PanasonicメーカーPT-L6510Uの使用説明書/サービス説明書
ページ先へ移動 of 60
1 LCD Projector Commercial Use Operating Instructions PT -L6510U PT -L6600U Model No. Read these instructions completely before operating this unit. TQBJ 0118-1.
2 The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous v oltage” within the Product’ s enclosure that ma y be of sufficient magnitude to constitute a risk of electric shock to persons.
3 CA UTION: This equipment is equipped with a three-pin grounding-type power plug. Do not remove the grounding pin on the po wer plug. This plug will only fit a grounding-type po wer outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician.
4 IMPORT ANT SAFETY NOTICE ......................... 2 Precautions with regard to safety ................... 5 W ARNING ....................................................................... 5 Caution .................................................
5 Precautions with regard to safety W ARNING If a problem occurs (such as no image or no sound) or if you notice smoke or a strange smell coming fr om the projector , turn off the po wer and disconnect the po wer cord fr om the wall outlet. • Do not continue to use the projector in such cases, otherwise fire or electric shocks could result.
6 Do not place liquid containers on top of the pr ojector . • If water spills onto the projector or gets inside it, fire or electric shocks could result. • If any w ater gets inside the projector , contact an Authorized Service Center . Do not insert any foreign objects into the pr ojector .
7 Accessories Check that all of the accessories sho wn below ha ve been included with y our projector . Remote control unit [N2QAEA000003 x1] Power cord [K2CA3FZ00001 x1] Battery for remote control unit [R03NP A/2ST x1] Lens cover [TKKL5103 x1] RGB signal cable (for VGA) [3.
8 Cautions regarding transportation Be sure to attach the lens cover before transporting the projector . The projection lens is extremely susceptible to vibration and shocks . When carr ying the projector , be careful not to subject to excessive vibration or shock while under transport.
9 REMOTE RGB OUT OUT WIRED IN IN OUT IN R/R-Y/P R G/Y SYNC/HD VD B/B-Y/P B IN OUT OUT IN R L USB SERIAL S-VIDEO IN AUDIO IN RGB AUDIO AUDIO VIDEO RGB 2 IN OUT IN DVI-D RGB 1 IN > PC < TBMU152 RE.
10 ENTER button (pages 16 and 28) Press this button to enter your menu selection or to run functions. The button acts as the right mouse button if the Mode switch is set to the Computer position. FREEZE button (page 25) Press this button to temporarily freeze the image presently on the screen.
11 Status LED lights (Vie wed from the rear side) Remote control receiver window (page 14) Receives IR commands transmitted from the remote control. Focus ring (page 23) For focus adjustment. Powered focus adjustment is also available. Projection lens Images are projected onto the screen through this lens.
12 Stack Lid When two projectors are to be stacked, use this lid for positioning. Carrying handle Pull out this handle to carry the unit. Lamp unit compartment (page 43) Houses the lamp unit. Rear side remote control receiver window (page 14) Receives commands transmitted from the remote control.
13 < Interface panel > SERIAL IN port (pages 20, 21, 22 and 37) Use the RS-232C serial port as an alternative interface for controlling the projector from your PC. (D-SUB 9 pin) SERIAL OUT port (pages 21 and 22) The signal applied to the serial input port appears at this port (9-pin D-sub female connector).
14 projector Screen Remote control receiver window (Front) Remote control receiver window (Rear) Remote control REMOTE RGB OUT OUT WIRED IN IN OUT IN R/R-Y/P R G/Y SYNC/HD VD B/B-Y/P B IN OUT OUT IN R.
15 PUSH LASER RADIATION DO NOT STARE INTO BEAM WAVE LENGHT: 640-660nm MAXIMUM OUTPUT: 1mW CLASS I I LASER PRODUCT PRODUCT COMPLIES WITH DHHS RULES 21 CFR SUBCHAPTER J IN EFFECT AS OF DATE OF MANUFACTURE.
16 • When your PC is attached to the projector f or the first time, the “ new hardware wizard ” will launch automatically . When USB cable connects f or the first time between projector and PC , the f ollowing massage appear from PC. The reason that the driver not installed, therf ore press “ NEXT ” button contin uously and finally .
