Patton electronicメーカー3086の使用説明書/サービス説明書
ページ先へ移動 of 196
Model 3086 G.SHDSL Integrated Access Device User Guide Sales Office: +1 (301) 97 5-1000 Techni cal Su ppor t: +1 (301) 97 5-1007 E-mail: suppor t@patton.com WWW: www .patton.com Part Number: 07M3086, R ev . E Revised : February 16, 2012 Impor tant This is a Class A de vice and is intended for use in a light ind ustrial environment.
Patton Electronics Company , Inc. 7622 Ric kenbacker Drive Gaithersburg , MD 20879 USA tel: +1 (301) 97 5-1000 fax: +1 (301) 869 -9293 support: +1 (301) 975-10 07 web: www.patton .com e-mail: support@p atton.com Copyright © 2012, Patton Electr onics Company .
3 Contents Contents .... ...... ...... ......... ...... ..... ...... ......... ...... ..... ...... ...... ......... ...... ..... ...... ......... ...... ... ... ..... ...... ...... ......... ...... 3 About this guide ....... ...... ...... ..... ......
Conte nts Model 3086 G.SHDSL Integrated Access Device User Guide 4 Hardware instal lation ............... ........... ........... ................. ........... ............ ........... ........... ....... .... ............ ........... .......28 What you will need .
5 Model 3086 G.SHDSL Integrated Access Device User Guide Conte nts Switch Bank S3 ............ ................ ............ ........... ........... ............ ................. ........... .......... . ........... ...... .......51 Switch S3-1: CO/CP sel ection .
Conte nts Model 3086 G.SHDSL Integrated Access Device User Guide 6 PCM Mode ...... ................. ........... ............ ........... ........... ................. ............ ........... .......... . ........... ............ . 63 PCM Transmit P olarity .
7 Model 3086 G.SHDSL Integrated Access Device User Guide Conte nts Software Upgrades .................... ........... ........... ........... ............ ................. ........... ........... ...... ........... ........... ...........136 Configuration .
Conte nts Model 3086 G.SHDSL Integrated Access Device User Guide 8 PPP Support ................. ............ ........... ................. ........... ........... ............ ........... .............. ... ......... ........ ........... .....154 ATM Protocols.
9 Model 3086 G.SHDSL Integrated Access Device User Guide Conte nts managementType: ( Default Value: no_ maintenance) ........... ........... ............ ........... ........... ........... ...........1 73 MgtState ..... ........... ................. .
Conte nts Model 3086 G.SHDSL Integrated Access Device User Guide 10 Channel Segment S ize ............. ........... ................. ........... ............ ........... ........... ................. ... ........ ...........190 DLCI: Data Link Connection Identifier .
11 About this guide This guid e descri bes in stalling and co nfiguri ng a Patton Electr onics Mode l 3086 G.SHDSL Int egrated Acce ss Device ( IAD). The instruc tions in this guide are b ased on the .
About this guide Model 3086 G.SHDSL Integrated Access Devi ce User Guide 12 Precau tions Notes and ca ution s, wh ich hav e the fol lowin g mean ings, are used throughout this guide to help you become aware of potential IAD problems. Warnings relate to p ersonal injury issues, and Cautions refer to potential property d amage.
13 Model 3086 G.SHDSL Integrated Access Device User Guide About this guide Safety when working wi th electricity Factory default parameters The Model 3086 G.SHDSL IAD has the following factory default parame ters. • Ethernet IP add ress: 192.168. 200.
About this guide Model 3086 G.SHDSL Integrated Access Devi ce User Guide 14 T ypographic al conventions used in this document This section de scribes th e typographical con ventions and terms use d in this guide.
15 Chapter 1 General I nformation Chapter cont ents Model 3086 G.SHDSL IAD overview ...... ............ ........... ................. ........... ............ ........... ........... ..... ............ .......16 General attribut es ...................
1 • General In formatio n Model 3086 G.SHDSL Integrated Access Devi ce User Guide 16 Model 3086 G.SHDSL IAD overv iew Model 3086 G.SHD SL IAD over view The Model 30 86 is a G.SHSDSL Int egrated Acce ss Device t hat combines high-speed IP routing and acce ss via ATM/FR/PPP along with TD M data acces s.
Model 3086 G.SHDSL IAD overvi ew 17 Model 3086 G.SHDSL Integrated Access Device User Guide 1 • Ge nera l Info rma tion • Standa rd 1 year warran ty. • Convenient and standard RJ connectors for Ethernet, Line, and Console. G.SH DSL Ch aract eris ti cs • Full dupl ex 2.
1 • General In formatio n Model 3086 G.SHDSL Integrated Access Devi ce User Guide 18 Model 3086 G.SHDSL IAD overv iew PPP Suppo rt • Point-to -Point P rotocol over HD LC • PPPoA (RFC 2364) Point-to-Point Protoc ol over ATM. • PPPoE (RFC 2516) C lient for autonomous net work connectio n.
Model 3086 G.SHDSL IAD overvi ew 19 Model 3086 G.SHDSL Integrated Access Device User Guide 1 • Ge nera l Info rma tion • SNMPv1 (RFC 1157) MIB II (RFC 1213) • Quick Start Se tup runs through common o ptions to simplify circ uit turn-up. • Logging via S YSLOG, and VT-100 c onsol e.
1 • General In formatio n Model 3086 G.SHDSL Integrated Access Devi ce User Guide 20 Model 3086 G.SHDSL IAD overv iew The t est m ode switches are : • Normal, Local, and Remote Loopbacks • Normal, 511, and 511E pse udo-random bi t patte rns Table 3.
Model 3086 G.SHDSL IAD overvi ew 21 Model 3086 G.SHDSL Integrated Access Device User Guide 1 • Ge nera l Info rma tion Console po rt (outline d in red) The unshie lded RJ-45 RS-232 c onsole DCE po r.
