AT&Tメーカー1445/1145の使用説明書/サービス説明書
ページ先へ移動 of 32
User Manual (Part 2) 2.4 GHz Cor dless T elephone 1445/1145 with Caller ID & Call W aiting 91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄ U ⁄ ¨ 07:21 Page 1.
Copyright © 2003 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones.
1 T ab le of contents Getting Started Q UICK REFERENCE GUIDE ..................2 Parts checklist .......................................4 Before you begin ..................................5 Telephone base installation................6 Battery installation & charging .
2 Getting Started Select Press to store a programming option (see page 10), or to store a directory entry in memory (see page 17). Quick r efer ence guide Off During a call, press to hang up. During programming, press to stop without making changes. Hold Press to place a call on hold.
3 Getting Started Quick r efer ence guide T elephone Base ANTENNA Swivel fully upright for best results. PAGE/ HANDSET LOCATOR Press to locate handset if lost (see page 14). IN USE/CHARGING Steady: Handset battery is charging. Flashing: Phone is in use, or call is on hold.
4 Getting Started P arts checklist Remember to save your sales receipt and original packaging in case you ever need to ship your telephone for warranty service.
5 Getting Started Befor e y ou begin About Caller Identification Caller ID with Call Waiting features in this telephone let you see who’s calling before you answer the phone, even when you’re on another call. These features require services provided by your local telephone company.
6 Getting Started T elephone base installation Install the telephone base as shown below. Choose a location away from electronic equipment, such as personal computers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture. NOTE: Use only the power cord supplied with this product.
7 Getting Started Batter y installation & charging After installation, place the handset in the base and allow the battery to charge for 12 hours before use. You can keep the battery charged by returning the handset to the base after each use. When battery power is fully depleted, a full recharge takes about 8 hours.
8 Getting Started W all mounting The telephone base can be installed on any standard wall-phone outlet as shown below. Choose a location away from electronic equipment, such as personal computers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture.
9 Getting Started Belt clip & optional headset Install belt clip as shown below if desired. For hands-free telephone conversations, you can use any industry standard 2.5 mm headset (purchased separately). For best results use an AT&T 2.5 mm headset.
10 Telephone Operation Press PROG to begin programming Press ^ or V to display features one by one Press SELECT to modify a displayed feature To stop at any time, press OFF Customizing y our telephone Follow the steps below to program the telephone. To stop at any time, press OFF .
11 Telephone Operation Customizing y our telephone Choose dial mode 1 Press PROG to begin programming. 2 Press ^ until screen displays DIAL MODE & setting. 3 Press SELECT to change current setting: 4 Press ^ to display TONE or PULSE. 5 Press SELECT to select displayed dial mode and exit.
12 Telephone Operation Making and answ ering calls Making and answering calls To answer an incoming call, press any key except OFF . To make a call, press PHONE , then dial a number. Press OFF to hang up. To preview numbers before dialing, enter numbers first, then press PHONE to dial.
13 Telephone Operation Options while on calls Caller ID If you have Caller ID service, the caller’s number will appear on the display screen after the first ring (see page 20 for additional Caller ID features and options). Call waiting If you have Call Waiting service, you will hear a beep if someone calls while you are already on a call.
14 Telephone Operation Handset locator Handset locator If the handset is misplaced, press the PAGE/HANDSET LOCATOR button in the handset cradle on the base. The handset will beep for 60 seconds to help you find it. When the handset is found, press OFF to stop the beeping (or press the PAGE/HANDSET LOCATOR button on the base).
15 Directory Dialing Directory dialing The telephone directory in the handset can store up to 50 names and telephone numbers. Each entry can contain a number up to 24 digits, and a name up to 15 letters long. A convenient search feature can help you find and dial numbers quickly (see pages 16-19).
16 Directory Dialing Speed dialing Numbers called most frequently can be stored in memory locations 1-9 and dialed with only two button presses. You can enter 9 Speed Dial numbers up to 24 digits long. Each number is stored in a one-digit memory location (1-9).
