PanasonicメーカーPT-L735NTUの使用説明書/サービス説明書
ページ先へ移動 of 67
ENGLISH Before operating this product, please read the instructions carefully and save this manual for future use. LCD Pr ojector Operating Instructions Model No.
2-E NGLISH IMPOR T ANT SAFETY NO TICE WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Dear P anasonic Customer: This instruction booklet provides all the necessary operating information that you might require.
E NGLISH -3 Preparation CAUTION: This equipment is equipped with a three- pin grounding-type power plug. Do not remove the grounding pin on the power plug. This plug will only fit a grounding- type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician.
4-E NGLISH Contents Preparation IMPORTANT SAFETY NOTICE ...2 Precautions with regard to safety .........................................5 Accessories .................................9 Before use ..................................10 Location and function of each part .
E NGLISH -5 Preparation Precautions with regar d to saf ety W ARNING If a problem occurs (such as no image or no sound) or if you notice smoke or a strange smell coming from the projector, turn off the power and disconnect the power cord from the wall outlet.
6-E NGLISH Do not do anything that might damage the power cord or the power cord plug. B Do not damage the power cord, make any modifications to it, place it near any hot objects, bend it excessively, twist it, pull it, place heavy objects on top of it or wrap it into a bundle.
E NGLISH -7 Preparation Do not look into the lens while the projector is being used. B Strong light is emitted from the projector’s lens. If you look directly into this light, it can hurt and damage your eyes. B Be especially careful not to let young children look into the lens.
8-E NGLISH When inserting the batteries, make sure the polarities (+ and -) are correct. B If the batteries are inserted incorrectly, they may explode or leak, and fire, injury or contamination of the battery compartment and surrounding area may result.
E NGLISH -9 Preparation Accessories Check that all of the accessories shown below have been included with your projector. Remote control unit (N2QAEA000015 x1) USB cable (K1HB04FD0002 x 1) Power cord (K2CG3FZ00008 x 1) AAA batteries for remote control unit (x2) RGB signal cable [3.
10-E NGLISH Bef ore use Cautions when mo ving the pr ojector Be sure to attach the lens cover before moving the projector. The projection lens is extremely susceptible to vibration and shocks. When moving the projector, use the accessory carrying bag.
E NGLISH -11 Preparation Notes on use In order to get the best picture quality Draw curtains or blinds over any windows and turn off any fluorescent lights near the screen to prevent outside light or light from indoor lamps from shining onto the screen.
Pr ojector <Top, right and front> 12-E NGLISH Location and function of each part # Focus ring (page 24) $ Zoom ring (page 24) % Projector control panel (page 14) & Connector panel (page 16) ' MAIN POWER switch (pages 23 and 25) ( Power input socket (AC IN) (page 23) The accessory power cord is connected here.
E NGLISH -13 Preparation # Security lock This can be used to connect a commercially-available theft- prevention cable (manufactured by Kensington). This security lock is compatible with the Microsaver Security System from Kensington. Contact details for this company are given below.
# RGB INPUT indicator (page 26) This indicator shows whether a signal is being input to the RGB input connectors (RGB 1 IN/RGB 2 IN). When an input signal is detected, the indicator illuminates. $ LAMP indicator (page 53) This indicator illuminates when it is time to replace the lamp unit.
E NGLISH -15 Preparation the signal being input. In addition, the angle of tilt of the projector will be automatically detected and adjusted in order to correct any keystone distortion. * SHUTTER button (page 28) This button is used to momentarily turn off the picture and sound.
16-E NGLISH Connector panel # USB port (page 31) The remote control unit can be used as a personal computer mouse by connecting the projector to a personal computer with the supplied USB cable.
E NGLISH -17 Preparation (PT -L735NTU only) Wireless car d SD memory card $ % # LOCK ' & Front Back # Connector This connector is for connecting the wireless card to the projector’s card slot. Be careful not to touch the connector. $ Wireless card power indicator Illuminates when the wireless card is operating.
18-E NGLISH Setting-up Pr ojection methods In way of installing projector, any one of the following four projection methods are used. Select whichever projection method matches the setting-up method. (The projection method can be set from the OPTION menu.
E NGLISH -19 Getting started Pr ojector position H1 L L SH SW 16 (-5/8) L: Projection distance SH: Image height SW: Image width H1: Distance from center of lens to bottom edge of projected image Top edge of screen Screen Bottom edge of screen Screen Pr ojection distances NOTE: B The dimensions in the table above are approximate.
