PelcoメーカーFR85011の使用説明書/サービス説明書
ページ先へ移動 of 32
® INST ALLA TION FT85011/FR85011 Fiber T ransmitter and Receiver Single-Channel Digitally Encoded V ideo with Bidirectional Data C1642M-A (1/05) C1642M-A FT85011.
C1642M-A FT85011.book Page 2 Wednesday, January 19, 2005 12:46 PM.
C1642M-A (1/05) 3 Contents Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 C1642M-A (1/05) Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
C1642M-A (1/05) 5 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
6 C1642M-A (1/05) CAUTION: These servicing instructions are for use by qualifi ed service personnel only. T o reduce the risk of electric shock do not perform any servicing other that contained in the oper - ating instructions unless you are qualifi ed to do so.
C1642M-A (1/05) 7 Product Overview DESCRIPTION The FT85011/FR85011 fi ber transmitter and receiver provide the ability to transmit one unidirectional composite video channel and one bidirectional data channel over one optical fiber .
8 C1642M-A (1/05) • Standalone and rack-mountable modular design • LED indicators for monitoring of signal status, data activity , and operating power NOTES: • The FT85011 transmitter/FR85011 receiver is a Class 1 laser product that complies with FDA radiation performance standard 21CFR Subchapter J and with IEC 60825-1 Edition 1.
C1642M-A (1/05) 9 MODELS The FT85011/FR85011 fi ber transmitter and receiver consist of the following series of m odels: Multimode Models: FT85011MSTR Single-channel fi ber optic video transmitter/d.
10 C1642M-A (1/05) FRONT PANEL The front panel of the FT85011 transmitter and the FR85011 receiver provides LED indicators that allow you to monitor data activity, signal status, and operating power (refer to Figure 2).
C1642M-A (1/05) 11 REAR PANEL All connections to the FT85011 transmitter and FR85011 receiver are made to the rear panel of the modules (refer to Figure 3).
12 C1642M-A (1/05) Installation PACKAGE CONTENTS The following items are supplied: • With the FT85011 transmitter: 1 Regulated switching power supply with four plug adapters (North American, Australian, U.K., and European configurations); 100-240 V AC input, 12 VDC output 1W all clip with two 4-40 x .
C1642M-A (1/05) 13 With the FT85011 transmitter/FR85011 receiver powered off, set the Data Selection switch to the required data communication using a small screwdriver.
14 C1642M-A (1/05) MOUNTING THE T RANSMITTER/RECEIVER INTO A RACK Optional fiber rack mount chassis, which can be mounted into an industry-standard 19-inch (48.26 cm) equipment rack, are designed for installation of multiple modules: • The RK5000PS-3U fiber rack mount chassis provides 12 module slots and a power supply .
C1642M-A (1/05) 15 Figure 5. Mounting the FT85011 T ransmitter/FR85011 Receiver Using the W all Clip TRANSMITTER/ RECEIVER WALL CLIP LOWER FLANGE SCREW, PHILLIPS PAN HEAD WITH LOCK WASHER (2) HORIZONTAL MOUNTING HOLE (2) UPPER FLANGE VERTICAL MOUNTING HOLE (2) C1642M-A FT85011.
16 C1642M-A (1/05) CONNECTIONS Connections to the FT85011 transmitter and the FR85011 receiver are made on the rear panel of the modules and consist of the following: • Power connection NOTE: A 12 VDC or 24 VAC power supply can be used to power the transmitter/receiver when used as a standalone module.
C1642M-A (1/05) 17 T able B. Data Connector Pin Assignments Pin Number RS-232 RS-422 RS-485 2-Wire RS-485 4-Wire Manchester Bi-Phase 1— Out+ In+/Out+ Out+ — — 2— Out- In-/Out- Out- — — 3.
18 C1642M-A (1/05) Figure 7. RS-232 Data Communication Wiring 0 1 2 3 4 5 6 7 8 9 RS-232 DATA SELECTION RS-232 DATA CONNECTIONS BETWEEN DEVICE A AND FR85011 RECEIVER FR85011 RECEIVER – DATA CONNECTO.