17 Projector's side interface panel To a second projector Remote control Remote control cable (accessory) Conversion plug (accessory) REMOTE RGB OUT OUT WIRED IN IN OUT OUT IN T USB SERIAL IO RGB.
18 Projection Distances Installation Geometry After the projector is roughly positioned, picture size and vertical picture positioning can be finely adjusted with the powered zoom lens and lens tilt mechanism.
19 Setup precautions • Bef ore connecting any of your video/audio equipment to the projector , carefully read the owners manual supplied with the equipment once again. • All cab le connections should be made with the entire system de vices, including the projector , first tur ned off.
20 REMOTE RGB OUT OUT WIRED IN IN OUT IN R/R-Y/P R G/Y SYNC/HD VD B/B-Y/P B IN OUT OUT IN R L USB SERIAL S-VIDEO IN AUDIO IN RGB AUDIO AUDIO VIDEO RGB 2 IN OUT IN DVI-D RGB 1 IN > PC < TBMU152 O.
21 Example of connecting with PCs Caution • When the projector's main power is turned OFF , also turn OFF all the PCs connected to it. • *1 An asterisk denotes that the second projector requires positioning if the RGB outputs are connected in a daisy chain.
22 Example of connecting with system switcher Setting-up REMOTE RGB OUT OUT WIRED IN IN OUT IN R/R-Y/P R G/Y SYNC/HD VD B/B-Y/P B IN OUT OUT IN R L USB SERIAL S-VIDEO IN AUDIO IN RGB AUDIO AUDIO VIDEO.
23 Fit the picture size to the screen size--- [Projector] Fit the picture size to the screen size with the “ ZOOM (+/-) ” buttons on the projector's rear control panel. Repeat steps through until the picture completely fits within the screen bounds.
24 Leveling the Projector For the best viewing result free from distortion, the projector should be carefully leveled on its base. Follow the steps below to correct the tilt angle of the projector when it is installed on a floor-standing base.
25 Using the Shutter function Using the Freeze function The picture freezes each time you press the remote control “ FREEZE ” button. The shutter function can be used to momentarily tur n off the .
26 Using the Digital Zoom (D.ZOOM +/-) function Caution • If the input video signal format is changed while in Zoom mode, the projector will exit Zoom mode.
27 On-screen menus Menu screens Menus are e xtensively used f or configuring, adjusting, or reconfigur ing the projector . The menu structure is as follows: MENU INDEX WINDOW PICTURE AUDIO OPTION 2 OP.
28 Basic Menu Operations 1. Press the “ MENU ” button. The MAIN MENU appears on the screen. (e.g. : MAIN MENU for the PT -L6510U) 2. Select (highlight) the desired item with the or buttons. Selected items are displa yed in yello w . 3. Press the “ ENTER ” button to enter your selection.
29 The picture presently on the screen can be sav ed to memor y as a still image. The sav ed image can then be shown alongside a moving image in a split screen (index window). Using the INDEX WINDO W function (PT -L6510U only) 1. Select the “ INDEX WINDOW ” from menu and press the “ ENTER ” button.
30 Adjusting the picture 1. Obtain the MENU window and select (highlight) the desired option item with the or buttons. 2. Adjust the parameter v alue with the or buttons. For items requiring a separate bar graph, first display the bar graph with the “ ENTER ” or / buttons, then adjust the parameter value with the or buttons.
31 TV -SYSTEM (for composite/S-video only) A UT O1: A utomatically selects the TV standard that matches the input video signal, out of NTSC, P AL, NTSC4.43, and SECAM. A UT O2: A utomatically selects the TV standard that matches the input video signal, out of NTSC, P AL-M, and P AL-N.
32 Adjusting the position 1. Obtain MENU window and move highlight cursor up and down through the menu with the or button. 2. Adjust parameter value f or the selected item with the or button. For items that call for a separate bar graph, first show the bar graph with the “ ENTER ” or / button, then adjust parameter value with the or button.
