Patton electronicメーカー2635の使用説明書/サービス説明書
ページ先へ移動 of 133
Models 2603, 2621, and 2635 IPLink Series High Speed Routers Getting Star ted Guide Sales Office: +1 (301) 975-1000 T echnical Support: +1 (301) 975-1007 E-mail: support@patton.
Patton Electronics Company , Inc. 7622 Rickenbacker Drive Gaithersburg, MD 20879 USA T el: +1 (301) 975-1000 F ax: +1 (301) 869-9293 Support: +1 (301) 975-1007 W eb: www .patton.com E-mail: support@patton.com Copyright © 2008, Patton Electronics Company .
3 Summar y T able of Contents 1 General Information ...................................................................................................................................... 17 2 Product Overview ..........................................
4 Contents Summary T able of Contents ......................................................................................................................... 3 Contents ................................................................................
Contents Models 2603, 2621, and 2635 Getting Started Guide 5 Installing an interface cable on the IPLink 2635’s V.35 interface port .......................................................33 Installing the AC power cord ..............................
6 Models 2603, 2621, and 2635 Getting Started Guide Contents Remote Site Configuration .................................................................................................................63 Central site configuration .....................
Contents Models 2603, 2621, and 2635 Getting Started Guide 7 Website Settings ..................................................................................................................................................101 Error Log .............
8 Models 2603, 2621, and 2635 Getting Started Guide Contents T1/E1 Interface ...................................................................................................................................................119 Protocol Support ......
Contents Models 2603, 2621, and 2635 Getting Started Guide 9.
10 List of Figures 1 IPLink Series Router (Model 2635 shown) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 2 Sync Serial Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11 Models 2603, 2621, and 2635 Getting Started Guide 48 New Policy link to configuration webpage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 49 Deleting a Security Policy . . . . . . . . .
12 List of T ables 1 General conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2 Status LED descriptions . . . . . . . . . . . . . . . . . . . . . .
13 About this guide This guide describes installing and configuring P atton Electronics IPLink Series H igh S peed Routers. The instructions in this guide are based on the following assumptions: • .
14 Models 2603, 2621, and 2635 Getting Started Guide About this guide Precautions N otes, cautions, and warnings, which have the following meanings, ar e used throughout this guide to help you become aware of potential problems. W arnings are intended to prev ent safety hazards that could result in per- sonal injury .
15 Models 2603, 2621, and 2635 Getting Started Guide About this guide Safety when working with electricity General observations • Clean the case with a soft slightly moist anti-static cloth • Plac.
16 Models 2603, 2621, and 2635 Getting Started Guide About this guide Factory default parameters IPLink Series H igh S peed Routers have the follo wing factor y default parameters. • Ethernet IP addr ess: 192.168.200.10/24 • W AN Connection: PPP Bridged • Ethernet and serial connections • MDI (LAN connector) • M odel 2621 (X.
17 Chapter 1 General Information Chapter contents IPLink Series High Speed Routers overview ..........................................................................................................18 General attributes ...............................
IPLink Series High Speed Routers overview 18 Models 2603, 2621, and 2635 Getting Started Guide 1 • General Information IPLink Series High Speed Routers overview The IPLink Series of gateway routers/bridges combine full set of high-speed IP routing featur es and W AN access via PPP/IP/FR protocols.
IPLink Series High Speed Routers overview 19 Models 2603, 2621, and 2635 Getting Started Guide 1 • General Information Ethernet • Auto-sensing full-duplex 10B ase-T/100Base-TX Ethernet. • S tandard RJ-45 connector • Built-in MDI-X cross-o ver switch.
IPLink Series High Speed Routers overview 20 Models 2603, 2621, and 2635 Getting Started Guide 1 • General Information • Logging via SYSLOG, and VT -100 console. Console por t set at 9600 bps 8/N/1 settings no flo w control. Security • P acket filtering firewall for controlled access to and from LAN/W AN.