1 • General In formatio n Model 3086 G.SHDSL Integrated Access Devi ce User Guide 22 Model 3086 G.SHDSL IAD overv iew Ethernet por t (outlined in gr een) Shielded RJ- 45 10Base-T/10 0Base-TX Ether net por t using pi ns 1,2,3, & 6. See MDI-X switc h for hub o r transceiv er configuration.
23 Chapter 2 Product Over view Chapter cont ents Product Overview..................... ........... ................. ........... ........... ............ ........... ................. ........... ................. .......24 Applications Overvi ew ....
2 • Produc t Overvie w Model 3086 G.SHDSL Integrated Access Devi ce User Guide 24 Product Overview Product Overview The Model 3086 IAD operates as a bridge or a router and has three ports for communication: • The Et hernet port—C onnects to the LAN side of the c onnection • The Line port—Pro vides the G.
Product Overview 25 Model 3086 G.SHDSL Integrated Access Device User Guide 2 • Pro duct Ove rview Internet/Extrane t Access While Fr ame Relay (FR) rema ins the most ec onomical ser vice to conne ct.
2 • Produc t Overvie w Model 3086 G.SHDSL Integrated Access Devi ce User Guide 26 Product Overview PCM enco ded voice fro m a PBX are car ried in sp lit-DSL- bandwidth mode to a Central Office.
27 Chapter 3 Quick Star t Installation Chapter cont ents Hardware instal lation ............... ........... ........... ................. ........... ............ ........... ........... ....... .... ............ ........... .......28 What you will need .
3 • Quic k Start Install ation Model 3086 G.SHDSL Integrated Access Devi ce User Guide 28 Hardware installation Hardware instal lation If you are already f amiliar w ith Model 3086 IAD instal lation and configurat ion, thi s chapter wi ll enabl e you to finish the job quickly.
Hardware installation 29 Model 3086 G.SHDSL Integrated Access Device User Guide 3 • Quick Start Installation 2. Verify that t he AC power c ord incl uded with your 3 086 is c ompatible wi th local st andards.
3 • Quic k Start Install ation Model 3086 G.SHDSL Integrated Access Devi ce User Guide 30 Hardware installation IP ad dres s Quic k Sta rt modif ic ati on The first parame ter to change is the IP ad dress from the default IP addres s of 1 92.168.1.1/24 ( for the CP units) or 192.
Hardware installation 31 Model 3086 G.SHDSL Integrated Access Device User Guide 3 • Quick Start Installation The Mode l 3086 home p age di splays (s ee Figure 3). Figure 3. Model 3086 home page The Mode l 3086 menu st ructure is shown i n figure 4 on page 32.
3 • Quic k Start Install ation Model 3086 G.SHDSL Integrated Access Devi ce User Guide 32 Hardware installation Figure 4. Model 308 6 Menu Structure.
33 Chapter 4 Basic Application Configurations Chapter cont ents Introduction ....................... ........... ........... ............ ........... ........... ................. ............ ....... ......... ............ ........... .......36 TDM Port .
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 34 Switch S3-8 .................. ........... ............ ........... ........... ................. ............ ........... ........... .. ......... ....
35 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Line Probe ........ ............ ........... ................. ........... ........... ............ ........... ................. ........... ..........
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 36 Introduction Intr oduction The Model 3086 IAD comes with two data ports: a TDM (V.
TDM Port 37 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations The following tabl e shows the paramete rs that can be configured v ia the HTTP serve r using a web browser. TDM P ort Model 3086 units e nable V.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 38 TDM Port sented o n a female D B-15 con nector, whil e the T1/E1 interface i s presented o n an RJ-48C jack, addition ally the E1 inter face is pres ented on du al BNC.
V.35 and X.21 Ports 39 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations V .35 and X.21 Po rts The ser ial port in the 3086 is simpl e to install . The V.35 in terface is wired as a DCE, the X.21 interf ace can be configured as a DCE (factory default), or as a DTE via internal configuration jumper.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 40 V.35 and X.21 Ports 2. Locate th e small dau ghter bo ard on the 3086 board betwee n the DSL po rt (RJ- 45) conne ctor and t he seria l port connect or ( Figure 7 s hows locati on of DTE/D CE daughter boar d).
V.35 and X.21 Ports 41 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Switch co nfigurati on: Switch c onfiguratio n in the 3 086 is to be used i n situatio ns where t he 3086 fu nctions as a DSL modem car rying TDM (X.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 42 V.35 and X.21 Ports Switch Bank S2 Table 4 shows the default configur ation for s witch S2 . A descri ption o f S2 opt ions fol lows the t able. Switches S2-1 through S2-7.
V.35 and X.21 Ports 43 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Switch S2-8. S2-8 activates c onfigurat ion of Model 3086 vi a DIP switches.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 44 T1 Interface installed at a Central Office should be set to CO . For po int-to-point operation, one unit mu st be CO while the other m ust be CP . Switch S3-3: Transmit Clock Mode.
T1 Interface 45 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations T1 Inter face Configu ration The 3086 T 1 interfa ce can be configur ed via DIP switche s, HTTP/SNMP, or command line int erface (CL I). This se ction disc usse s DIP switche s and HTTP ( web serv er) co nfigurati on.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 46 T1 Interface Switches S2-1 through S2-7. U se Switches S2-1 th rough S2-7 to set the data rate (see Table 5 on page 43. Each posi tion represe nts nx64 settings.
T1 Interface 47 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Switch Bank S3 The table be low sh ows the defau lt confi guratio n for s witch S3. A desc ripti on of S3 option s follow s this t able . Switch S3-1: CO/CP sele ction.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 48 T1 Interface Switch S3-6: A nnex. Annex A and B offer spectr al compatibi lity with T 1 and E1 signal s resp ectiv ely, this fea - ture reduces the interference betwe en DSL lines and ad jacent E1or T1 lines .
