PanasonicメーカーKX-TM150ALBの使用説明書/サービス説明書
ページ先へ移動 of 19
Digital Answering System Model No. KX-TM150ALB Operating Instructions PLEASE READ BEFORE USE AND SAVE. DIGITAL Caller ID Compatibility PQQX12356ZA-BM 01.
∑ AC Adaptor (p. 7) one ∑ Telephone Line Cord (p. 7) one For Australia only ∑ Telephone Plug (p. 7) one Before Initial Use Contents 2 3 Thank you for purchasing your new Panasonic digital answering system.
5 Display “ 4 Location of Controls SUN 12:00AM 5 new calls 1 0 messages SUN 12:00AM 0 message No items stored 5 new calls X =New W =Old 0211115555 In the stand-by mode, the display shows the current day and time, the number of new calls and recorded messages.
7 Settings “ Fasten the cords to prevent them from being disconnected. Connections To Power Outlet (AC 230 – 240 V, 50 Hz) AC Adaptor Telephone Plug (For Australia only) Telephone Line Cord ≥ USE ONLY WITH Panasonic AC ADAPTOR PQLV1AL. ≥ The AC adaptor must remain connected at all times.
9 8 “ To check the greeting message Press (GREETINGCHECK) . ≥ The greeting is played back and the display shows the elapsed time. To erase the recorded greeting message Press (GREETINGCHECK) “ (ERASE) while the message is being played. ≥ The unit will answer calls with a pre-recorded greeting.
Press VOLUME/SEARCH (^) or (_) for the desired settings. 11 10 “ If a power failure occurs or the AC adaptor is disconnected for more than 10 minutes, the adjusted day/time will be erased. For Caller ID service users (p. 19) ≥ The Caller ID information will re-set the clock after the first ring if the adjusted time is incorrect.
13 12 Automatic Answering Operation “ When the unit answers a call, a greeting message is played and the caller’s message is recorded. While recording, “ - Answering - ” will be displayed. ≥ The total recording time (including the greeting message and 2-way recording) is about 15 minutes .
15 Listening to Messages “ You can see the total number of recorded messages on the display. If the ANSWER indicator flashes, new messages have been recorded. Listening to only new messages Press (NEWMESSAGE) briefly. ≥ The unit announces the number of new messages and plays them back.
Press (STOP) . ≥ To resume playback, press (NEWMESSAGE) . ≥ If you do not press any button for 60 seconds or if you press (STOP) again, the unit will return to the stand-by mode. To repeat from the beginning of the message Press (REPEAT/REW) briefly.
19 18 Caller ID Service ≥ Caller information cannot be displayed in the following cases: —If the caller dialled from an area which does not provide a Caller ID service, the display will show “ Out of area ”. —If the caller has requested not to display his/her information, the display will show “ Private caller ”.
21 20 “ Ex. When you search from the most recent call: Press (CALLERID/DIAL) to enter the list. To return to the previous caller, press VOLUME/SEARCH (^) . To exit the Caller List , press (STOP) . ≥ The display will return to the stand-by mode. Press VOLUME/SEARCH (_) .
23 22 “ 1 Press (CALLERID/DIAL) to enter the list. 2 Press VOLUME/SEARCH (_) or (^) repeatedly to find the desired caller. 3 Press (FUNCTION/EDIT) to select a pattern. Each time you press (FUNCTION/EDIT) , the pattern will change. a – b 4 After editing the number, you can continue with calling back procedures.
25 24 Remote Operation from a Touch Tone Phone “ You can operate the answering system from any touch tone phone. A synthesised voice menu will guide you on how to operate the unit (p. 26). Summary of remote operation 1 Call your unit from a touch tone phone.
27 26 “ ≥ 3 seconds after playback, the voice menu will start again from the beginning. ≥ If you hear “ Memory full ” after playback, erase some, or all, of the messages (p. 28). Recording a Greeting Message You can re-record your greeting message.
29 28 Turning on the answering system Call your unit and wait for 15 rings. ≥ The unit will answer and the greeting message will be played. ≥ The answering system will turn on.
31 Problem You cannot operate the answering system from a touch tone phone. While recording a greeting message, a telephone connected to the same line starts to ring and stops recording. During playback, a telephone connected to the same line starts to ring and stops playback.
33 32 Safety Instructions Take special care to follow the safety suggestions listed below. Safety 1) The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit. 2) When left unused for a long period of time, the unit should be unplugged from the household AC outlet.
35 34 Important Information (For Australia only) Instructions to customer Installation Attached to this apparatus is an approval label. This label is evidence that it is a “Permitted Attachment” which has been authorised to be connected to your telephone service.
PQQX12356ZA-BM FM0899SA0 D Printed in Malaysia Kyushu Matsushita Electric Co., Ltd. 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan PQQX12356ZA-BM 01.
デバイスPanasonic KX-TM150ALBの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Panasonic KX-TM150ALBをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPanasonic KX-TM150ALBの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Panasonic KX-TM150ALBの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Panasonic KX-TM150ALBで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Panasonic KX-TM150ALBを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPanasonic KX-TM150ALBの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Panasonic KX-TM150ALBに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPanasonic KX-TM150ALBデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