20-E NGLISH NOTE: B If the video signal source is connected using a cable with a BNC connector plug, use a BNC/RCA adapter (sold separately) to convert the cable end to an RCA plug-type jack.
E NGLISH -21 Getting started Example of connecting to computer NOTE: B It is better to shut down the computer before turning off the MAIN POWER switch of the projector. B Do not input the signal to the RGB2 IN/RGB1 OUT connector when the RGB2 SELECT item in the OPTION menu is set to “OUTPUT”.
22-E NGLISH Operating range If the remote control unit is held so that it is facing directly in front of the remote control signal receptors on the front or rear of the projector, the operating range is within approximately 7 m (23´) from the surfaces of the receptors.
E NGLISH -23 Basic Operation T urning on the power Before turning on the power 1, Ensure that all components are connected properly. 2, Connect the accessory power cord. 3, Remove the lens cover. Press the MAIN PO WER switch to turn on the power . B The power indicator on the projector will illuminate red.
24-E NGLISH Press the input select b utton to select the input signal. B A picture will be projected in accordance with the selected input signal. Follow the procedure below when you set the projector up first, and when you change the setup place. Press the A UT O SETUP b utton to initiate automatic positioning.
E NGLISH -25 Basic Operation T urning off the power Press the PO WER button. B “Power OFF” is displayed on the screen. Select “OK” using the I I and H H b uttons and then press the ENTER b utton. B The lamp unit will switch off and the picture will stop being projected.
26-E NGLISH Power indicator Power indicator status Red Illuminated The projector is in standby mode and image projection is possible by pressing the POWER button. A picture is being projected. The lamp is cooling down after the power is turned off. (The cooling fan is operating.
E NGLISH -27 Correcting ke ystone distor tion and automatic positioning (A UT O SETUP) This projector detects its degree of tilt and the input signal. Keystone distortion and the position of the image can then be corrected automatically in accordance with the input signal.
28-E NGLISH T urning off the picture and sound momentaril y (SHUTTER) The shutter function can be used to momentarily turn off the picture and sound from the projector when the projector is not being used for short periods of time, such as during breaks in meetings or when carrying out preparation.
E NGLISH -29 Useful functions B The picture will then be enlarged to 1.5 times the normal size. The remote control unit functions during D.ZOOM (digital zoom) Use the F , G , I and H buttons to move the enlarged area which you want to project. Use the D.
30-E NGLISH Useful functions of the remote contr ol unit Laser beam pointer The laser beam emitted from the remote control can be used as a pointer by pointing forward to the screen. While the LASER button is being pressed, the laser beam is being emitted and the operating indicator illuminates.
E NGLISH -31 Useful functions Wireless mouse You can use the remote control as a personal computer mouse. Set the Mode (Projector/Computer) switch on the remote control unit to “ Computer ” and connect the projector ’ s USB port to a personal computer counterpart with the accessory USB cable.
32-E NGLISH 32 32 32 32 32 PICTURE PICTURE MODE CONTRAST BRIGHT SHARPNESS COLOR TEMP. WHITE BALANCE R WHITE BALANCE G WHITE BALANCE B STANDARD SELECT:[^][@] ADJUST:[{][}] ENTER:[ENTER] ESC:[MENU] STAN.
E NGLISH -33 Adjustments and settings POSITION POSITION DOT CLOCK CLOCK PHASE KEYSTONE OSD POSITION RESIZING AUTO SETUP FRAME LOCK STANDARD H: 128 V: 32 H: 0 V: 0 32 16 OFF OFF ON ON TOP LEFT SELECT:[.
34-E NGLISH OPTION OSD AUTO SEARCH AUTO SIGNAL AUTO KEYSTONE RGB2 SELECT RGB/YP B P R VGA60/525P BLACKBORD BACK COLOR NEXT PAGE @ OFF OFF OFF OFF INPUT RGB VGA60 OFF BLUE ON ON ON ON OUTPUT YP B P R 5.
E NGLISH -35 Adjustments and settings # Press the MENU button. The menu screen will be displayed. $ Press the I I or H H arrow buttons to select a menu. The selected menu screen will then be displayed. (Example: POSITION menu) % Press the G G arrow button to accept the selection.