E1 Interface 49 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Line Bui ld Out: Select f rom 100 ohm ( 0dB), 100 o hm (-7.5dB ), 100 ohm ( -15dB), and 10 0 ohm (-22.5 dB). For CSU/DSU appl ication u se 100 0dB option, co nsult your T1 servi ce provid er for mor e informat ion.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 50 E1 Interface informatio n and cable req uirements. If the E1 c onnect ion is made via t he BNC co nnecto rs, connect the TX BNC of the 3086 to Reci ve (RX) BNC o f the local E 1 devic e, and vice v ersa.
E1 Interface 51 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Switch S2-8. S2-8 activates c onfigurat ion of Model 3086 vi a DIP switches.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 52 E1 Interface installed at a Central Office should be set to CO . For p oint-to-poin t operation, o ne unit must be C O while the other m ust be CP. Switch S3-3: Transmit Clock Mode.
E1 Interface 53 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Web Interface Co nfiguration Launch Inter net Explorer or s imilar web bro wser, type the IP address of the 2 603, enter username ‘ superuser’ and p assword ‘super user’.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 54 Using the 3086 as a si mple modem (TDM data over DSL) Using the 3086 as a simple modem (TDM data over DSL) Serial port connection only, Ethernet port not used to send data over DSL but can be used for management.
Using the 3086 as a si mple modem (TDM data over DSL ) 55 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations fi gshdsl set pcmmode Serial fi gshdsl set g.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 56 Using the 3086 as a si mple modem (TDM data over DSL) W eb br owser confi gur ati on From the main menu i n the 3086, s elect GSHDS L > Confi gur ati on .
Using the 3086 as a si mple modem (TDM data over DSL ) 57 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Intended Serial In terface Data Rate Selects the data rate assigned to the serial po rt in nx64 kbps increm ents from 64 kbps to a maximum of 2.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 58 TDM Plus Ethernet Tra ffic Interface Type Selects betwe en HDLC or ATM tran sports. This sett ing must match the transport selecte d in the “WAN con - nection” menu.
TDM Plus Ethernet Traf fic 59 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations CLI configur ation Configuring the 30 86 to transport TDM and IP data c oncurrently requires use o f a Laptop or PC terminal.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 60 TDM Plus Ethernet Tra ffic • For 3086 A at the prompt type gshdsl set terminal central <enter> • For 3086 B type fi gshdsl set terminal remote Interface Type Select s betwee n HDLC and ATM transp ort.
TDM Plus Ethernet Traf fic 61 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations figuration optio n”. Use the drop down m enus to enter the required c onfiguration. Once all settings have been selected, cl ick on the Configure button at the bottom o f the screen.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 62 TDM Plus Ethernet Tra ffic Intended Serial In terface Data Rate Selects the data rate assigned to the serial po rt in nx64 kbps increm ents from 64 kbps to a maximum of 2.
TDM Plus Ethernet Traf fic 63 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Interface Type Selects betwe en HDLC or ATM tran sports. This sett ing must match the transport selecte d in the “WAN con - nection” menu.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 64 Using the 3086 i n Routed or Bridged appli cations Using the 3086 in Routed or Bridged appl ications .
Using th e 3086 i n Routed o r Bridge d applic ations 65 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Verify the settings to be: –I n t e r f a c e.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 66 Using the 3086 i n Routed or Bridged appli cations Change Terminal Type to Central and Interface Type to hd lc . Click on the Configure button. In the Action submenu und er G.
Using th e 3086 i n Routed o r Bridge d applic ations 67 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations – LLC header mode = off –H D L C h e a d e r m o d e = o n – No authentica tion – Leave User name and Passw ord blank.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 68 Using the 3086 i n Routed or Bridged appli cations 1. Now you can br ing up the web-page management syst em on your br owser by ent ering th e IP addres s of the 3086 .
Using th e 3086 i n Routed o r Bridge d applic ations 69 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Clic k on Conf igure .
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 70 Using the 3086 i n Routed or Bridged appli cations 4.
Using th e 3086 i n Routed o r Bridge d applic ations 71 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations 5. Go to G.SHDSL in the Configurati on Menu, then the submenu Stat us. The Mod em Stat e shoul d be “deactivated.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 72 Using the 3086 i n Routed or Bridged appli cations Clic k on G.SHDSL in the Configur ation Menu > Conf iguration > verif y that Ter minal Type is re mote and Interface Type is “ hd lc .
DSLAM Connections with remote CPE uni ts 73 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations –C o s t : 1 –I n t e r f a c e : [ b l a n k ] 5. Go to G.SHDSL in the Configuration Menu, then the submenu Status .
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 74 DSLAM Connections with remote CPE units Model 30 86 (Remote) Configura tion Steps (RFC 148 3 Bridged).
DSLAM Connections with remote CPE uni ts 75 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Change Terminal Type to Remote and Interface Type to atm . C lick on the Configure button. In the Action submenu und er G.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 76 DSLAM Connections with remote CPE units Leave VCI as 35 and Encapsulation Method as LLC/SNAP. Then click on Ap ply . 3. Go to G.SHDSL in the Config uration Menu, then the submenu Configur ation.
DSLAM Connections with remote CPE uni ts 77 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Clic k on Create a new service in the main window, select PPPoH_ Bridged and click on the Configure button. In the Descri ption field, enter the d escription you wi sh.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 78 DSLAM Connections with remote CPE units Model 30 86 (Central) Configu ration Steps (PPP oH Bridged) F.
