on 5 4. Connect the Power Cable – Connect the pow er adapter cable to the 3.3 V DC power sock et on the rear panel. Warning: USE ONLY the power adapter supplied with the WA5001. Otherwise, the product may be damaged. The CD-ROM that comes with the package cont ains a utility program f or the access point.
Quick Installation Guide 6 Software Installati on and Configuration Windows Installation ( 98/Me/NT/2000/XP) 1. Inser t the CD-ROM that comes with the package into the CD-R OM drive on your PC , and then enter the following command: D:utilitysetup . F ollow the on-screen instructions to install the utility program.
Setup Wizard 7 Setup Wizard 1. T o view the access point’s management interf ace, enter the user name Admin, with a pass word 5up , and click LOGIN. 2. The home page displays the Main Menu on the screen. 3. Click on Setup Wizard to displa y basic configurations including SSID , Channel, Authentication T ype and Standard WEP Setup.
Quick Installation Guide 8 4. Click on the Ne xt button to star t using the 1-2-3 Setup Wizard. SSID – The Ser vice Set ID . This should be set to the same value as other wireless devices in y our network. (Default: ANY) Note: The SSID is case sensitive and can consis t of up to 32 alphanumeric characters.
Setup Wizard 9 Channel – Y ou can select Enable to set the access point to operate in turbo mode with a data rate of up to 72 Mbps. (Def ault: Disable) Authentication T ype – Check the Shared K ey radio button to start filter ing frames with addresses defined in the Standard WEP Se tup screen.
Quick Installation Guide 10 Wired Equivalent Priv acy (WEP) is implemen ted in this device to pre v ent unauthorized access to your wireless network. All wireless de vices m ust hav e the same K ey ID to communicate. 5. Click on the Finish button when completed.
Advanced Setup 11 Advanced Setup Click the Adv anced setup in the bottom r ight-hand corner to display additional inf ormation about the access point configuration as shown below: Note: The Advanced Setup screen allows you to view and change the current configuration of the access point.
Quick Installation Guide 12 Identific ation The SSID (Ser vice Set Identifica tion) is the name of a basic ser vice set provided b y an access point. All clients that want to connect to the Inter net via an access point must set their SSIDs to the same as that of the access point.
Advanced Setup 13 T urbo Mo de: Y ou may either Enab le or Disable the T urbo Mode. (Def ault: Disable) T urbo Mode is the enhanced wireless LAN oper ating mode (not regulated in the standard IEEE 802.11a) that can provide a higher data rate. The Normal Mode of the 802.
Quick Installation Guide 14 Synchronization In order to obtain transmission, the access point and connected clients need to be synchronized . Beacon Interval (20-1000 K µ s): Set the beacon interval between synchronization fr ames.
Advanced Setup 15 Transmit Thres hold Fragment Length (256-2346): The F ragment Length can be set between 256 and 2,346. If the pack et size is smaller than the preset fragment size, the pac ket will not be segmented.
Quick Installation Guide 16 TCP / IP Settings Set the TCP/IP configuration for accessing the Internet. DHCP Client : If Enable is selected, the IP address, subnet ma sk and default gatew ay can be dynamically assigned to the access poi nt by the network DHCP ser ver .
Advanced Setup 17 Encryption F or more secure data transmission, you ma y enable WEP (Wired Equiv alent Privacy) to prev ent unauthorized access to your wireless network.
Quick Installation Guide 18 Authentication Type Y ou may choose either the Open System or the Shared Ke y . (Def ault: Open System) If Shared K ey is enab led, WEP should be enab led and at least one shared ke y should be defined. But you can enab le WEP , and se t the authentication type as Open System.
Advanced Setup 19 How to Set up the Access Control List: 1. Select ACL Enab le 2. Enter an ACL ID (1 ~ 60) 3. Enter the MAC address of the station you w ant to set up . 4. Enter a Ke y Map , one of the shared keys (1 ~ 4) or one of the unique ke ys (5 ~ 64), and choose Allow or Deny .
Quick Installation Guide 20 System Administration New P assw ord Change the access point's password. Factory Default Use the Restore button to load the f actory default configuration and reboot this device . Note that all user-configured information will be lost.
Status 21 Status Checking the AP Status and Stations Status radio button s on the home page displa ys additional information about the access point status and Stations Status as shown in the follo win.
Quick Installation Guide 22 In the AP Status page, clic k the appropriate hyperlink to view the access point configuration, access point SME statistics (station association info r mation), or access point (transmit and receive) statistics .
Status 23 Station Configuratio n Station SME Station Statistics.
Quick Installation Guide 24 Network Configuration and Planning Accton’ s Cheetah wireless solution suppor ts a stand-alone wireless ne twork configuration, as well as an integrated configuration with 10/100 Mbps Ethernet LANs.
Network T opologies 25 Infrastructu re Wireless LAN The W A5001 can also provide access to a wired LAN f or wireless workstations. An integrated wired/wireless LAN is called an infr astructure configuration. A Basic Ser vice Set (BSS) consists of a group of wireless PC users, and an access point that is directly connected to the wired LAN.
Quick Installation Guide 26 Infrastructu re Wireless LAN for Roa ming Wireless PCs The Basic Service Set (BSS) is the communications domain for each Wi reless Access P oint. F or wireless PCs that do not need to suppor t roaming, set the domain identifier (SSID) fo r the wireless card to the BSS ID of the access point to which you w ant to connect.
T roubleshooting 27 Troubleshooting Check the f ollowing items bef ore you contact Accton T echn ical Suppor t. 1. If mobile users do not have roaming a ccess to the W A5001 Wireless Access P oint, ch.
Quick Installation Guide 28 Specifications Physical Cha racteristics Maximum Channels US & Canada: 8 (normal mode), 3 (turbo mode) Japan: 5 (normal mode), 1 (turbo mode) Maximum Clients 64 Operati.
Specifications 29 Sensitivity Modulation/Rate s Sensitivity (dBm) BPSK (6 Mbps) -85 BPSK (9 Mbps) -84 QPSK (12 Mbps) -83 QPSK (18 Mbps) -81 16 QAM (24 Mbps) -78 16 QAM (36 Mbps) -74 64 QAM (48 Mbps) -.
Quick Installation Guide 30 Modulation Modulation 5.15-5.25 GHZ (dBm) 5.25-5.35 GHZ (dBm) BPSK (6 Mbps) 16 20 BPSK (9 Mbps) 16 20 QPSK (12 Mbps) 16 19 QPSK (18 Mbps) 16 19 16 QAM (24 Mbps) 16 18 16 QA.
T erminology 31 Terminology The follo wing is a list of terminol og y that is used in this document. Access P oint – An internetwor king de vice that seam lessly connects wired and wireless networks. Ad Hoc – An ad hoc wireless LAN is a group of computers each with LAN adapters, connected as an ind ependent wireless LAN.
Quick Installation Guide 32.
.
WA5001 E042003-R01 150000007000A.
デバイスAccton Technology WA-5001の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Accton Technology WA-5001をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAccton Technology WA-5001の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Accton Technology WA-5001の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Accton Technology WA-5001で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Accton Technology WA-5001を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAccton Technology WA-5001の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Accton Technology WA-5001に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAccton Technology WA-5001デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。