Patton electronicメーカー49040の使用説明書/サービス説明書
ページ先へ移動 of 59
SmartNode 4940 Series Multi-Por t T1/E1/PRI Enterprise V oIP Media Gat eway User Manual Sales Office: +1 (301) 97 5-1000 Techni cal Su ppor t: +1 (301) 975- 1007 E-mail: suppor t@patton.
Patton Electronics Company , Inc. 7622 Ric kenbacker Drive Gaithersburg , MD 20879 USA Tel: +1 (301 ) 975- 1000 Fax: +1 ( 301) 8 69-929 3 Support: +1 (30 1) 975 -1007 Web: www.pa tton.com E-mai l: suppo rt@ pat ton. co m T rademark Statement The terms SmartNode an d SmartWare ar e trademarks of Patto n Electronics Company .
3 Summar y T able of Contents 1 General information ..... ...... ........ ...... ...... ...... ...... ..... ......... ...... ...... ...... ..... ...... ......... ...... ..... ...... ...... ......... ... .... 13 2 Applications overview ...... ........ .
4 T able of Contents Summary Table of Contents ...... ...... ...... ...... ...... ........ ...... ...... ...... ...... ..... ......... ...... ...... ..... ...... ...... ......... ...... ... 3 Table of Contents .. ...... ...... ........ ...... ...... .
5 SmartNode 4940 User Man ual Table of Con tents Facto ry-defa ult IP s ettings ....... ........... ............ ................. ........... ........... ............ ........... ................. ........... ...... .2 8 Connecting the S martNode to the n etwork .
6 SmartNode 4940 User Man ual Table of Con tents C Cabl in g ...... ...... ...... ...... ...... ..... ......... ...... ...... ...... ..... ......... ...... ...... ...... ..... ...... ......... ...... ..... . ........ ...... ...... ...... . 47 Introd ucti on .
7 List of Fi gures 1 SmartNode 4940 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2 SN4940 rear pa nel . . . . . . . . . . . . . . . . . . . . . . . . .
8 List of T ables 1 General conven tions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2 SmartNode 4940 PRI Ports and Voice Channels . . . . . . . . . . . .
9 About this guide This guide descri bes the Smar tNode 4940 hardwar e, instal lation and basi c configurat ion. For det ailed sof tware configurat ion informat ion refer to the Smar tWare So ftware Configu ration Gu ide and the avail able Configura- tion Notes.
10 SmartNode 4940 User Man ual Precau tions Notes, ca utions, and warnings, which have t he foll owing meani ngs, are used th roughout t his guid e to help yo u become aware of potential problems. Warnin gs are intended to prev ent safety hazards that co uld result in per- sona l inju ry.
11 SmartNode 4940 User Man ual Safety when working wi th electricity • Do not open the device when t he powe r cord i s connecte d. For s ystems without a power switch and without an external power adapter, line volt- ages ar e present wi thin th e device wh en the power cord is conne cted.
12 SmartNode 4940 User Man ual General observat ions • Clean the cas e with a soft slightly moist ant i-static cloth • Place the unit on a flat surfac e and ensure free air circul ation • Avoid .
13 Chapter 1 General i nformation Chapter cont ents SmartNode 4940 overview ............ ........... ............ ........... ........... ............ ................. ........... ........... ........... ............ . 14 SN4940 model c odes ... ....
SmartNode 4940 over view 14 SmartNode 4940 User Man ual 1 • Gen eral info rmation SmartN ode 4940 overv iew As enter prises mov e toward unified communicati ons, the Smar tNode™ 4940 E nterpri se .
SmartNode 4940 over view 15 SmartNode 4940 User Man ual 1 • Gen eral info rmation SN4940 model codes The Smart Node 4 940 seri es co nsists of se veral mo dels. T hey dif fer in th e number of PRI port s and voi ce chan- nels s upport ed. Al l model s come e quipped with o ne 10/1 00/1000B ase-T Ether net p ort.
SmartNode 4940 rear pa nel 16 SmartNode 4940 User Man ual 1 • Gen eral info rmation SmartN ode 4940 rear panel The Smart Node 49 40 rear pa nel port s are de scribe d in table 3 .
SmartNode 4940 rear pa nel 17 SmartNode 4940 User Man ual 1 • Gen eral info rmation Table 3. Rear panel ports Port Desc ript ion ETH 0/0 Auto-MDX Gigabit-Ethernet port, RJ-45 (se e figu re 2 ), connects the unit to an Ethernet WAN device (for example, a cable modem, DSL modem, or fiber modem).
SmartNode 4940 front pa nel 18 SmartNode 4940 User Man ual 1 • Gen eral info rmation SmartN ode 4940 front panel Figure 3 shows SmartNode 4940 f ront panel L EDs, the L ED definit ions are liste d in table 4 .
SmartNode 4940 front pa nel 19 SmartNode 4940 User Man ual 1 • Gen eral info rmation Table 4. SN4940 Front and Rear panel LEDs LED Descript ion Note If an error occu rs, all LEDs wil l flash once per second. Power When lit, indicates power is applied.
