Patton electronicメーカー2160の使用説明書/サービス説明書
ページ先へ移動 of 113
CopperLink™ Model 2160 Series Long Range Ethernet Extender User Manual Sales Office: +1 (301) 97 5-1000 Techni cal Su ppor t: +1 (301) 97 5-1007 E-mail: suppor t@patton.
Patton Electronics Company , Inc. 7622 Ric kenbacker Drive Gaithersburg , MD 20879 USA Tel: +1 (301 ) 975- 1000 Fax: +1 ( 301) 8 69-929 3 Support: +1 (30 1) 975 -1007 Web: www.pa tton.com E-mai l: suppo rt@ pat ton. co m T rademark Statement The term Coppe rLink is a trademar k of Patto n Electro nics Comp any.
3 Summar y T able of Contents 1 General information ..... ...... ..... ...... ...... ......... ...... ..... ...... ......... ...... ...... ..... ...... ......... ...... ..... ...... ......... ...... ...... . 17 2 Applications overview ...... ........ .
4 T able of Contents Summary Table of Contents ...... ...... ...... ...... ........ ...... ...... ...... ...... ........ ...... ...... ...... ......... ..... ...... ...... ...... ......... 3 Table of Contents .. ...... ......... ..... ...... ...... ..
5 Model 2160 Series User Manual Table of Con tents Con figuring th e Model 2 160 .................... ............ ........... ................. ........... ............ ........... ........... ................. ..... .. 32 Web c onfigur ation requ irem ents .
6 Model 2160 Series User Manual Table of Con tents WFQ Config uratio n ......... ........... ........... ................. ............ ........... ........... ........... ................. ............ . 57 IP DSCP Prio rity Tab le ............... ..
7 Model 2160 Series User Manual Table of Con tents Clear ........... ........... ........... ................. ........... ............ ........... ........... ................. ........... ... ......... ........... .......78 LAN ........... .........
8 Model 2160 Series User Manual Table of Con tents Backup system configura tion ............. ............ ........... ........... ................. ............ ........... ........... ........... ...........100 Restore system configuration .........
9 List of Fi gures 1 Model 2160 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 2 Model 2160 front panel LEDs . . . . . . . . . . . . . . . . . . .
10 Model 2160 Series User Manual 48 Remote Management Host section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 49 SNMP Administrati on page . . . . . . . . . . . . . . . . . . .
11 List of T ables 1 General conven tions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2 Front panel LE Ds . . . . . . . . . . . . . . . . . . . . . . . . .
12 About this guide This guid e desc ribe s the Co pperLi nk™ Model 2160 ha rdware , installati on and basic c onfiguratio n. Audien ce This guid e is intended f or the followi ng user s: • Opera .
13 Model 2160 Series User Manual About this guide Precau tions Notes, ca utions, and warnings, which have t he foll owing meani ngs, are us ed thro ughout th is guide to help yo u become aware of potential problems. Warnin gs are intended to prev ent safety hazards that co uld result in per- sona l inju ry.
14 Model 2160 Series User Manual About this guide Safety when working wi th electricity The Model 2160 contai ns no user servic eable parts. Th e equipment shall be returned to P atton Electronics for repairs, or re paired by qualified se rvice per- sonnel .
15 Model 2160 Series User Manual About this guide Preventing Electrostatic Discharge Damage When starti ng to install interface c ards place the i nterface card on its shield ed plastic bag if you lay it on your bench. Electrostatic Di scharge (ESD) c an damage equipment and impa ir electrical circuitry.
16 Model 2160 Series User Manual About this guide T ypographic al conventions used in this document This section de scribes th e typographical con ventions and terms use d in this guide. Gener al conven tions The procedures d escribed in this manual use the following text conventions: Table 1 .
17 Chapter 1 General i nformation Chapter cont ents Model 2160 overvi ew ............... ........... ........... ........... ............ ................. ........... ........... ........... ................. ............ . 18 Model 2160 front panel .