IPLink Series High Speed Routers overview 21 Models 2603, 2621, and 2635 Getting Started Guide 1 • General Information Console port Located on the front panel, the unshielded RJ-45 RS-232 console DC.
IPLink Series High Speed Routers overview 22 Models 2603, 2621, and 2635 Getting Started Guide 1 • General Information • P ower input connector • Ethernet connector • MDI-X switch • W AN port ( V .35, X.21, T1/E1) Power connector A C univ ersal power supply .
IPLink Series High Speed Routers overview 23 Models 2603, 2621, and 2635 Getting Started Guide 1 • General Information.
24 Chapter 2 Product Over view Chapter contents Introduction ..........................................................................................................................................................25 Applications Overview ...........
Introduction 25 Models 2603, 2621, and 2635 Getting Started Guide 2 • Product Overview Introduction The IPLink Series R outer operates as a bridge or a router and has two ports for communication: .
Applications Overview 26 Models 2603, 2621, and 2635 Getting Started Guide 2 • Product Overview Applications Overview P atton ’ s IPLink Gateway routers deliver all the advanced featur es for secure, reliable, and high speed I nternet data connections.
27 Chapter 3 Initial Configuration Chapter contents Hardware installation ............................................................................................................................................28 What you will need ..............
Hardware installation 28 Models 2603, 2621, and 2635 Getting Started Guide 3 • Initial Configuration Hardware installation If you are alr eady familiar with IPLink Series R outer installation and configuration, this chapter will enable you to finish the job quickly .
Hardware installation 29 Models 2603, 2621, and 2635 Getting Started Guide 3 • Initial Configuration Installing an interface cable on the IPLink 2603’ s T1/E1 interface por t The IPLink M odels 2603/K and 2603/T come with a selectable T1/E1 W AN interface (see figure 4 ).
Hardware installation 30 Models 2603, 2621, and 2635 Getting Started Guide 3 • Initial Configuration Figure 6. Rear view of the 2603/K showing location of Ethernet and W AN connectors The interface cable has been installed, go to section “Installing the AC po wer cord ” on page 34.
Hardware installation 31 Models 2603, 2621, and 2635 Getting Started Guide 3 • Initial Configuration Installing an interface cable on the IPLink 2621’ s X.21 interface por t The IPLink M odel 2621 comes with an X.21 interface presented on a female DB-15 connector (see figure 7 ).
Hardware installation 32 Models 2603, 2621, and 2635 Getting Started Guide 3 • Initial Configuration When the local third party equipment is configured as DTE, the M odel 3086 X.21 serial por t can be config- ured as DCE, and a regular straight-thr ough cable can then be used.
Hardware installation 33 Models 2603, 2621, and 2635 Getting Started Guide 3 • Initial Configuration 4. Re-assemble the case. The interface cable has been installed, go to section “Installing the AC po wer cord ” on page 34. Installing an interface cable on the IPLink 2635’ s V .
Hardware installation 34 Models 2603, 2621, and 2635 Getting Started Guide 3 • Initial Configuration Note The IPLink comes with a V .35 cable configured as a tail-circuit. U se this cable to interconnect the IPLink ’ s V .35 por t to a device configur ed as a DCE.
Hardware installation 35 Models 2603, 2621, and 2635 Getting Started Guide 3 • Initial Configuration Figure 12. Power connector location on rear panel (Model 2603/T shown) 3. V erify that the AC power cor d included with your IPLink router is compatible with local standar ds.
Hardware installation 36 Models 2603, 2621, and 2635 Getting Started Guide 3 • Initial Configuration Figure 13. IPLink front panel LEDs and Console port locations (Model 2603 shown) Installing the Ethernet cable Do the follo wing: 1. Connect the DB9-RJ45 adapter to the DB-9 serial port on the PC or dumb terminal.
Hardware installation 37 Models 2603, 2621, and 2635 Getting Started Guide 3 • Initial Configuration 7. A message will display , “Login S uccessful.” By typing the character “?”, all the commands will be displayed. Login: superuser P assword: ********* Login successful --> 8.