20 Chapter 2 Applicatio ns over view Chapter cont ents Introd ucti on ....................... ................. ........... ........... ............ ........... ................. ........... ........... ...... ........... ............ . 21 Application—Convert Legacy PBX to VoIP .
Introduction 21 SmartNode 4940 User Man ual 2 • Applications overview Intr oduction Patton’s SmartN ode Enterprise VoIP Me dia Gateways deli ve r the features you need for advance d multis ervice voice and data network applic ations.
22 Chapter 3 Smar tNode installation Chapter cont ents Planning the in stallati on ................ ........... ............ ................. ........... ........... ............ ........... ........... ................. .......23 Site lo g .........
Plan ning t he instal latio n 23 SmartNode 4940 User Man ual 3 • SmartNode in stallation Planning th e installatio n Before installing the gateway ro uter device, the following task s should be comp.
Installing the gateway 24 SmartNode 4940 User Man ual 3 • SmartNode in stallation • IP addres ses of central H. 323 gatekeeper (i f used) • IP addr esses and/o r URL of SIP serve rs or Internet telephony services (if used) • Login and pas sword for SIP or H.
Installing the gateway 25 SmartNode 4940 User Man ual 3 • SmartNode in stallation Connect t he cabl es in th e foll owing or der: 1. Connect the T1 /E1 cables to the P RI T1/E1 ports (s ee Appendi x C on page 47 and Appe ndix D on page 52 ).
Installing the gateway 26 SmartNode 4940 User Man ual 3 • SmartNode in stallation Connec ting the power supply 1. Insert the bar rel type connec tor end of the AC p ower cord in to the external po wer supply connector (see figu re 5 ). 2. Insert the female end of the power cor d into the internal power s upply connect or.
27 Chapter 4 Initial configuration Chapter cont ents Introd ucti on ....................... ................. ........... ........... ............ ........... ................. ........... ........... ...... ........... ............ . 28 Con figuring th e desire d IP add ress .
Introduction 28 SmartNode 4940 User Man ual 4 • I nitia l conf igu ratio n Intr oduction This chapter lead s you through th e basic step s to set up a new SmartNode and to download a config uration.
Loading the con figuration (opti onal) 29 SmartNode 4940 User Man ual 4 • I nitia l conf igu ratio n Figure 6. Connecting the SmartNode to the network You can check the c onnection with the ping co mmand from the Smart Node to another h ost on the network.
Bootloader 30 SmartNode 4940 User Man ual 4 • I nitia l conf igu ratio n 172.16.1.99(if-ip)[WAN]# reload Running configuration has been changed. Do you want to copy the 'running-config' to.
Bootloader 31 SmartNode 4940 User Man ual 4 • I nitia l conf igu ratio n Note With the B ootloader, only the Ether net interface 0 /0 is available. The Boot- loader applies the IP address, subnet mask, and default gateway that were last confi gur ed by t he Bo otl oad er its elf or by another application (e.
Bootloader 32 SmartNode 4940 User Man ual 4 • I nitia l conf igu ratio n Using default protocol (TFTP) - Raw file loaded 0x01800100-0x0199ca6b, 1689964 bytes, assumed entry at 0x01800100 RedBoot> fis delete -n 1 Delete image 1 - continue (y/n)? y .
Ad dit ion al i nf orm at ion 33 SmartNode 4940 User Man ual 4 • I nitia l conf igu ratio n Note This type of download takes about 25 m inutes since it uses a serial link at only 9600 bps.
34 Chapter 5 Contacting Patton for assistance Chapter cont ents Introd ucti on ....................... ................. ........... ........... ............ ........... ................. ........... ........... ...... ........... ............ . 36 Contact inf ormati on .
Introduction 35 SmartNode 4940 User Man ual 5 • Contacting P atton for assistance Intr oduction This chapte r contains t he foll owing info rmation: • “Contact information” —des cribes how to contac t Patton technical sup port for assistance .
Warranty Service and Returned Merch andise Authorizations (RMAs) 36 SmartNode 4940 User Man ual 5 • Contacting P atton for assistance Out-of-war ranty serv ice Patton servic es what we sell, no matter how you ac quired it, inc luding malfunctioning p roducts that are no longer under warranty.
37 Appendix A Compliance information Chapter cont ents Comp liance .................. ................. ........... ............ ........... ........... ............ ................. ........... ........... ........... ............ . 39 EMC .........
Compl iance 38 SmartNode 4940 User Man ual A • Compliance information Complia nce EMC • FCC Pa rt 1 5, Cl ass A • EN55022, Clas s A • EN55024 Safety • UL 60950-1/CSA C 22.
FCC Part 68 (ACT A) Stateme nt 39 SmartNode 4940 User Man ual A • Compliance information FCC Par t 68 (A CT A) S tatement This equipme nt complies with P art 68 of FCC rules and th e requirements adopted by ACT A.
CE Declaration of C onformity 40 SmartNode 4940 User Man ual A • Compliance information CE Declarat ion of Co nformity This equi pment conforms to the requirem ents of Counci l Directiv e 1999/5/EC .