Model 2160 overview 18 Model 2160 Series User Manual 1 • Gen eral info rmation Model 2160 over view The Pat ton Cop perLin k™ Model 2160 simplifi es and pr ovides cost e ffect ive net work ex tens.
Model 2160 front panel 19 Model 2160 Series User Manual 1 • Gen eral info rmation Model 2160 front panel LED descrip tions The fr ont panel LEDs di splay the status of the pow er, syst em, Ether net port s, and Li ne port . Figure 2 shows the front panel LED ind icators and table 2 provid es a des cription of the LED indi cators ’ behav ior.
Model 2160 rear panel 20 Model 2160 Series User Manual 1 • Gen eral info rmation Model 2160 rear panel Por t descripti ons The Cop perLi nk™ Model 2160 r ear panel p orts are shown in fi gure 3 and descri bed in table 3 . Figure 3. Model 2160 rear panel Note For port pi nout informati on, see Append ix C, “Port pin-outs” on page 111.
Model 2160 rear panel 21 Model 2160 Series User Manual 1 • Gen eral info rmation Reset button • To res tart the unit with th e current st artup configurati on—Press for les s than 1 second and release the Rese t button. The Mode l 2160 will restar t with t he curren t startup c onfigurat ion.
22 Chapter 2 Applications over view Chapter cont ents Introd ucti on ....................... ........... ........... ................. ............ ........... ........... ............ ................ ...... ........... ............ . 23 Typical ap plication .
Introduction 23 Model 2160 Series User Manual 2 • Applications overview Intr oduction The Pat ton Cop perLin k™ Model 2160 simplifi es and pr ovides cost e ffect ive net work ex tensio n by utili .
Distance charts 24 Model 2160 Series User Manual 2 • Applications overview Distance cha rts Distanc e Chart 2160 Series – Auto Mode ( TCP AM-32/16) Table 4. D istance Chart 2160 Series – Auto Mode Line Rate Dista nce Line Speed 2160 2-Wir e 2161 4-Wir e 2162 8-Wire 26 A WG/0.
Distance charts 25 Model 2160 Series User Manual 2 • Applications overview Distanc e Chart 2160 Se ries – Optima l Mode ( TCP AM-128) Table 5. Distance Chart Model 2160 Series – Optimal Mode Line Rate Dista nce Line Speed 2160 2-Wir e 2161 4-Wir e 2162 8-Wire 26 A WG/0.
Distance charts 26 Model 2160 Series User Manual 2 • Applications overview Distanc e Chart 2160 Se ries – TCP AM-128 Table 6. Distance Chart Model 2160 Series – TCPAM-128 Line Rate Dista nce Line Speed 2160 2-Wir e 2161 4-Wir e 2162 8-Wire 26 A WG/0.
27 Chapter 3 Hardware installation Chapter cont ents Introd ucti on ....................... ........... ........... ................. ............ ........... ........... ............ ................ ...... ........... ............ . 28 Planning the in stallati on .
Introduction 28 Model 2160 Series User Manual 3 • Hardware installation Intr oduction This chapte r contains i nformati on for planning the install ation of the Model 2160 with the fol lowing ins ta.
Plan ning t he instal lation 29 Model 2160 Series User Manual 3 • Hardware installation Network di agram Draw a network overview diagram that displays all neighboring IP nodes, connected elements and telephony c omponents. Fi gure 5 shows possible networ k conne ctions t o the Model 21 60.
Installing the Model 2160 30 Model 2160 Series User Manual 3 • Hardware installation Note When setti ng up your Model 2160 you mus t consid er cable- length limitations and po tential electromagnetic i nterference (EMI) as defined by the applicable l ocal and internati onal regulations .
Installing the Model 2160 31 Model 2160 Series User Manual 3 • Hardware installation Gr oundi ng the Model 2160 and co nnec ting power In connecting to the power source, it is imp ortant to establish a good grounding connect ion first, then the power connection.
Configuring the Model 2160 32 Model 2160 Series User Manual 3 • Hardware installation Confi gurin g the Mode l 2160 There are thre e different ways yo u can configure th e Model 2160: the serial consol e, Telnet, or a web brows er.