Hardware installation 38 Models 2603, 2621, and 2635 Getting Started Guide 3 • Initial Configuration 2. Enter the IPLink router ’ s IP address into the URL or Addr ess field of the browser . T o see the IPLink Series router home page, refer to the following F igures.
Hardware installation 39 Models 2603, 2621, and 2635 Getting Started Guide 3 • Initial Configuration Figure 16. Model 2635 home page.
40 Chapter 4 Ethernet LAN Por t Chapter contents Introduction ..........................................................................................................................................................41 LAN Connections ................
Introduction 41 Models 2603, 2621, and 2635 Getting Started Guide 4 • Ethernet LAN Port Introduction The Ethernet LAN interface/port can be configured with two IP addresses, a primary and a secondar y IP address.
Introduction 42 Models 2603, 2621, and 2635 Getting Started Guide 4 • Ethernet LAN Port Figure 18. Basic Ethernet por t attributes F or additional statistical parameters and a fe w configurable parameters, click on the hyperlink V iew advanced attributes.
Introduction 43 Models 2603, 2621, and 2635 Getting Started Guide 4 • Ethernet LAN Port • F ull Duplex M ode: the default value is ‘ tr ue ’ for Full D uplex operation. Setting it to ‘ false’ configur es the Ethernet port to operate only in half-duplex mode.
44 Chapter 5 Serial Por t Configuration Chapter contents WAN Serial Port Configuration ............................................................................................................................45 Serial Interface ...................
WAN Serial Port Configuration 45 Models 2603, 2621, and 2635 Getting Started Guide 5 • Serial Port Configuration W AN Serial Por t Configuration The IPLink Series routers use a sync.-serial interface (X.21, V .35) or a T1/E1 interface for connection to stan- dard W AN ser vices.
WAN Serial Port Configuration 46 Models 2603, 2621, and 2635 Getting Started Guide 5 • Serial Port Configuration W eb Inter face Configuration The following screen captur e shows the variables av ailable to configure the X.21 serial interface. Figure 21.
WAN Serial Port Configuration 47 Models 2603, 2621, and 2635 Getting Started Guide 5 • Serial Port Configuration Figure 23. Model 2603 T1/E1 W AN por t configuration parameters Configuring the IPLink Series 2603 for T1 Operation W eb Configuration.
WAN Serial Port Configuration 48 Models 2603, 2621, and 2635 Getting Started Guide 5 • Serial Port Configuration T ime Slot Select. F or a T1 using all 24 time slots enter 1-24, for fractional T1 enter in any format for example: 1,2,3,5; or 1-5,10-24.
WAN Serial Port Configuration 49 Models 2603, 2621, and 2635 Getting Started Guide 5 • Serial Port Configuration T ime Slot Select. F or unframed E1 ser vice (Clear Channel) go to the “Line Option ” parameter and select “Clear Channel E1 (G.703).
50 Chapter 6 W AN Ser vices Chapter contents WAN Services .......................................................................................................................................................51 Configuring the IPLink Series 2603 for E1 Operation .
WAN Services 51 Models 2603, 2621, and 2635 Getting Started Guide 6 • WAN Services W AN Ser vices Configuring the IPLink Series 2603 for E1 Operation W eb Configuration. Launch I nternet Explorer or similar web br owser , type the IP address of the 2603, enter username superuser and password superuser .
WAN Service Configuration 52 Models 2603, 2621, and 2635 Getting Started Guide 6 • WAN Services Once all options have been selected, click on the Con fi gure and Activate button at the bottom of the scr een. Additionally , save the configuration by going to the S ystem Configur ation > Save menu.
WAN Service Configuration 53 Models 2603, 2621, and 2635 Getting Started Guide 6 • WAN Services Figure 28. W AN ser vices’ options 4. In the Description field, enter the description y ou wish. This is a mandator y field. W ithout a description, you cannot create the W AN ser vice.