41 Appendix B Specifi cations Chapter cont ents Voice conn ectivity ......................... ........... ............ ........... ........... ............ ................. ........... ........... ........... ............ . 43 Data conn ectivity ....
Voice connectiv ity 42 SmartNode 4940 User Man ual B • Specifications Note Refer to the software f eature matrix for the mos t up-to-date spec ifications.
Voice signalling 43 SmartNode 4940 User Man ual B • Specifications G.711 Fax-Bypass V oice signallin g SIPv2 H.323v 4 SIP c all t ransf er, redire ct Over lap or e n-bloc dia ling DTMF in- band, out.
Management 44 SmartNode 4940 User Man ual B • Specifications Manag ement Web-based GUI Industry st andard CLI with l ocal conso le (RJ-45, RJ -231, 9 600 bps, 8, N, 1) and re mote Telnet acce ss, fu.
Identification of the SmartNode devices via SNMP 45 SmartNode 4940 User Man ual B • Specifications Identification of the SmartNode devices via SNMP All SmartNod e devices have as signed sysObj ectID (.iso. org.dod.internet .mgmt.mib-2.sys tem.sysObjec tID) numbers (s ee table 7 ).
Identification of the SmartNode devices via SNMP 46 SmartNode 4940 User Man ual B • Specifications Note The SysO bjectIDs fo r the SN49 40 G.SHDSL models are the s ame as the corresponding non-G.SHDSL models listed above. According to table 7 , an SNMP get request to .
47 Appendix C Cabling Chapter cont ents Introd ucti on ....................... ................. ........... ........... ............ ........... ................. ........... ........... ...... ........... ............ . 49 Console .. ........... ...
Introduction 48 SmartNode 4940 User Man ual C • C abling Intr oduction This section pr ovides informatio n on the cables used to connect the SmartN ode and the inte rface cards to the existing network inf rastructure and to third p arty products.
Ethernet 49 SmartNode 4940 User Man ual C • C abling Ethernet Ethernet devices (10 Base-T/100Bas e-T/1000Bas e-T) are connec ted to the SmartN ode over a ca ble with RJ-45 plugs. T he Ether net port on th e SN4940 i s Auto-MDX and uses any st raight o r crossov er cable to connect to hubs, swi tches , PCs or other de vices.
E1 PRI 50 SmartNode 4940 User Man ual C • C abling E1 PR I The E 1 PR I is usual ly conne cte d to a PBX o r s wit ch—l oc al exchange (LE). Type and pi n outs of these d evices vary de pend ing on the ma nufac turer. In most ca ses, a st raight-through RJ-45 to RJ-4 5 can be used to connect the PRI with a PBX .
T1 PRI 51 SmartNode 4940 User Man ual C • C abling T1 PR I The T1 PRI is usually conne cted to a PBX or switch—loc al exchange (LE). Type and pin outs of these devices vary de pend ing on the ma nufac turer. In most ca ses, a st raight-through RJ-45 to RJ-4 5 can be used to connect the PRI with a PBX .
52 Appendix D Por t pin-outs Chapter cont ents Introd ucti on ....................... ................. ........... ........... ............ ........... ................. ........... ........... ...... ........... ............ . 53 Console port ......
Introduction 53 SmartNode 4940 User Man ual D • Port pin- outs Intr oduction This section pr ovides pin-out i nformation for the p orts of the Smar tNode. Conso le port Confi guration se tti ngs: 960 0 bps, 8 bi ts, no par ity, 1 st op bit, no flow contr ol Figure 14.
PRI p ort 54 SmartNode 4940 User Man ual D • Port pin- outs PRI po rt Note Pins not listed are not used. Table 9. RJ45 socket 1000Ba se-T Pin Signal 1 TRD0+ 2 TRD0- 3 TRD1+ 6 TRD1- 4 TRD2+ 5 TRD2- 7 TRD3+ 8 TRD3- Tabl e 10.
55 Appendix E Smar tNode 49 40 fact or y configuration Chapter cont ents Introd ucti on ....................... ................. ........... ........... ............ ........... ................. ........... ........... ...... ........... ...........
Introduction 56 SmartNode 4940 User Man ual E • Smart Node 4940 factory configuration Intr oduction The fact ory configur ation se ttings fo r SmartNod e 4940 ar e as fol lows: #--------------------.
57 Appendix F En d user license agree ment Chapter cont ents End User License Agreement ............... ................. ........... ........... ............ ........... ........... ................. ........... ........... .. 58 1. Defi nition s ...
End User Licens e Agreement 58 SmartNode 4940 User Man ual F • End user li cense a greeme nt End User License Agreement By opening this package, op erating the Designated Eq u ipment or downlo ading the Program( s) electronically , the End U ser agrees to th e followin g conditions: 1.
End User Licens e Agreement 59 SmartNode 4940 User Man ual F • End user li cense a greeme nt If th e Progr am(s) are ac quire d by or on be half of a un it or agency of the United States Government,.
デバイスPatton electronic 49040の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Patton electronic 49040をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPatton electronic 49040の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Patton electronic 49040の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Patton electronic 49040で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Patton electronic 49040を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPatton electronic 49040の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Patton electronic 49040に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPatton electronic 49040デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。