33 Chapter 4 W eb configuration Chapter cont ents Introd ucti on ....................... ........... ........... ................. ............ ........... ........... ............ ................ ...... ........... ............ . 35 Setting Up the WMI .
34 Model 2160 Series User Manual 4 • Web configurati on IP D SCP Pri or ity T ab le ................ ........... ............ ........... ........... ................. ........... ............ ........... ...... 58 IP DSCP Config uration Example ...
Introduction 35 Model 2160 Series User Manual 4 • Web configurati on Intr oduction The Model 2160 provides a browse r inter face that allow s you to configure and mana ge the Etherne t Extender . Make sure that the PC you use fo r configurati on has an Ethernet adapter and TCP/IP installed.
Basi c Conf igurati on Opti ons 36 Model 2160 Series User Manual 4 • Web configurati on Type the default User name root an d defau lt Passwo rd root and then click OK . For system security, you should change the user name and password after initial onfiguration.
Basi c Conf igurati on Opti ons 37 Model 2160 Series User Manual 4 • Web configurati on Oper atio n mode and Ma nageme nt port To configure the operation mode and M anagement port in the WMI: 1. From the main menu, clic k Basi c to display t he basi c install ation page .
Basi c Conf igurati on Opti ons 38 Model 2160 Series User Manual 4 • Web configurati on supervise and distribute IP addresses from a central point and automatically sends a new IP address when a compute r is plugged i nto a different place i n the network.
Basi c Conf igurati on Opti ons 39 Model 2160 Series User Manual 4 • Web configurati on LAN To confi gure LAN settings th rough the WMI: 1. Clic k on Ba sic from the main menu. Set up the Operation Mode and Manage ment port , then cl ick Next . Set up the DHCP Server , then click Next to reach the LAN page.
Basi c Conf igurati on Opti ons 40 Model 2160 Series User Manual 4 • Web configurati on Review and save basic setup changes 1. Once you hav e entered infor mation on the pages for Operation Mode and Management Port , DH CP Server , and LAN , the Bas ic Setup Revie w page will display to confirm your c hanges.
Advanc ed Co nfigur ation Optio ns 41 Model 2160 Series User Manual 4 • Web configurati on Advanc ed Confi gurati on Opt ions This se ction contai ns info rmation for setting up advance d options for th e Model 2 160 via the WMI. Advanc ed setup cont ains Model 2 160 Line, VLAN, Qo S and Rate Contr ol paramete rs.
Advanc ed Co nfigur ation Optio ns 42 Model 2160 Series User Manual 4 • Web configurati on TCPAM Type TCPAM (Trellis Coded Pul se Amplitu de Modulati on) is the standard u sed for line coding. Sel ect the TCPAM type from the drop -down lis t. Auto is the default option for TCPAM .
Advanc ed Co nfigur ation Optio ns 43 Model 2160 Series User Manual 4 • Web configurati on VLAN Click on VL AN under Advanced on the main menu to reac h the VLAN advanced conf iguration page. Figure 14. VLAN page VLAN (V irtual Local Are a Network) allows a physi cal network to be partitioned into multiple logical net- works.
Advanc ed Co nfigur ation Optio ns 44 Model 2160 Series User Manual 4 • Web configurati on Figure 15. VLAN Diagram VID 20 VID 30 VID 10 P W R A L M D I A G W A N L A N 1 0 0 M L I N K / A C T L I N .
Advanc ed Co nfigur ation Optio ns 45 Model 2160 Series User Manual 4 • Web configurati on 802.1Q Tag-Ba sed VLAN Click on VL AN under Advanced on the main menu to reac h the VLAN advanced configuration page. Then, select the radi o butto n for 802.
Advanc ed Co nfigur ation Optio ns 46 Model 2160 Series User Manual 4 • Web configurati on Tag-Based VLAN Overview. Figure 17 shows the breakdown of the VLAN tag field.