33 Adjusting the Zoom/Focus Changing the display language ZOOM “ ZOOM ” is used to adjust projected picture size. button: Increases picture size. button: Reduces picture size. When the picture size reaches the upper or lower limits, the color of the arrows on the four corners will change from light blue to red.
34 OPTION 1 settings 1. Obtain the MENU window and select (highlight) the desired adjustment item with the or buttons (on the projector or remote control).
35 LAMP SELECT “ LAMP SELECT ” is used to choose from Single Lamp and Dual Lamp modes depending on user's needs or viewing conditions. In Single Lamp mode, the projector may automatically select either lamp from the 2 lamps, or the particular lamp can be specified.
36 Deleting User Mode (e.g. Deleting the data of USER1) 1. Choose “ USER MODE ” on “ OPTION2 ” and press the “ ENTER ” button. 2. Choose “ DELETE ” using the or buttons. 3. Choose the address ( “ USER1 ” ) you want to delete data from using the or buttons and press the “ ENTER ” button.
37 The projector is equipped with an RS-232C standard serial ter minal at the rear . It is theref ore possible to connect it to a computer for control. Connection Using the SERIAL Communication requirements Basic format T ransmission from the computer begins with STX, then the command, parameter and ETX are sent in this order .
38 Power ON Remarks Command Control contents PON Power OFF POF Volume AVL Mute (audio mute) AMT Switch input modes IIS Switch RGB 1 · 2 input signals ORF Check lamp lighting condition Q$S Check lamp .
39 Using the remote terminal Using the remote ter minal built into this projector , it is possible to operate the projector from an e xternal location from where infrared remote control signals cannot be received, by using a remote control panel. Pin assignment and control Short pin 1 and pin 9 when controlling.
40 Indication of lamp monitor This projector is equipped with 3 indicators to show when a lamp needs replacement or there is an abnormal internal temperature. These lamps flash or light up to indicate a problem. T ur n the power off and f ollow the steps below .
41 If too much dust accumulates in the air filter , the temperature inside main unit will become high. • With the PT -L6510U , the temperature sensor (TEMP) lamp will flash. • With the PT -L6600U, the temper ature sensor (TEMP) lamp will flash and the light source lamp will go out.
42 Notes when replacing the lamp unit: • The inter nal pressure of the light source is high, theref ore if it is str uck b y hard objects or dropped, it may cause damage. Be careful when handling. • Handle the old lamp unit with care as it is easily broken.
43 Lamp unit replacement steps Caution • After 2000 hours of operating the same lamp , it is only possib le to operate the unit f or approximately 10 minutes.
44 8. Insert the power cord plug into the wall outlet and then press the MAIN POWER switch. Caution • If the power does not turn on even after turning the MAIN POWER switch “ I ” , turn the MAIN POWER “ O ” , confir m that the lamp unit and door are installed correctly , and turn on again.
45 Before asking for service ---Before asking for service, check the following points. Checks • Is the power cord plug correctly plugged in? • Is the MAIN POWER turned on? • Is electricity runni.
46 Specifications 1,398,784 pixels (1,366 x 1,024 dots) x 3 [625i] H = 15.63 kHz V = 50 Hz [720p] H = 45 kHz V = 60 Hz [1080i] H = 33.75 kHz V = 60 Hz PT-L6510U (XGA) PT-L6600U (SXGA) Model No.
47 RGB2 input Audio input for RGB 1/2 VIDEO S-video Audio input for composite/S-video Audio output RGB output SERIAL REMOTE WIRED input USB input USB output Power cord Enclosure Outer dimensions Weight Operating conditions Interface port Remote control High-density D-sub 15-pin connector (female) YP B P R input: Y = 1.
48 <Compatible RGB/YP B P R Signals> The f ollo wing table specifies the types of RGB/YP B P R signals compatib le with the projector . If signals other than this are applied, the projector may produce anything from a distorted display to simply the default (blue or black) background.
49 Dimensions unit : mm ( ) : inch 480 (18 57 / 64 ) 495 (19 31 / 64 ) (7 3 / 64 ) 179 476 (18 47 / 64 ) 495 (19 31 / 64 ) REMOTE RGB OUT OUT WIRED IN IN OUT IN R/R-Y/P R G/Y SYNC/HD VD B/B-Y/P B IN O.