36-E NGLISH & Select an item pressing the F F or G G buttons. A For the value adjusting items Press the ENTER button to display an individual adjustment screen. Press the I or H buttons to adjust the setting. You can also adjust the bar-scale items pressing the I or H buttons in the menu screen.
E NGLISH -37 Adjustments and settings Select the item pressing the F or G buttons on the remote control unit or the projector. Press the I or H buttons to set the selective items. For the value adjusting items, press the ENTER button to display an individual screen, and press the I or H buttons to adjust the setting.
38-E NGLISH CONTRAST This adjusts the contrast of the picture. Press the H button to make the picture brighter, and press the I button to make the picture darker. (Adjust the BRIGHT setting first if required before adjusting the CONTRAST setting.) BRIGHT This adjusts the darker areas (black areas) in the picture.
E NGLISH -39 Adjustments and settings Pr ojecting sRGB- compatible pictures sRGB is an international color reproduction standard (IEC61966-2- 1) established by the International Electrotechnical Commission (IEC). If you would like the colors in sRGB- compatible pictures to be reproduced more faithfully, make the following settings.
40-E NGLISH Select the item pressing the F or G buttons on the remote control unit or the projector. Press the I or H buttons, to adjust the alternative items. For the numerically adjustable items, press the ENTER button to display an individual screen, and press the I or H buttons to adjust the setting.
E NGLISH -41 Adjustments and settings Picture condition Operation Press the F F button. Press the G G button. Press the I I button. Press the H H button. DO T CLOCK (RGB only) Periodic striped pattern interference (noise) may occur when a striped pattern such as the one below is projected.
42-E NGLISH possible. B The picture size will also change when correction of keystone distortion is carried out. B The range of keystone correction varies depending on the type of signal being input (including when no signal is being input). If you make an adjustment that is outside the allowable range, the setting will not be changed.
E NGLISH -43 Adjustments and settings RESIZING This should normally be set to “ON”. (This setting is only for signals which have lower resolutions than the LCD panels. Refer to page 62 for details.) ON The pixel resolution of the input signal is converted to the same resolution as the LCD panels before being projected.
44-E NGLISH A udio adjustment Select the items by pressing the F or G buttons on the remote control unit or the projector. V OLUME Press the I or H buttons to adjust the volume of the sound output by the projector’s built-in speaker. MUTE Set the MUTE to “ON” pressing the I or H buttons to turn off the volume of the sound output.
E NGLISH -45 Adjustments and settings Use the F and G buttons on the projector or remote control unit to select an item, then press the I or H buttons to change the setting. OSD ON The current input name is displayed in the top-right corner of the screen when the input signal is changed.
46-E NGLISH RGB/YP B P R This setting is valid when 750p, HDTV60, HDTV50, 525p, 625i and 525i signals are being input. Select the setting in accordance with the input signal. The RGB/YP B P R item is displayed when the RGB1 IN or RGB2 IN connector has a signal being input.
E NGLISH -47 Adjustments and settings CONTR OL KEY To disable the buttons on the projector, set CONTROL KEY to “OFF”. A confirmation screen will then be displayed. Select “OK” by using I and H buttons. To use the buttons on the projector, set to “ON” by using the remote control unit.
48-E NGLISH Netw ork setup (PT-L735NTU only) You need make adjustment on some items when controlling the projector with a personal computer by means of the wireless network.
E NGLISH -49 Adjustments and settings Setting up the SECURITY function This projector is equipped with a security function. A password input screen can be displayed, or a company URL can be set up and displayed at the bottom of the projected image. A logo also can be displayed before projection.
50-E NGLISH CHANGE TEXT The setup letters which will be displayed when TEXT DISPLAY is set to “ON” can be changed. Press the ENTER button to display the CHANGE TEXT screen. # Use the F , G , I and H buttons to select the characters, then press the ENTER button.
E NGLISH -51 Adjustments and settings LOGO DISPLA Y A logo can be displayed before projection. ON LOGO DISPLAY is enabled. OFF LOGO DISPLAY is disabled. LOGO CLEAR Captured logo data can be cleared. Press the ENTER button to display the confirmation screen, and then select “ OK ” .
52-E NGLISH When the TEMP indicator and the LAMP indicator are illuminated There are two indicators on the control panel of the projector which give information about the operating condition of the projector.