DSLAM Connections with remote CPE uni ts 79 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations PPPoA Bridged (RFC 2364 ) Configuration The user data for tr ansmission is in the form of IP packets but encapsulated in a PPP packet, transmitted an d received thro ugh a PPP session to the c onnection.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 80 DSLAM Connections with remote CPE units –V P I = 0 – VCI = 300 – LLC header mode = off –H D L C h e a d e r m o d e = o f f – No authentica tion – Leave User name and Passw ord blank.
DSLAM Connections with remote CPE uni ts 81 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations – No authentica tion – Leave User name and Passw ord blank. Clic k on Apply . 3. Go to G.SHDSL in the Config uration Menu, then the submenu Configur ation.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 82 DSLAM Connections with remote CPE units 1. Now you can br ing up the web-page management syst em on your br owser by ent ering th e IP addres s of the 3086 .
DSLAM Connections with remote CPE uni ts 83 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations In the Descri ption field, enter the description you wish. In this exam ple, it is called RFC 14 83 Routed . Change the configuratio n parameters to match the fo llowing.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 84 DSLAM Connections with remote CPE units The othe r fields should b e: – Destination:0.0.0.0 – Gateway:192.168.1 64.3 – Mask:0.0.0.0 –C o s t : 1 –I n t e r f a c e : [ b l a n k ] 4.
DSLAM Connections with remote CPE uni ts 85 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Change the IP address so it is in the same subnet as the laptop PC. The laptop’s IP address is 192.168.172. 229, so i n this ex ample, change the IP address of the 3086 t o 192.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 86 DSLAM Connections with remote CPE units Click on Action > Select de activate fo r Action > Cl ick on the Acti on button. 2. On the Menu, go to Configuration, then to WAN C onnections.
DSLAM Connections with remote CPE uni ts 87 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations 3. Configuration Menu > Configur ation > IP Routes >.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 88 DSLAM Connections with remote CPE units 4. Go to G.SHDSL in the Configurati on Menu, then the submenu Stat us. The Modem S tate sh ould be “deactivated.
DSLAM Connections with remote CPE uni ts 89 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations One IP interface was called ip1 with an IP ad dress of 1 92.16 8.1.1 Change it to an IP address whi ch is in the same subne t as the Desk top PC.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 90 DSLAM Connections with remote CPE units –U s e r n a m e : [ b l a n k ] – Password :[blank] Clic k on Conf igure .
DSLAM Connections with remote CPE uni ts 91 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations 4. Configuration Menu > Configur ation > IP Routes >.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 92 DSLAM Connections with remote CPE units 5. Go to G.SHDSL in the Configurati on Menu, then the submenu Stat us. The Modem S tate sh ould be “deactivated.
DSLAM Connections with remote CPE uni ts 93 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations 1. Now you can br ing up the web-page management syst em on your br owser by ent ering th e IP addres s of the 3086 .
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 94 DSLAM Connections with remote CPE units 3. Go to Configuration Menu > Configuration > WAN co nnections > Edit (for PPPoH Routed servic e) > Edit ‘IP Inte rface’ > Ipad dr: [enter the WAN IP Address , in thi s example = 192.
DSLAM Connections with remote CPE uni ts 95 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations PPPoA Routed (RFC 2364) This ro uted appl ication is v ery simil ar to the PPPoA Bridged applicat ion.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 96 DSLAM Connections with remote CPE units Now you can br ing up the web-page management syst em on your br owser by ent ering th e IP addres s of the 3086 .
DSLAM Connections with remote CPE uni ts 97 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations 3. In the Configuration Menu, click on Configuration then &g.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 98 DSLAM Connections with remote CPE units – Discove r Primar y DNS:true –D i s c o v e r S e c o n d a r y D N S : t r u e – Give DNS to Relay:true – Give DNS to Client:t rue – Remote DNS:0 .
DSLAM Connections with remote CPE uni ts 99 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations –C l a s s : U B R –P o r t : a t m Clic k on th e Change b utton if ch anges were m ade. 5. Click on E dit ‘IP Inte rface.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 100 DSLAM Connections with remote CPE units Now you can br ing up the web-page management syst em on your br owser by ent ering th e IP addres s of the 3086 .
DSLAM Connections with remote CPE uni ts 101 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations In the Description field, enter the description you wish. In this example, it is called PPP oA Ro ute d . Change the configuratio n parameters to match the fo llowing.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 102 DSLAM Connections with remote CPE units 3. In the Configuration Menu, click on Configuration then &g.
DSLAM Connections with remote CPE uni ts 103 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations – IP Addr from IPCP: true – Disco ver Primar y DNS: false –D i s c o v e r S e c o n d a r y D N S : false – Give DNS to Relay: false – Give DNS to Client: f alse – Remote DNS: 0 .
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 104 DSLAM Connections with remote CPE units Clic k on Chang e button.
DSLAM Connections with remote CPE uni ts 105 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations 4. Click on E dit ‘ATM Channel.
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 106 DSLAM Connections with remote CPE units 5. Click on E dit ‘IP Inte rface.’ Verif y or ch ange if necess ary th e foll owing O ptions para meter s. – Ipaddr:1 92.
DSLAM Connections with remote CPE uni ts 107 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations 7. From the Con figuration Menu, click on Configuration > Authenticati on > Create a new user > enter the information fo r the following parameters in the web p age Details for the new user .
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 108 DSLAM Connections with remote CPE units 1. Now you can br ing up the web-page management syst em on your br owser by ent ering th e IP addres s of the 3086 .
DSLAM Connections with remote CPE uni ts 109 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations 3. Returning to the 3 086 Configuration Menu, cl ick on Conf iguration, th en IP Routes. – Click on “Create new Ip V4 Route .
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 110 DSLAM Connections with remote CPE units 4. Go to G.SHDSL in the Config uration Menu, then the submenu Configur ation. Change Terminal Type to Centra l and Interface Type to atm .