50 T rademark • PS/2, VGA, and XGA are trademarks of U.S. IBM Corporation. • Macintosh is a registered trademark of U .S. Apple Computers, Inc. • PC-98 is a trademark of NEC Corporation. • S-V GA is a trademark or registered trademark of the Video Electronics Standards Association.
51 Le symbole de la fl è che en f or me d ’é clair , dans un triangle, av er tit l ’ usager de la pr é sence de “ tensions dangereuses ” à l ’ int é rieur du produit qui peuvent ê tre de f orce suffisante pour constituer un r isque de choc é Iectrique aux personnes.
52 Pr é cautions concernant la s é curit é A VER TISSEMENT En cas de probl è me (pas d ’ image ou de son), ou si le projecteur d é gage de la fum é e ou une odeur é trange, é teindre l ’ appareil et d é brancher imm é diatement la fiche d ’ alimentation de la prise de courant.
53 Brancher la fiche du cordon d ’ alimentation fermement dans la prise de courant. • Si la fiche n ’ est pas compl è tement ins é r é e , cela peut entra î ner des chocs é lectriques ou la f aire surchauff er . • Si la fiche est endommag é e ou la plaque de la prise est desserr é e, elles ne devraient pas ê tre utilis é es.
54 Ne pas court-circuiter , chauffer ou d é monter la pile et ne pas la placer dans I ’ eau ou le feu. • Cela peut f aire que la pile fuit, surchauffe , é clate ou prenne f eu et causer des br û lures ou autres blessures . Lors de l ’ insertion de la pile, s ’ assurer que les polarit é s (+ et -) sont correctes.
55 A ver tissements concernant la manipulation S ’ assurer d ’ attacher le capuchon d ’ objectif avant de transporter le projecteur . La lentille de projection est extr ê mement sensible à la vibration et aux chocs. Utiliser la sacoche de transport pour transporter le projecteur .
56 Attention Le bloc de lampe ne devrait ê tre remplac é que par un technicien quallfi é . Le couvercle du bloc de lampe sera chaud apr è s I'utllisation. • On risque de se br û ler si le couvercle du bloc de lampe est touch é pendant qu'il est chaud.
57 REMARQUES SUR LE REMPLACEMENT DE LA LAMPE • Une fois que vous avez retir é la lampe, manipulez-la avec pr é caution car elle contient du gaz sous haute pression et elle risque de s ’ endommager facilement si vous la heurtez contre des objets durs ou si vous la l â chez.
58 4. À l ’ aide d ’ un tournevis Phillips, desserrez les deux vis de fixation de la lampe jusqu ’à ce qu ’ elles puissent tourner facilement. Ensuite, saisissez la poign é e de la lampe et tirez doucement pour la sortir du projecteur . 3. Retirez la porte en la tirant vers l ’ avant.
59 Remarque • Si la touche MENU est enfonc é e, l ’é cran de r é initialisation de la dur é e de la lampe s ’ annule. Accessoire • 1 filtre à air 10. Appuyez sur la touche “ MENU ” pour afficher l ’é cran du men u principal, puis utilisez les touches et pour amener le curseur sur “ OPTION 2 ” et s é lectionner cette option.
P anasonic Broadcast & T elevision Systems Compan y Division of Matsushita Electric Cor poration of America One P anasonic W ay 4E-7 Secaucus , NJ 07094 (201) 392-4443 3330 Cahuenga Blvd West Los Angels , CA 90068 (323) 436-3500 T echnical Support: (800) 524-1448 (800) 526-6610 F AX: (201) 392-6514 E-Mail: pbtssupport@panasonic.
デバイスPanasonic PT-L6510Uの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Panasonic PT-L6510Uをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPanasonic PT-L6510Uの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Panasonic PT-L6510Uの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Panasonic PT-L6510Uで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Panasonic PT-L6510Uを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPanasonic PT-L6510Uの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Panasonic PT-L6510Uに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPanasonic PT-L6510Uデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