C1642M-A (1/05) 19 Figure 8. RS-422 Data Communication Wiring 0 1 2 3 4 5 6 7 8 9 RS-422 DATA SELECTION RS-422 DATA CONNECTIONS BETWEEN DEVICE A AND FR85011 RECEIVER 1 (TX+) DATA OUT+ 2 (TX-) DATA OUT.
20 C1642M-A (1/05) Figure 9. RS-485 2-Wire (Half Duplex) Data Communication Wiring 0 1 2 3 4 5 6 7 8 9 RS-485 2-WIRE DATA SELECTION RS-485 2-WIRE DATA CONNECTIONS BETWEEN DEVICE A AND FR85011 RECEIVER.
C1642M-A (1/05) 21 Figure 10. RS-485 4-Wire (Full Duplex) Data Communication Wiring 0 1 2 3 4 5 6 7 8 9 RS-485 4-WIRE DATA SELECTION RS-485 4-WIRE FR85011 DATA CONNECTIONS BETWEEN DEVICE A AND RECEIVE.
22 C1642M-A (1/05) Figure 11. Manchester Data Communication Wiring MANCHESTER 0 1 2 3 4 5 6 7 8 9 MANCHESTER DATA SELECTION MANCHESTER DATA CONNECTIONS BETWEEN DEVICE A AND FR85011 RECEIVER FR85011 RE.
C1642M-A (1/05) 23 Figure 12. Bi-Phase Data Communication Wiring BI-PHASE DATA CONNECTIONS BETWEEN DEVICE A AND FR85011 RECEIVER BI-PHASE DATA CONNECTIONS BETWEEN DEVICE B AND FT85011 TRANSMITTER FT T.
24 C1642M-A (1/05) T roubleshooting LED indicators on the front panel of the FT85011 transmitter/FR85011 receiver (refer to Figure 2) allow you to monitor signal status, data activity, and operating power. T able C pro- vides information about the front-panel indicators and associated troubleshooting guidelines.
C1642M-A (1/05) 25 Video Present LED (Continued) Red on receiver Incoming video signal is not present on the channel. Optical signal is not being received from the transmitter . Carrier Detect LED is also red. Refer to the Carrier Detect LED troubleshooting section below .
26 C1642M-A (1/05) Carrier Detect LED (Continued) Red on transmitter (continued) A problem exists with the optical power budget. V erify that losses in fiber optic cable do not exceed the optical power budget specification of the fiber optic link. If the losses do exceed the optical power budget, contact Product Support.
C1642M-A (1/05) 27 Data Tx LED Flashing amber Data is being transmitted onto the fiber by the data port. — No action required. Red Data Selection switch is set to an invalid setting. Data Selection switch is set to setting 6, 7, 8, or 9. Set Data Selection switch to the correct setting for the desired data communication (refer to T able A).
28 C1642M-A (1/05) Specifications VIDEO Number of Channels 1 Modulation T ype Pulse code modulation, 8-bit resolution Video Input 1.0 Vp-p, 75 ohms; NTSC, PAL, and SECAM Bandwidth 6.
C1642M-A (1/05) 29 OPTICAL POWER BUDGET , TRANSMISSION DISTANCE, AND LASER CLASS 1 LIMIT Fiber Wavelength Optical Power Budget Maximum T ransmission Distance Laser Class 1 Limit* Multimode 1310 nm (video) 20 dB † 6 km (3.7 mi) ‡ <15.6 mW 850 nm (data) 20 dB † 6 km (3.
C1642M-A FT85011.book Page 30 Wednesday, January 19, 2005 12:46 PM.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
® United States | Canada | United Kingdom | The Netherlands | Singapore | Spain | Scandinavia | France | Middle East Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
デバイスPelco FR85011の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Pelco FR85011をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPelco FR85011の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Pelco FR85011の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Pelco FR85011で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Pelco FR85011を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPelco FR85011の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Pelco FR85011に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPelco FR85011デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。