DSLAM Connections with remote CPE uni ts 111 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Return to Action, select S tart and click on Actio n .
4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 112 DSLAM Connections with remote CPE units 3. Returning to the 3 086 Configuration Menu, cl ick on Conf iguration, th en IP Routes. Click on “Create new Ip V4 Route.
113 Chapter 5 Specialized Configura tions Chapter cont ents IP Configurat ions ......... ............ ........... ........... ................. ........... ............ ........... ........... ..... ...... ................. ...........114 Router ... .
5 • Speciali zed Con figurat ions Model 3086 G.SHDSL Integrated Access Devi ce User Guide 114 IP C onfi gur ations IP Configuratio ns Router RIP and RIPv2 Static Route 1. Click on > Configuration, then > IP Routes on the Configuration Menu. 2.
IP Conf igurat ions 115 Model 3086 G.SHDSL Integrated Access Device User Guide 5 • S peciali zed Con fig urations At the bottom o f the web page are thre e options for the D HCP Server Mo de: Disabled, DH CP server (default), and DH CP Relay Agent. 2.
5 • Speciali zed Con figurat ions Model 3086 G.SHDSL Integrated Access Devi ce User Guide 116 IP C onfi gur ations 4. The IAD may be used as a DHCP Relay Agent if desi red. Go to > Configuration Menu > Configuration > DHCP Server. Se lect DHCP Relay Agent at the bo tt om of the w eb page and clic k on Config ure.
IP Conf igurat ions 117 Model 3086 G.SHDSL Integrated Access Device User Guide 5 • S peciali zed Con fig urations DNS Relay Mo de In the DNS Relay we b page, up t o 10 DNS ser ver addre sses may be added to utilize the DNS servers already being use d by the net work.
5 • Speciali zed Con figurat ions Model 3086 G.SHDSL Integrated Access Devi ce User Guide 118 IP C onfi gur ations.
119 Chapter 6 Security Chapter cont ents Introduction ....................... ........... ........... ............ ........... ........... ................. ............ ....... ......... ............ ........... .....120 Configuring the IAD .........
6 • Security Model 3086 G.SHDSL Integrated Access Devi ce User Guide 120 Introduction Intr oduction Security provides the ability to setup and enforce se curity policie s.
Configuring the security interface s 121 Model 3086 G.SHDSL Integrated Access Device User Guide 6 • Security The next step in conf iguring the IAD is adding the default gateway route. Sinc e the WAN IP address of the 3086 mode m at the CO s ite is 192.
6 • Security Model 3086 G.SHDSL Integrated Access Devi ce User Guide 122 Configuring the security interfaces 4. Add one more se curity interf ace by rep eating s tep 2. 5. Selec t Name of t he LAN p ort ( ip1 ) and Interface Type to be inte rnal . Click on Apply .
Enabling the Firewall 123 Model 3086 G.SHDSL Integrated Access Device User Guide 6 • Security Firewall Po licies: ID | Name | Type 1 | Type 2 | Validator Allow Only ---------------------------------.
6 • Security Model 3086 G.SHDSL Integrated Access Devi ce User Guide 124 Security Tr iggers To allow pings betwe en the two PCs: 1. From the Configuration Menu, > Config uration > Security > Firewall Policy Configuration > Port Filters > Add Raw IP Filter 2.
Security Triggers 125 Model 3086 G.SHDSL Integrated Access Device User Guide 6 • Security After co nfiguring t he FTP po rtfilt er, you can open an ft p sessi on from Re mote to Local, however you c an issue ftp commands (e.g., login, cd, etc.) but transfer data (e.
6 • Security Model 3086 G.SHDSL Integrated Access Devi ce User Guide 126 Intrusion Detection System (IDS) Int rusio n Det ecti on S ystem ( IDS) The s ecuri ty fea ture i n the 3086 IAD p rovi des pr otect ion fr om a numbe r of attac ks. So me attac ks caus e a ho st to be blac klisted (i.
Intrusion Det ection System (I DS) 127 Model 3086 G.SHDSL Integrated Access Device User Guide 6 • Security Sets the dur ation for blo cking all suspic ious hosts . The fire wall dete cts when the system is being scanned by a suspicious host attemp ting to identify any open ports.
6 • Security Model 3086 G.SHDSL Integrated Access Devi ce User Guide 128 Intrusion Detection System (IDS).
129 Chapter 7 NA T (Network Address T ranslation) Chapter cont ents Introduction ....................... ........... ........... ............ ........... ........... ................. ............ ....... ......... ............ ........... .....130 Enabling NAT .
7 • NAT (Network Address Transl ation) Model 3086 G.SHDSL Integrated Access Devi ce User Guide 130 Introduction Intr oduction The basi c step s for co nfigur ing NAT are : 1. Enable NAT betwe en the internal and external in terfaces of the fi rewall.
Introduction 131 Model 3086 G.SHDSL Integrated Access Device User Guide 7 • NA T (Network Address Translation ) Global address pool and rese rved ma p 1. Clic k on Adva nced NAT Configuration… on the web page, “Securi ty Interface Configuratio n.
7 • NAT (Network Address Transl ation) Model 3086 G.SHDSL Integrated Access Devi ce User Guide 132 Introduction 6. Set the parameters to the following values: – Global IP Addr ess:1 00.
133 Chapter 8 Monitoring Status Chapter cont ents Status LEDs. ............ ........... ................. ........... ........... ............ ........
8 • Monitor ing Status Model 3086 G.SHDSL Integrated Access Devi ce User Guide 134 Status LEDs Status LEDs The LE Ds indic ate the s tatus of the Power , the WAN ( DSL) i nter-mode m link, Sync Se rial or T1/E1 por t, the Ethernet connection, and Status.