WAN Service Configuration 54 Models 2603, 2621, and 2635 Getting Started Guide 6 • WAN Services 1. Bring up the web-page management system on y our browser by entering the IP addr ess of the IPLink 2. On the M enu, go to Services Configuration , then to WA N .
WAN Service Configuration 55 Models 2603, 2621, and 2635 Getting Started Guide 6 • WAN Services 3. Click on Cr eate a new service in the main windo w , select “PPP routed” and click on the Continue button. In the Description field, enter the description y ou wish.
WAN Service Configuration 56 Models 2603, 2621, and 2635 Getting Started Guide 6 • WAN Services 6. Click on Create . Figure 31. Edit IP address of W AN por t 7.
WAN Service Configuration 57 Models 2603, 2621, and 2635 Getting Started Guide 6 • WAN Services Figure 33. PPP link status Central Site Configuration. If the router at the ISP or Central site is another IPLink series, follow the instruc- tions below .
WAN Service Configuration 58 Models 2603, 2621, and 2635 Getting Started Guide 6 • WAN Services • U sername: [blank] • P assword: [blank] Click on the Create button. 4. Go to Services Configur ation > W AN > Edit... (for PPP routed) > Edit ‘IP Interface ’ > Ipaddr: [enter the W AN IP Address and M ask, in this example = 192.
WAN Service Configuration 59 Models 2603, 2621, and 2635 Getting Started Guide 6 • WAN Services LMI Configuration Options. The F rame Relay Local Management I nterface is configurable through either the CLI or web interface on the IPLink Series. The following variables ar e available for configuration.
WAN Service Configuration 60 Models 2603, 2621, and 2635 Getting Started Guide 6 • WAN Services All LMI configuration variables are contained under the “LMI M anagement” windo w found through the Ser- vices Configur ation >LMI Management link.
WAN Service Configuration 61 Models 2603, 2621, and 2635 Getting Started Guide 6 • WAN Services Frame Relay bridged This application shows configuration for two IPLink units in bridged mode. If using a thir d party router at the Central site, review the router ’ s configuration for connection to a remote bridge.
WAN Service Configuration 62 Models 2603, 2621, and 2635 Getting Started Guide 6 • WAN Services • Encapsulation type : Bridged E ther (Defines the RFC 1490 encapsulation type to be used by the channel. In some instances you may need to choose another type.
WAN Service Configuration 63 Models 2603, 2621, and 2635 Getting Started Guide 6 • WAN Services 4. Enter the description for the circuit in the Description field. This is a mandator y field. W ithout a descrip- tion you cannot create a W AN ser vice.
WAN Service Configuration 64 Models 2603, 2621, and 2635 Getting Started Guide 6 • WAN Services 2. On the M enu, go to Services Configuration , then to WA N . Delete the factory default W AN ser vices alr eady defined. 3. Click on Cr eate a new service in the main windo w , select “ Fr ame Relay routed” and click on Continue.
WAN Service Configuration 65 Models 2603, 2621, and 2635 Getting Started Guide 6 • WAN Services Figure 39. Frame Relay Channel - Routed configuration Edit F rame Relay Channel Enter the appropriate information in the follo wing fields: • Dlci: Consult with your service provider for the DLCI number r equired, in this example use 45.
WAN Service Configuration 66 Models 2603, 2621, and 2635 Getting Started Guide 6 • WAN Services • Cost: 1 • Interface: frame-0 Figure 40. IP route for Frame Relay routed application 12. Click on the U pdate button. This concludes the configuration of the remote site.
WAN Service Configuration 67 Models 2603, 2621, and 2635 Getting Started Guide 6 • WAN Services – Enable NA T on this interface. In this example leave this option blank 5. Click the Create button. 6. Go to System Configur ation > W AN > Edit (for F rame Relay Routed service) > Edit ‘IP Interface ’ 7.
68 Chapter 7 Security Chapter contents Introduction ..........................................................................................................................................................69 Configuring the router ...................
Introduction 69 Models 2603, 2621, and 2635 Getting Started Guide 7 • Security Introduction Security pro vides the ability to setup and enforce security policies. The policies define the types of traffic per- mitted to pass through a gateway , either inbound, outbound, or both, and from which origins the traffic may be allowed to enter .
