AT&Tメーカー7630の使用説明書/サービス説明書
ページ先へ移動 of 35
Part 2 Please r ead Part 1 — Important Product Information, included in your package. User's Manual for Cordless Digital Answering System Speakerphone 7630 © 1998 Philips Consumer Communications L.
1 CONTENTS INST ALLA TION ........................................... 2 T able/Desk Installation ............................. 5 For W all Installation ................................. 6 TELEPHONE OPERA TION At the Handset ...........................
2 INST ALLA TION Put caller on hold Stor e and access numbers in telephone memory Change channel Redial last number called Answer page fr om base Adjust listening volume Activate V oice Security featu.
3 INST ALLA TION Use with other buttons to change settings Recor d/review outgoing announcement Set/hear day & time Set answering system featur es Stop message playback T urn answering system on o.
4 ! INST ALLA TION Modular jack Power cor d T elephone line cord Standar d electrical outlet Keep base antenna upright. 7630_book.1AT&T 8/12/98, 6:28 PM 4.
5 T able/Desk Installation 1 Choose a spot near an electrical outlet and a telephone jack. This phone requires a modular telephone jack and a standard electrical outlet (1 10v AC) not controlled by a wall switch.
6 NOTE: When the system is first connected to AC power , it begins an automatic initialization r outine. After this r outine is complete, the Message Counter flashes CL , indicating the clock needs to be set. See “Setting the Clock” in the Answering System Set-up section of this manual.
7 5 Feed the free end of the line cord thr ough the rectangular opening in the center of the bracket. 6 Replace the bracket. Place the bracket back on the base so that the thicker end will be at the bottom of the base when wall-mounted. 7 Connect the line cord to the wall jack.
8 Making a Call 1 Press P on the handset (the PHONE light goes on). 2 When you hear a dial tone, dial the number . Answering a Call If the handset is in the base, lift the handset. The PHONE light goes on and the call is connected. — OR — If the handset is away from the base, press P on the handset.
9 Hold Press H to put a call on hold. The PHONE light on the handset flashes. T o return to the call, press H again — OR — Press P on the handset — OR — Press K on the base — OR — Lift the handset of an extension phone on the same line.
10 Handset Locator This feature is useful if you misplace the handset. T o locate the handset using this feature, press and hold the INTERCOM/HAND- SET LOCA TOR button on the base for approximately four seconds. A repeating paging tone is sounded in the handset.
11 TELEPHONE MEMOR Y At the Handset This cordless answering system can store 20 dif ferent phone numbers that you dial by pressing p and two of the number buttons. The cordless answering system can also store a telephone number that you dial by pressing only M .
12 TELEPHONE MEMOR Y At the Handset Storing a Number Just Dialed Whenever you make a telephone call, you can store the number you dialed in memory . Press R instead of entering the telephone number when storing memory numbers. Dialing Memory Numbers 1 Press P .
13 Answering a Call T o answer using the Speakerphone, press K on the base. The SPEAKER light goes on, and the call is connected. T o end the call, press K again. Conecting to a Call With the Speakerphone Y ou can make a call at the handset, and then switch to using the speakerphone.
14 This cordless telephone answering system operates at the maximum power al- lowed by the Federal Communications Commission (FCC). Even so, the handset and base can communicate over only a certain distance — which can vary with the locations of the base and handset, the weather , and the construction of your home or office.
15 T urning the System On/Off The answering system must be on in order to use any answering system functions. When the answering system is on, the Message Counter is on (a steady or flashing display). T o turn the answering system on, press O on the base.
16 Announcement Options Before using this answering system, you can record an announcement (up to 3 minutes long) that callers will hear when the system answers a call. When you record your announcement, make sure you indicate who has been assigned each mailbox, and that callers should press 1 or 2 to access the appropriate mailbox.
17 5 When you are finished, press S . The system plays back the announcement, and the Message Counter displays AP (Announcement Play). If the announcement did not record successfully , you’ll hear an error tone indicating you need to record again . T o review the announcement at any time, press A .