135 Chapter 9 Diagnostics Chapter cont ents Introduction ....................... ........... ........... ............ ........... ........... ................. ............ ....... ......... ............ ........... .....136 Ping ................... .
9 • Diagno stics Model 3086 G.SHDSL Integrated Access Devi ce User Guide 136 Introduction Intr oduction The Mo del 3086 o ffers th ree s ets of di agnostic s: Loc al Analog Loopback (serial port loop), Re mote Digital Loopback (DSL loop ), and T 1/E1 Loops f or th e Model 30 86/K.
Operating Local Analog Loopback (LAL) —Serial Port Loop 137 Model 3086 G.SHDSL Integrated Access Device User Guide 9 • Di agno sti cs –N p i m a g e –K e y –I n i t b u n –I m . c o n f –T f t p u p d t . r b t –T f t p u p d t . e n d –S c r i p t .
9 • Diagno stics Model 3086 G.SHDSL Integrated Access Devi ce User Guide 138 T1/E1 Di agnostics keyboard of the local terminal will appear on the local terminal screen after having been passed to the re mote Model 308 6 and looped back) . See Figure 13 .
T1/E1 Diagnostics 139 Model 3086 G.SHDSL Integrated Access Device User Guide 9 • Di agno sti cs To set the 3086 T1/E 1 port in Ne twork Lo opback te st, do the follow ing: 1. Go to the 3086 Main page, select E1/T1 . Next, click on Test Modes , select networ k Loop usi ng th e drop down me nu, clic k on the Activate T est M ode butt on.
9 • Diagno stics Model 3086 G.SHDSL Integrated Access Devi ce User Guide 140 T1/E1 Di agnostics 1. Go to the 3086 Main page, select E1/T1 . Next, click on Test Modes , sel ect local Loo p using the d rop down menu, click on the Activate T est Mod e button.
T1/E1 Diagnostics 141 Model 3086 G.SHDSL Integrated Access Device User Guide 9 • Di agno sti cs T1/E1 connection Status The 3086 E 1/T1 status p age disp lays a number of al arms condit ions, Transc eiver stat us, and st atistics .
9 • Diagno stics Model 3086 G.SHDSL Integrated Access Devi ce User Guide 142 BIT Error R ate (V.52) Diagnostics BIT Error Rate (V .52) Diagnostics The Mode l 3086 off ers a V.52 Bit Error Rat e (BER) 511 t est pat tern. This test patt ern may be invoked along with the LAL and RDL test s to eval uate the uni t(s) and th e DSL communicati on links.
143 Chapter 10 Contacting Patton for assistance Chapter cont ents Introduction ....................... ........... ........... ............ ........... ........... ................. ............ ....... ......... ............ ........... .....144 Contact information.
10 • Cont acting Pa tton for a ssistan ce Model 3086 G.SHDSL Integrated Access Devi ce User Guide 144 Introduction Intr oduction This chapte r contains t he foll owing info rmation: • “Contact information” —des cribes how to c ontact PATTON tec hnical support fo r assistance.
Warranty Service and Returned Merch andise Authorizations (RMAs) 145 Model 3086 G.SHDSL Integrated Access Device User Guide 10 • Contac ting Pat ton for assista nce Return for cr edit policy • Less than 30 days: No Charge. Your credit will be issu ed up on rec eip t and i nspe cti on of the e qui pment .
10 • Cont acting Pa tton for a ssistan ce Model 3086 G.SHDSL Integrated Access Devi ce User Guide 146 Warr anty Service and Returned Merchandise Authori zations (RMAs).
147 Appendix A Compliance information Chapter cont ents Compliance ....... ........... ............ ................ ............ ........... ........... ............ ................. ........ ... ........... ........... ...........148 EMC ..........
Compl iance 14 8 Model 3086 G.SHDSL Integrated Access Device User Guide A • C omplianc e info rmation Complia nce EMC • FCC Pa rt 1 5, Cl ass A • EN55022, Clas s A • EN55024 Safety • UL60950-1 /CSA C22.
Authorized European Representative 149 Model 3086 G.SHDSL Integrated Access Device User Guide A • C omplianc e info rmation Authorized Eur opean R epresentative D R M Green European Co mpliance Ser vices Limited.
Industry Canada N otice 150 Model 3086 G.SHDSL Integrated Access Device User Guide A • C omplianc e info rmation some si tuations. Re pairs t o some c ertifie d equi pment sh ould be made by an authori zed maintenance facility designated by the supplier .
151 Appendix B Specifi cations Chapter cont ents General Character istics .................. ................. ........... ............ ........... ........... ................. ....... .... ............ ........... .....152 G.SHDSL Characterist ics .
B • Specif icati ons Model 3086 G.SHDSL Integrated Access Devi ce User Guide 152 General Chara cteristics General Characteristic s • Compact low-cost plug and play IAD • 10/100 Etherne t • Unlimited h ost suppor t.
Sync Serial Interface 153 Model 3086 G.SHDSL Integrated Access Device User Guide B • Specif icati ons Sync Serial Interface • ITU X.21 or V.35 interf ace • Available with Female M34, DB-25, and DB-15 connecto rs • User configurable DTE/DC E for X.
B • Specif icati ons Model 3086 G.SHDSL Integrated Access Devi ce User Guide 154 PPP Support • uPNP control led de vice fo r seamle ss netw orked de vi ce int erconnectiv ity and Windows XP integrat ion. • IGMPv2 Proxy support (RFC 22 36). • Frame Relay with Annex A/D/LMI, RFC 1490 MpoFR and FRF.
Security 155 Model 3086 G.SHDSL Integrated Access Device User Guide B • Specif icati ons Secu rity • Packet filt ering fir ewall fo r cont rolled acces s to and from LAN/WAN. S upport for 25 5 rule s in 3 2 fil ter set s. 16 indivi dual connection prof iles.