Configuring the router 70 Models 2603, 2621, and 2635 Getting Started Guide 7 • Security Figure 41. PPP routed W AN ser vice for Security Firewall example 6. Click on Edit in the W AN Connections webpage, and then click on the Edit ‘I p Interface’ hyperlink.
Configuring the security interfaces 71 Models 2603, 2621, and 2635 Getting Started Guide 7 • Security 3. Enter 192.168.101.2 in the box adjacent to Gateway . 4. Leave Destination and N etmask both as 0.0.0.0 because this is the gateway default route.
Configuring the security interfaces 72 Models 2603, 2621, and 2635 Getting Started Guide 7 • Security Figure 44. Security configuration home page 2. Go to the third section (S ecurity Interfaces) on the Security I nterface Configuration webpage. Click on the hyperlink Add interface.
Configuring the security interfaces 73 Models 2603, 2621, and 2635 Getting Started Guide 7 • Security Figure 46. Define ‘ppp-0’ interface as Exter nal Configuring Security Policies Continue the previous example by defining security policies.
Enabling the Firewall 74 Models 2603, 2621, and 2635 Getting Started Guide 7 • Security Deleting a security Policy T o delete a security policy , go to the table of ‘Current S ecurity P olicies ’ and click on the Delete button for the selected security policy .
Security Triggers 75 Models 2603, 2621, and 2635 Getting Started Guide 7 • Security This example continues to allow pings o ver the firewall: 1. F rom the Configuration Menu, > Configuration > Security > Security P olicy Configuration..
Security Triggers 76 Models 2603, 2621, and 2635 Getting Started Guide 7 • Security 4. Set I nbound as Block , but Outbound as Allow . (See figure 51 .
Security Triggers 77 Models 2603, 2621, and 2635 Getting Started Guide 7 • Security Figure 52. Adding trigger for FTP data transfer Y ou should now be able to use FTP commands to pass data between Remote and Local.
Intrusion Detection System (IDS) 78 Models 2603, 2621, and 2635 Getting Started Guide 7 • Security Intrusion Detection System (IDS) The security feature in the IPLink Router pr ovides protection fr om a number of attacks. Some attacks cause a host to be blacklisted (i.
Intrusion Detection System (IDS) 79 Models 2603, 2621, and 2635 Getting Started Guide 7 • Security – Victim P rotection Block Duration:Default = 600 seconds (10 minutes).
Introduction to NAT 80 Models 2603, 2621, and 2635 Getting Started Guide 7 • Security Introduction to NA T The basic steps for configuring NA T are: 1. Enable NA T between the internal and external interfaces of the firewall. 2. Create global addr esses which will be added to the global pool of IP addresses on the W AN inter face.
Introduction to NAT 81 Models 2603, 2621, and 2635 Getting Started Guide 7 • Security Click on Add Global Addr ess P ool button. Figure 53. NA T Global Address Pool configuration 4. N ext, create a reserved mapping between a global IP addr ess from the global pool and a PC on the side of the internal interface (’ip1’).
82 Chapter 8 DHCP and DNS Configuration Chapter contents Introduction ..........................................................................................................................................................83 Services and features normally associated with each other .
Introduction 83 Models 2603, 2621, and 2635 Getting Started Guide 8 • DHCP and DNS Configuration Introduction The routers offer a DHCP Server , DHCP Relay capability , and DNS Relay incorporated into the IPLink. Of the two DHCP features, only one can be enabled at a time-either DHCP server or DHCP relay .
Introduction 84 Models 2603, 2621, and 2635 Getting Started Guide 8 • DHCP and DNS Configuration Some comments on figure 4 . Routed means a ‘routed W AN service’ and Bridged means a ‘bridged W AN service.’ DHCP Server and DHCP Relay cannot be used simultaneously .