Advanc ed Co nfigur ation Optio ns 47 Model 2160 Series User Manual 4 • Web configurati on Ports i n the same VLAN group share the same f rame broadcas t domin t hus incre ase netwo rk perfor mance through reduce d boardcast traf fic. You can modify V LAN groups at any time by adding, moving or changing ports without any r e-cabling.
Advanc ed Co nfigur ation Optio ns 48 Model 2160 Series User Manual 4 • Web configurati on • Untagg ed VLANs - Untagged (or static) VLANs are typically us ed to reduce broadcast tr affic and to increase security. A group of network users assigned to a VLAN form a broadcast domain that is separate from other VLANs conf igured on the Mode l 2160.
Advanc ed Co nfigur ation Optio ns 49 Model 2160 Series User Manual 4 • Web configurati on Quality of Service (QoS) Quality of Serv ice (QoS) refers to both a network's ability to deliver d ata with minimum delay, and the net- working methods used to control the use o f bandwidth.
Advanc ed Co nfigur ation Optio ns 50 Model 2160 Series User Manual 4 • Web configurati on Port Based Priority Click on QoS under Advanced on the main menu to reach the QoS advanced configur ation page. Then, select the radio b utton for Port B ased Priority to display the configuration options.
Advanc ed Co nfigur ation Optio ns 51 Model 2160 Series User Manual 4 • Web configurati on • Weight Round Robin (WRR): All received packets wi ll be stored i nto Queue 1, Q ueue 2, Queue 3 , and Queue 4. Assign a weight value for eac h queue. Then, WRR wi ll re-assemble all pac kets from the four queues based on the weight ass ignments.
Advanc ed Co nfigur ation Optio ns 52 Model 2160 Series User Manual 4 • Web configurati on • Strictly Priority (SP): The SP Qu eue Type uses q ueues that are bas ed on priori ty only. SP transm its the highest prio rity queue fir st, then the next highest p rio rity queue, and so on.
Advanc ed Co nfigur ation Optio ns 53 Model 2160 Series User Manual 4 • Web configurati on VLAN Tag Priority Click on QoS under Advanced on the main menu to reach the QoS advanced configur ation page. Then, select the radio b utton for VL AN Tag Priorit y to display th e configuration o ptions.
Advanc ed Co nfigur ation Optio ns 54 Model 2160 Series User Manual 4 • Web configurati on Scheduling Configuration. The 2160 provides thre e combinations of four commonl y used techniques: Type 1, Type 2 and Type 3. Sel ect a ty pe in the Scheduli ng Confi guration se ction, then provi de de tails in the cor re- spond ing table.
Advanc ed Co nfigur ation Optio ns 55 Model 2160 Series User Manual 4 • Web configurati on VLAN Tag Priority Table. Select a packet w ith an assigned prio rity to corres pond with each q ueue. Figure 33. QoS - VLA N Tag Priority Table Configur ation Ex ample.
Advanc ed Co nfigur ation Optio ns 56 Model 2160 Series User Manual 4 • Web configurati on Figure 34. Service by WRR IP DSCP Priority Differe ntiated Servi ces Code Point (DSCP) is the 6-bit fiel d in the header of IP packets, and it is for packet clas sif ica tion p urpos es.
Advanc ed Co nfigur ation Optio ns 57 Model 2160 Series User Manual 4 • Web configurati on Click on QoS under Advanced on the main menu to reach the QoS advanced configur ation page. Then, select the radio b utton for IP DSCP Priority to display the configuration op tions.
Advanc ed Co nfigur ation Optio ns 58 Model 2160 Series User Manual 4 • Web configurati on IP DSCP Pri ority Table. Select the q ueue for eac h DSCP leve l.
Advanc ed Co nfigur ation Optio ns 59 Model 2160 Series User Manual 4 • Web configurati on Rate Limit Click on Rate Limit unde r Advanc ed on the main menu to reach the Rate Control configuration page.