B • Specif icati ons Model 3086 G.SHDSL Integrated Access Devi ce User Guide 156 Power and Po wer Supply Specifications • Fuse rating: 250 Volt s, 400 mA, time delay Connect the equipment to a 36–60 VDC source that is electri - cally isolated from the AC source.
157 Appendix C Cable Recommendations Chapter cont ents DSL Cable............... ........... ........... ................. ........... ............ ........... ................. ........... .. ......... ................. ...........158 Ethernet Cab le .
C • Cable Recomme ndations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 158 DSL Cable DSL Cabl e 10 foot (3 m), RJ-11/RJ-11 (refer to “RJ-11 non-shielded port” on page 160 ) Ethernet .
159 Appendix D Physical Connectors Chapter cont ents RJ-45 shiel ded 10/100 Et hernet port .............. ........... ............ ........... ........... ................. ........... ..... ....... ........... .....160 RJ-11 non-shi elded port ......
D • Physical Con nectors Model 3086 G.SHDSL Integrated Access Devi ce User Guide 160 RJ-45 shielded 10/100 Ethernet port RJ-45 sh ielded 10/100 Ethernet por t Assuming the MD I-X switch is in the out pos ition. RJ-11 non-sh ielded port Single twisted-pai r (TP) for full-duplex transm issi on.
Serial port 161 Model 3086 G.SHDSL Integrated Access Device User Guide D • Phy sica l Co nnect ors Serial port V. 3 5 ( M / 3 4 C o n n e c t o r ) V .
D • Physical Con nectors Model 3086 G.SHDSL Integrated Access Devi ce User Guide 162 Pow er inp ut X.21 (DB- 15 Connector) E1/T1 (RJ -48C Co nnector ) Power input IEC 320 co nnector (two pr ong).
163 Appendix E Comma nd Line Inter face (CLI) Operati on Chapter cont ents Introduction ....................... ........... ........... ............ ........... ........... ................. ............ ....... ......... ............ ........... ....
E • Command Line Interfac e (CLI) Operation Model 3086 G.SHDSL Integrated Access Devi ce User Guide 164 Introduction Intr oduction The modem configuration and status ca n al so be view and m odified through the consol e, which is acc essible through the RS-232 seri al port o r through a Telne t sessio n over Ether net.
CLI T ermi nolo gy 165 Model 3086 G.SHDSL Integrated Access Device User Guide E • Command Line Interface (CLI) Operati on Using the Console The cons ole c ommands neede d for the v ario us modes o f operatio n are des cribed in l ater sections . In this sub - section are the most basi c command s n eed ed fo r cons ol e oper at ion.
E • Command Line Interfac e (CLI) Operation Model 3086 G.SHDSL Integrated Access Devi ce User Guide 166 Adminis teri ng us er accoun ts clear list Æ ip interface ip1 list ? secondaryipaddresses Æ .
Administ ering user acco unts 167 Model 3086 G.SHDSL Integrated Access Device User Guide E • Command Line Interface (CLI) Operati on Enter the new pas sword tw ice as prompt ed: Enter new password: *** Again to verify: *** fi Note No chec k is made fo r any current passwor d which may have been set for the us er.
E • Command Line Interfac e (CLI) Operation Model 3086 G.SHDSL Integrated Access Devi ce User Guide 168 Adminis teri ng us er accoun ts Example: To read t he attr ibute ‘Versio n’: gshdsl show V.
Administ ering user acco unts 169 Model 3086 G.SHDSL Integrated Access Device User Guide E • Command Line Interface (CLI) Operati on Default Setting of the unit Termin al: Remot e Interface: Hdlc Da.
E • Command Line Interfac e (CLI) Operation Model 3086 G.SHDSL Integrated Access Devi ce User Guide 170 Adminis teri ng us er accoun ts.
171 Appendix F Inter working Functions Infor mation Chapter cont ents Introduction ....................... ........... ........... ............ ........... ........... ................. ............ ....... ......... ............ ........... .....173 Frame Relay Local Man agement Interface .
F • Inte rworki ng Func tions In forma tion Model 3086 G.SHDSL Integrated Access Devi ce User Guide 172 Understandi ng the Channel Level View .................... ................. ........... ........... ........... ............ ........ ... .....186 Set Configurat ion Variables associated wit h the Channels .
Introduction 173 Model 3086 G.SHDSL Integrated Access Device User Guide F • Inte rworking Functio ns Info rmatio n Intr oduction This append ix describe s the Frame Relay Interwor king functio ns (IWF) that are available on th e Model 3086.
F • Inte rworki ng Func tions In forma tion Model 3086 G.SHDSL Integrated Access Devi ce User Guide 174 Frame Relay Local Management In terface • 933A_Network : The ITU Q.933 proto col will be used . The unit will op erate as the Networ k side of the connection • 933A_User: The ITU Q.
Frame Relay Local Management Interface 175 Model 3086 G.SHDSL Integrated Access Device User Guide F • Inte rworking Functio ns Info rmatio n CLI Co nfigu rat ion Me thods The fol lowing de scri bes how to c onfigure the LMI us ing the CLI. Al l LMI comma nds are co ntained unde r the “lmi” directive of the CLI interface.
F • Inte rworki ng Func tions In forma tion Model 3086 G.SHDSL Integrated Access Devi ce User Guide 176 Frame Relay Service Interworking (FRF.8) W eb Configu rat ion Metho ds The follow ing describes how to configure the L MI using the web inter face.
Frame Relay Service Inte rworking (FR F.8) 177 Model 3086 G.SHDSL Integrated Access Device User Guide F • Inte rworking Functio ns Info rmatio n • Always_one : – Frame Relay: All F rame Relay packets will have the D E field in the heade r set to a constant value of 1.