Introduction 85 Models 2603, 2621, and 2635 Getting Started Guide 8 • DHCP and DNS Configuration Figure 55. DHCP Ser ver web page The server needs to have a subnet of IP addresses which will be allocated when a DHCP client makes a request. Define the subnet by clicking on the hyperlink Cr eate new Subnet.
Introduction 86 Models 2603, 2621, and 2635 Getting Started Guide 8 • DHCP and DNS Configuration Figure 56. DHCP ser ver configuration web page Parameters for the DHCP Ser ver subnet F our parameters are in the section for defining the DHCP subnet.
Introduction 87 Models 2603, 2621, and 2635 Getting Started Guide 8 • DHCP and DNS Configuration The third parameter is • Get subnet from IP interface: If you use this option, then you will not enter any v alues in the first two parameters.
Introduction 88 Models 2603, 2621, and 2635 Getting Started Guide 8 • DHCP and DNS Configuration Figure 59. Example based on default range of IP address pool DNS ser ver option information When a cl.
Introduction 89 Models 2603, 2621, and 2635 Getting Started Guide 8 • DHCP and DNS Configuration Default gateway option information The IPLink is the gateway all client traffic when U se local host as default gateway is checked (see figur e 61 ).
Introduction 90 Models 2603, 2621, and 2635 Getting Started Guide 8 • DHCP and DNS Configuration • Edit DHCP server list: The IP addresses of DHCP ser v ers can be updated, reset, or deleted from the list. • Add new DHCP server: the IP addresses of the DHCP servers are added to the DHCP relay list in this sec- tion.
Introduction 91 Models 2603, 2621, and 2635 Getting Started Guide 8 • DHCP and DNS Configuration Figure 63. DHCP Relay ser ver list DNS Relay The DNS Relay webpage contains a configurable list of DNS server IP addresses.
Introduction 92 Models 2603, 2621, and 2635 Getting Started Guide 8 • DHCP and DNS Configuration Figure 65. DNS Relay configuration webpage Y ou can change the IP address of the DNS ser vers on the DNS R elay webpage (see figure 66 ) by modifying the IP address requiring the change and clicking on the U pdate button.
93 Chapter 9 IP Ser vices Chapter contents IP Services .............................................................................................................................................................94 WEB Server .........................
IP Services 94 Models 2603, 2621, and 2635 Getting Started Guide 9 • IP Services IP Services Certain System Services can be enabled or disabled. They are DNS Relay , FTP , TFTP , SNMP , and the WEB Server . The importance of disabling any of these ser vices is an issue of security .
IP Services 95 Models 2603, 2621, and 2635 Getting Started Guide 9 • IP Services Associated Ports for the different System (IP) Ser vices This section is for information purposes only . Consult the table to identify which ports are associated with the different System (IP) S ervices.
96 Chapter 10 System Configuration Chapter contents Introduction ..........................................................................................................................................................97 Authentication .............
Introduction 97 Models 2603, 2621, and 2635 Getting Started Guide 10 • System Configuration Introduction The System Configur ation item on the Configuration M enu opens to provide access to twelve (12) differ ent items. They are: • Authentication: allo ws you to control access to the IPLink ’ s console and web configuration pages.
Alarm 98 Models 2603, 2621, and 2635 Getting Started Guide 10 • System Configuration • creating a U sername • defining the P assword • give the user ability to configure the IPLink or r ead-only authority • add a comment useful to the administrator Figure 69.
Remote Access 99 Models 2603, 2621, and 2635 Getting Started Guide 10 • System Configuration remain. Only by clicking on the R eset button can you clear the alarm and reset the Time and Count parame- ters.
Update 100 Models 2603, 2621, and 2635 Getting Started Guide 10 • System Configuration Update T o upgrade the IPLink to another software version, select the software image by clicking on the B rowse button. The software is a ‘.tar ’ file. (See figure 73 .
Restart 101 Models 2603, 2621, and 2635 Getting Started Guide 10 • System Configuration Figure 75. Saving or reloading previously saved configuration files Restart F rom this webpage, you can do a soft reboot of the IPLink or restor e the IPLink to factor y defaults.