E NGLISH -53 Care and maintenance Remedy Problem Indicator display Flashing (red) It is nearly time to replace the lamp unit. Illuminated (red) An abnormality has been detected in the lamp circuit.
54-E NGLISH NOTE: B Place the projector on top of a soft cloth so that it will not become scratched. NOTE: B Be sure to install the air filter cover before using the projector. If the projector is used without the air filter cover installed, dust and other foreign particles will be drawn into the projector, and malfunctions will result.
E NGLISH -55 Care and maintenance Replacing the lamp unit W arning The lamp unit should only be replaced by a qualified technician. When replacing the lamp, allow it to cool for at least one hour before handling it. B The lamp cover gets very hot, and contact with it can cause burns.
56-E NGLISH Lamp unit replacement procedure # Turn off the MAIN POWER switch according to the procedure given in “Turning off the power” on page 25, and then disconnect the power cord plug from the wall outlet and check that the area around the lamp unit has cooled down.
E NGLISH -57 Care and maintenance + Select the “LAMP RUN TIME” by pressing the F or G buttons. , Press and hold the ENTER button for approximately 3 seconds. The “ LAMP TIME RESET ” will be displayed. - Select “OK” by pressing the I I or H H buttons and press the ENTER button.
58-E NGLISH Bef ore calling for service Before calling for service, check the following points. Problem Possible cause Page Power does not turn on. No picture appears. The picture is fuzzy. COLOR is too light or TINT is poor. No sound can be heard. The remote control unit does not operate.
E NGLISH -59 Care and maintenance The picture does not display correctly. Picture from computer does not appear. Problem Possible cause B The signal format (TV system) may not be set correctly. B There may be a problem with the video tape or other signal source.
60-E NGLISH Specifications Power supply: 100 V – 240 V ~, 50 Hz/60 Hz Power consumption: 280 W (During standby (when fan is stopped): Approx. 5 W - 7 W) [When the WEB STANDBY is set to “ ON ” (PT-L735NTU only) : Approx. 30 W (page 48)] Amps: 3.5 A – 1.
E NGLISH -61 Others During RGB input/output: R.G.B.: 0.7 V [p-p], 75 Ω G.SYNC: 1.0 V [p-p], 75 Ω HD/SYNC: TTL, automatic plus/minus polarity compatible VD: TTL, automatic plus/minus polarity compatible AUDIO IN (for RGB): Single-line 0.5 V [rms] M3 jack (Stereo MINI) VIDEO IN: Single-line, RCA pin jack 1.
62-E NGLISH Appendix *1 The “ i ” appearing after the resolution indicates an interlaced signal. *2 The following symbols are used to indicate picture quality. AA Maximum picture quality can be obtained. A Signals are converted by the image processing circuit before picture is projected B Some loss of data occurs to make projection easier.
E NGLISH -63 Others Connector pin wiring B The pin layout and signal names for the S-VIDEO IN connector are shown below. Pin No. Signal # Earth (Luminance signal) Earth (Color signal) Luminance signal Color signal $ % & B The pin layout and signal names for the RGB/YP B P R (RGB1 IN/RGB2 IN) connector are shown below.
64-E NGLISH Using the SERIAL connector The serial connector which is on the side connector panel of the projector conforms to the RS-232C interface specification, so that the projector can be controlled by a personal computer which is connected to this connector.
E NGLISH -65 Others Control commands The commands which the personal computer can use to control the projector are shown in the following table. Command Control Contents Remarks In standby mode, all commands other than the PON command are ignored. B The PON command is ignored during lamp ON control.
66-E NGLISH These Operating Instructions are printed on recycled paper. T rademark ac knowledgements B The SD logo is a trademark. B Windows is a trademark or registered trademark of Microsoft Corporation in the United States of America and other countries.
Professional/Industrial Video Panasonic Broadcast & Television Systems Company Division of Matsushita Electric Corporation of America One Panasonic Way 4E-7 Secaucus, NJ 07094 (201) 392-4443 3330 .
デバイスPanasonic PT-L735NTUの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Panasonic PT-L735NTUをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPanasonic PT-L735NTUの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Panasonic PT-L735NTUの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Panasonic PT-L735NTUで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Panasonic PT-L735NTUを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPanasonic PT-L735NTUの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Panasonic PT-L735NTUに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPanasonic PT-L735NTUデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