17 Directory Dialing Entering names into dir ector y To enter a name Press dial pad buttons once for the first letter, twice for the second, three times for the third, as shown in the example below. To enter a number, continue pressing the button until the number appears.
18 Directory Dialing Dir ector y name sear ch Follow the steps at left to browse through the tele- phone directory, or search to find a specific entry. You can press OFF at any time to exit the directory. To browse through the directory To browse, press ^ or V to scroll through all list- ings one by one.
19 Directory Dialing T o mo v e , edit or delete a listing When any listing is displayed, press SELECT to see options. Press ^ or V to highlight the option you want (blinking text), then press SELECT again to select it.
20 Caller ID Operation How Caller ID works If you subscribe to Caller ID service provided by your local phone company, information about each caller will be displayed after the first ring. Information about the last 90 incoming calls is stored in your call log.
21 Caller ID Operation 1 CID PAT JOHNSON 908-555-0100 8/12 10:06 AM NEW 03 2 V CHRIS WILLIAMS 908-555-1234 8/12 9:53 AM NEW 02 3 4 V MARK CLAYTON 908-555-5678 8/12 9:12 AM NEW 01 PHONE PHONE ON 9085555678 T o r e view y our call log When the phone is not in use, press CID to display information about the most recent caller.
22 Caller ID Operation T o dial a call log entry When any Caller ID screen is displayed, press PHONE to dial the number exactly as it appears on the screen. Dialing options Caller ID numbers may appear with an area code that may not be required for local calls.
23 Caller ID Operation T o delete call log entries To delete a single call log entry Press CID , to display the first Caller ID listing. Use the up/down arrow keys to find the entry you want to delete, then press CHAN/DELETE . When the entry is deleted, the next oldest record is displayed.
24 Caller ID Operation 2 SELECT ^ DIAL PROGRAM 908-555-0100 8/12 10:06 AM NEW 03 3 SELECT PAT JOHNSON 9085550100 6 SELECT PAT JOHNSON 908-555-0100 8/12 10:06 AM NEW 03 T o add entries to phone dir ector y When any Caller ID screen is displayed, follow the steps at left to enter it into your phone directory.
25 Appendix Displa y scr een messag es, lights and tones CONNECTING... The handset is waiting for a dial tone. NEEDS RECHARGING Handset battery is depleted. Place handset in base to charge the battery. BATTERY LOW Handset battery is low. Place handset in base to charge the battery.
26 Appendix Displa y scr een messag es, lights and tones Indicator lights IN USE/CHARGING Steady: Handset battery is charging Slow Flashing: Phone is in use Fast Flashing: Call is on hold MESSAGE Flashes when you have new voice mail (requires voice mail service from your local telephone company).
27 Appendix In case of difficulty If you have difficulty with your phone, please try the suggestions below. For Customer Service, visit our web site at www.telephones.att.com , or call 1 800 222–3111. Telephone does not work at all • Make sure the battery pack is installed and charged correctly (see page 7).
T echnical specifications 28 Appendix RF Frequency Band (Handset to Base) 912.75 MHz — 917.10 MHz Output Power 3 dBm Sensitivity -108 dBm Modulation FM RF Frequency Band (Base to Handset) 2410.
29 Appendix AC adapter, 6 Alert tones, 26 Answering calls, 12 Antenna, 7 Battery, 7 Belt clip, 9 Blocked caller/name, 20 Call logs, 21 Caller ID, 5, 20 add entries to phone directory, 24 delete entrie.
Copyright © 2003 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones. Printed in China. Issue 2 AT&T 04/01/04. 91-5596-30-00 www .telephones.att.
デバイスAT&T 1445/1145の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
AT&T 1445/1145をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAT&T 1445/1145の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。AT&T 1445/1145の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。AT&T 1445/1145で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
AT&T 1445/1145を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAT&T 1445/1145の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、AT&T 1445/1145に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAT&T 1445/1145デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