Error Log 102 Models 2603, 2621, and 2635 Getting Started Guide 10 • System Configuration Error Log The Error Log webpage sho ws recent configuration errors and pro vides for the configuration of the Syslog. (See figure 78 .) T wo parameters are configurable for the Syslog.
System Tools 103 Models 2603, 2621, and 2635 Getting Started Guide 10 • System Configuration Figure 79. SNMP Daemon configuration The T rap T able identifies the IP address of the SNMP trap along with its password. System T ools The System T ools webpage provides two utilities for testing network connectivity .
104 Chapter 11 SNTP Client Configuration Chapter contents Introduction ........................................................................................................................................................105 Configuring the SNTP Client .
Introduction 105 Models 2603, 2621, and 2635 Getting Started Guide 11 • SNTP Client Configuration Introduction The Simple N etwork Time P rotocol (SNTP) Client webpage contains the configurable parameters for either setting up the SNTP client or , in the abscence of an SNTP ser ver , setting the internal clock.
System Clock Setting 106 Models 2603, 2621, and 2635 Getting Started Guide 11 • SNTP Client Configuration SNTP Client General Configuration Parameters The general configuration parameters for the SNTP client are for selecting your timezone and setting the poll- ing parameters for the client’ s transmit packets.
System Clock Setting 107 Models 2603, 2621, and 2635 Getting Started Guide 11 • SNTP Client Configuration Figure 83. Configuration of the internal system calendar clock After entering the system clock values, click on the Set Clock button to sav e in volatile memory .
108 Chapter 12 System Status Chapter contents System Status .......................................................................................................................................................109 Port Connection Status .............
System Status 109 Models 2603, 2621, and 2635 Getting Started Guide 12 • System Status System Status A quick but thorough summary of the IPLink ’ s status is provided on this w ebpage, but it also has links to the detailed webpages for the key subsystems of the IPLink.
System Status 110 Models 2603, 2621, and 2635 Getting Started Guide 12 • System Status LAN Status There are two hyperlinks, LAN Settings... and DHCP Server Settings... , which go to the ‘LAN Connections ’ and ‘DHCP Server’ w ebpages, respectively .
Status LEDs 111 Models 2603, 2621, and 2635 Getting Started Guide 12 • System Status Status LEDs The LEDs indicate the status of the P ower , the W AN, Sync S erial port, and the Ethernet connection. All LED indicators will present the same looking profile (e.
112 Chapter 13 Contacting Patton for assistance Chapter contents Introduction ........................................................................................................................................................113 Contact information .
Introduction 113 Models 2603, 2621, and 2635 Getting Started Guide 13 • Contacting Patton for assistance Introduction This chapter contains the following information: • “Contact information ”—describes how to contact P A TTON technical support for assistance.
Warranty Service and Returned Merchandise Authorizations (RMAs) 114 Models 2603, 2621, and 2635 Getting Started Guide 13 • Contacting Patton for assistance Out-of-warranty ser vice P atton ser vices what we sell, no matter ho w you acquired it, including malfunctioning products that ar e no longer under warranty .
115 Appendix A Compliance infor mation Chapter contents Compliance .........................................................................................................................................................116 EMC .......................
Compliance 116 Models 2603, 2621, and 2635 Getting Started Guide A • Compliance information Compliance EMC • FCC P ar t 15, Class A • EN55022, Class A • EN55024 Safety • UL60950-1/CSA C22.2 N o. 60950-1 • IEC/EN 60950-1 • AS/NZS 60950-1 PSTN Regulatory • These devices are not intended for connection to the PSTN.
Authorized European Representative 117 Models 2603, 2621, and 2635 Getting Started Guide A • Compliance information Authorized European Representative D R M G reen Eur opean Compliance Services Limited.
118 Appendix B Specifications Chapter contents General Characteristics ........................................................................................................................................119 Ethernet ..............................