Status Options 60 Model 2160 Series User Manual 4 • Web configurati on Status Option s This sect ion contains inf ormation for moni toring status options fo r the Model 2160 via the WMI. The St atus menu contains Line, Management, LAN, Performanc e and Syslo g parame ters.
Status Options 61 Model 2160 Series User Manual 4 • Web configurati on LAN Status The LAN Statu s page displays information about a LAN port. Th e syste m will allow yo u to selec t whic h LAN port to vi ew.
Administration Options 62 Model 2160 Series User Manual 4 • Web configurati on Administ ration Options This sect ion allows you t o configu re adminis tration options for Security, Si mple Network Manageme nt Proto- col (SNMP) and Remote System Log.
Administration Options 63 Model 2160 Series User Manual 4 • Web configurati on Remote Manag ement Hosts The Remote Manageme nt Host section of the Securi ty Administration page enables you to set up the legal IP addres ses fr om which auth orized persons can conf igure th e Model 216 0.
Administration Options 64 Model 2160 Series User Manual 4 • Web configurati on Click SNMP in the Admi nistration menu to s et up the parameters. Figure 49. SNMP Administration page Comm unity Pool An SNMP community is a g roup of device s and manage ment stations running SNMP.
Administration Options 65 Model 2160 Series User Manual 4 • Web configurati on After configuring the c ommunity pool, click Finish . The browser wi ll prompt the c onfigured param eters and check it before wr iting into NVRAM. Press Resta rt to reboot the Model 2160 with the ne w settings.
Utility Opti ons 66 Model 2160 Series User Manual 4 • Web configurati on Utility Option s This se ction allow s you to manage utili ty optio ns for th e Model 21 60, inclu ding syste m informatio n, the con- figuration too l, upgrade info rmation, log out of the system, and restart the system.
Utility Opti ons 67 Model 2160 Series User Manual 4 • Web configurati on Note This option wi ll change all of the settings b ack to factory d efault. You will lose all of your cu rrent settings. • Restore Con figurat ion: Use this option to recover the b ackup co nfiguration easi ly.
Utility Opti ons 68 Model 2160 Series User Manual 4 • Web configurati on Logou t To exit t he Model 2 160 Web Management I nterface s ecurel y, clic k Logout in the Utility menu. You have to log in with your password again after you l og out. This is reco mmended after you fi nish a management sessio n for se curi ty re asons.
69 Chapter 5 Console and T elnet configuration Chapter cont ents Introd ucti on ....................... ........... ........... ................. ............ ........... ........... ............ ................ ...... ........... ............ . 71 Log in to the co nsole int erface .
70 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on Host Name ....... ........... ........... ........... ............ ................. ........... ........... ............ ........... ............ ..... ........... .......89 Factor y Defa ult .
Introduction 71 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on Intr oduction This chapt er pro vides i nformatio n for conf iguri ng the Mo del 2160 by us ing the s erial co nsole w ith Tel net.
Introduction 72 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on The Model 2160 us es a menu- drive n i nterf ace for s eria l console and Telnet manage ment. This interf ace dis- plays all avail able commands for configuring the Ethernet Extender.
Main Menu Tree 73 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on Main Menu T ree The commands available in the main menu tree depend on if you have logged in using a supervisor password (authori zed user) or not (una uthorized user).
Main Menu Tree 74 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on Figure 61. Main screen for authorized users Menu tree for unautho rized users Unauthoriz ed user s may access the fol lowing co nfigur ation command s for th e Model 21 60.
Enab le Com mand Menu 75 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on Enable Co mmand Menu The enable command menu list s commands f or setting u p the Model 2 160. Move t he cur sor “ >> ” to enable and pre ss Enter.
Setup Command Men u 76 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on Setup Command Menu The setup command menu lis ts c ommands for i nitially c onfigur ing the Mode l 2160. Move the c ursor “ >> ” to setu p in the main menu and pr ess Enter .
Setup Command Men u 77 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on Mode There are two types of Line mode : • STU- C : Centr al Offi ce ( CO) termi nal • STU- R: Custom er Premis e Equipment (C PE) Link Select the line typ e for your mode l.