F • Inte rworki ng Func tions In forma tion Model 3086 G.SHDSL Integrated Access Devi ce User Guide 178 Frame Relay Service Interworking (FRF.8) specif ication. Se e figure 16 fo r the encaps ulation types and includes an exam ple where a Rou ted IP packe t is receiv ed on both the Fr ame Relay and ATM s ides of the co nnection.
Frame Relay Service Inte rworking (FR F.8) 179 Model 3086 G.SHDSL Integrated Access Device User Guide F • Inte rworking Functio ns Info rmatio n The Frame Relay Serv ice I nterworki ng functio ns on the Patt on Electroni cs Model 3 086FR are also def ined as sixty-four channels.
F • Inte rworki ng Func tions In forma tion Model 3086 G.SHDSL Integrated Access Devi ce User Guide 180 Frame Relay Service Interworking (FRF.8) Note After the fi rst several le tters of the c ommand are typed pressing the Ta b key will tell the system to comple te the variable or command name .
Frame Relay Service Inte rworking (FR F.8) 181 Model 3086 G.SHDSL Integrated Access Device User Guide F • Inte rworking Functio ns Info rmatio n “Group #” column al ong the l eft side of the screen is a hyperl ink that wi ll br ing up detai led configur ation information about each group and the channels available in the group.
F • Inte rworki ng Func tions In forma tion Model 3086 G.SHDSL Integrated Access Devi ce User Guide 182 Frame Relay Network In terworking (FRF.5) Figure 18. FRF.8 Channel Lev el Configuration Screen Figure 19. FRF.8 Channel Level P acket Information Frame Rela y Network Interworking (F RF .
Frame Relay Network Interworking (F RF.5) 183 Model 3086 G.SHDSL Integrated Access Device User Guide F • Inte rworking Functio ns Info rmatio n Port Level Configuration Options: Ports are us ed to define the lo wer level I nterworking Fu nctions.
F • Inte rworki ng Func tions In forma tion Model 3086 G.SHDSL Integrated Access Devi ce User Guide 184 Frame Relay Network In terworking (FRF.5) • FRS stat e: The state variable allows the user to enable or di sable t he port for op erati on. No te t hat port level configuration variables are not changeable “on the fly”.
Frame Relay Network Interworking (F RF.5) 185 Model 3086 G.SHDSL Integrated Access Device User Guide F • Inte rworking Functio ns Info rmatio n – not acti ve: No inf ormation has been received fro.
F • Inte rworki ng Func tions In forma tion Model 3086 G.SHDSL Integrated Access Devi ce User Guide 186 Frame Relay Network In terworking (FRF.5) FRN Rx Packets: 145/0 FRN Network Mgt: lmi_both FRN .
Frame Relay Network Interworking (F RF.5) 187 Model 3086 G.SHDSL Integrated Access Device User Guide F • Inte rworking Functio ns Info rmatio n must f irst def ine th e port num ber th at is bein g conf igure d and th en the cha nnel n umber that is b eing co nfig - ured.
F • Inte rworki ng Func tions In forma tion Model 3086 G.SHDSL Integrated Access Devi ce User Guide 188 Frame Relay Network In terworking (FRF.5) Once “FRN Setup (FRF.5)” is selected the Port L e vel Overvie w screen is displayed as s hown belo w.
Frame Relay Network Interworking (F RF.5) 189 Model 3086 G.SHDSL Integrated Access Device User Guide F • Inte rworking Functio ns Info rmatio n Channe l Level Informa tion Screen The Channel Level co nfiguration section of the screen al lows the user to s etup and configure the in dividual channels asso ciated with the spec ified port.
F • Inte rworki ng Func tions In forma tion Model 3086 G.SHDSL Integrated Access Devi ce User Guide 190 Frame Relay (Ethernet Based) Operations Frame Relay (Ethernet Based) Operations Ethernet based (or basic) F rame Relay is also available within the Patto n Electronics Model 3086.
Frame Relay (Ethernet B ased) Operations 19 1 Model 3086 G.SHDSL Integrated Access Device User Guide F • Inte rworking Functio ns Info rmatio n • Port: This variable defines the low layer port that will be used to transport data across the frame relay inter - face.
F • Inte rworki ng Func tions In forma tion Model 3086 G.SHDSL Integrated Access Devi ce User Guide 192 Serial Interface Configuration W eb Based Conf igu ratio n of th e Frame Relay Ch annel This secti on defines the configuratio n of the Frame Re lay Service thr ough the web interface.
Serial Interface Configuration 193 Model 3086 G.SHDSL Integrated Access Device User Guide F • Inte rworking Functio ns Info rmatio n CLI Co nfigu rat ion Me thods The follow ing section defines ho w to configure th e serial interface using the CLI. All serial in terface functions are available under the “serial” d irective of the CL I.
F • Inte rworki ng Func tions In forma tion Model 3086 G.SHDSL Integrated Access Devi ce User Guide 194 Ping an d Trace Route > serial rxClkInv: > Allows the user to invert the clock source &g.
Ping and Trace Route 195 Model 3086 G.SHDSL Integrated Access Device User Guide F • Inte rworking Functio ns Info rmatio n T race Route fro m the CLI Interface The Trace Ro ute feature is also available from the “ip” directiv e in the CLI inter face.
F • Inte rworki ng Func tions In forma tion Model 3086 G.SHDSL Integrated Access Devi ce User Guide 196 Backup a nd Restore Features Ping and traceroute fr om the web interface: Both the Ping and Traceroute features are avail able from the web interface on the Model 3086.
デバイスPatton electronic 3086の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Patton electronic 3086をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPatton electronic 3086の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Patton electronic 3086の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Patton electronic 3086で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Patton electronic 3086を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPatton electronic 3086の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Patton electronic 3086に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPatton electronic 3086デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。