General Characteristics 119 Models 2603, 2621, and 2635 Getting Started Guide B • Specifications General Characteristics • Compact low-cost router/bridge • 10/100 Ethernet • U nlimited host suppor t. • Comprehensive har dware diagnostics, works with any operating system, easy maintenance and effortless installation.
Protocol Support 120 Models 2603, 2621, and 2635 Getting Started Guide B • Specifications Protocol Support • Complete internetworking with IP (RFC 741), TCP (RFC 793), UDP (RFC 768), ICMP (RFC 950), ARP (RFC 826).
Security 121 Models 2603, 2621, and 2635 Getting Started Guide B • Specifications Security • P acket filtering firewall for controlled access to and from LAN/W AN. Support for 255 rules in 32 filter sets. 16 individual connection profiles. • DoS Detection/pr otection.
122 Appendix C Cable Recommendations Chapter contents Ethernet Cable ....................................................................................................................................................123 Adapter ......................
Ethernet Cable 123 Models 2603, 2621, and 2635 Getting Started Guide C • Cable Recommendations Ethernet Cable Ethernet cable (P/N 10-2500) (r efer to “RJ-45 shielded 10/100 Ethernet port ” on pa.
124 Appendix D IPLink Physical Connectors Chapter contents RJ-45 shielded 10/100 Ethernet port ...................................................................................................................125 RJ-45 non-shielded RS-232 console port (EIA-561) .
RJ-45 shielded 10/100 Ethernet port 125 Models 2603, 2621, and 2635 Getting Started Guide D • IPLink Physical Connectors RJ-45 shielded 10/100 Ethernet port Assuming the MDI-X switch is in the out position. RJ-45 non-shielded RS-232 console port (EIA-561) The RS-232 serial control port of the IPLink is configured to operate as a DCE.
Serial port 126 Models 2603, 2621, and 2635 Getting Started Guide D • IPLink Physical Connectors Serial port V .35 (M/34 and DB-25 Connector) The M odel 2635 has a DB-25 connector for the V .35 interface. table 9 provides the pinouts for the M/34 and DB-25 connectors.
Serial port 127 Models 2603, 2621, and 2635 Getting Started Guide D • IPLink Physical Connectors X.21 (DB-15 Connector) The X.21 interface in the Model 2621 may be configur ed for either DTE or DCE. Default is DCE. Figure 85. X.21 DB-15 connector T able 10.
Serial port 128 Models 2603, 2621, and 2635 Getting Started Guide D • IPLink Physical Connectors E1/T1 (RJ-48C Connector) The T1/E1 transmit signals are not polarity sensitive, even though they have the traditional designation of Tip and Ring. Figure 86.
129 Appendix E Command Line Inter face (CLI) Operation Chapter contents Introduction ........................................................................................................................................................130 CLI Terminology .
Introduction 130 Models 2603, 2621, and 2635 Getting Started Guide E • Command Line Interface (CLI) Operation Introduction The modem configuration and status can also be view and modified through the console, which is accessible through the RS-232 serial port or through a T elnet session over E thernet.
CLI Terminology 131 Models 2603, 2621, and 2635 Getting Started Guide E • Command Line Interface (CLI) Operation By entering a keywor d followed b y a space and “?” the options available will print immediately without press- ing enter . The previously entered commands are r eprinted on the next lines.
Administering user accounts 132 Models 2603, 2621, and 2635 Getting Started Guide E • Command Line Interface (CLI) Operation ip interface ip1 list secondaryipaddresses <enter> Secondary IP addresses for interface: ip1 ID | IP Address -----|----------------- ----------------------- In this example there was not a secondary IP address.
Administering user accounts 133 Models 2603, 2621, and 2635 Getting Started Guide E • Command Line Interface (CLI) Operation Note N o check is made for any current passwor d which may have been set for the user .
デバイスPatton electronic 2635の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Patton electronic 2635をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPatton electronic 2635の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Patton electronic 2635の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Patton electronic 2635で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Patton electronic 2635を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPatton electronic 2635の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Patton electronic 2635に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPatton electronic 2635デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。