Setup Command Men u 78 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on Line Probe For adaptive mode applications, set the Li ne Pro be to Enable . The Mode l 2160 will adapt the data rate accord- ing to the line status. For all other applications, set the Line Probe to Disabl e .
Setup Command Men u 79 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on VLAN Virtual LAN (VL AN) is define d as a gr oup of device s on one or more LANs that are configured so .
Setup Command Men u 80 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on 802. 1Q VLAN. To modify the VLAN rule, move the cursor to modify and press Enter.
Setup Command Men u 81 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on ----------------------------------------------------------------------------- Command: setup vlan link_mode <1~6> <Access|Trunk> Message: Please input the following information.
Setup Command Men u 82 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on QoS Quality of Serv ice (QoS) refers to both a network's ability to deliver d ata with minimum delay, and the net- working methods used to control the use o f bandwidth.
Setup Command Men u 83 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on ----------------------------------------------------------------------------- Command: setup qos qSchdl <Type1|Type2|Type3> Message: Please input the following information.
Setup Command Men u 84 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on Queu e Egress Ra te Queues 0 -3 can set up the egr ess rate for WFQ configurati on. The egr ess rate N valu e can be set from 0 to 22. The N value 0 means no li mits.
Setup Command Men u 85 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on VLAN Tag P riori ty uses the tag fiel d informat ion whic h has been i nserte d into an Ethernet frame. If a po rt has an 802.1Q-compliant device attached (such as this Et hernet Extender), these tagged f rames can carry VL AN membership information.
Setup Command Men u 86 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on List Use the list command to view the Q oS settings. Rate The rate command menu lists commands for setting the port rat e. Move the cursor “ >> ” to rate in the setup menu and pr ess Enter.
Setup Command Men u 87 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on Manageme nt The M anagem ent command menu lis ts commands for conf iguri ng the IP address and subnet mask for t he Management port. Mo ve the cursor “ >> ” to Ma nagemen t in the setup menu and press Enter.
Setup Command Men u 88 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on DHCP Server The dhcp command menu list s commands for config ur ing DHCP setti ngs. Move the cursor “ >> ” to dhcp in the setup menu and p ress Enter.
Setup Command Men u 89 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on When using the fixed host entry functio n, you must en ter the MA C address and IP address at the same time. You ca n conf igure u p to 10 m aximu m fixe d host IP addres ses.
Status Command Men u 90 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on Status Command Menu The status command menu li sts co mmands for vie wing the system status of inte rfaces on the Model 2160. Move the cur sor “ >> ” to status in the main me nu and pre ss Enter.
Status Command Men u 91 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on Inter face Status To view th e status of the Ma nagement interface, m ove the cursor “ >> ” to interf ace in th e status menu and press Ent er. Figure 65.
Show Command Menu 92 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on Show C ommand Menu The show command menu li sts commands f or viewi ng system and con figura tion infor matio n for the Mode l 2160. Move the cursor “ >> ” to show in the main menu and press Enter.
Writ e Comm and 93 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on W rite Command The write command saves all new co nfigurati on changes to Flash on the Mod el 2160. Yo u must use t he wri te command and reboot the Ethernet Extender for new conf iguration changes to tak effect.
Ping Comman d 94 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on - 1~65534: Sets th e number of p ing req uest pac kets fr om 1 to 6 5534 - -t : Results r un continuousl y unt.
Administration Comm and Menu 95 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on Administ ration Co mmand Menu The admin command menu lists c ommands for mo difying use r prof iles, T elnet access , Simpl e Network Man- agement Proto col (SNM P), and superv isor inform at ion (username and password).
Administration Comm and Menu 96 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on There are two UI mode s for se tting up the Model 2160, command and menu mode. Th e menu mode uses a menu-driven interface. The command mode uses line commands.
Administration Comm and Menu 97 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on ----------------------------------------------------------------------------- Command: admin security ip_pool modify <1~16> <ip> Message: Please input the following information.