18 Audible Message Alert If you want the base to beep once every 15 seconds to notify you that new messages have been received, set the Message Alert to on (the Message Counter displays + for on and – for off. 1 Press C . 2 Press and release u until you hear "Message Alert is.
19 Changing the Priority Calling Code The priority calling code comes set to 999, but you can change it to any three-digit number from 500 to 999 following the directions below .
20 Answering Calls When you’ve selected Announcement A or B and turned the system on, the caller hears the announcement you recorded, followed by a beep. During the announce- ment, callers can press 1 or 2 to select a mailbox, or they can wait for the beep to leave a message in Mailbox 1.
21 Listening to Y our Messages As the system plays back messages in a mailbox, the Message Counter displays the number of the message playing. Before playing each message, the system announces the day and time the message was received. After playing the last message, the system announces “End of messages.
22 ANSWERING SYSTEM OPERA TION At the Base Deleting Messages Delete all messages in a mailbox Press and release D , then press the l button of the mailbox you want to clear . The system announces “Messages deleted.” The Message Counter dis- plays the number of messages in the other mailbox.
23 This cordless answering system allows you to retrieve messages and access other features even when you are away from your home or office. Additionally , you can use the cordless handset to access answering system features when you are within range of the base.
24 Remote Access Commands Playing Messages 1 Connect with the answering system. 2 After the two beeps, wait 4 seconds. The system plays back messages in Mailbox 1 — OR— Press and release 1 , then .
25 Call Screening Y ou can uses the cordless handset to listen to callers as they leave messages. Y ou can speak to a caller by pressing P . T o monitor a call: 1 If the handset is away from the base, press a . 2 T o end monitoring without taking the call, press a or put the handset in the base.
26 ANSWERING SYSTEM OPERA TION At Cordless Handset or T ouch T one Phone Remote ON/OFF Review ON/OFF Status Connect with the answering system. Press ) . The system announces the current status, then beeps twice and is ready to accept a command. T urning System Off 1 Connect with the answering system.
27 11 The system announces the Priority Calling Code, followed by "T o select the first digit, press 6 or 4, then press 9." 12 Follow Step 10 to change the Priority Calling Code. 13 The system announces the current base ringer setting, followed by "T o turn on or off, press 6 or 4.
28 The handset batteries need charging when: • The phone beeps four times when you press P . • The INTERCOM/LOW BA TT light on the handset is on when the phone is off. • The INTERCOM/LOW BA TT light on the handset flashes when the phone is on. • The phone does not respond when you press P , and no lights go on.
29 Replacing the Handset Battery Pack 1 Remove the battery compartment cover on the handset by pressing on the indentation and sliding the cover downward. 2 Lift out the old battery pack and unplug it from the handset. 3 Hold the new battery pack and plug the cord into the handset.
30 If you have difficulty operating this telephone answering system, try the sugges- tions below . If you still have trouble, call 1 800 722-9125. If the phone does not work at all • Make sure the power cord is plugged into the base and an electrical outlet.
31 IN CASE OF DIFFICUL TY If you hear noise or interference when using the phone • Y ou may be out of range. Move closer to the base. • Press h to change to another of the 25 channels available. If the noise is exceptionally loud, move closer to the base before changing channels.
32 IN CASE OF DIFFICUL TY If messages are incomplete • If a caller leaves a very long message, part of it may be lost when the system disconnects the call after 3 minutes. • If the caller pauses for more that seven seconds, the system stops recording and disconnects the call.
Cor dless Digital Answering System Speakerphone 7630 ANSWERING SYSTEM OPERA TION 1 Dial telephone number and wait for system to answer . 2 Enter Remote Access Code.
Play all messages 1 , then mailbox in mailbox number Play new messages 2 , then mailbox in mailbox number Save messages Hang up Delete message being played 3 Delete all messages 3 , then mailbox in ma.
デバイスAT&T 7630の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
AT&T 7630をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAT&T 7630の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。AT&T 7630の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。AT&T 7630で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
AT&T 7630を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAT&T 7630の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、AT&T 7630に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAT&T 7630デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