Administration Comm and Menu 98 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on ----------------------------------------------------------------------------- Command: ... 2 edit <Disable|Enable> <string> <Read_Only|Read_Write|Denied> Message: Please input the following information.
Administration Comm and Menu 99 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on You can set up the following options: • Versio n: Set to Disable , Versio n 1 or Versio n 2 . • Trap host IP add ress: Enter th e dtrap ho st IP address.
Utility Com mand Menu 100 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on Utility Command Menu Model 216 0 has three ut ility to ols embe dded in t he fir mware: up grade , back up and restore .
Utility Com mand Menu 101 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on -----------------------------------------------------------------------------.
Exit Command 102 Model 2160 Series User Manual 5 • Con sole and Telne t config urati on Exit Command To log out of the syste m without saving your changes, move the cursor “ >> ” to exi t in the main me nu and press Ent er.
103 Chapter 6 Contacting Patton for assistance Chapter cont ents Introd ucti on ....................... ........... ........... ................. ............ ........... ........... ............ ................ ... ... ........... ...........104 Contact inf ormati on .
Introduction 104 Model 2160 Series User Manual 6 • Contacting P atton for assistance Intr oduction This chapte r contains t he foll owing info rmation: • “Contact information” —des cribes how to contac t Patton technical sup port for assistance.
Warranty Service and Returned Merch andise Authorizations (RMAs) 105 Model 2160 Series User Manual 6 • Contacting P atton for assistance Out-of-war ranty serv ice Patton servic es what we sell, no matter how you ac quired it, inc luding malfunctioning p roducts that are no longer under warranty.
106 Appendix A Compliance information Chapter cont ents Comp liance .................. ................. ........... ............ ........... ........... ................. ............ ........... ....... .... ................. .....107 EMC co mplian ce: .
Compl iance 10 7 Model 2160 Series User Manual A • Compliance information Complia nce EMC c ompl ianc e: • FCC Pa rt 1 5, Cl ass A • EN55022, Clas s A • EN55024 Radio and T V inter ference (FC.
108 Appendix B Specifi cations Chapter cont ents Line Connector ............ ................. ........... ............ ........... ................. ........... ............ ........... ........... .. ............... .....109 Line Modulation ........
Line Connector 10 9 Model 2160 Series User Manual B • Specifications Line Co nnecto r Shielded RJ- 45 Line Modula tion TC-PAM 32 TC-PAM 16 TC-PAM 128 Ethern et Connect or 4 x 8-p osition shi elded RJ-45 Auto-se nsing 10/10 0Base-TX w ith half or full-du plex operati on LAN Protoco ls 802.
Management Interface 110 Model 2160 Series User Manual B • Specifications Managem ent Inter face Web ba sed GUI CLI for lo cal and console access; pas sword protected; SNMP v1/v2 (RFC 1 157/1901/1 905) agent and MIB (RFC 1213/1493) EFM OAM (IEEE 8 02.
111 Appendix C Por t pin-outs Chapter cont ents Introd ucti on ....................... ........... ........... ................. ............ ........... ........... ............ ................ ... ... ........... ...........112 Console port .......
Introduction 112 Model 2160 Series User Manual C • Port pin- outs Intr oduction This se ction pro vides p in-out inf ormation for th e ports of th e Model 21 60. Conso le port Confi guration se tti ngs: 960 0 bps, 8 bi ts, no par ity, 1 stop bit, no f low control Figure 68.
Ethernet 113 Model 2160 Series User Manual C • Port pin- outs Ethernet Note Pins not listed are not used. Line (Co pperLi nk) Table 34. RJ45 socket 10/100Base -T Pin Signal 1 TX+ 2 TX- 3 RX+ 6 RX- Table 35.
デバイスPatton electronic 2160の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Patton electronic 2160をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPatton electronic 2160の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Patton electronic 2160の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Patton electronic 2160で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Patton electronic 2160を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPatton electronic 2160の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Patton electronic 2160に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPatton electronic 2160デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。